FILTER For MDX Query
Feb 17, 2012
I've got an MDX query I need to modify, but not quite sure how to proceed. I essentially know most of tye syntax, but am at a loss as to where the components of the syntax should appear in the query. Here is the original query:
Code:
WITH
MEMBER [Employee].[FTE vs FL].[CF Total] AS AGGREGATE([Client Facing Disciplines])
MEMBER [Time].[Year - Half Year - Quarter - Month - Date].[Trailing 12 Months] AS AGGREGATE(LASTPERIODS(60, STRTOMEMBER(@SelectedMonthEx, CONSTRAINED)))
MEMBER [Time].[Year - Half Year - Quarter - Month - Date].[YTD] AS AGGREGATE(YTD(STRTOMEMBER(@SelectedMonthEx, CONSTRAINED)))
[Code] ....
This is how I'm sure the two lines that say what should be excluded, I'm just not sure where they should go. I believe a FILTER statement is what I need, but not sure how to format it.
[Employee].[FTE vs FL].[Discipline].&[LOYALTY],
[Employee].[FTE vs FL].[Discipline].[Department].&[OLSON PR Chicago]
MDX is definitely not my strong point.
View 4 Replies
ADVERTISEMENT
May 3, 2006
I'm an MDX newbie.. with some help I was able to create a query that returns accurate results. All I need to do now is filter for Completed Work value of greater than 0.
I have tried to use the filter wizard in VS2005, but I have never gotten the desired results.
Platform Info:
SQL Server 2005 Standard
VS2005
---------Start Statement----------------------------------------------------------
WITH
MEMBER [Measures].[Completed Work by WI on dt1] AS
(
[Assigned To].[Person].CurrentMember,
[Work Item].[System_Id].CurrentMember,
[Date].[Year Week Date].[Date].&[2006-04-23T00:00:00],
[Measures].[Microsoft_VSTS_Scheduling_CompletedWork]
)
MEMBER [Measures].[Completed Work by WI on dt2] AS
(
[Assigned To].[Person].CurrentMember,
[Work Item].[System_Id].CurrentMember,
[Date].[Year Week Date].[Date].&[2006-04-29T00:00:00],
[Measures].[Microsoft_VSTS_Scheduling_CompletedWork]
)
MEMBER [Measures].[Completed Work] AS
[Measures].[Completed Work by WI on dt2] - [Measures].[Completed Work by WI on dt1]
SELECT
NON empty
{
[Measures].[Completed Work]
}
ON COLUMNS,
NON EMPTY
{
([Assigned To].[Person].[Person],[Work Item].[System_Id].[System_Id],[Work Item].[System_Title].[System_Title])
}
ON ROWS
FROM
[Team System]
----------End Statement---------------------------------------------------
View 1 Replies
View Related
Dec 20, 2007
Hello ,
I am Joining two tables and trying to filter the data based on some conditions.
SELECT SERVICE_TICKET.SERVICE_TICKET_CODE,BuildingAddress.BuildingAddress, BuildingAddress.UserID,SERVICE_TICKET.PROBLEM_REPORTED, SERVICE_TICKET.CONTACT_PERSON, SERVICE_TICKET.STATUS FROM BuildingAddress INNER JOIN SERVICE_TICKET ON BuildingAddress.Customer_Site_Int_ID = SERVICE_TICKET.CUST_SITE_INT_ID WHERE (JoinTable.UserID = @parameter) AND (SERVICE_TICKET.SERVICE_TICKET_CODE LIKE 'HD' + '%')
See in the query at the WHERE clause I am using JoinTable.UserID column actually I know that it is wrong . Could some one tell me how the query should be so that I can get the records from the join which matches the UserID column to a parameter.
Hope that my question is clear.
