Hi,
I have an FTP task on a package that runs every hour, downloads files from FTP and processes them.
If there are no files, the package should stop successfully after the FTP task, but the problem is that it fails because there are no files.
How can I avoid this?
And another question is there another way to download files and delete then with out another FTP task?
Thanks
Hello,
I have two FTP Tasks configured in my SSIS package. One is for "Receive files" and the other is set for "Delete remote files." Both use variables for the source/destination paths. My remote path variable contains a wild card in the name field such as /usr/this/is/my/path/*.ext and it is working to FTP all the .ext files to my working directory. I then rename the files and want to remove the original files from the FTP server. I use the same variable as the remote path variable in the delete as I do in the receive.
Using the same FTP connection manager for both tasks I am always getting a failure on the delete. The FTP connection manger is setup to use the root user. Using a terminal I am able to open an FTP connection to the server and remove the files manually. There doesn't seem to be any detailed documentation on the FTP Task configured for Delete remote files so I'm hoping someone might have some insight to the problem.
I receive the same message for each of the files that was downloaded:
Error: 0xC001602A at MyPackage, Connection manager "FTP Connection Manager": An error occurred in the requested FTP operation. Detailed error description: 550 usr hisismypathdatafile1.ext: No such file or directory.
The attempt to delete file "usr hisismypathdatafile1.ext" failed. This may occur when the file does not exist, the file name was spelled incorrectly, or you do not have permissions to delete the file.
With the root user/working manually I'm not understanding the permission reason, the file does exist and is spelled correctly.
Dan
Hi,
I have a FTP task in my control flow that download files from a FTP server. This ftp task is inside a foreach container that loops over a ADO recordset for the file name. The files that the ftp task pulls are huge. If the FTP task fails then I want the FTP task to restart and only download those files that have not been downloaded. Is this possible?
What possible configurations do I have to make to the foreach container and the filetask?
Thanks a lot in advance for your help and time.
Regards,
$wapnil
I have developed an SSIS package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
I have developed a SQL Server 2005 Integration Services (SSIS) package that includes a Script Task on a 32-bit machine. The PrecompileScriptIntoBinaryCode property is set to True. After I build the package, the .dtsx file includes a <BinaryItem> element for that Task. Package runs fine on the dev machine, both in BIDS and as SQL Server Agent job.
When I deploy the package to a 64-bit server, it runs fine when I execute the package ad hoc from SQL Server Management Studio. However, when I schedule the package for execution as a SQL Server Agent job, the package fails with the message: "the script files failed to load."
I have reviewed posts on this error from late 2005, but the solutions don't work in this case. Specifically:
1. The Precompile property is already set to True.
2. I have already verified that the script was compiled.
Any further suggestions?
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies View RelatedIn the first step of my SSIS package I need to get files from FTP and dump it/them in a local directory, but it's more than that, the logic is like this:
1. If no file(s) found, stop executing and send email saying no file(s) found;
2. If file(s) found, then compare it/them with existing files in our archive folder; if file(s) already exist in archive folder, stop executing and send email saying file(s) already existed, if file(s) not in archive folder yet, then transfer it/them to the local directory for processing.
I know i have to use a script task to do this and i did some research and found examples for each of the above 2 steps and not both combined, so that's why I need some help here to get the logic incorporated right.
Thanks for the help in advance and i apologize for the long lines of code!
example for step 1:
----------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Imports Microsoft.SqlServer.Dts.Pipeline.Wrapper
Imports Microsoft.SqlServer.Dts.Runtime.Wrapper
Imports Microsoft.VisualBasic.FileIO.FileSystem
Imports System.IO.FileSystemInfo
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Dim cDataFileName As String
Dim cFileType As String
Dim cFileFlgVar As String
WriteVariable("SCFileFlg", False)
WriteVariable("OOFileFlg", False)
WriteVariable("INFileFlg", False)
WriteVariable("IAFileFlg", False)
WriteVariable("RCFileFlg", False)
cDataFileName = ReadVariable("DataFileName").ToString
cFileType = Left(Right(cDataFileName, 4), 2)
cFileFlgVar = cFileType.ToUpper + "FileFlg"
WriteVariable(cFileFlgVar, True)
Dts.TaskResult = Dts.Results.Success
End Sub
Private Sub WriteVariable(ByVal varName As String, ByVal varValue As Object)
Try
Dim vars As Variables
Dts.VariableDispenser.LockForWrite(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
vars(varName).Value = varValue
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
End Sub
Private Function ReadVariable(ByVal varName As String) As Object
Dim result As Object
Try
Dim vars As Variables
Dts.VariableDispenser.LockForRead(varName)
Dts.VariableDispenser.GetVariables(vars)
Try
result = vars(varName).Value
Catch ex As Exception
Throw ex
Finally
vars.Unlock()
End Try
Catch ex As Exception
Throw ex
End Try
Return result
End Function
End Class
example for step 2:
-------------------------------------------------------------------------------------------------------
' Microsoft SQL Server Integration Services Script Task
' Write scripts using Microsoft Visual Basic
' The ScriptMain class is the entry point of the Script Task.
