Extra Blank Page Printing At The End Of The Report
Feb 20, 2008
Hi,
I have report with a list and a table inside it.
I want each item of the list in a new page.
So I checked the "Insert page break after this table" of the table properties to make sure that the next table is rendered on the next page.
But printing or exporting the report, a blank page with just the header and the footer is printing.
Is there a way to remove this last extra blank page?
Thanks for your time.
Navya.
View 5 Replies
ADVERTISEMENT
May 16, 2008
Hi All,
In my SSRS report. I have a report which has only one page. In preview it is showing as only 1 page but when I am printing the report. I am getting two printouts with the second page as a blank.. Please help me in printing the page that contains report. Intially I used a Page header, at that it used to print the blank page with a header only. Now as I removed the header it is printing the page without header i.e Blank Page.. So please help me in prinitng a single page that has the report. It is urgent,..
Thanks
dotnetdev1
View 5 Replies
View Related
Jan 23, 2008
I'm hoping that someone can shed some light on this for me... I'm using SSRS SP2 and I have a basic report using a single list object which, at the moment, should print only two pages based on the results of the underlying query. When previewing the report, it shows the two pages. But when the report is printed or exported, there is a blank page before each report page.
What I've done so far:
1) Verified the properties of the list object and made sure that 'Insert a page break before this list' is not checked
2) Ensured that there are no hidden objects that could be causing this behavior
3) Ensured that the report size + margins are within the boudaries of an standard 8.5x11 paper size
Any suggestions on something that would solve this issue?
Sam
View 6 Replies
View Related
Apr 15, 2008
In SRSS 2005 (SP2) my page header seems to take up the same amount of space on the
1st page it would take if it were to print; I have PRINT ON FIRST PAGE set to
false - the header doesn't print - it just leaves the same amount of space.
How do you get the report to ignore that. I do have a report header built
into the body of my report. I have tested this by increasing the size of my
page header and it does move the report up or down on the 1st page by that
amount.
View 8 Replies
View Related
Feb 13, 2007
I am a novice Visual Studio user. When creating reports in Visual Studio, I get an extra blank page with a report heading when I save the report as a .pdf and print from Adobe. I recently created a report with 2 grouping levels and I get 2 blank pages (w/report header only) between every full detail page. I've checked my report properties and grouping settting several times. I've also checked the properties for each of the lines defined in my report and nothing indicates that it would cause a problem. Note: My report consists of a header, a body with a table-header-detail-2 grouping levels-footer, and a report footer. I would REALLY appreciate any suggestions for solving my problem. Also, when I view the report on the Preview Pane it looks exactly as I would expect. The extra pages only appear when saving as a .pdf and printing from Adobe.:confused: :confused: :confused: :confused:
View 1 Replies
View Related
Nov 6, 2007
Hi,
When I Preview my report then it's fine only 2 pages with no blank page with header in between.
I then deploy it & open via web.
But when i export to PDF & print it pints 3 pages with the first being a blank page with header.
Any Idea what I'm doing wrong?
Regards,
View 2 Replies
View Related
May 3, 2007
I have deployed a report that is configured for landscape printing. It does print in landscape, however, only the first seven columns appear on the first page and the other five columns appear on the next page. Is there a method, like in print preview setup in MS Excel, where we can scale down the print (like to 80%) so all columns appear on each page?
Thanks!
View 3 Replies
View Related
Apr 5, 2008
Hi ,
I have developed some report in Sql Server Reporting services my Page orientation is portrait that is report height and width are 8.5 and 11 respectively and margins are set to 0.3 in when it is printed the pages are printed more that actually viewed Pages.
I need help from someone.
Thanks,
Nikhil
response2nikhil@hotmail.com
View 7 Replies
View Related
Oct 11, 2007
Hi there.
We have a report that has been working fine for almost a year and just recently we found a bug that when we print, the 1st 3 pages each have a single line from the table header and then the details of the table print.
The report table does have 2 subreports in detail rows. We have diligently checked to make sure that the sizes fit in both the main report and the subreports and we know that the report version did not change.
After a little digging we discovered that we recently patched RS to be version 9.2.3042. When we run the report on another RS server that is running 9.00.1406.00, it works fine. Do you know if this could be the cause? If so, is there another patch that addresses the issue?
Any help would be appreciated.
Thanks, Mike
View 3 Replies
View Related
Nov 23, 2007
Hi All,
I am desging my report with few text boxes , List , Matrix Tools and binding them with proper fields
if matrix having no data it is working fine
but when ever the matrix having data, then also it is working but am Getting One extra empty page
why this is happening i am not getting
plz help me some one
View 10 Replies
View Related
Apr 16, 2008
Hi every one,
I am facing problem in printing the reports from browser and also when i export it to pdf,the problem i am facing is blank pages are coming when report column getting the large amount of text around 2500 characters into column value.
can any one help me in this issue?. if the report is getting acceptable amout of data it is printing in proper way i.e no balnk pages at all.i maintained all properties like margins+body size < page size.