Thanks
View 4 Replies
View Related
Feb 29, 2008
All,
So I have this query that is ignoring my date filter and for the life of me I can't figure out why. Was hoping some guru could explain it to me. Here goes:
This query ignores my date filter:
SELECT
rcv.Name AS MachineName,
r.JobId,
j.Name AS JobName,
r.CreateTime AS JCreateTime,
rsv.Name AS JResultStatus,
rpv.Path + rpv.Name AS ResourcePool,
rcvv.ResourceConfigurationVal AS Dimension
FROM
dbo.Result_View AS r
INNER JOIN dbo.ResourceConfiguration_View AS rcv ON r.ResourceConfigurationId = rcv.Id
INNER JOIN dbo.Job_View AS j ON r.JobId = j.Id
INNER JOIN dbo.ResultStatus_View AS rsv ON r.ResultStatusId = rsv.Id
INNER JOIN dbo.Resource_View AS rv ON rcv.ResourceId = rv.Id
INNER JOIN dbo.ResourcePool_View AS rpv ON rv.ResourcePoolId = rpv.Id
RIGHT JOIN dbo.ResourceConfigurationValue_View AS rcvv ON rv.LatestResourceConfigurationId = rcvv.ResourceConfigurationId
LEFT JOIN dbo.Dimension_View AS d ON rcvv.DimensionId = d.Id
WHERE
(r.CreateTime > DATEADD(DAY, -15, GETDATE()))
AND
(rcv.Name LIKE 'PNP%')
AND
(d.Id = 859)
OR
(d.Id = 860)
If I comment out the last two joins and associated select/filters, all of the sudden the date filter works again. From everything I have read, the joins are supposed to be processed BEFORE the filters are applied in the virtual table. My DB goes back a number of years and contains millions of records. W/O the date filter, the query takes a very, very long time to run.
Any ideas on why this would happen?
Thanks,
Allen
View 5 Replies
View Related
Nov 22, 2007
Hi,
I have an interface that allows the user to filter the data to be returned.
e.g. if the user selects @SeniorManager then the query should return all data related to this.
So if the user selects @SeniorManager and @Auditor then the query should return all data matching both @SeniorManager AND @Auditor.
FundID and ClientID are the ID's that link each table.
Am I correct in using UNION ALL below?? thanks.
Code Block
SELECT SeniorMgr, null AS Auditor, null AS Legal
FROM FundClient f
INNER JOIN FundPortfolio p
ON p.ClientID = f.ClientID
INNER JOIN Staff s
ON (s.ClientID = p.ClientID) AND (s.FundID = p.PortfolioID) AND (s.ClientID = f.ClientID)
WHERE s.ClientID = @ClientID AND s.FundID = @FundID
AND (@SeniorManager = null Or SeniorMgr = @SeniorManager)
UNION ALL
SELECT null AS SeniorMgr, fa.Auditor, null AS Legal
FROM FundClient f
INNER JOIN FundPortfolio p
ON p.ClientID = f.ClientID
INNER JOIN (Auditor a
INNER JOIN FundAuditor fa
ON fa.AuditorID = a.Auditor)
ON (a.ClientID = p.ClientID) AND (a.FundID = p.PortfolioID) AND (a.ClientID = f.ClientID)
WHERE a.Auditor = @Auditor
AND a.ClientID = @ClientID AND a.FundID = @FundID
UNION ALL
SELECT null AS SeniorMgr, null AS Auditor, fl.Legal
FROM FundClient f
INNER JOIN FundPortfolio p
ON p.ClientID = f.ClientID
INNER JOIN (Legal l
INNER JOIN LegalCounsel fl
ON fl.LegalID = l.Legal)
ON (l.ClientID = p.ClientID) AND (l.FundID = p.PortfolioID) AND (l.ClientID = f.ClientID)
WHERE l.LegalC = @Legal
AND l.ClientID = @ClientID AND l.FundID = @FundID
View 8 Replies
View Related
Nov 1, 2006
Hello All, Can someone please help me with this problem. I have created additional profile properties for my users in the aspnet_profile table. One of the properties is named 'Division'. The division property is how I segregate users, for example, my company has multiple divisions and, the information that is displayed is dynamic according to which divison the user belongs to. Amost all of my stored proceedures are filtered by checking the value of Profile.Division of the logged in user. This system works great. The problem is, now I am working on user management and I need to create a Gridview that will display all of the users for a particular division but, I have no idea how to filter a query against the aspnet database to get the results I am looking for. Here is a small example:SELECT aspnet_Users.UserName, aspnet_Profile.PropertyNames, aspnet_Profile.PropertyValuesStringFROM aspnet_Profile INNER JOIN aspnet_Users ON aspnet_Profile.UserId = aspnet_Users.UserId******** Here is the part I need help with *********************WHERE PROFILE.DIVISION = KOr, can it even be done? Can you filter a query on the value of a profile property?Anyone have any ideas?Thanks in adavance for your help
View 2 Replies
View Related
Jul 2, 2007
Generally, on any screen, we design filter screen by allowing user to identify range or one value to search.
