Extra Blank Lines When Using Multiple List For Groups.

Oct 9, 2007

I am working on conversion of Crystal reports to SSRS. The existing report has two level of grouping. So I have included 2 list inside a third list and then done the grouping. Is there another way to do multiple grouping ? Every thing is working fine except for getting one extra blank page at the end of report with only header and footer. I have properly checked the body height and width and page margins. It has something to do with list but i cant figure out what.

View 1 Replies


ADVERTISEMENT

Visual Studio-extra Blank Page

Feb 13, 2007

I am a novice Visual Studio user. When creating reports in Visual Studio, I get an extra blank page with a report heading when I save the report as a .pdf and print from Adobe. I recently created a report with 2 grouping levels and I get 2 blank pages (w/report header only) between every full detail page. I've checked my report properties and grouping settting several times. I've also checked the properties for each of the lines defined in my report and nothing indicates that it would cause a problem. Note: My report consists of a header, a body with a table-header-detail-2 grouping levels-footer, and a report footer. I would REALLY appreciate any suggestions for solving my problem. Also, when I view the report on the Preview Pane it looks exactly as I would expect. The extra pages only appear when saving as a .pdf and printing from Adobe.:confused: :confused: :confused: :confused:

View 1 Replies View Related

Extra Blank Page Printing At The End Of The Report

Feb 20, 2008

Hi,

I have report with a list and a table inside it.

I want each item of the list in a new page.
So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.

But printing or exporting the report, a blank page with just the header and the footer is printing.

Is there a way to remove this last extra blank page?

Thanks for your time.

Navya.

View 5 Replies View Related

Bcp/BULK INSERT And Blank Lines

Jul 18, 2006

Does anyone know of a way to make BULK INSERT or bcp ignore blank lines in the file? I am having trouble with a bunch of data files coming back with 1 or 2 blank lines at the end, and it causes the entire bcp to fail.

I suppose I could write a utility to trim the files but that seems a bit overkill. Any thoughts?

View 4 Replies View Related

PDF Format Print Extra Blank Page With Header

Nov 6, 2007

Hi,

When I Preview my report then it's fine only 2 pages with no blank page with header in between.

I then deploy it & open via web.

But when i export to PDF & print it pints 3 pages with the first being a blank page with header.

Any Idea what I'm doing wrong?

Regards,

View 2 Replies View Related

BCP Import With Blank Lines In Text File

Jan 4, 2007

I am trying to bcp import a text file into a SQL Server 2000 database.The text file is coming out of a java application where orderinformation is written to the text file. Each record is on it's ownrow, so the last item in each record has a new line character at theend of it to create the next row. This works well in creating the filehowever bcp does not like to import this text file with the extra blankline at the end. If I change the new line character to the beginning ofthe records then there is a blank line at the top of the text file,which bcp also does not like. Does anyone have any suggestions for meto get around this issue?Thanks,

View 6 Replies View Related

SSIS: Multi-Record File Using Merge - Getting Blank Lines

Mar 27, 2008

I have used the following useful article regarding exporting a multi-record file:
http://vsteamsystemcentral.com/cs21/blogs/steve_fibich/archive/2007/09/25/multi-record-formated-flat-file-with-ssis.aspx

I have created the 9 datasources, ordering each on a field commmon to all.

I have created the required derived columns headers and have merged all the record types into a file.

The resulting file looks fine, except for the odd blank line between record types. Any ideas regarding cause and what to do to fix?

Any help is most appreciated!

View 10 Replies View Related

Problem With Matrix (in Subreport, Multiple Groups), Groups Repeating First Row Data

Jan 25, 2008

I have a new SQL 2005 (SP2) Reporting Services server to which I've just upgraded and deployed some SSRS 2000 reports.

I have a subreport that contains a matrix with two groups. The report data seems to be inexplicably repeating the data for the first row in the group for all rows in the group. Example:









ID1
ID2
DisplayData

1
1
A

1
2
B

1
3
C

2
1
A

2
2
B

2
3
C

Parent group is on ID1, child group is on ID2, report would show:








1
1
A

2
A

3
A

2
1
A

2
A

3
A


Is this a matrix bug in 2005 SP2, or do I need to do something differently? I can no longer pull a comparison version from an SSRS 2000 server to verify, but I believe it was working as expected before...