View 4 Replies
View Related
Sep 26, 2007
hello there,
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005.
please help
cheers
zolf
View 1 Replies
View Related
Sep 26, 2007
hello there,
i have created a report now i want to have the report print on one page instead of two pages which is doing now.how can i do that.i am using SSRS 2005.
please help
cheers
zolf
View 3 Replies
View Related
Jan 10, 2008
I have report with a table, that generates rows to more than 1 page. When the user prints the report, each page should show the table header.
Presently or by default , the table header is shown(printed) only on the first page.
Please let me know, how can I achieve this.
View 4 Replies
View Related
Mar 9, 2007
Hi all. My name is Guilherme and I'm a Braziliam software developer.
I've installed on my computer all the software required to work with MS SQL RS. I log on this computer using my domain user. and a few days ago i needed to change my password (network policy)
Now, when I open the adress http://localhost/reports on my computer, I can't see the installed reports, neither the configuration page.
What should I do?
Thanks in advance.
View 1 Replies
View Related
Oct 18, 2007
All I see is:
SQL Server Reporting Services
Home
Home | My Subscriptions | Help
Anyone any ideas on how I get the rest of the page back?
If I go to the reports home page, I get:
Reporting Services Error
The permissions granted to user 'NT AUTHORITYIUSR' are insufficient for performing this operation. (rsAccessDenied) Get Online Help
SQL Server Reporting Services
I'm using Vista Ultimate and SQL Server 9.0.3159.
View 6 Replies
View Related
May 21, 2006
Hi,
I'm getting blank page when I open the Report Manager: I've got a header - "...Reporting... HOME", and then just empty space.
I had it working fine a week ago. Any ideas?
The RS runs on Win2003 Std, SQL 2005 Std.
Thanks
View 26 Replies
View Related
Apr 18, 2008
I build a long report in sql reporting(5 pages)
It has many lists.
on the 3rd page it is inserting a blank page with just the report header
I check the list before and after the page
Insert Page break before and after is "unchecked" on both the list and its grouping.
Is there anything else I can verify to find a solution to print no blank pages. The client will have my head if it is there.
Nick
View 4 Replies
View Related
Sep 22, 2015
I have a set of SSRS reports published on the server. It can be accessed through a web application or through SharePoint. Most of the reports work fine through both - web app and SharePoint. However, one of the report, which returns large amount of data has some problem:
1. It generates fine from web app
2. It generates fine from SharePoint; only if one or two values selected from Filter dropdown
3. However, if all items (about 20 items) selected from Filter dropdown... and click on View Report, it processes for a while and then shows nothing. The page remains blank.
Did some research and felt the problem is with Distributed Cache Service.
Tried restarting it; tried changing SPDistributedCacheClientSetting settings - requestTimeout, channelOpenTimeout... but didn't work.
I checked Event Viewer logs, SharePoint logs and SSRS logs but couldn't find any relevant error messages.
View 5 Replies
View Related
Oct 9, 2007
I am working on conversion of Crystal reports to SSRS. The existing report has two level of grouping. So I have included 2 list inside a third list and then done the grouping. Is there another way to do multiple grouping ? Every thing is working fine except for getting one extra blank page at the end of report with only header and footer. I have properly checked the body height and width and page margins. It has something to do with list but i cant figure out what.
View 1 Replies
View Related
Aug 10, 2015
So I have been asked by our sustainability person to create report from our printing data that actually shows the number of pieces of paper used. This is easy enough for single-sided printing, but when printing in duplex the software does not take into account that 3 printing pages actually equates to 2 pieces of paper. I know this sounds simple, but say I have a print job record that looks like this:
Submitted printed total_pages duplex
8/10/2015 8/10/2015 42 1
This is a print jobs that if done correctly is actually 21 pages( duplex printing). If the job is say total_pages =5 I cant just divide by 2 because its actually using 3 pieces of paper ( yes they are wanting this data don't ask why). How can I adjust some sql to accurately depict 5 pages, front and back, as 3 pieces of paper?
View 2 Replies
View Related
Jul 18, 2007
I ahve a report, that has 24 fields in the layout. When I tried to print the reprot, it prints BLANK pages, in between and at the start. I have confirmed that the width BODY of the report, < width of the report properties. It still prints blank pages.Pl advise.
View 1 Replies
View Related
Mar 31, 2007
hi i am very concerned about this problem in my report.
to solve this problem i increased the height of page footer,blank page vanishes but the page footer is not printing on every page,it is only printing on 1 st page .
i am having probelm because the records from the dataset are more than the page limit , page break is there but no footer is printing on the second page only blank space is there.
can u please help me out from this problem??
