Fail To Run As Job But Success Execute In VS2005
Sep 11, 2007
hi all,
please help,
i using Execute DTS 2000 Package Task to create a package.dtsx, and execute successful in VS2005
but when i created it as a job and it fail to run.
the package.dtsx is calling a package2000.dts, which having 2 steps to run.
i execute the job by step, and the i found that the 1st job is running successful but the 2nd job was fail.
may i know where can i found the error log? or any where to debug it?
please help......
thanks 1st.....
View 1 Replies
ADVERTISEMENT
Jun 17, 2015
Exec Prcoess task with source : ftp
destination :ftpunzip
work directory ftpunzip
executable : c:Program FilesWinZip
i am using expressing.
It is doing the unzip but getting this error
package process on server server1 has failed within the Task 'Unzip Files' with the following errors:
>
> File/Process "WZUNZIP.EXE" does not exist in directory "c:Program FilesWinZip".
This is the error message i am getting it
View 6 Replies
View Related
Jun 30, 2006
I have a dts package that is essentially three transformation tasks that creates 3 text files. The transform data is accomplished through an sql query. Before I execute the transform tasks I would like to peform a couple of simple existence checks to verify data: i.e,
if exists (select * from table where week_ending = endoflastweek(getdate())
I could put the statement into the sql (if exists, begin/end) of each of the transformation tasks and prevent the process from executing, but it would be easier to put it into an "execute sql task" and if it succeeds, fail the task or make some kind of declaration not to proceed. I'm not sure how to do this...I know this can be done with an activeX script,
Main = DTSTaskExecResult_Failure
Is there a way to do this in an execute sql task step?
View 1 Replies
View Related
Mar 6, 2008
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
View 5 Replies
View Related
Nov 30, 2006
when I run a package from a command window using dtexec, the job immediately says success.
DTExec: The package execution returned DTSER_SUCCESS (0).
Started: 3:37:41 PM
Finished: 3:37:43 PM
Elapsed: 2.719 seconds
However the Job is still in th agent and the status is executing. The implications of this are not good. Is this how the sql server agent job task is supposed to work by design.
Thanks,
Larry
View 1 Replies
View Related
May 9, 2007
I have a SSIS package that has several Execute SQL Components. One of the first components reurns a Full Result Set of IDs based on a stored procedure call. The stored procedure can return multiple rows. I store the results to an ADO recordset (object variable) to be used later. I want the component to fail, and the package if the return of the stored procedure is zero records. What is the best way to do this? I had a raise error statement if @@rowcount was zero but this did not fail the component. Any other suggestions?
View 5 Replies
View Related
May 29, 2006
Why does the Execute Package Task in SSIS always fail when set to execute in-process?
Having ExecuteOutOfProcess = False always results in that the package fails when run from within BI Studio.
I have also tried it from Command Line using dtexec., same results.
The problem with setting ExecuteOutOfProcess = True all the the time and running from within Bi Studio is that an enourmous amount of processes is created, none of which die because SSIS runs in Debug mode, another problem which is there doesn't seem to be a way to run it in Release mode so as not to get so many Dtexec processes, which ultimately results in having the Server die.
By Dying I mean, thrashing of the CPU & Memory. Page file to extreme limits.
And yes, the hardware should be able to take much more than what SSIS is supposed to eat. Dual 3GHz Xeon & 4GB of Ram.
Thank you.
My kind regards,
Eng. Ahmad Alkilani
View 2 Replies
View Related
Jul 12, 2007
Hi all,
I have an error when a package is trying to execute a SubPackage using the "Execute Package Task". I have this problem for all packages that are running sub packages.
The packages are stored in the DTSPackages folder of the SQL Server installation folder.
The master package is called from an Event Handler on a document library in MOSS 2007.
The account from the Sharepoint Application Pool has Full Control on the DTSPackages folder.
What am I missing ?
View 2 Replies
View Related
Jun 20, 2006
Hi. I am trying to extract the data returned from a store procedure to a flat file. However, it fail to execute this package in the OLE DB Source.
I select the SQL Command in the Data Access Mode, then use:
USE [SecurityMaster]
EXEC [dbo].[smf_ListEquity]
It runs ok in the Preview, but not in the Run. Then the system returns during executing the package:
Error: 0xC02092B4 at Load TickerList, OLE DB Source [510]: A rowset based on the SQL command was not returned by the OLE DB provider.
Error: 0xC004701A at Load TickerList, DTS.Pipeline: component "OLE DB Source" (510) failed the pre-execute phase and returned error code 0xC02092B4.
Please give me some helps. Thanks.
View 13 Replies
View Related
Jun 9, 2006
I am new to this, but have scoured the web and not found an answer to my question...
I have an execute process task that runs a simple batch file. When this batch file completes with an ERRORLEVEL greater than 0, I would like the task to fail. I thought this simply meant setting the "FailTaskIfReturnCodeIsNotSuccessValue" property to true, and setting the SuccessValue to 0. However, this does not appear to work.
Even with a simple batch file forcing the errorcode to 1 as follows, the task still completes "successfully".
SET ERRORLEVEL = 1
Any ideas? Thanks!