View 2 Replies View Related

Matrix Reports Spawn Extra Page - Enclosing In List Fixes This.

Apr 20, 2007

We really like using the Matrix reports, but we were finding that every Matrix report that we created would spawn an extraneous blank page. We tried putting the matrix in a rectangle, which works well for positioning other items on reports, but this had no effect on the problem.



Then we tried placing the matrix in a list with the list group details set to "=Nothing". It worked great - no more extra pages. Looked and didn't see this tip mentioned elsewhere so thought it might be worth sharing.

View 1 Replies View Related

How To List All File Groups

Jul 20, 2004

How to list all the file groups

View 1 Replies View Related

How To Get List Of Windows Users And Groups?

Jan 9, 2008

I want to map users/groups of a .NET application which uses MS SQL Server to Windows users/groups. Then grant pemission to the Windows users/groups to access the MS SQL Server.

If possible, I want to list Windows Users and Groups regardless of whether Active Directory is used or not.

View 1 Replies View Related

Reporting Services :: How To Create Report With Multiple Rows With One Parent And Multiple Child Groups

Aug 17, 2015

I am in the process of creating a Report, and in this, i need ONLY the row groups (Parents and Child).I have a Parent group field called "Dept", and its corresponding field is MacID.I cannot create a child group or Column group (because that's not what i want).I am then inserting rows below MacID, and then i toggle the other rows to MacID and MacID to Dept.

View 3 Replies View Related

Transact SQL :: List All File-groups For All Databases?

May 27, 2009

I would like to SELECT all filegroup on an SQL server instance, is that possible?Or only per database?

View 21 Replies View Related

List Causes Adobe To Leave Blank Page When Exporting

Jan 11, 2008

Hi,

My report page settings are as follows

page width 28cm
page height 21cm

all margins 1cm

My report when rendered to the screen outputs the correct number off pages...HOWEVER when i export it to adobe i get a trailing blank page which accompanies each page break.

Can anyone please help ?

My report has a table which is bounded to a list with separate fields at the top of the list specifying the username in a text field and the table displays the user details, For each user there is a page break.

I have notice when i got rid off the list everything is ok, however the list seems to be within the boundaries of the report

View 5 Replies View Related

Executing Multiple Lines Of Sql Via C#

Jan 27, 2008

I am generating hundreds of lines of sql with a tool and wish to execute is in runtime. The sql consists of table creation, procedure creation, aswell as inserts and updates. When i try with SqlDataAdapter I get an error. Does anyone have a solution on what I can do?         

View 2 Replies View Related

Output Returning Multiple Lines

Sep 29, 2004

I am running this stored Prcedure and getting multiple lines for the output. Below are the queries the create the temp table (its holding the data), and the query that generates the output:

/* this creates the temp table */
Select count(*) as 'Donations', d_vst_id
into Donations_temp
from dnr_vst_db_rec
where convert(varchar(10),d_vst_date) between convert(varchar(10), @Beg_Vst_Date, 112) and convert(varchar(10), @End_Vst_Date, 112)
and d_vst_status = 'DN'
and d_vst_dontyp in ('E1', 'E2')
group by d_vst_id

/* this query generates the output */

select distinct cast(getdate() as varchar(30)) as 'TODAY'
,CONVERT(varchar(10), @Beg_Vst_Date,101) as 'BEGDTE'
,CONVERT(varchar(10), @End_Vst_Date,101) as 'ENDDTE'
,case Donations
when '1' then sum(1)
else 0
end as 'ONE1'
,case Donations
when '2' then sum(1)
else 0
end as 'ONE2'
,case Donations
when '3' then sum(1)
else 0
end as 'ONE3'
,case Donations
when '4' then sum(1)
else 0
end as 'ONE4'
,case Donations
when '5' then sum(1)
else 0
end as 'ONE5'
,case Donations
when '6' then sum(1)
else 0
end as 'ONE6'
,case Donations
when '7' then sum(1)
else 0
end as 'ONE7'
,case Donations
when '1' then Sum(0)
when '2' then Sum(0)
when '3' then Sum(0)
when '4' then Sum(0)
when '5' then Sum(0)
when '6' then Sum(0)
when '7' then Sum(0)
else Sum(1)
end as 'ONEA'
from Donations_temp
group by Donations

Thanks.