Imports System
Imports System.Data
Imports System.Math
Imports Microsoft.SqlServer.Dts.Runtime
Public Class ScriptMain
' The execution engine calls this method when the task executes.
' To access the object model, use the Dts object. Connections, variables, events,
' and logging features are available as static members of the Dts class.
' Before returning from this method, set the value of Dts.TaskResult to indicate success or failure.
'
' To open Code and Text Editor Help, press F1.
' To open Object Browser, press Ctrl+Alt+J.
Public Sub Main()
Try
'Create the connection to the ftp server
Dim cm As ConnectionManager = Dts.Connections.Add("FTP")
'Set the properties like username & password
cm.Properties("ServerName").SetValue(cm, "ftp.name.com")
cm.Properties("ServerUserName").SetValue(cm, "username")
cm.Properties("ServerPassword").SetValue(cm, "password")
cm.Properties("ServerPort").SetValue(cm, "21")
cm.Properties("Timeout").SetValue(cm, "0") 'The 0 setting will make it not timeout
cm.Properties("ChunkSize").SetValue(cm, "1000") '1000 kb
cm.Properties("Retries").SetValue(cm, "1")
'create the FTP object that sends the files and pass it the connection created above.
Dim ftp As FtpClientConnection = New FtpClientConnection(cm.AcquireConnection(Nothing))
'Connects to the ftp server
ftp.Connect()
'ftp.SetWorkingDirectory("..")
ftp.SetWorkingDirectory("directoryname")
Dim folderNames() As String
Dim fileNames() As String
ftp.GetListing(folderNames, fileNames)
Dim maxname As String = ""
For Each filename As String In fileNames
' whatever operation you need to do to find the correct file...
Next
Dim files(0) As String
files(0) = maxname
ftp.ReceiveFiles(files, "C: emp", True, True)
' Close the ftp connection
ftp.Close()
'Set the filename you retreive for use in data flow
Dts.Variables.Item("FILENAME").Value = maxname
Catch ex As Exception
Dts.TaskResult = Dts.Results.Failure
End Try
Dts.TaskResult = Dts.Results.Success
End Sub
End Class
Is there a way to do this with some sort of task ?
View 7 Replies View RelatedI cannot set a breakpoint in a Script task and have it complete successfully. I am running Vista 32-bit and only the workstation tools for SQL Server 2005 SP2. The steps to recreate are:
1) Create a new SSIS project/package.
2) Add a Script Task.
3) Set a breakpoint in the Script Task.
4) Run the package.
When I remove the breakpoint, the script task succeeds. When I put it back the task fails. The execution results say "Error: The script files failed to load." I completely uninstalled all SQL Server 2005-related entries using the Programs and Features control panel, rebooted, reinstalled the Workstation Tools, then applied a freshly-downloaded SQL Server 2005 SP2 and rebooted. If I change "RecompileScriptIntoBinaryCode" to false the script fails whether there's a breakpoint or not. If it's true (the default), the script only fails when a breakpoint is set. I would like to be able to set a breakpoint to assist in debugging the package. For the time being, I can move the package to a different (non-Vista) OS, where it works fine, but I would like to be able to develop and debug on Vista.
Hi, I was wondering if anybody knows the solution to this problem: I have a DTS package (SQL Server 2000) which is scheduled to pick up and process a TEXT file into the SQL table. The file contains a lot of fields, among them are DUE_DATE and DISC_DATE in such format "MM/DD/YYY" but they are string type in the file. During Transformation Task both fields are being imported into SQL table as DateTime. It happened that today the task failed because the file contained 00 00 0000 and it couldn't convert integer to DateTime. Unfortunatly there is no way to check on correctness of data when file is supplied. Is it possible to do something during transformation task to either remove the record and send email that that record is not being processed or convert bad data to blank string so it can be processed. Not sure if converting is a best practice because i don't know what kind of junk could be entered :)I noticed that actually the problem occurs quite often due to invalid data format supplied in the file. It worries me that the whole process fails when the Transformation fails for the specific record.Please help,Thank you in advance!