But sometime in some screen, It will be more convenient for user if user can identify No matter how value to search.
For example
On screen which have information of people in any province.
So user would like to search it by identify no matter how value to search.
There are check box of any province on filter part which enable users choose it.
Hence, if sometime user choose (by clicking on checkbox) 3 provinces : LA, Michigan, WachingtonDC to see description only 3 chosen province.
and sometime user choose (by clicking on checkbox) 2 provinces : LA, Michigan to see description only 2 chosen provinces.
Please give me any idea for create Stored Procedure or any tecnique to complete my idea....
Help me Pleaseeeee
View 1 Replies
View Related
Nov 14, 2007
We are working on an application which aggregates news articles from various sources. The problem is, when querying the database, is that there are a lot of double results because some of the sources get their news from the same press agency. To clarify things a bit here's a link to an example:
http://84.244.146.27/Zoekresultaten.aspx?SearchQuery=Amsterdam
As you can see, there are a lot of the same results. What we want is to filter out the double results irrespective of the source. In other words; when the query encounters the first result, display that and leave out the other same results.
I've tried filtering them out by using DISTINCT on the 'news header' / results, but that does not seem to work. Any ideas on how to get this done?
Any help is greatly appreciated!
View 5 Replies
View Related
May 27, 2008
Hi everybody have this query that list all the duplicate records meaning the occurence of pubinfid in more than one row. This gets me fine. Iwant thought to insert a where clause that further filters the result where pubid between 30 and 33. I tried placing it after the FROM CLAUSE BUT DOESN'T GIVE me what I want it still includes records other than the between clause. Also I tried placing it after the HAVING clause but it includes records which has only one count.. Where could I place the where clause or is ther an alternative for this.
SELECT a.pubinfid, a.pubid, a.pubcount
FROM pubssubscribe AS a INNER JOIN
(SELECT pubinfid
FROM pubssubscribe
GROUP BY pubinfid
HAVING (COUNT(*) > 1)) AS b ON a.pubinfid = b.pubinfid
thanks
View 8 Replies
View Related
Dec 4, 2011
I have alphanumeric data in a Table Assets. The column name is Milepost.
Column Values are like below
MilePost
1.24
1.61
4.56
4.78
5.45
6.91
7.19
[code]....
Now I want to select records between 1 to LR 4.41 which should return all records between 1 to LR 4.41
My below query is not returning proper values. So i need a correct sql query.
Select Milepost from Assets where Milepost between '1' and 'LR 4.41'
View 4 Replies
View Related
Apr 23, 2015
I need to find a 12-digit number in a column called "SequenceNumTxt", in a VERY long table.I can query the first n lines but need to add something like "WHERE [SequenceNumTxt]="123412341234".The above does not work, gives me a syntax error; what am I doing wrong?
View 7 Replies
View Related
Apr 15, 2008
Hello,
Here is my problem:
I use SQL Server 2005. I have approx. 50 tables in my database and 30 of them have a filed named "CompanyID". Example:
create table A (ID int identity, NAME varchar(100), COMPANYID int)create table A (ID int identity, REF_ID int, FIELD1 varchar(100), FIELD2 varchar(100), COMPANYID int)
Also there are nearly 200 stored procedures that read data from these tables. Example:
create procedure ABCasbegin /* some checks and expressions here ... */ select ... from A inner join B on (A.ID = B.REF_ID) where ... /* ... */end;
All my queries in the Stored procedure does not filter the tables by CompanyID, so they process the entire data.
However, now we have a requirement to separate the data for each company. That means that we have to put a filter by CompanyID to each of those 20 tables in each query where the tables appear.
Firstly, I put the CompanyID in the context so now its value is accessible through the context_info() function. Thus I do not need now to pass it as a parameter to the stored procedures.
However, I don't know what is the easiest and fastest way to filter the tables. Example:
I modified the above mentioned procedure in the following way:
create procedure ABCasbegin /* some checks and expressions here ... */
-- gets the CompanyID from the context: DECLARE @CompanyID int; SELECT @CompanyID = CONVERT(float, CONVERT(varchar(128), context_info()))
select ... from A inner join B on (A.ID = B.REF_ID) where ...
and A.COMPANYID = @CompanyID and B.COMPANYID = @CompanyID /* ... */end;
Now I have the desired filter by CompanyID. However, modifying over 200 stored procedures is rather tedious work and I don't think that this is the best approach. Is there any functionality in SQL Server that can provide the possibility to put an automatic filter to the tables.
For example: when I wrote "SELECT * FROM A", the actual statements to be executed would be "SELECT * FROM A WHERE CompanyID = CONVERT(float, CONVERT(varchar(128), context_info()))".
I was looking for something like "INSTEAD OF SELECT" triggers but I didn't manage to find any answer.
I would very grateful is someone suggests a solution for something like "global table filter" (that will help me make an easy refactoring)?
Thanks in advance.
Best regards,
Beroetz
View 5 Replies
View Related
May 11, 2006
I have a simple ASP.NET application that allows the user to enter a Query in a TextArea and submit that to the database. Queries that contain Integer, String or other filters seem to work fine, but when the Query contains a Date or DateTime I have problems.
Here is an example that works fine in Query analyzer but fails when executed in ASP.NET.
"select top 10 * from Subscribers where StartDate < '09-03-2002'"
In Query Analyzer no problem, in ASP.NET I get this error...
Line 1: Incorrect syntax near ';'
However if the Query uses '=' instead of a '<' or '' then it works without error
"select top 10 * from Subscribers where StartDate ='09-03-2002'"
Any help would be appreciated
View 3 Replies
View Related
Jul 12, 2012
how to add a date range filter to my database query. I want to be able to enter a date into ("E,6") and have VBA pull data >,= to that date range according to my "OPENED_DATE" dates. My code is pasted below:
'Create header names
wkbOne.Worksheets("Sheet1").Cells(1, 1).Value = "PART_NUMBER"
wkbOne.Worksheets("Sheet1").Cells(1, 2).Value = "SFC"
wkbOne.Worksheets("Sheet1").Cells(1, 3).Value = "OPERATION"
wkbOne.Worksheets("Sheet1").Cells(1, 4).Value = "NC_CODE"
wkbOne.Worksheets("Sheet1").Cells(1, 5).Value = "OPENED_DATE"
[code]....
View 1 Replies
View Related
Apr 8, 2004
i am having 3000 records in table. now i want take out the duplicate from that table.
for example: i want to find out the duplicates of 'CompanyNames'.
help needed to write query for this operation.
View 2 Replies
View Related
Aug 21, 2015
I need to return 1 ip address for each machine. I can easily achieve this with using group by and return max(ipaddress) however I would like to filter out specific range '192.168.%' but only want to do that if machine has more then 1 ip address. If the machine has only 1 ip address then it can return it even if its '192.168.%'
below is test table to show sample data
CREATE TABLE dbo.[testip](
[machineid] INT NULL,
[ipaddress] [varchar](20) NULL
)
GO
INSERT INTO [dbo].[testip] ([machineid],[ipaddress]) VALUES (1,'155.119.1.22')
INSERT INTO [dbo].[testip] ([machineid],[ipaddress]) VALUES (1,'192.168.1.5')
[code]....
View 4 Replies
View Related
Apr 23, 2008
I currently have a query in an access database that filters the records in a Sql Linked table for their user ID. So basically i use Environ("UserName") to filter for a field that contains their user name. I want to secure this and put it on the SQL Server so there is no way anyone can see any records other then the ones that are filtered for them. Does anyone know how to do this? I think it will be some SQL query.
I'm still learning sql server 2005.
Thanks.
View 3 Replies
View Related
Nov 14, 2015
Please refer to the below query. I want to filter inner join rows based on outer query column value (refer to bold text).
SELECT M.MouldId, SI.StockCode, MI.Cavity, MI.ShotCounter, CQ.SumOfCastedQty  as CastedQty, MI.CounterStartupÂ
FROM Â Â Â Â MouldItem MI
JOIN (SELECT JD.MouldId, JC.StockCode, SUM(JS.CastedQty) AS SumOfCastedQty
FROM JobCasting AS JS INNER JOIN JobCreationDet AS JD ON JS.JobDetId = JD.Uniid INNER JOIN JobCreation AS JC ON JD.JobIdx = JC.Uniid
[Code] ....
View 2 Replies
View Related
May 24, 2008
Hi friendsI have little problem here.I am creating data tables dynamically.I want to filter it using sql query.Suppose,
I have four data tables with the same structure but records may be
different.There are two fields ServiceMethod and Rates.Now I want to filter all tables and want to get match records with the ServiceMethod.Suppose,four records in First table,three records in other three tables,and only two records(Service method) are same in all tables.I
want to that two records by filtering all tables and sum of rates and
want to add matched records in new table and bind dropdownlist.Can any guide me how to filter more than one tables using sql query if data tables are created dynamically?Thanks in advance.
View 2 Replies
View Related
Jan 21, 2014
I have a data column named Date_In with format of 20-May-13. How can I filter the data to select based on year only. I used
Select
*
From apps.xdmc_852@erpprod
Where Year(Date_in) = 2014
This code is not working. I also need a way to automatically update to next week range. For example, last week I used where function like this
Where Date_in = to_date('01/12/2014','MM/DD/YYYY')
Is there a way it will automatically at the next 7 days to the code above when the date is available. This week I have to go back and changed the code in to this:
Where Date_in = to_date('01/19/2014','MM/DD/YYYY')
View 3 Replies
View Related
Jul 6, 2015
Is there a way to define a query-filter (Example: WHERE column1 > 5 AND column2 = 'value') in a function?
So I can create a query like this:
SELECT *
 FROM Table
 WHERE MyFunction()
I know it's a bit of a strange question, but I'm writing a dynamic software that will have the ability to run Stored Procedures on any database to create some data-checks. Through parametrisation, a user can define for a specific Stored Procedure that some results are no longer necessary in the result-set.
Example:
ID - Name - State
1 - Jozef De Veuster - Mad
2 - Piet Husentruut - Not Happy
3 - Jeroen Meus - Angry
Is the result of a Stored Procedure "Show_me_unhappy_persons". But we already know that Jozef De Veuster is ALWAYS Mad, so a user can say: Exclude ID = 1, so it won't appear anymore in the result.
I want to handle this by doing:
SELECT *
FROM PeopleStates
WHERE --Some stuff--
AND CheckUserExclusions(SomeID)
And CheckUserExclusions will translate to "NOT (ID = 1)"
View 14 Replies
View Related
Jan 26, 2006
Howdy,
I have a table that has a group. In this group, I want to filter by 2 different expressions, concatenated with an OR. BUT I can't change the "And/Or" column value for the first entry because it is grayed out. The column will automatically change to an OR value if both my expression column fields are the same (which I don€™t want) but if I put any other value in to the expression field of the second row, the "And/Or" field of the first row automatically changes to an AND.
PLEASE! How do I get the And/Or field "ungrayed" so I can change it to what I want?
The 2 filters I and using check the UserID = to the user, and the other is checking a count to get the Top N 1. (So just showing the current user and the top producer)
View 14 Replies
View Related
Nov 12, 2007
Good morning all,
I have searched everywhere for this and I can't find any information on it. When I use the Query Builder, in the top pane, the Filter pane, there are five columnsimension, Hierarchy, Operator, Filter Expession and Parameters.
In the dropdown for Operator, one of the choices is MDX. I cannot find any documentation on how to use this operator. I want to limit my filter to SELF_AND_AFTER, and I am hoping that this is possible using this operator. I know how to hand code it, but I have a ton of other tweaks to make to the query, so I want to use the Query Designer as much as I can.
Does anyone have any links to documentation on how to use this operator?
Thanks,
Kathryn
View 2 Replies
View Related
Oct 1, 2014
I am looking to filter the query using the free text predicate Contains for one of the column that have dimensions of the items. The query is something like
Select * from sampletable
where contains(filtercolumn, 'Near("*cm , *cm , *cm , *Kg.",10,True)')
Data in the filtercolumn is something like 64cm x 25cm x 35cm = 10Kg.
The query do not return any data.I also tried running the below query to see if cm* can be searcher for, but with no result again
Select * from sampletable
where contains(filtercolumn,, '"cm*"')
If I do something like below, it does return all columns that have 35cm within the text.
Select * from sampletable
where contains(filtercolumn,, '"35cm"')
View 1 Replies
View Related
Oct 14, 2009
I am creating a SSRS report using a SSAS cube as it data source. The user would like to select multiple values from a reporting parameter that is then used as a filter on the MDX statement. I am bale to have the report work successfully when only one value is selected but not when multiple values are selected; the report uses only the first value from the reporting parameter when it contains multiple values. How do I filter an MDX query using a SSRS report parameter with multiple values?
View 3 Replies
View Related
Feb 12, 2008
Hello. I currently have a website that has a table on one webpage. When a record is clicked, the primary key of that record is transfered in the query string to another page and fed into an sql statement. In this case its selecting a project on the first page, and displaying all the scripts for that project on another page. I also have an additional dropdownlist on the second page that i use to filter the scripts by an attribute called 'testdomain'. At present this works to an extent. When i click a project, i am navigated to the scripts page which is empty except for the dropdownlist. i then select a 'testdomain' from the dropdownlist and the page populates with scripts (formview) for the particular test domain. what i would like is for all the scripts to be displayed using the formview in the first instance when the user arrives at the second page. from there, they can then filter the scripts using the dropdownlist.
My current SQL statement is as follows.
SelectCommand="SELECT * FROM [TestScript] WHERE (([ProjectID] = @ProjectID) AND ([TestDomain] = @TestDomain))"
So what is happening is when testdomain = a null value, it does not select any scripts. Is there a way i can achieve the behaivour of the page as i outlined above? Any help would be appreciated.
Thanks,
James.
View 1 Replies
View Related
Feb 3, 2007
Hello I am working in an advertising company and I have to find all records who have advertised 7 days back but if one person has advertised more than once means for different products, his name should come only once. How can I filter this. I am totally new to this language I can write simple query but don’t know how to filter it.
Name IndividualID Product Date
A 1 x 2007-01-27.23.59.59.777
A 1 y 2007-01-28.00.00.00.000
b 2 xx 2007-01-28.00.00.00.000
A 1 z 2007-01-28.00.00.00.000
b 2 yy 2007-01-28.00.00.00.000
A 1 p 2007-01-28.00.00.00.000
c 3 m 2007-01-28.00.00.00.000
d 1 n 2007-01-28.00.00.00.000
A 1 s 2007-01-28.00.00.00.000
View 1 Replies
View Related
May 17, 2007
Hi,
I have a supllier named K O'Neill and i want to filter on his name in my supplier table . Is this possible ?
When I try Vend Name = 'K O%Neill' it does not work.
Can anyone help?
Thanks.
View 6 Replies
View Related
Aug 21, 2006
I need a query that returns every n record from the database and the last record.
For every n-th is easy, but I need a
WHERE Index % n = 0
but I need a last one too.
Any Help.
View 3 Replies
View Related
May 24, 2007
Hi I am wandering if it is possible to achieve the following:
I am using Reporting Services and Reporting services I got a report with a text parameter.
I would like the user to introduce AA and find the product AA and when he introduces AA* it finds AA, AAD, AAC...
I am doing the following:
Filter([DIM Product].[Product].ALLMEMBERS,
,IIF(INSTR(@Product, "*") > 0
,[DIM Product].[Product].currentmember.name = Replace(@Product, "%", "")
,INSTR([DIM Product].[Product].currentmember.name, @Product)
)
)
The problem ist that the function Replace does not work!
Does someone know how to do it?
View 1 Replies
View Related
May 22, 2007
What is the syntax for using IN as a filter? in SQL it would be IN( 'A', 'B', 'C') but this does not work in Reporting services.
View 4 Replies
View Related
Jun 9, 2008
In a SQLDataSource, the following line throws an error as an undefined function. FilterExpression='left$(lname,1) = "D"'
Isn't this a standard VB function and why does it produce an error. How do I fix?
Thanks
View 2 Replies
View Related
Jun 8, 2006
Hi,
I am new in framework 2 and I can't find a way to filter the sqldatasource.
I have an sqldatasource control that retrive data from data base-"Select * from myTable"
I set the fiterExpression property-sqlDataSource1.FilterExpression="ID='" + strID + "' " ;
I don't know how to continue from here.If I bound the sqlDataSource1 to a control like gridView it works good and I see the filter oparation. but I want to get the result set in the code and loop threw it like I did with ver 1.1 with sqldataReader:
While sqlDatareader1.Read { myCode ... }
How can I do it with sqlDataSource ?
Thanks,
David
View 4 Replies
View Related