View 1 Replies View Related

Help Deleting Multiple Lines In A Table

Feb 28, 2007

Hey all,

I know very simple SQL queries but I need help with this one. I have multiple lines in a SQL database that I need to run. Basically, I need to run this (the bracketed text and the XXX are place holders):

DELETE FROM [tableName] WHERE [columnName] = 'XXXXX'

But I need to run it around 90 times where XXXXX is a unique variable each time. I could create 90 lines similar to this one but that would take way too much time to run. Any suggestions for a noob?

Thanks,

- MT

-=<>=-=<>=-=<>=-=<>=-=<>=-
Matt Torbin
President
Center City Philadelphia Macintosh Users Group
http://www.ccpmug.org/

View 3 Replies View Related

How To Put Multiple Lines In A Varchar(MAX) Column?

Apr 24, 2007

how to put multiple lines in a varchar(MAX) column?



when I cut&paste it only pastes up to the first newline

CTRL/ENTER does not work (like it does in an Access memo column for example)



there must be a way to put multiple lines



help will be appreciated

View 6 Replies View Related

Reporting Services :: Preview Has One Extra Parameter Than Parameter List - SSRS

Aug 21, 2015

I am working on existing ssrs report. When I see the preview I could see the extra parameter than the actual parameter. 

How do I know , when this parameter is coming in the preview ?

View 5 Replies View Related

Report Designer: Need To List Fields From Multiple Result Rows As Comma Seperated List (like A JOIN On Parameters)

Apr 9, 2008



I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.

However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).

For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).

Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac


How can I accomplish this?

I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.

Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?

View 21 Replies View Related

Display Column Data In Multiple Lines

Apr 14, 2014

I have data like this

TableA

ID JunkData
1 1234jdueakj34jfjj4
2 345j5uttuvj5575jkf
3 sjhsdfk283ncfkjsf9

I need the Result to display like this. Split the JunkData Column Data in multiple lines, each line should contain 5 characters.

ID JunkData
1 1234d
ueakj
34jfj
j4
2 345j5
uttuv
j5575
jkf

View 2 Replies View Related

Split Column Data Into Multiple Lines

Jan 2, 2008



Hi,
I have a scenario, where I have a string column from database with value as "FTW*Christopher,Lawson|FTW*Bradley,James". In my report, I need to split this column at each " | " symbol and place each substring one below the other in one row of a report as shown below .

"FTW*Christopher,Lawson
FTW*Bradley,James"


Please let me know how can I acheive this?

View 3 Replies View Related

SQL Search :: Delete Multiple Lines Using Loop

Aug 31, 2015

How can I run through an array of ID's and delete the fields associated to it in a single table?  I have a lot of bad data that needs to be removed.  BTW, I'm using the SQL Server Management Studio to do this.

I'm currently doing by hand by using the following.

USE database;
DECLARE @id integer
SET @id = XXXXX
DELETE FROM table WHERE id = @id;

I would like to use the same code but with a slight variation to support an array.

View 4 Replies View Related

Produces Multiple Lines, Need To Populate Single Line

Mar 11, 2008

I need to, ultimately, create a flatfile for exporting insurance information to a third-party vendor. Each individual is to have no more than 1 line per file, which contains their coverage information, if any, on 4 different type of insurance. What i need is for 2 fields in a table to determine the output for multiple fields in the flatfile.

What I have so far works, to an extent. If I have insurance types 1, 2, 4 (of types 1-4) required output is (__ = 2 blank spaces):



1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E

== == == == == == == == == == == == == == == == == == == ==

Y N __ MD XX Y N __ MD XX N __ __ __ __ Y N __ DN XX



If they have coverage, A always = Y, B always = N, C always = blank(null), D is their ins. type, E is their cov. type(CASE statement). if they DON'T have that type of coverage, A always = N and the remaining field are NULL.



