FTP Task Fails - SSIS Scheduled With SQL SERVER AGENT As JOB
Nov 21, 2006
Hi,
I have created a SSIS package and tested it in V.Stdio where it runs fine and uploads file on the remote server.
Now I have scheduled it to run as a job in SQL SERVER AGENT as JOB, but it fails when it comes to the upload task?
I am quite sure as it is something with FTP connection string or security, but can't figure it out.
I have simply added the IP/login/password in the connection manager for upload task.
Any help/ guidance would be great.
Thanks,
Ad
View 4 Replies
ADVERTISEMENT
May 13, 2008
I have one SSIS package that fails on occasion. And I can then run this in the job by itself after it fails and it runs fine. Any ideas? Any ideas on what is causing this. It is not every day but about once a week lately but it just happened again today to this is 2nd time in 4 days this has happened. It is always on this same part in the SSIS that it fails when it does fail. 4 times in last 2 weeks.
This step it is on here has a OLE DB - DB2 source and SQL server as destination. It does a couple data conversion, derived columns and then just copies the data from the db2 table to the sql server table.
Message
Executed as user: PERFORMANCEstacyadmin. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 6:06:12 AM Error: 2008-05-13 06:09:22.84 Code: 0xC0202071 Source: Copy SalesTender Retail TmpSalesTenderRetail [97] Description: Unable to prepare the SSIS bulk insert for data insertion. End Error Error: 2008-05-13 06:09:23.42 Code: 0xC004701A Source: Copy SalesTender Retail DTS.Pipeline Description: component "TmpSalesTenderRetail" (97) failed the pre-execute phase and returned error code 0xC0202071. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 6:06:12 AM Finished: 6:09:23 AM Elapsed: 191.157 seconds. The package execution failed. The step failed.
Stacy
View 2 Replies
View Related
Feb 12, 2008
Hi All,
I'm a bit lost on this...
I have an SSIS package which writes to a configured public MSMQ. When run directly through Visual Studio, file system or msdb it works fine (I guess these use me as the user).
However, when I schedule it through an SQL Agent Job it fails with the following:
Failed to write message ... to the queue.
This seems like a permissions thing to me, but I've tried giving full control to everyone in the MSMQ permissions, also explicitly giving full control to the user that the agent job executes as. Neither made a difference.
Any help would be greatly appreciated.
Cheers,
Tony Vaughan.
View 2 Replies
View Related
May 7, 2006
I have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
View 1 Replies
View Related
Oct 10, 2007
We have a Process Task component setup in a couple SSIS jobs to call a command batch file to support transfering a file via Secure FTP to other servers and the process works fine if we start the SQL Agent job manually, however when the job is started via the scheduler, it fails with an exit code of 4. Even though there is a proxy setup on the agent job, is there a different user account being invoked by the scheduler??? We're on 2005 SP1 Hotfix 1 (2153). Thanks
Some more info...have found that if we leave a login session open on the server (login is the proxy account) the process works. It appears the issue is associated with a need to render/create a command window for the command line/batch process to run in and without an active windows session it fails....would seem to be that a product setup to run on a server in a batch mode would be able to work without this...is this the case? if so, how? Thanks.
View 11 Replies
View Related
May 8, 2006
We are not certain if this has happened due to the SSIS FTP Task, but incidently the Excel file that is being copied from the FTP site using an SSIS FTP Task got corrupted a couple hours after the package was scheduled as a SQL Server Agent Job on SQL Server 2005.
I had a SQL Server 2000 DTS package doing the same thing, but it was never an issue then. I was using the FTP Task there along with an Excel Data source in that and has been working for a couple years atleast with never any corruption related issues.
In the SSIS SQL Server 2005 package I am using an FTP Task with an Excel Connection Manager and Excel source and the Excel file got corrupted within a couple hours of the package being scheduled as a SQL Server Agent job.
Has anyone experienced this issue? Any inputs will be appreciated.
Just as an fyi, the excel file has a lot of vlookups.
Thanks,
MShah
View 1 Replies
View Related
Mar 31, 2004
Folks,
I have a DTS job that imports data from text files (specified as odbc connections) from a remote server into a sql table on the same SQL server that the job has been created on.
The job runs fine if execute directly from the server. If I schedule the same job on the server (through jobs) executing under the same user, the job fails with..
Executed as user: mydomainmylogin . ...art: DTSStep_DTSActiveScriptTask_1 DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1 DTSRun OnStart: DTSStep_DTSDataPumpTask_1 DTSRun OnError: DTSStep_DTSDataPumpTask_1, Error = -2147467259 (80004005) Error string: [Microsoft][ODBC Text Driver] '(unknown)' is not a valid path. Make sure that the path name is spelled correctly and that you are connected to the server on which the file resides. Error source: Microsoft OLE DB Provider for ODBC Drivers Help file: Help context: 0 Error Detail Records: Error: -2147467259 (80004005); Provider Error: 1023 (3FF) Error string: Error source: Help file: Help context: 0 DTSRun OnFinish: DTSStep_DTSDataPumpTask_1 Error: -2147220440 (80040428); Provider Error: 0 (0) Error string: Package failed because Step 'DTSStep_DTSDataPumpTask_1' failed. Error source: Microsoft Data Transformation Services ... Process Exit Code 1. The step failed.
How come it loses the path to the file when I dont run it directly?
Cheers
Mick
View 4 Replies
View Related
May 9, 2006
HELP! I have been banging my head against a brick wall on this one all this morning AAAAAAGGGHHH!
1. I have an SSIS package that runs a simple SQL script and then updates a few tables by downloading some XML of the web. It runs fine when I kick it off manually under SSMS.
2. I created a SQL Server Agent job to run it every day. This always fails. The error information in the log is useless ("Executed as user: domainuser. The package execution failed. The step failed." - I had already figured that out!). It fails almost straight away, and when I enable logging for the SSIS package, no info is ever logged (text file, windows event log, whatever).
3. Out of desperation I have changed Agent to run under the same domain user account that I created the package with. No use.
My questions:
1. How can I get more detailed logging from SQL Server Agent?
2 Any ideas about why it's failing in the first place.
Many thanks in advance.
Ben
View 17 Replies
View Related
Jun 10, 2005
I've created an SSIS package that retrieves a file from an FTP
View 13 Replies
View Related
Feb 9, 2005
I searched the forum's threads on this, and while there were many results, none have helped so far.
I am running a DTS package that is an ACtiveX Script Task using VBScript. The script uses CreateObject() to create a FileSystemObject to copy an .MDB before importing the tables into SQL Server. I want to copy it because of Access' notoriety of corrupting, and this much data being pumped out of Access could force me to Compact & Repair. I would rather do that on a copy.
Function Main()
Dim FSO
Set FSO=CreateObject("Scripting.FileSystemObject")
FSO.CopyFile "\<server><Share>Data.mdb", "\<server>C$DataCopyData.mdb"
Main = DTSTaskExecResult_Success
End Function
The DTS Package runs when I execute it from Ent. Manager, of course. It fails if scheduled, or course :(
I have set the Owner of the Scheduled Task to my domain account, which is also in the Adminstrators Group on the physical server with the SQL Server installation (Windows 2003 Server). I also did the unnecessary task of adding my domain account specifically to the destination folder, which is also Shared.
My sqlagent.exe service runs as SYSTEM on the server, so the SQLAgent should have no problem copying a file from one folder on the server to another.
The Scheduled Task fails with the common error:
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSActiveScriptTask_1
DTSRun OnError: DTSStep_DTSActiveScriptTask_1, Error = -2147220482 (800403FE)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
Error Detail Records:
Error: -2147220482 (800403FE); Provider Error: 0 (0)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1
DTSRun: Package execution complete.
I checked this MS KB Article (http://support.microsoft.com/kb/q298725/), but the instructions after opening DCOMcnfg.exe do not follow what is shown in the WMI window on Windows 2003 Server :rolleyes: (i.e. there is no "Default Security" tab to click.)
I am at a loss here. Thanks for your help.
View 4 Replies
View Related
Oct 1, 2007
I have an SSIS ETL Package that runs perfectly in debugger.
It is saved to the local SQL Server using "rely on server security".
The SQL Server Agent job runs at night and the job fails right at the last step. It is actually loading the data, because I write a record with row counts to an audit table, and they are successfully incrementing.
The real issue to me is that it is failing randomly, sometimes it will run 7 times then fail once, others it will go 2 or 3 days then fail. The job runs at the same time every night, and takes within a minute or two variance.
I've looked at the logs, and done a trace, and I can't seem to find anything that would cause the failure. The closest thing to an error is a join parameter note in the trace that's on tthe MSDB database.
Not a lot to work with, I know... but does anybody have any advice for me? Thank you in advance!
View 2 Replies
View Related
Nov 28, 2007
Hello,
I try to run a job from SQL Server Agent to execute an SSIS package, but it always fails. However, if I execute the SSIS package directly, it will succeed.
The SQL Agent Job History shows "Unable to start execution of step 1 (reason: Error authenticating proxy DB1DB1_CREDENTIAL, system error: Logon failure: unknown user name or bad password.). The step failed."
P.S. DB1 is my server name, DB1_CREDENTIAL is the account creating the credential
The SQL Server Agent Error Log shows "[298] SQLServer Error: 22046, Impersonation error. [SQLSTATE 42000]"
I've created an account on OS and assigned it to a credential.
Then, I created a proxy with the credential and then created the SQL Server Agent job with that proxy.
P.S. My SSIS package protection level is created as "Rely on server storage and roles for access control", because if it is set as "Do not save any sensitive data", package execution will fail even I run it directly.
How can I successfully run SSIS package from SQL Server Agent?
Do I lose any setting steps?
Thanks for help.
Lilia
View 18 Replies
View Related
Feb 21, 2008
HI,
I am having a strange error coming in SQL server 2005.
I had a DTS package developed in SQl server 2000. Then i had migrated that DTS package to SSIS package using Execute DTS 2000 package. The conversion is successfull.
Then when i manullt execute this package it runs successfully without giving any error.
But then wheh i schedule a SQL server agent job for the same above SSIS package it fails giving me some cryptographic error as follows:
Message
Executed as user: CATOS-CGDBTUW02SYSTEM. ....3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "PackagePassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:00.66 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "SQLPassword" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-02-20 23:00:01.00 Code: 0x00000000 Source: Execute DTS 2000 Package T... The package execution fa... The step failed.
Not sure why is this happening.
Manually running the SSIS package from Visual studio does not gives error, but the same SSIS package when is been schedule from SQL server 2005's SQL server agent job it fails giving above error.
Please help me out how to rectify whith this.
Thanks.. in advance
Regards,
Ashok
View 3 Replies
View Related
May 5, 2006
Hi,
Can we allow SSIS to be scheduled via SQL Agent. Is there any security concerns.
Thanks & Regards
Shri.DBA
View 4 Replies
View Related
May 18, 2007
Hello,
I try to create a SSIS package only use SQL server agent job tasks(some in 2000 and some in 2005) in control flow. Basically if the first secheduled job failed the package will stop. I linked the first and the second job with 'on success' precedence constraint. But when I build or run the package it always return execution success and run the second one. And I know for sure the first job is failed through enterprise manager - management - jobs
Could somebody advice what could possibly went wrong?
Thanks.
Flora
View 7 Replies
View Related
Apr 17, 2007
I have a SSIS package that consists of 3 Script Tasks, two Data Flow Tasks. Each script tasks executes a FTP command. The first one renames the file, the second gets the renamed file and third resets it back to original name for testing.
When I run via BIDS or DTSExec all work fine. When I schedule it, only the first script runs. It never downloads the file.
Setup - SQL 2005 SP2, SSIS is running, 32 bit OS, SQL Agent Account is local admin. Package protection level is DontSaveSensitive. PrecompileScriptIntoBinaryCode = True
What am I missing??
Thanks
Mike Allen
View 7 Replies
View Related
Oct 19, 2010
I have a SSIS package which reads an excel file and loads data into a table using script component(C#) as a source. The package runs without any errors when I manually run it on my machine and on the server. But the package fails when run as a SQL Server Agent job.
I tried all the possible fixes I found on the web but still can't get it to work.
View 14 Replies
View Related
Jun 23, 2006
I created a SQL Server Agent job that contains an SSIS task. This task runs succesfully from BIDS. From the SQL Server Agent job it never completes while trying to run the SSIS task that needs to open an WS_FTP command line window to run an sftp step and then close.
I had this working on my local machine, Windows XP SP2, using the SSIS service using the local system account with "Allow Service to Interact with Desktop" checked. I needed to check this option for it to work. Otherwise the routine just hung without completing or an error message.
On our test machine running Windows 2003 with SP1 the SQL Server Agent and SSIS services are set to run under the NT Authority/NetworkServices account. I set the permissions on this account based from the list shown at SQL Server 2005 Books Online, Selecting an Account for the SQL Server Agent Service ,http://msdn2.microsoft.com/en-us/library/ms191543.aspx. I also needed to set folder permission on this account to access the files I wanted to ftp.
What I don't know what to do and that I suspect might be the problem is how to set the equivalent of, "Allow Service to Interact with Desktop" for this account. This was only an option under the local system account.
I would appreciate any ideas and guidance on how to deal with this case. Thanks.
View 4 Replies
View Related
Apr 16, 2008
Hi,
I have one SSIS package which is written in Visual studio business intelligence tool. For that SSIS packages i have scheduled a job from SQL server management studio 2005. I mean i have scheduled a job in SQL server agent.
This job which i have scheduled contains 6 SSIS packages and the other 5 SSIS packages executes successfully but this only fails giving sone com.Interop exception.
But it is failing giving some com.interop exception. Not sure what type of error is this?
It give following type error:
Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 11:00:00 PM Error: 2008-03-27 23:00:00.81 Code: 0x00000000 Source: Execute DTS 2000 Package Task Description: System.Runtime.InteropServices.COMException (0x80040427): Execution was canceled by user. at DTS.PackageClass.Execute() at Microsoft.SqlServer.Dts.Tasks.Exec80PackageTask.Exec80PackageTask.ExecuteThread() End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 11:00:00 PM Finished: 11:00:00 PM Elapsed: 0.579 seconds. The package execution failed. The step failed.
I get the same error when i try to execute the package from Visual studio Business Intelligence tool.
Can you please help me out as to what is this "System.Runtime.InteropServices.COMException" exception occuring when scheduling or executing the job.
Thanks,
Ashok
View 1 Replies
View Related
Apr 1, 2008
Hello
I'm trying to run a task that executes a script file (cmd). When i run it with in bids with my own users (domain admin) it works. When i start a cmd prompt and try to run the cmd file directly from the network location where it is it works (with my own rights and with the sql server agent user).
Now when i try to run in from smss > agent jobs > job and run job it never completes. Im not getting any error message either it just keeps on running on the step ??? It seems like a rights issue, but the account running the sql server agent is able to execute the cmd file directly from the command prompt.
There are no errors in any error logs anywhere and no error is displayed...
Ps. Im running the job step as a integration service pacgake.
View 8 Replies
View Related
Oct 2, 2007
We have a vendor who has an SSIS package that executes a DTS package. We've asked that they migrate the DTS code completely to SSIS, but that is something that will not be done in the near future. The package is scheduled to run every 5 minutes through a SQL Server scheduled job. 95% of the time the package executes without an error, but occassionally the following error is reported.
Date 10/2/2007 7:35:00 AM
Log Job History (Pyxis - Data Load)
Step ID 1
Server DEVSQL1V5
Job Name Pyxis - Data Load
Step Name Run SSIS Package
Duration 00:00:03
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: Domain_NameSQLService. The return value was unknown. The process exit code was -1073741819. The step failed.
When I look at the DTS and SSIS package logs no errors are reported and each log indicates the package completed successfully.
Any ideas what this exit code is indicating or how to further troubleshoot the problem?
Thanks, Dave
View 4 Replies
View Related
Mar 12, 2008
Hi,
I created a SSIS Package and now i want to run this package from SQL Agent Job. I set up the job and when i run it, it failed
Job Properties:
Type: SQL Server Integration Services Package
Run As: SQL Agnet Service Account
Package Source: File System
Package: \pc17917c$Documents and Settingskdesai1DesktopSSISTest1Test1Package.dtsx
Error i got when i execute the job.
Description: Fauiled to decrypt protected XML node "PassWord" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:54.48 Code: 0xC0016016 Source: Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2008-03-12 10:50:55.07 Code: 0xC0048006 Source: Drop Table ActiveX Script Task ... The package execution fa... The step failed.
I'm new to the SQL 2005 SSIS. Can you please help resolve this problem?
Thanks,
KD
View 13 Replies
View Related
Sep 27, 2006
Okay, I see that dozens of posters have this problem, but none of the threads has a solution: Why does an SSIS package run perfectly fine in VS and in Integration Services, but fail with no details in SQL Agent? Is there another way to have an SSIS package run regularly?
Thanks.
View 5 Replies
View Related
Jun 11, 2007
I did a small package with only one ODBC connection (Merant 3.70 32-Bit Progess). This package runs well in Visual Studio and fails when runs by SQL Server Agent.
Configuration:
SQL Server Agent on a 32Bit server.
The ODBC connection configuration in available on System DSN on this server.
The user of Server Agent have full access (Admin).
Connect Manager Provider: ".Net ProvidersOdbc Data Provider"
SQL Server version: 9.0.3042
Error Message:
Executed as user: TEKCON cadmin. ...ion 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 16:50:33 Error: 2007-06-11 16:50:33.62 Code: 0xC0047062 Source: Data Flow Task DataReader Source [1] Description: System.Data.Odbc.OdbcException: ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. ERROR [HYC00] [MERANT][ODBC PROGRESS driver]Optional feature not implemented. ERROR [HY000] [MERANT][ODBC PROGRESS driver]msgOpen: unable to open message file: PROMSGS ERROR [IM006] [MERANT][ODBC PROGRESS driver]Driver's SQLSetConnectAttr failed. at System.Data.Odbc.OdbcConnection.HandleError(OdbcHandle hrHandle, RetCode retcode) at System.Data.Odbc.OdbcConnectionHandle..ctor(OdbcConnection connection, OdbcCon... The package execution fa... The step failed.
I created a .bat file with this instruction and It's run well:
dtexec /f "C:Program FilesMicrosoft SQL Server90DTSPackagesIntegration Services Project estcom.dtsx"
pause
Why it's not running with SQL Server Agent???
View 7 Replies
View Related
Feb 7, 2007
Hi,
I have an SSIS package that utilises a 3rd party ftp program to transfer files (over HTTPS). This software stores details in the users profile relating to addresses, user names and password for transfers. As this is the case the Package needs to be executed by the domain user who has the details set in their profile. The package needs to be executed at a scheduled interval - so I have set up an Agent job to do this, and have the the 'Run As' setting, as a proxy which maps to the required domain user.
The package works fine when executing manually when the required user is logged in. If, however, the user is not logged in - ie when the job kicks off at the schecduled time, the file transfer fails. On debugging I can see that the agent job does not load the user's profile -but instead uses the 'Default User' profile.
The job owner is set as the same domain user that the Run As setting for the step is set. The SQL Server Agent services runs as a different Domain user.
Has anyone else had similar problems - Are there any extra permissions I need to set?
cheers..
View 4 Replies
View Related
Oct 16, 2006
I need some help from you on a problem with SQL Server Agent that I believe many of you have experienced. When searching on the web I find some loose answers, but it would not solve my problems. So here is my story.
1. I have created two SSIS packages, package 1 and package 2. Both packages have a Execute SQL Task making a select sql statement to a table, say Customer in AdventureWorks DB. Package1 also makes a Execute Pacakge Task to Package 2. Both packages have protectionlevel property set to EncryptSensitiveWithUserKey
2. Then I created two package configuration files per package, one indirect xml configuration and one xml configuration file. The former I created an environment variable called pack1, which was specifying the path and file name of second config file. Likewise, I did for package2. Maybe I could have reused thie first configuration file, but I am not sure since package1 calls package2.
3. Now I build and deploy my packages. Then I run my manifest file, going through the deployment wizard setting the necceccary properties like server name, user, password, I have also create the same environment variables on the deployment machine. I ensure that the package1 and package2 can be run under integration services (file system). And both package works. So far so good
4. Now I want to create a SQL server agent job that runs package1 and package2. Here I found an article that decribed How to Schedule and Run a SSIS package ( DTS ) Job in SQL Server 2005 http://www.codeproject.com/useritems/Schedule__Run__SSIS__DTS.asp
5. I created a job executor account and then Create SQL proxy account and associate proxy account with job executor account as described. I created a new ssis job, specifying type ssis integration services, run as proxy, setting package source to SSIS package store, naming the server and package name (package2).
6. Now, I try running job1 which runs package2. ANd it works. I was aware if I needed to give file permission on users (read and execute) on my dtsx/dtsconfig/log files. So far so good
7. Now, I try to run job test which runs package1 (which also runs package2). But now the job fails :-(. The job runs for some seconds, but fails. I have to say that I have some script tasks with message boxes inside!!! hope this doesn't matter. I have created all neccessary accounts, proxies, credentials and so on. here is the view history
Date 17.10.2006 00:50:53
Log Job History (test)
Step ID 1
Server ABEO-GEIR
Job Name test
Step Name test
Duration 00:00:07
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
Executed as user: abeo-geir
as_jobuser. The package execution failed. The step failed.
Continue: This error is well known for you. It has been mentioned in many postings. Well, how do I go from here. Setting logging on the job results in only this information
PackageStart,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:40,17.10.2006 00:59:40,0,0x,Beginning of package execution.
PackageEnd,ABEO-GEIR,ABEO-GEIR
as_jobuser,Package1,{3F5BD166-D24B-4838-B3F1-018B6C2C7523},{8E1B8E45-7F1D-4C24-852C-2694F993E6D2},17.10.2006 00:59:41,17.10.2006 00:59:41,1,0x,End of package execution.
Well, I read some place that I could run the job as type operating system (cmdexec). Here i could not choose Run as, but had to select SQL SErver agent account. NOw I got this message
Date 17.10.2006 01:05:21
Log Job History (test)
Step ID 0
Server ABEO-GEIR
Job Name test
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. The Job was invoked by User sa. The last step to run was step 1 (test).
As you see, I can't come any further. I NEED HELP FROM YOU. I AM STUCK. I know many of you have solved this and I hope you can guide me through thise. I don't know how many hours or days I have used on this.
Regards
Geir F
View 2 Replies
View Related
Feb 26, 2007
Ray writes "Hi,
I tried to ask the NT admin to login the SQL server and setup a scheduled job to "Shrink the db" for testing purpose.
I tried my ID even I'm not the NT admin, but setup as SQL server as sysadmin, setupadmin, processadmin.
Then the job start and got the error.
[298] SQLServer Error: 15404, Could not obtain information about Windows NT group/user 'DOMAINMYNAME', error code 0x5. [SQLSTATE 42000] (ConnIsLoginSysAdmin)
I have no idea why that happen to NT admin. then I check the Services for SQL Agent under the control panel- admin tools- services.
It shows using the LOCALSYSTEM as login for the SQL Agent service.
Any one have any idea. what security requirement to run a job other than use 'sa' account, since we are using on Windows authenciation mode only.
I must be something is missing? hope some experts here to answer my question.
Thanks!"
View 1 Replies
View Related
Nov 30, 2006
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
View 1 Replies
View Related
Mar 6, 2007
I've tried finding an answer to this on this website but I don't see any. I'm running SQL Enterprise Manager v8.0 and have a job in the SQL server agent folder that won't run as scheduled nor will it run manually if I Right-Click and choose Start Job.
It's designed to run a DTS. I can run the DTS manually without errors but the job won't run it for me. I will try to provide as many details in this post as I can in hopes that someone who is more experienced at this can help me.
DTS DETAILS
The DTS is designed to transfer data from a table on one server and transfer it through a firewall to another server into a table on that server. Then delete the entries from the originating table. This works very well if I run it manually. The purpose of deleting entries from the web server is for security. Once the data in on the other side of the firewall it's safe.
The job however will not run either manually or from it's schedule. I've tried creating a new job and setting up a very simple schedule that runs daily every 2 minutes for example. I've played around with different times but no luck. So I will try and provide you with job details below:
JOB DETAILS
Name: TransferData
Enabled, Target = Local Server
Category: Uncategorized Local
Description: Execute package: TransferData
STEPS
ID: 1
Step Name: TransferData
Type: Operating System Command
On Success: Quit with Success
On Failure: Quit with Failure
PROPERTIES OF STEP
Step Name: TransferData
Type: Operating System Command (CmdExec)
Command: ( I have no idea what this translates to as I did not write it) DTSRun/~Z0xF6EE76ED6259A60AC370F465DE7F3095F4B37F7176C05B8E72E396DEBE60135E53ACFEDB00E1F216DD8EC8206782439BA435771E3C1E8A7A5D0DAE3F3AAA9F48BF08A9A9FA23C010A85573546F6B6B900323F76DC8A27EACAFD63904464DD5A9B28137
Nothing special in the advanced tab
SCHEDULES TAB
ID: 20
Name: TransferData
Enabled: No
Description: Occurs every 1 day(s), every 2 minute(s) between 12:00:00 AM and 11:59:59 PM
and is setup as Recurring
Nothing in Notifications Tab
I only have two SQL books to reference. This is a production fire to put out and I really need the help here as I am not a certified SQL guru.
I hope I have provided enough information here for someone to help. I'm happy to provide an email address for easier contact should you request it.
Thanks in advance for any assistance with this.
View 8 Replies
View Related
Mar 27, 2014
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
View 10 Replies
View Related
Apr 30, 2007
Hi,
I have couple of questions about the scheduler:
I'd like my packages to run only on weekdays and disable a package if one of the first two packages fail. is it possible to do it?
Thanks
Gulden
View 1 Replies
View Related
Aug 5, 2014
I have a simple SSIS package that reads a flat file and copies it into a SQL Server table.
When the flat fiel is on the C drive I have no problem runnign this package from SQL Server Agent, but as soon as I update the path to a network location the package only works when I run it manually, but fails when is executed via the SQL Server agent job.
The error says "cannot open the datafile", while the datafile location is valid.
Is this a kind of limitation of a SQL Server Agent that only local files are allowed to be processed?
View 4 Replies
View Related