Tatyana Hughes
Hi:
I am getting the following error when I start debugging my Package, I am not sure what this is related to, but basically, input (datatype is a int, and its mapped to a column which is also int), so I am not sure whats happening here. The input column is actually a derived column, and its set as a 4 byte un-signed int, please advice on where should I start looking to troubleshoot this issue. This loanapplicationid is actually a user variable that is utilized by other tasks in my control flow as well:
Error: 0xC020901C at InsertApplicationCL5, OLE DB Destination [16]: There was an error with input column "LoanApplicationID" (1161) on input "OLE DB Destination Input" (29). The column status returned was: "The value violated the integrity constraints for the column.".
I've created an SSIS package that retrieves a file from an FTP
View 13 Replies View RelatedHi everyone:
I have a very simple FTP Task that is supposed to grab two files from an ftp server and save them locally on my machine. The problem is that when I test the connection everything works okay (I know that this connection "hides" the password when seen on the Connection Manager Editor, so I re-enter it everytime I want to test the connection). I can see in the Task property that the username and passwords are set, but regardless I always get this error message:
Error: 0xC002918F at Cost Files Transfer, FTP Task: Unable to connect to FTP server using "FTP Bread".
Any idea what could be worng?
Thanks
Idelso
I setup my ExecuteSQL task to have a "Single Row" resultset. The query returns no rows. It fails. I don't think it should but then maybe this is consistent with the lookup transform piping rows down the error output if there is not a lookup value returned.
View 9 Replies View RelatedNow is this a limitation in SSIS or am I missing something. I have an XML file that needs validation. I am using the 'XML Task' control for that. The validation runs fine so long as the file is below a certain size. I am not sure what the cutoff size is but the validation runs fine if the XML file size is 60Mb. I include a few more records in my XML file to make the file size 65Mb and run ETL again and validation fails!
There is not much detail in the error message other than 'Task XML Validation failed'. I dont think there should be any kind of timeout issue. The whole process takes less than a minute before failing.
The issue is definately not with the new records that get added. I have verified the new file with xmlspy and it validates just fine. I have also validated the newly added records (5 Mb) through the same ETL process and that runs fine too.
Please suggest if I should spend time finding what the issue is or simply move on assuming its a known bug? Has any one experienced this?
Thanks,
Sumeet
I have a database that consists of 4 files (1 MDF, 2 NDF's and 1 LDF-file). I can confirm that by running:
select name from sys.database_files
The result is:
Adam_Data
Adam_Log
Adam_FullText
Adam_History
About a year ago this database had 3 more NDF-files, but we moved all the objects that were stored in these secondary datafiles to the other datafiles and removed them completely from the database. This operation worked correctly otherwise the sys.database_files view would have returned more files I assume.
Everything works perfectly with this database until I try to detach and reattach it. If I detach this database and immediately try to attach it again on the same server using Sql Server Management Studio it wants me to attach 7 database files! The 4 database files that are still being used by this database (which is perfectly valid), but it also wants me to attach the 3 old database files which obviously don't exist anymore and that aren't even reported by the sys.database_files view. Is there anything I can do to make sure that an attach of this database will work again? How can I completely remove these old database files?
Regards,
Michael
Has anyone had any trouble moving a package using a OLE DB Connection Manager reading DBASE IV files? While developing I never had a problem, the confiugration string described int his thread (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=76237&SiteID=1) worked just fine. Since I have enabled Configurations, my package will always fail when trying to read the dbf file. I've gone through just about every setting in the config file that I can think of.
Information: 0x4004300A at MyDataFlow, DTS.Pipeline: Validation phase is beginning.
Error: 0xC0202009 at MyPackage, Connection manager "MyDBASEIVConnManager": An OLE DB error has occurred. Error code: 0x80040E21.
An OLE DB record is available. Source: "Microsoft OLE DB Service Components" Hresult: 0x80040E21 Description: "Multiple-step OLE DB operation generated errors. Check each OLE DB status value, if available. No work was done.".
Error: 0xC020801C at MyDataFlow, OLEDBFileSource [15]: The AcquireConnection method call to the connection manager "MyDBASEIVConnManager" failed with error code 0xC0202009.
Error: 0xC0047017 at MyDataFlow, DTS.Pipeline: component "OLEDBFileSource" (15) failed validation and returned error code 0xC020801C.