After a lot of work, and scouring a forum or 2, I attempted a whole lot of CASE functions. Below is an sample of code representing the 1x statements. This same code is repeated 4 times with the 1x being altered with 2x, 3x, 4x.



CASE HB.PLAN_TYPE

WHEN '10' THEN 'Y'

ELSE 'N' END AS 1A,

CASE HB.PLAN_TYPE

WHEN '10' THEN 'N'

ELSE ' ' END AS 1B,

' ' AS 1C,

CASE HB.PLAN_TYPE

WHEN '10' THEN HB.BENEFIT_PLAN

ELSE ' ' END AS 1D,

CASE HB.PLAN_TYPE

WHEN '10' THEN (CASE WHEN HB.COVRG_CD ='1' THEN 'XX'

WHEN HB.COVRG_CD ='2' THEN 'YY'

WHEN HB.COVRG_CD ='3' THEN 'ZZ'

ELSE 'WW' END)

ELSE ' ' END AS 1E,



It works to an extent. While the desires/required output it above, the output this produces (same scenario) is:



1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E

== == == == == == == == == == == == == == == == == == == ==

Y N __ MD XX N __ __ __ __ N __ __ __ __ N __ __ __ __



1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E

== == == == == == == == == == == == == == == == == == == ==

N __ __ __ __ Y N __ MD XX N __ __ __ __ N __ __ __ __



1A 1B 1C 1D 1E 2A 2B 2C 2D 2E 3A 3B 3C 3D 3E 4A 4B 4C 4D 4E

== == == == == == == == == == == == == == == == == == == ==

N __ __ __ __ N __ __ __ __ N __ __ __ __ Y N __ DN XX



While there is supposed to be 1 line, regardless of number of insurance types, it only produces 1 line per type. I first tried this in Access, and was able to get it to work, but it required multiple queries resulting in a crosstab, export to Excel and manually manipulate the data, export to text file to manipulate, import back into Excel to manipulate, import back into Access and finally export into a flatfile. Far too much work to produce a file which is why I'm trying to convert it to raw SQL.
Any assistance in this matter would be greatly appreciated.

View 5 Replies View Related

Select Statement Which Enables To Consolidate Multiple Lines In Same Table

Nov 15, 2012

I am in doubt if its possible to make a select statement which enables me to consolidate multiple lines in the same table.

I have a table with a lot of companies and figures for each company.

Some of the companies owns some of the other companies in the table and in reverse, some of the companies are owned by some of the companies in the table.

I have a lot of columns, but basically the most important columns are:

Company Name, Company Mother , Company Daughter.

Each company has also a revenue column.

What I want to do is to consolidate all figures for absolute mothers e.i. companies which are not owned by another company in the list.

I therefore need a select statement which says something like:

Get the revenue of companies not owned by another company (e.i. absolute mother). Add to this, the revenue of all its daughters. Add to this the revenue of all the daughters daughters etc. until there are no daughters left.

In other words - aggregate the revenue for all the companies in the group under the name of the ultimate parent company.

I can easily select and add the revenue for the first level of direct daughters, but I dont know how many more daughters the daughters has etc.

View 2 Replies View Related

Transact SQL :: Convert Multiple Lines With Different Values In Value Columns In 1 Line

Dec 1, 2015

I have this query:

SELECT
          ID1,
          ID2,
          type,
          (case when type = '1' then sum(value) else '0' end) as Value1,
          (case when type = '3' then sum(value) else '0' end) as Value2,
          (case when type <> '1' and type <> '3' then sum(value) else '0' end) as Value3
FROM table1 WHERE ID1 = 'x' and ID2= 'y' 
GROUP BY ID1, ID2, Type

Which returns:
ID1     ID2        Type     Value1     Value2     Value3
005    11547    0          0.00         0.00        279.23
005    11547    1          15.23       0.00        0.00
005    11547    3          0.00         245.50    0.00

And I want to obtain this result:
ID1     ID2        Value1     Value2     Value3
005    11547     15.23       245.50    279.23

View 5 Replies View Related

Transact SQL :: Parse Unknown Number Of Data Elements To Multiple Lines

Jun 11, 2015

We are using a table that may give 1 to and unknown number of data elements (ie. years) .   How can we break this to show only three years in each row.  Since we don't know the number years we really won't know the number of rows needed.  Years are stored in their own table by line.  
 
car make year1 year2 year3
A   volare 1995 1996 1997
a   volare 1997   1998   1999
b toyat  1965    1966   1968

We can pivot out the first X# but we don't know how many lines so we don't know how many rows we will be creating.

