I have a form in Notes that is huge. I need to extract a part/field from that form into SQL SERVER. If I use NotesSQL Thru SQL DTSPackages, I am afraid it will run very long. Is there any other option on that?
Any help is appreciated.
I need to be able to bring data from Lotusnotes into SQL Server 2005, using OPENQUERY OR OPENROWSET.
What OLE DB provider do I need to use to setup LINKED SERVER TO Lotusnotes ? Pl advise.
can someone point me into the right direction. i want to link the sql server mail to our notes server so i can get alerts and notifications and such !
thanks
kim
Hi!
I'm analyzing the problem of extracting data from sql server 6.5 in order to load it into oracle.
I already know about the bcp tool, but I'd like to know if you would consider any other approach based on SSIS, or any other tool like SQL Load.
regards, and thanks in advance for your help.
Has anyone been able to solve the issue with setting up a package in EM, which connects to an Exchange(.edb) database and extracts the data into a SQL Server db. Previous message posts don't offer much insight. So far, all I have is using Access 2000, to connect & move the data, then extract from here.
Thanks in advance for any help.
BV
Hey all, WE have a document management system where by Adminstrators can upload documents, once the document is uploaded the binary data is stored on in a folder on the web server. We used to stored the documents in the actaul db table, but we found that there were to many documents and it was using alot of space on db server. So my boss has decided we are now going to upload the binary data onto the web server. Currently we are donig this with new documents which have been added or documents which are gettinguploaded when reloading, but there are many documents in the db table which have not been updated and are still embedded in the db table. So i need to figure out how to go about copying the data storewd in the db table and storing it in web servers folder location. I've tried various things for a enitre day but im going round in circiles. MemoryStream mStream = new MemoryStream((Byte[])dtrResults["file"]); BinaryReader bReader = new BinaryReader(mStream); int intFileSize = (int)mStream.Length; Byte[] byteFile = (Byte[])dtrResults["file"]; i can get to this state but then how do i create a folder on the BinaryREader to then store the binary data of the file to the location. BinaryReader bReader2 = new BinaryReader(File.Open(strDocFolder + strSavedFileName, FileMode.Create)); int count2 = bReader2.Read(byteFile, 0, intFileSize); bReader2.Close();i've also tried this but when the file gets created in the folder there is no content. i do know that the file does contain content as ive tried this and downlaoding the file from that page acctually works string strContentTpe = WValue.WStr(dtrResults["contenttype"]); int intFileSize = VValue.VInt(dtrResults["filesize"]); / Byte[] byteFile = ((Byte[])dtrResults["file"]); //Downloads the data correctly Response.ClearContent(); Response.ClearHeaders(); Response.AddHeader("Content-Disposition", "attachment; filename="" + WValue.WStr(dtrResults["docfilename"]) + """); Response.AddHeader("Content-Length", WValue.WStr(intFileSize)); Response.ContentType = strContentTpe; Response.BinaryWrite(byteFile); I hope ive made some snese andthat someone can hlep me. Have a nice dayZal
View 2 Replies View RelatedI have a coworker who needs to extract data from Oracle into SQL Server 6.5 and Sybase as part of an interface that runs daily. How is the best way to do this?
Tony
I'm trying to extract some data from an XML column, into the demo below I would like to obtain the CommandText value but my attempts so far are in vain, I'm fairly sure its just a path issue in the .query command but I just can't seem to get it to work.
create table #demo (field1 xml)
insert into #demo (field1)
values ('<SharedDataSet xmlns:rd="http://schemas.microsoft.com/SQLServer/reporting/reportdesigner" xmlns="http://schemas.microsoft.com/sqlserver/reporting/2010/01/shareddatasetdefinition">
<DataSet Name="DataSet1">
[Code] ....
I am running an hotel application for all the bookings.
I would like to get all the data of all the guests that stayed in the hotel (name, stay duration and dates, payment, etc).However, the GUI would make me go over one booking at a time, which would take me forever.
The application has an SQL database locally on my computer.
Will I be able to use SQL server and extract all the guests data from the last year and export it into a file, e.g. A CSV file?
Hi All,
We are extracting the data from ORACLE databse into SQL Server 2005 database. Both are hosted on different servers.
For this we have created linked server on SQL Server and we using the OPENQUERY to extract the data. Its taking too much time to extract the data.
Is there any other alternate thing for OPENQUERY clause.
Please help me on this.
Thanks in advance.
Thanks,
Ramesh.
Dear Sir/Madam,
I have some data which is stores in Foxpro dbf files & Access 200 MDB file. Can i extract import these files into SQL Server 2005
Is there a way of extracting data from MS Excel using MS SQL Server 2005 Express?
View 1 Replies View RelatedI am using MS SQL 2008, and I am trying to extract data from a MySQL database. I am having trouble extracting the data I need.
In SQL Server management studio, I can see the linked server...I can browse the different databases on the server. I can see user and system tables in all of the databases.
When I try and query a linked table (select * from server.db.table) I get Invalid object name 'servername.databasename.tablename'.
When I try script the table.. right_click on the linked table, Script table as, Select to, New Query Editor window, I get an error '[servername].[databasename]..[tablename] contains no columns that can be selected or the current user does not have permissions on that object.'
This leads me to believe that it is a permissions problem, but if I have access to the MySQL database using MySQL and the same login/password) and can retrieve the data there, then I think my login credentials should be enough using MS SQL. I guess I think its odd that I could have enough credentials to get in and see table names, but not do a select against it.
From my query I am getting results like below in one of the column:
'immediate due 14,289.00
04/15/15 5,213.00
05/15/15 5,213.00
06/15/15 5,213.00
07/15/15 5,213.00
08/15/15 5,213.00
09/15/15 5,213.00
10/15/15 5,213.00
11/15/15 5,210.00'
this same type of many rows are there (i just mentioned one) but having same pattern with tabs as delimiter in between dates and amount.
I need something that shows Date on one side representing particular amount on the other
For Immediate Due it will be current date and the amount besides it.
how can I achieve this.
Dear all,
I am doing a project where I heed to extract data from a table in a sql server and then automatically create a bar chart with this data preferrably in PowerPoint (or excel). I was thinking myself that it may be done in vba/macro added to a button in powerpoint. If anyone knows how to do this i would be very grateful or if anyone know a useful website could they post it up.
Thanks for your help
Laura
I have an NotesSQLDriver installed on my Individual PC. I have ODBCS Setup that connects to the Notes server. I have setup a SSIS Pkg on my PC, to extract data from Notes and load it into SQL. However, it runs only when I RUN It on my PC.
I need to schedule this SSIS pkg to run daily ON THE SERVER.
However, It does not run when I Run it from the SERVER, Since the Notes Driver is not installed on the server. So If I need the SSIS pkg ro be scheduled to run daily on the server,
1. Is that all I need is to NotesSQL Driver installed on the SERVER and
2. Do you foresee any problems with running this SSIK pkg on the SERVER . IT IS A WINDOWS 2003 O/S and SQL SERVER 2005.
hi all,
i have a device file which i know for sure contains all the data for a database (not the log). is there any way to recover the data from this file?
thanx.
:-)
hemant
I want to extract a particular portion of primary key field data.For example- suppose there are fifty data in PK field starting from 1...50.Now I want only to extract data from 25 to 50.It is bcos I want to retrieve only the new data that is inserted after a specified time.For example-today there is data starting from 1 to 25 which I have retrieved and saved elsewhere.By tomorrow there will be new data starting from 26 to 50 or more.Now I just want to extract this additional data from the database so that I dont need to extract all data again.Could anybody pls tell me how to do this.How can I do it using common SQL bcos I have to make a program for it.
View 1 Replies View RelatedCheers
I would really apprecite if anyone could make a comment on this...
what i wanna know is....
there are two tables, called 'A' and 'B' with identical structures...
is it possible to Perform the following in a single SQL ....
* If A->Field1 = B->Field1 then A->Field2 + b->Field2
* Records of table 'A' which not in table 'B' and
* Records of table 'B' which not in table 'A'
Thanks
This is my sample table Data
table1
TagID|TagName
--------------
1|xyz
2|123abc
3|a3bc
4|arsdew
5|xyc324
..............
..............
TagID--Primary Key
table2
TopicID|Topic
----------------
1|jkkj
2|kjgg
3|jhkj
4|refc
5|huhf
8|fyhj
9|jjk
...............
.............
..........
TopicID---Primary Key
table3
DetID|TagID|TopicID
-----------------------
1|1|1
2|1|2
3|1|3
4|2|4
5|2|5
8|3|8
9|3|9
....................
...................
.................
DetID---Primary key
TagID and TopicID----Foreign key
i need Topic based on TagName.
This xyz(TagName) have a 3 Topic. i need the 3 Topic
Once i select 123abc(TagName) that particular Topic I need..
any Query in Single Line.......................
Hi,
View 8 Replies View RelatedI am new to SSIS and everything in it. I have been reading up on it but I am stumped. I need to do the following:
Automatically open a .csv file that will have a different name each day
Extract the data
Convert it to SQL format
Append it to it to an existing SQL table in my DB
Delete or move the .csv file to a different directory
Thanks for the guidance!
Matt
hi All,
I have a string varaible passed to the SP something like :
@var = 'v1#1@v2#1,2@v3#1,3,4,5'. Now i have to extract the data from this variable in such a way that :
select * from var_data shud return like this :
ID Role
v1 1
v2 1
v2 2
v3 1
v3 3
v3 4
v3 5
Plz guide me how to achieve this result from the variable.
Thanks in advance :-)
Guys.
I have some data like this one:
'UploadfilesCompanyIDProjectCodeFilesFile1.doc'
P.S: the values may vary each time.
I need to programmatically extract from that kind of string only file1.doc
Ho can I dynamically do it? any function? statement? etc? please help.
The idea is getting only the string after the last ""
Thanks
Fr
heyI have a problem string index;Command.CommandText = "Select * from employees where LastName = ' " Index " ' ";but the problem is iam not able to pass the index value properly like it should be ( ' Index ' ) for SqlServer2000.but its either giving me an error or its not taking the value properly.Can anyone help me out with that.Thanks
View 3 Replies View RelatedCan someone point me in the right direction. I would like to grab some data from an email (not as an attachment)and load into a table, but I have no idea where to begin. Also, can this data also be retreived from a website?
Thanks
BV
I recall something about Analysis Services (SQL server tool) that is able to extract data from the DB tables (select multiple tables if one wishes (and to link those tables up ??!?)) then extracted to MS Excel. It has been a while since the course was last taught, I'm not at all sure how the steps were, or how Excel were able to display them. Would someone advice or refer to a tutorial if possible?
Much thanks!
Hi,
I can't figure out how to extract just the date or just the time from a DATETIME data type? Any suggestions?
I have a table having multiple fields but I need to extract data based on the two fields.
Field1 Field2
1 | 123
1 | 213
2 | 123
2 | 3654
2 | 4758
I want the result with 2 cases
1.) distinct in Field 1 but multiple in field 2
Expected result:
Field1 column1 column2 column3
1 | 123 | 213
2 | 123 | 3654 | 4758
2.) multiple in field 1 but distinct in field 2
Expected Result :
Field 2 | Column1 | Column2
123 | 1 | 2
There may be more columns added according to the data available.
I have a description that is dynamically built for a part, with variables for this part split by line feeds. For example
100" widget
Color: White
Holes: Many
Material: Wood
This makes everything nice an neat on reports, etc, and the world is good. There are a lot of better ways to do this I am sure, but due to the limitations of the software we are using, this fits the bill best.
In SQL view, it LOOKS like the lines are all run together, but when you actually pull the data, it formats properly.
Enter a new need to identify just the first "line" of info. I would like to be able to query all characters left of the CHAR(10). In the example above, the results would be just 100" Widget. I have tried a couple ways using Left(field,charindex(char(10))-1 but nothing seems to get me data back. Is this even possible within a View?
I have an Excel 97 file that has a lot of data in it and I need to pull out pieces of that data. Here is one example of the data I have. It is in colum C in Excel.
Row Column C
1 11/25/07
2 12/01/07
3 week 1
4
5
6 9,708
7 128,353
8 -
9
10 42,691
11 3,000
12 183,751
13 $183,751
What I want to get out of this to put into a SQL table in one record is (I've included a header row here):
StartDate EndDate Week Value
11/22/07 12/1/07 1 183751
What is the best way to attach this? I have several other items I need to pull out of this Excel File, but if I can get this figured out I can adapt it to get the rest of what I want.
hello
hope someone can help with this problem. I've created a package which copies data from an oracle 10g database into excel. the package works fine when executed in BIDS, at the command line or using dtexec but fails whenever i try and schedule it as a sql agent job. The package was created as the same user that sql agent runs as. I'm getting the following error message....
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for Oracle" Hresult: 0x80004005 Description: "Oracle client and networking components were not found. These components are supplied by Oracle Corporation and are part of the Oracle Version 7.3.3 or later client software installation. Provider is unable to function until these components are installed.". End Error Error: 2008-02-15 14:28:03.85 Code: 0xC020801C Source: Data Flow Task OLE DB Source [1] Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "OPRD.epsenq" failed with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. The package execution fa... The step failed.
does oracle client tools need to be installed in a certain locaion? the server is 32 bit.
thanks
iain
I am using data flow task.And data flow source uses ole db for olap 9.0 to connect my ssas. sql comment is my access mode. A mdx query extracts data. Data flow destination is sql server table. Error said Data Flow Task: OLE DB Source [579]: The output "OLE DB Source Output" (589) references an external data type that cannot be mapped to a Data Flow task data type. I guess it is a implicit data type convertion problem. But how to solve it???
I appreciate for all suggestion. Thanks.