View 1 Replies
View Related
Dec 6, 2007
I have a report with several matrix objects. The data contained in each matrix is simple. One matrix has one column of labels and a column of data. The other has 3 columns of data. Both matrix's only show about 25 rows of data. A variable amount of data is displayed above the matrix's so that sometime the render across a page boundary. Whenever this happens the matrix doesn't render rows down to the bottom of the page. A considerable amount of empty space is left on the page, the completed matrix is displayed on the next page. I'm wondering how to get the matrix to render in this empty space.
This problem only occurs when I view the report on screen, in the Visual Studio "Preview" window, or from the Report Server web site. Tiff, pdf and printed output doesn't contain the extra space.
I've tried adding my matrix to a List and a Rectangle to see of this would fix the problem but it didn't help.
I've check the dimensions and margins or the page and I don't think I have any sizing problems, everything should fit on the page.
--Mark
View 1 Replies
View Related
Jul 11, 2006
Hello,
When I export to PDF or Tiff, I am getting an extra blank page at the bottom of the document. Any ideas what might be causing this blank page during my export?
BTW...SSRS 2005 SP1
TIA!!!!
View 5 Replies
View Related
Jan 18, 2007
I keep getting extra space at the bottom of each page on my report when it is deployed to the web server but I don't get this extra space on the report server. Does anyone know if this is in the report layout or if the problem is in the web page itself?
Thanks,
View 1 Replies
View Related
Oct 26, 2007
I want to add an extra blank page after my group, anyone know how to do this? More specifically, I have a report that is grouped by State, when printing I want a blank page to appear before the start of a new State, this will help when the user prints duplex, etc.
View 9 Replies
View Related
Apr 2, 2007
Hi All,
I am having a main report having two subreports, say M1,S1 and S2 respectively.
The issue is S2 normally tend to go beyond one page, for all pages except first page of the of the subreport I am getting the page header and footer blank,
Actually this is not loading the ReportItems that are used in main report but it shows text boxes containing strings for eg . "My Name" and date functions eg Today()
Any Solution?
Thanks and Regards
Pragash
View 1 Replies
View Related
Apr 20, 2007
We really like using the Matrix reports, but we were finding that every Matrix report that we created would spawn an extraneous blank page. We tried putting the matrix in a rectangle, which works well for positioning other items on reports, but this had no effect on the problem.
Then we tried placing the matrix in a list with the list group details set to "=Nothing". It worked great - no more extra pages. Looked and didn't see this tip mentioned elsewhere so thought it might be worth sharing.
View 1 Replies
View Related
Jul 25, 2007
Hi again! Now that I have fix with your help, my layout problem, I got a new one. LOL!!!!
Now my problem is when data in a report need to go on two page. The printer's give me a header on one page and a body on a second page instead of a header with a part of the body and the rest on a second page with a repeating of the header.
Following me?
Now can you help me?
Thanks in advance.
Daniel
View 9 Replies
View Related
Dec 26, 2006
I am using vb.net. and sql server 2005 reporting services. But the report in question uses the local report functionality.
I am writing a credit card processor that prints a slip at the end of the transaction. There is an annoying message form that pops up on the screen stating that it is "Printing Page 1 of Document" . It seems to be beyond my reach. Its position is the typical windows auto positioning (ala cascade). I dont want the user to see it.
How do i surpress this printing message? Is it embedded in the printer driver or spooler services? Is it surpressable from the reporting services local report configuration?
Thanx
View 1 Replies
View Related
Nov 22, 2007
What we've found is that when you have two reports where one navigates to the other, if you click on the second page of the second report, it takes you to the second page of the original report. If you navigate over to the subreport again and click for the second page, it works appropriately. This is definitely a no-go for production code and this may delay our ship date because I would think this is definitely undesirable.
Conditions:
ASP.NET Report Viewer using Remote Reports
Report that links to another report
Both reports return more than one page
Reporting Services installed
Steps to Reproduce:
Download the source code here.
Follow the directions (near the bottom of the post) to get the project set up.
Run it and click on a link in the first report to go to the second report.
Click the arrow for page 2 of the second report.
Notice how it takes you back to page 2 of the first report (this doesn't happen when you are in preview mode in the Reporting Services project and I don't believe it does this in a smart client application).
Click on a link in the first report to go back to the second report.
Click the arrow for page 2.
Notice how it takes you to page 2 of the second report.
Here is a link with source code and a more detailed explanation: http://geekswithblogs.net/robz/archive/2007/11/21/Reporting-Services-2005-BUG-Report-Linking-and-Paging---ASP.NET.aspx
So what I am looking for is both a workaround for now and if this is determined to be a bug, to be fixed in the next service pack.
View 6 Replies
View Related
Mar 19, 2008
Hi,
Can some reporting expert suggest me how to acheive following scenerio?
I have simple long running Table reports having usually more then 500 rows.I want that in excel I should have 100 rows in each page.I can create a group having =Int((RowNumber(Nothing)-1)/100) and enabling page break at the end
But I also want that header to be repeated across all sheets in excel,Can I do that?
-Thanks,
Digs
View 3 Replies
View Related