Error: 0xC004700C at MyDataFlow, DTS.Pipeline: One or more component failed validation.
Error: 0xC0024107 at MyDataFlow: There were errors during task validation.
Hi,
I have a package that has several FTP tasks in sequence:
[ftp task 1]->[ftp task 2]->[ftp task 3]->[ftp task 4]
[Ftp task 4] fails about 20% of the time, for no apparent reason. This is the error message I receive:
[FTP Task] Error: Unable to receive files using "FTP Connection Manager".
The problem is, it works most of the time (80%), but every 4 or 5 tries, it fails. This makes NO sense to me. Is this a bug perhaps?
Please help... should we use an ftp script instead, as the ftp task seems rather unreliable.
Thanks
I have added a package from SQL Server to another package as an "Execute Package Task" it fails with this error:
Error: Error 0xC0014062 while preparing to load the package. The LoadFromSQLServer method has encountered OLE DB error code 0x80040E14 (Only the owner of DTS Package 'nVision_AgentPump' or a member of the sysadmin role may create new versions of it.). The SQL statement that was issued has failed. .
I tried setting the Protection Level to "don't save sensitive", and running the package in process and out. Any idea where to look?
Thanks,
Kayda
I have a package (i.e. child package) which runs itself perfectly fine without displaying any error.
However when I embeded this package inside another package (i.e. parent package) using Execute Package Task. The task always fails. It seems strange enough.
The child package has two variables that need to be passed in from parent package.
Can any expert here please help out? Thanks.
- Steve
I searched the forum's threads on this, and while there were many results, none have helped so far.
I am running a DTS package that is an ACtiveX Script Task using VBScript. The script uses CreateObject() to create a FileSystemObject to copy an .MDB before importing the tables into SQL Server. I want to copy it because of Access' notoriety of corrupting, and this much data being pumped out of Access could force me to Compact & Repair. I would rather do that on a copy.
Function Main()
Dim FSO
Set FSO=CreateObject("Scripting.FileSystemObject")
FSO.CopyFile "\<server><Share>Data.mdb", "\<server>C$DataCopyData.mdb"
Main = DTSTaskExecResult_Success
End Function
The DTS Package runs when I execute it from Ent. Manager, of course. It fails if scheduled, or course :(
I have set the Owner of the Scheduled Task to my domain account, which is also in the Adminstrators Group on the physical server with the SQL Server installation (Windows 2003 Server). I also did the unnecessary task of adding my domain account specifically to the destination folder, which is also Shared.
My sqlagent.exe service runs as SYSTEM on the server, so the SQLAgent should have no problem copying a file from one folder on the server to another.
The Scheduled Task fails with the common error:
DTSRun: Loading...
DTSRun: Executing...
DTSRun OnStart: DTSStep_DTSActiveScriptTask_1
DTSRun OnError: DTSStep_DTSActiveScriptTask_1, Error = -2147220482 (800403FE)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
Error Detail Records:
Error: -2147220482 (800403FE); Provider Error: 0 (0)
Error string: Error Code: 0
Error Source= Microsoft VBScript runtime error
Error Description: Permission denied
Error on Line 12
Error source: Microsoft Data Transformation Services (DTS) Package
Help file: sqldts80.hlp
Help context: 4500
DTSRun OnFinish: DTSStep_DTSActiveScriptTask_1
DTSRun: Package execution complete.
I checked this MS KB Article (http://support.microsoft.com/kb/q298725/), but the instructions after opening DCOMcnfg.exe do not follow what is shown in the WMI window on Windows 2003 Server :rolleyes: (i.e. there is no "Default Security" tab to click.)
I am at a loss here. Thanks for your help.
We are running SQL Server 2012 SP1 64-Bit EE on Windows Server 2008 R2 SP1. I have a SSIS Package which connects to a FTP Site and downloads a file. Then it truncates a table and loads the file data into a table. This package works okay when executed from within VSS and SSMS (In SSISDB, right click on the package and execute). However, when I execute it as a Job it does not run and appears to be failing on the first task which is the FTP Task. SQL job step - Type: SSIS Package; Run as: SQL Server Agent Service Account (domain account called playuser); Authentication: Windows Authentication.In the All Executions Standard Report for the SSISDB Catalog, it only says: FTP Download File: Errors: There were errors during task validation.
Is this because my domain account does not have access to the FTP Site?Is this where I need to come up with a Proxy Account with Credentials?Do I need to set up a SQL Server Login (Proxy Account) with the same username being used in the FTP Batch file?
FTP Commands in a batch file:
username
password
cd omb
asc
get STRMASTER
quit
I have a Execute SQL Task that calls a stored procedure. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. It has a date parameter, but hard coding the date parameter does not work either. I checked the permissions on the Stored Procedure and SQL Agent, which are ok. When I change BypassPrepare to True, the query will execute and insert the rows to the required table. If someone has an explanation for this, I would appreciate some sql enlightenment. Thanks.
Dan
Hey,
I seem somehow stuck in some Script Task problems in SSIS on a x64-environment which has SP2 installed already.
If I'm running the package in 32-bit mode, I'm continuously getting the following error
"Warning: Precompiled script failed to load. Attempting to recompile. For more information, see the Microsoft Knowledge Base article, KB931846 (http://go.microsoft.com/fwlink/?LinkId=81885)."
on one of the package's scripts --
the given links advises to install SP2... what a useless hint.
And if I switch the project to run in Run64BitRuntime=True , another script tasks complains
"ScriptTask_78888010d24c477ea7c8d69f4f5568a5 is not a valid Win32 application. (Exception from HRESULT: 0x800700C1)
-- whatever that might mean...
Maybe I should add that the packages were running in 32-bit mode for the last 12 months now. Without any problems like that.
Those effects are occuring since we put SP2 onto the server...
Any comments on this topic? Similar experiences? Maybe yet some solutions too?
Regards, Frank
I have a SSIS Execute SQL Task that calls a stored procedure with a date parameter. The text of the stored procedure is an "INSERT INTO .. SELECT ..." statement. When I run the text in Query Analyzer, it completes successfully. When I call the Stored Procedure, it executes but does not insert the data. Setting ByPass Prepare to True does not affect the outcome. I also used the query directly in the SQL task itself to no avail. Executing the query in Query Analyzer works. Any assistance would be greatly appreciated.
Dan
Does anyone have any insight to this error:
"Duplicate column name resolution could not be done because the ordinal specified a column of a different name"
I googled it and got one result with no resolution.
I get this error from SQL Server when a task in my dts package fails. My dts package is attempting to update records whose fields have changed based on a specified criteria.
Any help would be greatly appreciated.
TIA,
Jennifer
Scenario:
View 14 Replies View RelatedI have a SSIS package with an FTP task to download a Excel file and populate a table using an excel connection mnager and a SQL Server Destination and it always fails with the following error when scheduled:
The job failed. The Job was invoked by User sa. The last step to run was step 1 (FTP-DM-CRN_ALLOCATION_COMMENTS).
Executed as user: WEB-INTSQLSYSTEM. The package execution failed. The step failed.
The box on which SQL Server is installed is on a workgroup on the domain and the SQL Server is started up by the Local System user on the box.
I am thinking this has to do with windows security based on all the information that I have read on these kind of error messages. Any input on resolving this will be much appreciated.
Thanks,
MShah
Hi,
I have a package in which i have programatically created dataflow task. It used to work fine but now it fails with series of errors out of which one is below
Error 30002: Type 'MainPipe' is not defined. Line 63 Columns 33-40 Line Text: Dim DataFlowTask As MainPipe = CType(DataFlowTaskHost.InnerObject, MainPipe)
It seems all the function and classes referd from following dlls is not working:
Microsoft.SqlServer.DTSRuntimeWrap.dll
Microsoft.SqlServer.DTSPipelineWrap.dll
I say so because i get the following error also:
Error 30652: Reference required to assembly 'Microsoft.SqlServer.DTSRuntimeWrap, Version=9.0.242.0, Culture=neutral, PublicKeyToken=89845dcd8080cc91' containing the type 'Microsoft.SqlServer.Dts.Runtime.Wrapper.IDTSConnectionManager90'. Add one to your project. Line 86 Columns 33-64 Line Text: DtsConvert.ToConnectionManager90(ChildPackage.Connections(""Source"")) These dlls are in GAC and in C:Program FilesMicrosoft SQL Server90SDKAssemblies with same version but still it gives above error.
Thanks
Mohit
1. Created a database with a couple of tables with no data.
2. Taken a full database backup - db.bak.
3. Deleted the database.
4. Restored the database db.bak and filled the tables with some data.
5. Taken log backup - dblog.trn
BACKUP LOG <dbname> to DISK='D:Demodblog.trn' WITH NO_TRUNCATE, INIT
6. Dropped the database again.
7. Restored the database again from db.bak.
8. But when I am trying to restore log file dblog.trn on this database, i keep getting this error :
The log or differential backup cannot be restored because no files are ready to rollforward.