View 8 Replies View Related

Users In Multiple Groups Within One Database

Dec 10, 1998

We are trying to setup security on our Sql Server. We are using Integrated
Security.

The problem we are having is that we need to have a user belong to multiple groups within one database. The user would have different rights depending upon which group they belonged to.

So far we have not found anyway to accomplish this setup.

I would appreciate any ideas/thoughts on this matter.

Thanks,

Tracy Young

View 1 Replies View Related

Counting Customers That Are In Multiple Groups

Feb 19, 2013

I have a large table that tells me customers and mailings (~4 million rows). So for each customer, I see what mailing(s) they received. It is at the mailing level so if a customer received 2 mailings, their will be 2 records for that customer number, one for each mailing they received. There are 3 different mailings.I am trying to calculate the count of customers that received all 3, as well as those that received 1&2 only, 1&3 only, and 2&3 only. For example:

CustNo Mailing
Tim 1
Tim 3
Dan 1
Dan 3
Jane 1
Max 1
Max 2
Max 3
Lauren 2
Lauren 3

Results:

All 3 - 1
1&2 only - 0
1&3 only - 2
2&3 only - 1

I have tried doing some funky table joining and EXISTS, but the query runs and runs because of how much data it has to sift through. Here is the code I am using to find Mailing 1&2 only customers, but I am not even sure it is getting me the right numbers. There are 2 different types of customers as well which is why I have custtype in there.

Code:
select a.custtype,count(distinct a.custno)
from myTable a
inner join (select distinct custno from mytable where [mailing]=2) b
on a.custno=b.custno
where a.[mailing]=1
and not exists(select * from myTable c where a.custno=c.custno and c.[mailing]=3)
group by a.custtype

View 14 Replies View Related

SQL 2012 :: Multiple Availability Groups On One Instance

Aug 12, 2013

From what I understand, one SQL Server 2012 instance can host multiple availability groups. That should allow, for example, the following situation - one SQL Server 2012 instance containing three primary replica databases - each one part of a different availability group - and each availability group's secondary replica located on a separate SQL Server 2012 instance.

Can you have three SQL Server 2012 instances, each with one primary replica database and have all three secondary replica databases on one SQL Server 2012 instance? So instead of, as above, going from 1 primary server to 3 secondary servers, this time we're going from 3 primary servers to 1 secondary server? The one secondary server would then contain all three secondary replicas for each of the 3 separate primary replicas.

This would mean that the single server (where all three secondary replicas reside) was part of three separate Windows Server Failover Clustering clusters.

Is this scenario possible?

View 4 Replies View Related

List Groups That Have Access To Application And Use Grid Format To Show Access To Specific Tables

Jun 23, 2014

i am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.

I am currently working on designing a database for a bank as a school project for my database class. We have to draw up an entity relationship diagram, Sql tables, database size estimate etc. I am currently working on the security portion of the project. I need to list the groups that have access to my application and use a grid format to show access to specific tables.

Role Loans Payments Transactions Accounts Customer Emplo
Database Admin SUID SUID SUID SUID SUID SUID
Branch Manager SUI SUI SUI SUI SUI SUI
Internal Auditor S S S S S S
Loan Officer SUID SUI SUI S S
Tellers S S S S SU
Customers U

View 1 Replies View Related

Printing Table Rights From Multiple Security Groups

Jun 10, 1999

I have multiple security groups for which I would like to print off the
different table rights associated. Is there a quick and easy way to
accomplish this? Thanks, Craig.

View 1 Replies View Related

Reporting Services :: Matrix With Multiple Row And Column Groups

Jun 1, 2015

I have one matrix with multiple row & column groups which is not looking nice.

See the below image. The reason for having a Matrix is they can create any no of Tests.

In the above image i have two row groups Test Type and Test Date and column groups as TestDesc and my required format is .

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved