I created a FTP Task to connect to an external FTP Server and download files nightly. I can connect using the FTP Connection Manager but when I execute the task, it says "[FTP Task] Error: Unable to connect to FTP server using "FTP Connection Manager". Any ideas?
View 6 Replies
I receive the following error message when I try to use the Bulk Insert Task to load BCP data into a table:
Error: 0xC002F304 at Bulk Insert Task, Bulk Insert Task: An error occurred with the following error message: "Cannot fetch a row from OLE DB provider "BULK" for linked server "(null)".The OLE DB provider "BULK" for linked server "(null)" reported an error. The provider did not give any information about the error.The bulk load failed. The column is too long in the data file for row 1, column 4. Verify that the field terminator and row terminator are specified correctly.Bulk load data conversion error (overflow) for row 1, column 1 (rowno).".
Task failed: Bulk Insert Task
In SSMS I am able to issue the following command and the data loads into a TableName table with no error messages:
BULK INSERT TableName
FROM 'C:DataDbTableName.bcp'
WITH (DATAFILETYPE='widenative');
What configuration is required for the Bulk Insert Task in SSIS to make the data load? BTW - the TableName.bcp file is bulk copy file as bcp widenative data type. The properties of the Bulk Insert Task are the following:
DataFileType: DTSBulkInsert_DataFileType_WideNative
RowTerminator: {CR}{LF}
Any help getting the bcp file to load would be appreciated. Let me know if you require any other information, thanks for all your help.
Paul
Hi,
I am trying to create a simple BI Application for SSIS. In Visual Studio 2005 I just get a Data Flow Task from the toolbar and add it to the project. When I double click it I get the following error:
The task with the name "Data Flow Task" and the creation name "DTS.Pipeline.1" is not registered for use on this computer.
Then when I try to delete it it gives this other error:
Cannot remove the specified item because it was not found in the specified Collection.
I am creating this application in an administrator account in this computer, so I doubt the problem is related to permissions. I am running SQL Server 2005 and Visual Studio 2005 in WinXP Tablet PC Edition.
Any suggestions why this is happening and how to fix it?
Hi,
I'm trying to get a record count out of a databse using OLE DB Source and row count tasks but keep getting an error. I set up a variable as int32 and select the variable name in the row count task and when I go to the Input Columns tab to select a field to count, it gives me this error:
Error at Data Flow Task[Row Count[505]]: The component "Row Count" (505) has forbidden the requested use of the input column with lineage ID 32.
I don't even know what this means?
thanks,
Hi -
I have an File System Task that copies a file from one directory ot another. When I hard code the target directory (c:dirfile.txt) it works fine. When I change it to a virtual directory (\serverdirfile.txt) I get a security error:
[File System Task] Error: An error occurred with the following error message: "Access to the path '\gracehbtest oS2TMM_Live_Title_000002.xml' is denied.".
Where do I change the security settings?
Thanks - Grace
I cannot execute a package by using Execute Package task.
I supplied sa credentials to connection manager, and it shows the list of Packages on SQL Server but when running the task it says
Error 0xC0202009 while preparing to load the package. An OLE DB error has occurred. Error code: 0x%1!8.8X!.
Any clue ?
Thanks,
Fahad
I'm trying to use an XML Task to do a simple XSLT operation, but it fails with this error message:
[XML Task] Error: An error occurred with the following error message: "There are multiple root elements. Line 5, position 2.".
The source XML file validates fine and I've successfully used it as the XML Source in a data flow task to load some SQL Server tables. It has very few line breaks, so the first 5 lines are pretty long: almost 4000 characters, including 34 start-tags, 19 end-tags, and 2 empty element tags. Here's the very beginning of it:
<?xml version="1.0" encoding="UTF-8"?>
<ESDU releaselevel="2006-02" createdate="26 May 2006"><package id="1" title="_standard" shorttitle="_standard" filename="pk_stan" supplementdate="01/05/2005" supplementlevel="1"><abstract><![CDATA[This package contains the standard ESDU Series.]]></abstract>
There is only 1 ESDU root element and only 1 package element.
Of course, the XSLT stylesheet is also an XML document in its own right. I specify it directly in the XML Task:
<?xml version="1.0" encoding="UTF-8"?>
<xsl:stylesheet version="1.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform"/>
<xsl:template name="identity" match="@*|node()">
<xsl:copy>
<xsl:apply-templates select="@*|node()"/>
</xsl:copy>
</xsl:template>
<xsl:template match="kw">
<xsl:copy>
<xsl:apply-templates select="@*"/>
<xsl:attribute name="ihs_cats_seq" select="position()"/>
<xsl:apply-templates select="node()"/>
</xsl:copy>
</xsl:template>
</xsl:stylesheet>
Its 5th line is the first xsl:template element.
What is going on here? I do not see multiple root elements in either the XML document or the XSLT stylesheet.
Thanks!
Hi,
I'm having an SSIS package which gives the following error when executed :
Error: 0xC002F210 at Create Linked Server, Execute SQL Task: Executing the query "exec (?)" failed with the following error: "Syntax error or access violation". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.Task failed: Create Linked Server
The package has a single Execute SQL task with the properties listed below :
General Properties
Result Set : None
ConnectionType : OLEDB
Connection : Connected to a Local Database (DB1)
SQLSourceType : Direct Input
SQL Statement : exec(?)
IsQueryStorePro : False
BypassPrepare : False
Parameter Mapping Properties
variableName Direction DataType ParameterName
User::AddLinkSql Input Varchar 0
'AddLinkSql' is a global variable of package scope of type string with the value
Exec sp_AddLinkedServer 'Srv1','','SQLOLEDB.1',@DataSrc='localhost',@catalog ='DB1'
When I try to execute the Query task, it fails with the above error. Also, the above the sql statement cannot be parsed and gives error "The query failed to parse. Syntax or access violation"
I would like to add that the above package was migrated from DTS, where it runs without any error, eventhough
it gives the same parse error message.
I would appreciate if anybody can help me out of this issue by suggeting where the problem is.
Thanks in Advance.
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
hello
I have a problem with Sql task
when sql task tried to assing a value to my variable I have this error ""La valeur n'est pas comprise dans la plage attendue."
I'm using ODBC connexion for a csv file
someone can help me ?
thanks
hi chaps
i m getting the following ERROR:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "JDETimezone": "Unable to find column Timezone in the result set.".
i know what the problem is i.e. no row is returned then what is the problem
here you are.... i want to it work... strange... ok i explain...
actully i have some processign to do with variable JDETimezone even no row is returned.... can u tell me the alternative to do the follwing task...
I want to retrieve a record from some table and do some processing and if no row is present or returned then i want to do seperate processing.... can ne one help me out ?
regards,
Anas
OK. I give up and need help. Hopefully it's something minor ...
I have a dataflow which returns email addresses to a recordset.
I pass this recordset into a ForEachLoop configuring the enumerator as (Foreach ADO Enumerator). I also map the email address as a variable with index 0.
I then have a Execute SQL task which receives this email address as a varchar variable (parameter 0) which I then use in my SQL command to limit the rows returned. I have commented out the where clause and returned all rows regardless of email address to try to troubleshoot this problem. In either event, I then use a resultset to store the query result of type object and result name 0.
I then pass this resultset into a script variable to start parsing the sql rows returned as type object. ( I assume this is the correct way to do this from other prior posts ...).
The script appears to throw an exception at the following line. I assume it's because I'm either not passing in the values properly or the query doesn't return anything. However, I am certain the query works as it executes just fine at the command prompt.
Try
ds = CType(Dts.Variables("VP_EMAIL_RESULTS_RS").Value, DataSet)
My intent is to email the query results to each email address with the following type of data by passing the parsed data from the script to a send mail task. Email works fine and sends out messages but the content is empty. I pass the parsed data as string values to the messagesource and define the messagesourcetype as a variable in the mail task.
part number leadtime
x 5
y 9
....
Does anyone have any idea what I might be doing wrong?
thanks
John
i set up a WMI Reader Task which works perfectly fine.
But when i Use WMI event watcher i get this error.
if the problem is with access rights how do i need to set or how can i figure out if i have rights..
[WMI Event Watcher Task] Error: Watching for the Wql query caused the following system exception: "Invalid class". Check the query for errors or WMI connection for access rights/permissions.
