Extracting XML From An SLQ Table Column Then Getting Delimted Vales From Within That XML...
Dec 6, 2007
Hi all.
This is my first SSIS project it's also an utter mare.
I'm a C# developer with reasonable SQL knowledge but I haven't used SSIS projects in BIS before.
What we have (for some insane reason) is an SQL table like so:
Column A |Column B |Column X |
Where Column X contains XML like this:
<Column C></Column C><Column D></Column D><Column ArrgWTF></Column ArrgWTF>
Where <Column ArrgWTF> contains two '-' delimited values.
What I need is some guidence (or just being told if its possible or not) to take this data and arange it like so (see bellow) in a new SQL table:
Column A |Column B |Column C | Column D |Column ArrgWTF1 |Column ArrgWTF2 |
Where A&D are from the original SQL table, C & D are pulled from the XML and ArrgWTF1 & 2 are sourced from the '-' delimited vales within the XML.
Many, many, thanks in advance.
View 6 Replies
ADVERTISEMENT
Dec 1, 1999
I have a string of comma delimited values such as the following:
1,2,3,4,5
I have a table with ONE column only. How can I do an insert statement which will insert each of these values?
If I type the following:
"INSERT INTO tabletest SELECT 1,2,3,4,5"
I get this error:
"Insert error: column name or number of supplied values does not match table definition. "
This makes sense because I do not have 5 columns I only have 1. But how can I get around this?
Any help is most appreciated! Thanks in advance...mary
View 1 Replies
View Related
Feb 5, 2006
I am using the following to extract the column names of a table. I would like to do this for the whole database. Currently I am cutting the results into an excel spread. Is there a better way of doing this? Here is the query
SELECT name
FROM syscolumns
WHERE [id] = OBJECT_ID('tablename')
View 4 Replies
View Related
Dec 4, 2014
I am trying to extract what I believe is called a Node from a column in a table that contains XML. What's the best way to do this? It is pretty straightforward since I'm not even looking to include a WHERE clause.
What I have so far is:
SELECT CCH.OrderID, CCH.CCXML.query('/cc/auth')
FROM tblCCH AS CCH
View 3 Replies
View Related
Jul 20, 2015
I'm trying extract a column from the table based on certain Conditions: This is for PowerPivot.
Here is the scenario:
I have a table "tb1" with (project_id, month_end_date, monthly_proj_cost ) and table "tb2" with (project_id, key_member_type, key_member, start_dt_active, end_dt_active).
I would like to extract Key_member where key_member_type="PM" and active as of tb1(month_end_date).
Is this possible using DAX ?
View 6 Replies
View Related
Apr 16, 2004
Hard to write a subject line to describe this one.
Anayway, I have a table with names and address plus an extra field noting a part number of product.
I'd like to build a SELECT string that will return one result for each name/address (uniques only in other words) and build a comma delimited field of all the part numbers for that name/address.
Example:
NAME ADDRESS PART NUMBER
John Smith 555 Main st., los angeles, ca 90003 5000
John Smith 555 Main st., los angeles, ca 90003 6650
Mike Jones 8569 West 18th Ave., San Diego, ca 1255
John Smith 555 Main st., los angeles, ca 90003 5144
Mike Jones 8569 West 18th Ave., San Diego, ca 2399
So I'd like my results to look like this:
NAME ADDRESS PARTS
John Smith 555 Main st., los angeles, ca 90003 5000,6650,5144
Mike Jones 8569 West 18th Ave., San Diego, ca 1255,2399
THanks in advance for any suggestions!
Raul
View 2 Replies
View Related
Jan 26, 2007
Hi
I have a Matrix Like This
Sales Type AZ CA ID NV WA OR Total
No Surplus 1 2 1 3 4 1 12
Reverted 1 4 2 4 7 2 20
Surplus 2 4 1 2 2 1 12
This "Total" is of All States(AZ, CA, ID, NV, WA, OR). But I Just want the total of
just four states i.e(ID, NV, WA, OR). And I also Want that States which are not included in the total i.e(AZ, CA) Should also appears in the matrix , but their values should not include in the total.
I have already applied the filter on the subtotal, but (AZ, CA) did'nt appears in the matixr after filter.
thanks
Regard
Mohammad Yaseen
View 10 Replies
View Related
Nov 17, 2007
Hi,
I have 2 tables,
MembersTemp and Organisations
I'm trying to extract the organisation Name from the organisations table but am unsure of the sql statement to do this.
Initiallt I only have the ExecID for the MembersTemp table
MembersType table:
ExecID 3013
OrganisationID 4550
Organisation table:
ID 4550 (PK)
Name "Microboff"
Any ideas??
View 5 Replies
View Related
Apr 28, 2004
have a field in a table that has combined lastname,firstname and middle name like
combs,albert mike
woods-athere,jane alice
The last and first name are separated by a comma, and the middle name by a space
I need in tsql to split them to last name,first name and middle name
I used below
select substring (longname, 1, patindex( '%,%' , longname) -1 ) 'firstname',
substring (longname, patindex( '%,%', longname) + 1, len(longname)) 'lastname',
substring (longname, patindex( '% %', longname) + 1, len(longname)) 'middlename'
FROM Demographic_staging
I get the names all split, but I get the middle name with the first name. How can I limit the first name to recoginze the comma, but stop at the space
View 3 Replies
View Related
Jun 30, 2015
We have several hundred very simple ETL SSIS 2K8 package files (*.dtsx).
I'd like to be able to interrogate them to determine source and destination fields.
There's no great need to map source to dest or to extract data types.
So far, the most promising candidate is to load them using OPENROWSET into an XML field in a SS table.No problem there, but querying using OPENXML has me stumped.
The package files will change a couple of times per year, so the process needs to be repeatable with minimal manual intervention.
View 3 Replies
View Related
Sep 15, 2006
I am a new user to SQL an I need to create a data base record from a comma delimted file (.CVS). The CVS file has up to ten fields all alpha/numeric. I must create this data base file using a stored procedure! The data base records will be displayed on a grid screen but this grid view will not be used to update the original CVS file.
View 6 Replies
View Related
Mar 22, 2007
This is my sample table Data
table1
TagID|TagName
--------------
1|xyz
2|123abc
3|a3bc
4|arsdew
5|xyc324
..............
..............
TagID--Primary Key
table2
TopicID|Topic
----------------
1|jkkj
2|kjgg
3|jhkj
4|refc
5|huhf
8|fyhj
9|jjk
...............
.............
..........
TopicID---Primary Key
table3
DetID|TagID|TopicID
-----------------------
1|1|1
2|1|2
3|1|3
4|2|4
5|2|5
8|3|8
9|3|9
....................
...................
.................
DetID---Primary key
TagID and TopicID----Foreign key
i need Topic based on TagName.
This xyz(TagName) have a 3 Topic. i need the 3 Topic
Once i select 123abc(TagName) that particular Topic I need..
any Query in Single Line.......................
View 2 Replies
View Related
Oct 13, 2007
Hi, im currently learning sql. I have a problem extracting a date from a table.
SELECT Date FROM Flight
Gives me a "syntax error in sql expression"
in the table the date coloum - fields are set Date/Time
an example field is 28.12.2007 00:00
Thanks in advanced!
Steve
p.s. im using openoffice base, if i force to run the code it display's the date. however I would like it to run without errors. Thanks again
View 4 Replies
View Related
Feb 22, 2008
Hi,
I have two tables - a stock table and a transaction table. The stock table is called stock and the transaction table is called trans. The table make a point of sale database. Both table have a joining field called prod_no.
I want to extract the stock line by querying stock.prod_no that are not present in the trans table for a period of time specified.
Basically, I want to find dead stock lines that have not been sold and, therefore, are not in the transaction table but that have a stock figure. I have to enter in a start and end date paramater using the ddate field in the trans table. I have looked at left, right and outer joins but with no luck and don't even know if this is the correct query type to use.
any help would be much appreciated,
View 4 Replies
View Related
Dec 4, 2007
I want to see all the product line provided they are there in the table or not,
i.e.
Product Line
Product Line Description
Total Usage Quantity
10000
Raw Material
0
20000
Intermediate Product
0
30000
Bearing
2713321
32000
High Strength
4258197
34000
High Temp
0
36000
Corrosion Resistant
639492
50000
High Speed
1452153
52000
Die Steel Hot Work
1614727
54000
Die Steel Cold Work
464943
88000
Misc
0
90000
Conversion
0
This is the result i am looking out for now the problem is that those record are not there in table so naturally they will not be shown in the result.
Can any one help me modifying below query? so that i can get the aforesaid result
Code Block
SELECT [PRODL] as 'Product Line'
, (case when prodl = 10000
then 'Raw Material'
when prodl = 20000
then 'Intermediate Product'
when prodl = 30000
then 'Bearing'
when prodl = 32000
then 'High Strength'
when prodl = 34000
then 'High Temp'
when prodl = 36000
then 'Corrosion Resistant'
when prodl = 50000
then 'High Speed'
when prodl = 52000
then 'Die Steel Hot Work'
when prodl = 54000
then 'Die Steel Cold Work'
when prodl = 88000
then 'Misc'
when prodl = 90000
then 'Conversion'
end)
as 'Product Line Description'
,sum(case
when [PRODL] = 10000
then [Usage Qty]
when [PRODL] = 20000
then [Usage Qty]
when [PRODL] = 30000
then [Usage Qty]
when [PRODL] = 32000
then [Usage Qty]
when [PRODL] = 34000
then [Usage Qty]
when [PRODL] = 36000
then [Usage Qty]
when [PRODL] = 50000
then [Usage Qty]
when [PRODL] = 52000
then [Usage Qty]
when [PRODL] = 54000
then [Usage Qty]
when [PRODL] = 88000
then [Usage Qty]
when [PRODL] = 90000
then [Usage Qty]
end)
as 'Total Usage Quantity'
FROM [LATCUBDAT].[dbo].[RMU]
group by prodl
order by prodl
Result of The Aforesaid Query
Product Line
Product Line Description
Total Usage Quantity
30000
Bearing
2713321
32000
High Strength
4258197
36000
Corrosion Resistant
639492
50000
High Speed
1452153
52000
Die Steel Hot Work
1614727
54000
Die Steel Cold Work
464943
View 5 Replies
View Related
Sep 21, 2007
I need some help with the following...
My data source has some columns I have to 'translate' first and then insert into my destination table.
Example Source data:
key size height
1 'Small' 'Tall'
2 'Big' 'Short'
has to become
1 'Y' 'P'
2 'N' 'D'
I thought of creating a lookup table (I'm talking about the real table, not a lookup transformation table) that would have these columns: column name, value_source, value_dest
Example:
col_name vl_source vl_dest
size 'Small' 'Y'
size 'Big' 'N'
height 'Tall' 'P'
... and so on, I believe you get the point
How would you extract the needed values? Can I use a select statement in a derived column expression? Any ideas? I'm not really fond of the idea to create n lookups, one for each column I have to translate, is there a slicker solution?
View 10 Replies
View Related
Jun 3, 2008
Hello. I have a somwhat simple question.
I have a table inside my database where i have some columns. Id like to extract distinct values from one column and inser them into another. My table is named article and id like to slect all the destinct values from the column naned type inside my article table. Then i need to insert my values into a new table called type but i would also like the to have 2 columns inside my type table. 1 called counter witch is an auto increment PK, and another one named type where the results from my query would be inserted.
Iv tried a veriety of querys but none of them have managed to do this.
Could anyone help me construct this query?
View 2 Replies
View Related
Sep 22, 1999
Hello,
I have been placed in the position of administering our SQL server 6.5 (Microsoft). Being new to SQL and having some knowledge of databases (used to use Foxpro 2.6 for...DOS!) I am faced with an ever increasing table of incoming call information from our Ascend MAX RAS equipment. This table increases by 900,000 records a month. The previous administrator (no longer available) was using a Visual Foxpro 5 application to archive and remove the data older than 60 days. Unfortunately he left and took with him Visual Fox and all of his project files.
My question is this: Is there an easy way to archive then remove the data older than 60 days from the table? I would like to archive it to a tape drive. We need to maintain this archive for the purposes of searching back through customer calls for IP addresses on certain dates and times. We are an ISP, and occasionally need to give this information to law enforcement agencies. So we cannot just delete it.
Sorry this is so long...
Thanks,
Brian R
WESNet Systems, NOC
View 1 Replies
View Related
Dec 1, 2005
Hello,I am currently working on a monthly load process with a datamart. Ioriginally designed the tables in a normalized fashion with the ideathat I would denormalize as needed once I got an idea of what theperformance was like. There were some performance problems, so thedecision was made to denormalize. Now the users are happy with thequery performance, but loading the tables is much more difficult.Specifically...There were two main tables, a header table and a line item table. Thesehave been combined into one table. For my loads I still receive them asseparate files though. The problem is that I might receive a line itemfor a header that began two months ago. When this happens I don't get aheader record in the current month's file - I just get the record inthe line items file. So now I have to join the header and line itemtables in my staging database to get the denormalized rows, but I alsomay have to get header information from my main denormalized table(~150 million rows). For simplicity I will only include the primarykeys and one other column to represent the rest of the row below. Thetables are actually very wide.Staging database:CREATE TABLE dbo.Claims (CLM_ID BIGINT NOT NULL,CLM_DATA VARCHAR(100) NULL )CREATE TABLE dbo.Claim_Lines (CLM_ID BIGINT NOT NULL,LN_NO SMALLINT NOT NULL,CLM_LN_DATA VARCHAR(100) NULL )Target database:CREATE TABLE dbo.Target (CLM_ID BIGINT NOT NULL,LN_NO SMALLINT NOT NULL,CLM_DATA VARCHAR(100) NULL,CLM_LN_DATA VARCHAR(100) NULL )I can either pull back all of the necessary header rows from the targettable to the claims table and then do one insert using a join betweenclaims and claim lines into the target table OR I can do one insertwith a join between claims and claim lines and then a second insertwith a join between claim lines and target for those lines that weren'talready added.Some things that I've tried:INSERT INTO Staging.dbo.Claims (CLM_ID, CLM_DATA)SELECT DISTINCT T.CLM_ID, T.CLM_DATAFROM Staging.dbo.Claim_Lines CLLEFT OUTER JOIN Staging.dbo.Claims C ON C.CLM_ID = CL.CLM_IDINNER JOIN Target.dbo.Target T ON T.CLM_ID = CL.CLM_IDWHERE C.CLM_ID IS NULLINSERT INTO Staging.dbo.Claims (CLM_ID, CLM_DATA)SELECT T.CLM_ID, T.CLM_DATAFROM Staging.dbo.Claim_Lines CLLEFT OUTER JOIN Staging.dbo.Claims C ON C.CLM_ID = CL.CLM_IDINNER JOIN Target.dbo.Target T ON T.CLM_ID = CL.CLM_IDWHERE C.CLM_ID IS NULLGROUP BY T.CLM_ID, T.CLM_DATAINSERT INTO Staging.dbo.Claims (CLM_ID, CLM_DATA)SELECT DISTINCT T.CLM_ID, T.CLM_DATAFROM Target.dbo.Target TINNER JOIN (SELECT CL.CLM_IDFROM Staging.dbo.Claim_Lines CLLEFT OUTER JOIN Staging.dbo.Claims C ON C.CLM_ID =CL.CLM_IDWHERE C.CLM_ID IS NULL) SQ ON SQ.CLM_ID = T.CLM_IDI've also used EXISTS and IN in various queries. No matter which methodI use, the query plans tend to want to do a clustered index scan on thetarget table (actually a partitioned view partitioned by year). Thenumber of headers that were in the target but not the header file thismonth was about 42K out of 1M.So.... any other ideas on how I can set up a query to get the distinctheaders from the denormalized table? Right now I'm considering usingworktables if I can't figure anything else out, but I don't know ifthat will really help me much either.I'm not looking for a definitive answer here, just some ideas that Ican try.Thanks,-Tom.
View 2 Replies
View Related
Jun 11, 2006
hi all,
I need to select the no of records on the basis of specified range of records.
In oracle i found rownum, i could not find it in sqlserver. how the data are extracted from the huge records..
I have used temporary table,map the table primary key to the next table with identity
but i dont find it good. I need to ignore the insert the data in next table or craeting new table having the rowid ...
Is there some other best way to extract the specified data
here is the type of query.
select * from customers where rownum between 1000 and 10000
this is in oracle
i am in need to do this in the sql server
waiting for the response...............................
View 5 Replies
View Related
Jan 15, 2007
Hello,I'm creating an audit table and associated triggers to be able to captureany updates and deletes from various tables in the database. I know how tocapture the records that have been updated or deleted, but is there any waythat I can cycle through a changed record, look at the old vs new values andcapture only the values that have changed?To give you a better idea of what I'm trying to do, instead of creating acopy of the original table (some tables have many fields) and creating awhole record if a type or bit field has been changed, I'd like to onlycapture the change in a single audit table that will have the followingfields;AuditID int INDENTITY(1,1)TableName varchar(100)FieldName varchar(100)OldValue varchar(255)NewValue varchar(255)AuditDate datetime DEFAULT(GetDate())Any direction would be greatly appreciated.Thanks!Rick
View 6 Replies
View Related
Nov 20, 2015
I want to calculate the target based on Flag value if Flag value is "Y" ....than MAX(Customer Target) else MAX(SLA target).Flag column contains "Y" , "N" and some blank values . Flag, Customer Target and SLA target are the columns in Table1. I have used the below formulas
Target:=IF('Table1'[ Flag]= "Y",MAX('Table1'[Customer Target]),MAX('Table1'[SLA Target]))
Target:=IFERROR(IF('Table1'[Flag]= "Y",MAX('Table1'[Customer Target]),MAX('KPI'[SLA Target])),BLANK())
View 7 Replies
View Related
Jun 29, 2012
I wanted to know that when I create a table using SQL Server, does the table metadata like schemaname and catalogname is stored in memory or in hard-disc. I am trying to extract schemaname and catalogname when the database is down or correctly when I have no connection string. I know about sysindexes, systables etc, but i am not able to understand whether it stores the data which is useful to me like catalogname.
sql query to extract the column names from sysindexes?
View 2 Replies
View Related
Sep 27, 2006
For example,I have a table "authors" with a column "author_name",and it has three value "Anne Ringer,Ann Dull,Johnson White".Here I want to create a new table by using a select sentence,its columns come from the values of the column "author_name".
can you tell me how can I complete this with the SQL?
View 2 Replies
View Related
Sep 15, 2006
Hi all, I am not over familiar with SQL, I am a VB programmer, simply I need to achieve the following within Enterprise Manager.
I have 2 tables, different designs, different number of rows, I simply need to check whether the contents of a column in the first table is in a column in the second table, just simply a table/column to table/column data check for the same data content.
Easy Peasy for you guys, any help would be appreciated.
View 6 Replies
View Related
Jun 18, 2007
Hi, all experts here,
Thanks for your kind attention.
I want to use time series algorithm to mine data from my case table and nested table. Case table is Date table, while nested table is the fact table. E.g, I want to predict the monthly sales amount for different region (I have region table related to the fact table), how can I achieve this?
Thanks a lot and I hope it is clear for your help and I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 6 Replies
View Related
Jun 4, 2007
Hi, all experts here,
Thank you very much for your kind attention.
I am confused on key column of case table and key time column of nested table by using Time Series algorithm.
In my case, the case table structure is as below:
Territory key text (the ID is actually dimrisk_key, in this case, I use the name column binding to combine the Territory column of case table Dimrisks),
While the nested table structure is as below:
Cal_month key time (in this case, actually the ID is dimdate_key, again, I used name column bining property to bind the Cal_month to the ID)
So my question is, as the key column of case table has been set to be Territory, as a result, does the model training still cover all the cases (rows) based on the ID of the table?
Also, in the nested table, as the key time column has been set to Cal_month rather than Dimdate_key of the nested table, as a result, would the single series based on the cal_month?
Hope it is clear for your advices and help.
And I am looking forward to hearing from you shortly.
With best regards,
Yours sincerely,
View 1 Replies
View Related
Sep 7, 2007
Hi guys,
If I have a temporary table called #CTE
With the columns
[Account]
[Name]
[RowID Table Level]
[RowID Data Level]
and I need to change the column type for the columns:
[RowID Table Level]
[RowID Data Level]
to integer, and set the column [RowID Table Level] as Identity (index) starting from 1, incrementing 1 each time.
What will be the right syntax using SQL SERVER 2000?
I am trying to solve the question in the link below:
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2093921&SiteID=1
Thanks in advance,
Aldo.
I have tried the code below, but getting syntax error...
ALTER TABLE #CTE
ALTER COLUMN
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
I have also tried:
ALTER TABLE #CTE
MODIFY
[RowID Table Level] INT IDENTITY(1,1),
[RowID Data Level] INT;
View 18 Replies
View Related
Mar 7, 2008
Hi I’m trying to alter a table and delete a column I get the following error. The object 'DF__Morningst__LastU__19EB91BA' is dependent on column 'LastUpdated'.
ALTER TABLE DROP COLUMN LastUpdated failed because one or more objects access this column. I tried deleting the concerned constraint. But the next time I get the same error with a different constraint name. I want to find out if I can dynamically check the constraint name and delete it and then drop the column. Can anyone help.IF EXISTS(SELECT 1FROM sysobjects,syscolumnsWHERE sysobjects.id = syscolumns.idAND sysobjects.name = TablenameAND syscolumns.name = column name)BEGIN EXECUTE ('ALTER TABLE tablename DROP CONSTRAINT DF__SecurityM__DsegL__08C105B8')EXECUTE ('ALTER TABLE tablenameDrop column columnname)ENDGO
View 1 Replies
View Related
Nov 12, 2012
I am trying to exclude records from a table where the ID column is the same but the Mail code Column is multi-valued.For Example: (the table looks like....)
ID Mail_code
111111 XNT
111111 N11
111111 XNC
222222 XNC
222222 XNL
333333 XNC
So, if there is any ID that has a value of XNC, I want to exclude the ID all together from my output regardless of the other values.
View 3 Replies
View Related
May 26, 2014
I got a sales cost and cost amount table for my budget. the sales cost table is getting updated with FOBB items which makes the total incorrect . the FOBB values needs to be moved from the sales cost column to the cost amount column. how can i do it with an SQL script.
View 1 Replies
View Related
May 3, 2007
I receive this message when I try to run any report. The reportserver and reportservertempdb databases were upgraded using backup/restore from SQL2000 to SQL2005 on a separate server which is running RS2005 . Please help. Thanks
View 1 Replies
View Related
Oct 14, 2015
I have the following table
Table Name EmployeeInformation
EmployeeID EmployeeFirstName EmployeeLastName
1 |John |Baker
2 |Carl |Lennon
3 |Marion |Herbert
Table Name PeriodInformation
PeriodID PeriodStart PeriodEnd
1 |1/1/14 |12/30/14
2 |1/1/15 |12/30/15
[code]...
I want a query to join all this tables based on EmployeeID, PeriodID and LeaveTypeID sum of LeaveEntitlement.LeaveEntitlementDaysNumber based on LeaveTypeID AS EntitleAnnaul and AS EntitleSick and sum AssignedLeave.AssignedLeaveDaysNumber based on LeaveTypeID AS AssignedAnnaul and AS AssignedSick and subtract EntitleAnnaul from AssignedAnnual based on LeaveTypeID AS AnnualBalance and subtract EntitleSick from AssignedSick based on LeaveTypeID AS SickBalance
and the table should be shown as below after executing the query
EmployeeID, EmployeeFirstName, EmployeeLastName, PeriodID, PeriodStart, PeriodEnd, EntitleAnnual, AssignedAnnual, AnnualBalance, EntitleSick, AssignedSick, SickBalance
View 4 Replies
View Related