Msg 3013, Level 16, State 1, Line 2 RESTORE LOG is terminating abnormally.
Hello,
I am experiencing an issue with SQL Server 2000 Maintenance Plan.
DB Backup job fails to delete old backup files from the file server (I am backing up to the network share - actually, a DFS).
Backup part of the maintenance plan/job succeeds, but then cleanup part fails.
I made sure that service account under which SQL Server Agent is running, has sufficient privileges over the network share by logging in and successfully deleting files in question.
I was not able to locate any log entries either on the SQL Server machine or on the file server machine that would indicate the root of the problem. Even though I turned on auditing for Delete operations for the destination folder, its subfolders and files, I could not find anything in the Security event log.
I would appreciate any ideas on how to troubleshoot and correct this problem.
Thanks in advance,
Hi All
One of the step in sql agent job is to execute the SSIS package to copy files from remote shared location to local server where sql server is installed. The account on which SQL agent runs as has access to remote shared location. However SSIS package always fails with following error:
An error occurred with the following error message: "Access to the path '\sharedlocationBCKTST105092008.csv' is denied.".
We have tried using proxies but same issue come with proxy also.
When using proxy, we created a proxy for a user who has access on that shared folder on Windows server(from which files are to be copied). If we login to SSIS server with the above user and execute SSIS package manually it works fine. However if we login with different user and run the job via SQL agent using proxy of the above user, then job fails throwing same above mentioned error
Any help is highly appreciated.
Thanks
Hi
We have a problem installing SQL Express Edition SP1 on Vista. The installation stops during installation of setup support files with the following message:
Errors occurred during the installation:Error 2 installing Microsoft SQL Server 2005 Setup Support Files. See log file for more detailed information.Det går inte att hitta filen. (translated: File not found)
The log file points to the support.log file with the following content:
=== Verbose logging started: 2007-03-13 17:34:23 Build type: SHIP UNICODE 4.00.6000.00 Calling process: C:cd nät40..SQLEXPRSetup.exe ===MSI (c) (C4:F4) [17:34:23:450]: Resetting cached policy valuesMSI (c) (C4:F4) [17:34:23:450]: Machine policy value 'Debug' is 0MSI (c) (C4:F4) [17:34:23:450]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (c) (C4:F4) [17:34:23:450]: Client-side and UI is none or basic: Running entire install on the server.MSI (c) (C4:F4) [17:34:23:450]: Grabbed execution mutex.MSI (c) (C4:F4) [17:34:23:591]: Cloaking enabled.MSI (c) (C4:F4) [17:34:23:591]: Attempting to enable all disabled privileges before calling Install on ServerMSI (c) (C4:F4) [17:34:23:607]: Incrementing counter to disable shutdown. Counter after increment: 0MSI (s) (00:10) [17:34:23:622]: Grabbed execution mutex.MSI (s) (00:1C) [17:34:23:622]: Resetting cached policy valuesMSI (s) (00:1C) [17:34:23:622]: Machine policy value 'Debug' is 0MSI (s) (00:1C) [17:34:23:622]: ******* RunEngine: ******* Product: C:cd nät40..SQLEXPRSetupSqlSupport.msi ******* Action: ******* CommandLine: **********MSI (s) (00:1C) [17:34:23:622]: Machine policy value 'DisableUserInstalls' is 0MSI (s) (00:1C) [17:34:23:669]: SRSetRestorePoint skipped for this transaction.MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1402 2: HKEY_CURRENT_USERSoftwareMicrosoftWindowsCurrentVersionPoliciesExplorer 3: 2 MSI (s) (00:1C) [17:34:23:669]: Note: 1: 1324 2: .. 3: 1 MSI (s) (00:1C) [17:34:23:669]: MainEngineThread is returning 2MSI (s) (00:10) [17:34:23:669]: No System Restore sequence number for this installation.MSI (c) (C4:F4) [17:34:23:669]: Decrementing counter to disable shutdown. If counter >= 0, shutdown will be denied. Counter after decrement: -1MSI (c) (C4:F4) [17:34:23:669]: MainEngineThread is returning 2=== Verbose logging stopped: 2007-03-13 17:34:23 ===
The funny thing here is that it works fine when the installer is run from a network share, ie \testserversetupsetup.exe but when the same folder is burned to a CD or copied to a local folder it fails. I have verified that the folders are identical.
I'm not sure what info is required to pinpoint the problem but here are some log files and a screen shot of the message.
Any help or pointers would be greatly appreciated.
Regards,
Martin