I am using SQL Server 2005 - CTP June 2005 and I am trying to create a simple FTP task. Currently, my package consists of one FTP Task object in the Control Flow tab. I create a new FTP Connection Manager using <New Connection> in the FtpConnection property and verify the connection by selecting the "Test Connection" button. So far so good. However, when I return to the designer a red X appears in the FTP Task object with the following error:
View 5 Replies View Relatedi have really hard time with this.it sits there showing yellow or it neither runs...
how should this be actually set?
I'm trying to run a SQL Server 7.0 scheduled job that executes: Exec master..xp_cmdshell 'd:raining.bat'
If I run this in qry analyzer it runs fine. If I try to run it as a scheduled job it says 'can't find the specified file'
I'm a member of the sysadmins group and sqlexecagent is part of the NT admin group.
Can someone tell me how to fix this problem?
Hi,
I get this error when I execute a job calling a dts pkg. The package itself is fine and executes without any error.It's transferring around 400000 records. Shceduling the pkg gives the following error.
Can any body led a hand please?
DTSStep_DTSDataPumpTask_1 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 1000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 1000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 2000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 2000 DTSRun OnProgress: DTSStep_DTSDataPumpTask_1; 3000 Rows have been transformed or copied.; PercentComplete = 0; ProgressCount = 3000 DTSRun OnProgre... Process Exit Code 1. The step failed.
Thanks in advance
Barath M
I have an odd problem with the parameters in a SQL task.
I created a DTS package with an SQL task that uses a parameter marker in the WHERE cause. The value comes from a Global Var. The package runs fine but when I try to access the parameter mapping page I get this:
Syntax Error or Access Violation Error
Anybody know what to do about this?
It's not very efficient to have to rebuild the task every time I need to add a parameter.
Thanks
Is there any way to suppress the whole package from failing when a file is not found while doing an FTP get (other then setting the MaxErrorCount higher)?
My situation is that I know what a file is named but the file may not exist yet on the server. So, I use an FTP task to do a Get on that file. If the file does not exist then the FTP Task increments the error count even if I force the ExecutionResult and/or ExecutionValue.
This wouldn't be a very big deal but I am looping to getting and processing multiple files. It's acceptable that the file does not exist, but I want to be able to have the package actually error in other places. So far, the only thing I can do to stop the package from failing is setting the MaximumErrorCount for the Loop and the Package which isn't going to cut it.
I am hoping there is away around this without having to use a 3rd party FTP Task.
Thanks,
-Ryan
Hi,
I'm using Script task in my control flow.
It show the following error
"Validation error. Script : The task is configured to pre-compile the script, but binary code is not found. Please visit the IDE in Script Task Editor by clicking Design Script button to cause binary code to be generated."
How to overcome this error?
Hi all,
After applying the SP2 for Korean - we are getting the following error in the above task.
Transfer Fact Data From StagingDB to Presentation DB: Insert Update MetricFact [1021]: An OLE DB error has occurred. Error code: 0x80004005. An OLE DB record is available. Source: "Microsoft OLE DB Provider for SQL Server" Hresult: 0x80004005 Description: "'OPTIMIZE' ??? ??? ???????.".
Not sure what the problem is. The same task was running properly before applying the SP2.
For other language SP2 (on other languages) the same task runs correctly and without any error.
I am running a Execute SQL Task which runs a script on a table. It gives me following error:
[Execute SQL Task] Error: There is an invalid number of result bindings returned for the ResultSetType: "ResultSetType_SingleRow".
Thanks,
Hi..
I use an Execute SQL Task to return XML via a stored procedure but the task fails for some reason..
My Settings in Execute SQL Task Editor is:
General
ResultSet: XML
SqlStatement EXEC dbo.myProc
ResultSet
Result Name = 0
Variable Name = sXml (Variable Type = String)
When i run the proc (which uses FOR XML PATH) from Management Studio the following is returned (no outputparemeters are used):
<Data>
<Sty>
<Sys>PXX</Sys>
<Ftg>01</Ftg>
<Anv>xxx</Anv>
<Losen>yyyy</Losen>
<Fok>zzz</Fok>
<Funk>02</Funk>
</Sty>
<InkOrd B="N" Id="000945">
<InkOrdNr>000945</InkOrdNr>
<DelLevnsNr>0</DelLevnsNr>
<LagId>001</LagId>
<LevNr>000MAS</LevNr>
<LevDat>2006-10-26T00:00:00</LevDat>
<OrdTyp>01</OrdTyp>
<LevnsVillk>004</LevnsVillk>
<TranspSa>1</TranspSa>
<Sped>001004</Sped>
<BetVillk>017</BetVillk>
<ValuKod>EUR</ValuKod>
<ValuKurs>9.35</ValuKurs>
<InKop>Sara</InKop>
<LevRef>MR RUPINDER</LevRef>
<UpplDat>2006-09-07</UpplDat>
<BestDat>2006-09-18</BestDat>
<Rad B="N">
<InkOrdRad>1</InkOrdRad>
<LagArtNr>70903</LagArtNr>
<LagAttr1>001</LagAttr1>
<StlGrp />
<RabProc />
<KomplLevns />
<LevDat />
<Stl B="N">
<LagAttr2>001</LagAttr2>
<AntBest>3000</AntBest>
<AntVaruHus>0</AntVaruHus>
<InkPr>1.48</InkPr>
</Stl>
</Rad>
</InkOrd>
</Data>
When i run the Execute SQL Task i get the following error:
[Execute SQL Task] Error: Executing the query "exec dbo.myProc " failed with the following error: "End tag 'ROOT' does not match the start tag 'LagArtNr'. ". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Sicne the XML is valid I have no idea why the task fails...
I have read this link...
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=619288&SiteID=1
... where using FOR XML RAW should do it, but it doesn´t help me
Any ideas?
Have a nice day /erik
Hi,
I have a For Loop Container which has Execute SQL Task. The following SQL is not working in it.
Input Parameters: Batch_ID, Class_ID both of type long in the parameter mapping dialog.
The result set is of type 'One Row' and direction is input
Result set is: NextBatchID------>User::MinBatch_ID of type int
NextClassID------->User::MinClass_ID of type int
The query is giving very generic error
[Execute SQL Task] Error: Executing the query "" failed with the following error: "Syntax error, permission violation, or other nonspecific error". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Code Snippet
DECLARE @ClassID int
DECLARE @BatchID int
SET @BatchID = ?
SET @ClassID = ?
SELECT MAX(T.Batch_ID) AS NextBatch_ID, MAX(T.Class_ID) AS NextClass_ID FROM
(Select TOP (10) BD.Batch_ID, BD.Class_ID,
ROW_NUMBER() OVER(ORDER BY Batch_ID, Class_ID)AS RowNum
From dbo.Batch_Data As BD
WHERE (BD.Batch_ID > @BatchID) OR (BD.Batch_ID = @BatchID AND BD.Class > @ClassID)
ORDER BY Batch_ID, Class_ID) T
WHERE T.RowNum = 10
When I hardcode values the query works. With parameters it fails.
Any help/thought?
-Leo
Have you ever gotten an error when copying a task in the designer? I can't copy a task. That's going to be a pain for developing big packages. I have already uninstalled BIDS and installed Visual Studio and still get the error. Any thoughts on what could I could remove and reinstall to get a working environment? Would removing VS and SQL 2005 and all its components work? I ran some of the CTP cleanup tools (ttool and msiinv) and they reported no problems and no beta software
TITLE: Microsoft Visual Studio
------------------------------
An error occurred while objects were being copied. SSIS Designer could not serialize the SSIS runtime objects.
------------------------------
ADDITIONAL INFORMATION:
Could not copy object 'info Script Task' to the clipboard.
(Microsoft.DataTransformationServices.Design)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%u00ae+Visual+Studio%u00ae+2005&ProdVer=8.0.50727.42&EvtSrc=Microsoft.DataTransformationServices.Design.SR&EvtID=SerializeComponentsFailed&LinkId=20476
------------------------------
Invalid access to memory location. (Exception from HRESULT: 0x800703E6) (Microsoft.SqlServer.ManagedDTS)
------------------------------
BUTTONS:
OK
------------------------------
I posted here the same question in the VS Installation and Setup forum http://forums.microsoft.com/MSDN/ShowForum.aspx?ForumID=26&SiteID=1, but I think this forum may be more on target.
Hello,
Once in a while we receive this error from a script task in an SSIS package that runs from a scheduled job:
Unable to receive files using "FTPConnMngr".
A search on google yielded nothing. Has anyone encountered this error, and/or what are some possible causes?
Thank you
I get the following error when trying to execute an sql statement in oracle and returning the results into an object variable with the execute sql task.
Error: 0xC002F210 at Execute SQL Task, Execute SQL Task: Executing the query "select <columnlist> from <tablename>" failed with the following error: "The SelectCommand property has not been initialized before calling 'Fill'.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
It executes fine if I select no results or first row but I can't get full result set to work. The query and connection string are valid. Any ideas?
I have the following code inside a Script task:
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports System.Collections
Public Class ScriptMain
Public Sub Main()
Dim nm As String = "ship_metrics_rpt_*.csv"
Dim files As ObjectModel.ReadOnlyCollection(Of String) = My.Computer.FileSystem. _
GetFiles(CStr(Dts.Variables("MainPath").Value))
If files.Count > 0 Then
Dim dic As Generic.SortedDictionary(Of Date, String)
For a As Integer = 1 To files.Count
If files(a) Like nm Then
Dim nfo As System.IO.FileInfo = My.Computer.FileSystem.GetFileInfo(files(a))
dic.Add(nfo.CreationTime, files(a))
End If
Next
If dic.Count > 0 Then
Dim FinalFiles(dic.Count - 1) As String
Dim count As Integer
For Each kvp As Generic.KeyValuePair(Of Date, String) In dic
FinalFiles(count) = kvp.Value
Next
End If
End If
Dts.TaskResult = Dts.Results.Success
End Sub
The following exception gets thrown at "If files.Count > 0 Then"
"Index was out of range. Must be non-negative and less than the size of the collection.
Parameter name: index"
Why?
Thanks for your help
I cannot seem to get the FTP task to send files. I tested the process manually (not using ssis) and it works fine. I have tried many ways to transfer the files, using variables, including full paths, partial paths, etc. but I keep getting a "550 permission denied" error. I have rechecked all variables. Has anybody else had trouble sending files with the FTP task?
View 3 Replies View RelatedI am using an execute sql task as the last step in an SSIS package. The task has an insert statement in it that will be appending some transformed data to the end of a large table in our database.
All tasks are executing correctly except for this last one. It is giving me the following error that I cannot puzzle out:
Error: 0xC002F210 at LINPRM_Append, Execute SQL Task: Executing the query
"INSERT INTO LINPRM
SELECT * FROM LINPRM_Append"
failed with the following error: "No disconnected record set is available for the specified SQL statement.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Task failed: LINPRM_Append
Does anyone have any ideas on how I might get past this error?
This is strange... just started getting this today, while it's worked for weeks. But alas, that is programming.
The error I'm getting is
[Connection manager "FTP DQ Connection"] Error: An error occurred in the requested FTP operation. Detailed error description: 200 Type set to I. 200 Command okay. 550 /usfsr/DFE_INPUT/FATest_DQ.txt: No such file or folder. .
I'm uploading a file (FATest_DQ.txt) to the folder /usfsr/DFE_INPUT/. I eventually just uploaded the file manually using IE6 to make sure the connection properties were still the same.
Any ideas?
Hi:
I am getting the following error message while trying to run a Execute SQL task with Variables in BIDS. My connection type is ADO.NET . My Variables defined are
Varout and Varin. Both are String type Variables. @varout has a value set to "Category" and @varin has a value set to "Test Category". I am using the expression
" Select * into " + @[User::VarOut] + " FROM " + @[User::Varin]
The expression eveluates correctly. The error I get when i run the package is:
Package Validation Error. Failed to lock Variable "Select * into TestCategory from category" for read access with error 0XC0010001. The Variable cannot be found. This occurs when an attempt is made to retrieve a variable from the variables collection on a container during the execution of package and the variable is not there. The Variable name may have changed or the Variable is not being created.
Can anyone please tell me what I am doing wrong or where do I need to look at?.
Thank you
AK
I am trying to configure a web service task. I have created the HTTP Connection, and specified the WSDL. When I select the service name on the Input page, I get the error ...
Item has already been added. Key in dictionary: 'BaseTO' Key being added: 'BaseTO'
I have previously been able to successfully configure the task in a separate project.
The Webservice methods take and return complex parameters. e.g. BaseTO above is custom transfer object type which the other transfer objects inherit. It is a List<> of some type of this object which is being passed/returned from the service.
I suspect these complex types will not be supported anyway but am puzzled by the original problem.
Any help much appreciated.
Greg.