View 8 Replies
View Related
Jul 1, 2015
I'm using SSIS in Visual Studio 2012. My Execute SQL Task calls a Stored Procedure where I have a TRY-CATCH. Last week there was a problem and the CATCH was executed and logged an error to my error table, but for some reason the Execute SQL Task didn't fail. Is there a setting to make the Execute SQL Task fail when an SP encounters a failure?
View 3 Replies
View Related
Dec 2, 2005
I have a SQL Task that calls a stored procedure and returns an output parameter. The task fails with error "Value does not fall within the expected range." The Stored Procedure is defined as follows: Create Procedure [dbo].[TestOutputParms] @InParm INT , @OutParm INT OUTPUT as Set @OutParm = @InParm + 5 The task uses an OLEDB connection and has a source type of Direct Input. The SQL Statement is Exec TestOutputParms 7, ? output The parameter mapping is: Variable Name Direction Data Type Parameter Name User::OutParm Output LONG @OutParm
View 7 Replies
View Related
Jul 15, 2004
oK if anyone remembers the problems with my Update/termination Trigger I found it works best if I do it as a Stored procedure instead of a trigger. Thanks again for your help guys. I really appreciate it
View 3 Replies
View Related
Apr 9, 2002
Hi:
I create a DTS package in 'Copy SQL Objects Task' to transfer 3 stored procedures from my local SQL msdb to remote testing msdb database.
Execution is 'successful' but the destination server msdb does not have the 3 stored procedures.
Any hint on this 'vanished' copy objects?
thanks
-D
View 2 Replies
View Related
Feb 13, 2004
Just a thought.
If an issue is resolved please note that the problem has been resolved. Because there are "many ways to skin a cat" it would be helpful to anyone else with a similar problem (or someone trying to learn) what the solution was.
View 7 Replies
View Related
Oct 11, 2006
Hi expert,
I use a SQL Job that makes use of the BACKUP command. How can I check this job success or not?
Thanks
View 5 Replies
View Related
Jun 19, 2007
Hey all
Which system variable do I use if I would like to transfer success message into an SQL table? I'm running a task to import data into an SQL table. And I'm using the System::ErrorDescription variable (Execute SQL task) to insert error messages into a table but I would really appreciate it if someone could tell me what system variable would insert 'success' message into an SQL table. Tried a lot of searching on the net but couldn't find anything.
Many thanks,
Rupa
View 1 Replies
View Related
Oct 19, 2007
Has anyone here been involved in a successful commercial Data Warehouse project?
If so, what was your role? How big was the project? Did you do it all or was their one guy data modelling, one for ETL, one for Client-side, one project managing, etc...? What tools did you use? Was it in SQL2000? 2005? Did you use DTS/SSIS for your ETL or Sprocs? Did you use SSAS? Were you writing lots of MDX to meet client-side needs? Or did you use a completely different toolset for all or some of this?
Did you use the Kimball approach? Or were you in the other camp?
Was your latency nightly or did you have some type of "real-time" capability?
I would prefer to hear from people who've actually been involved in successful projects (or failed projects if you would like to share with us why you think they failed). I'm not too interested in hearing from people that have never done it but have a theory as to how it should work (like me).
Many Thanks,
Coolerbob
(Or is there some other website forum I should be asking this question on? (like mdxteam, olapteam, datawarehouseteam or something)
View 3 Replies
View Related
Jul 17, 2001
Is there a parameter allowing to verify successful execution of a stored procedure?
Something that can be run as the last line in a stored procedure to verify its success...?
Thanks!
View 1 Replies
View Related
Feb 28, 2001
Hi Guys, basically I have a scheduled job in MSSQL7, which on completion e-mails one of the operators.....
How can I get this job to email more than one operator upon completion???
Cheers....
View 1 Replies
View Related
May 11, 2006
Trying to delete records associated with the same contact id from all the tables used for that contact. But I'm getting an error. Strange error because the table does exist and I've been able to do single deletes from that table. So, something tells me I'm not getting something right in my SQL statement. How do I delete records from all 3 tables using the same id (as opposed to doing 3 different SQL calls, one for each)?
-----------------
DELETE names, addresses, phones
FROM names AS n, addresses AS a, phones AS p
WHERE n.id = '12' AND a.id = '12' AND p.id = '12'
Error: Unknown table 'names' in MULTI DELETE
-----------------
(BTW, how do tag my code so it shows up in a code div?)
View 1 Replies
View Related
May 10, 2007
I apologize in advance for what is probably a really dumb question.
I have an SSIS package that is executing a number of data flow tasks simultaneously, and then all are followed by a single script step. I'm trying to get all the constraint arrows to look uniform by having them exit the DFTs on the right side and enter the script step on the left. Unfortunately, BI Dev Studio is putting the exiting arrows on the bottom, which looks awful and is difficult to follow. I can only move them between specific points on the bottom of the step. How do I move those arrows to the right side?
Thanks in advance.
View 8 Replies
View Related
Dec 2, 2015
How to use Xquery to get the success value and the result value from the following XML.
This XML is stored in a SQL Table XML field, i want to be able to get all the success and reslut values for all the records:
Here is my XML
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:ns1="https://data.abc.biz/mysoappathtest/?soap:customcalls:v1"
xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
xmlns:SOAP-ENC="http://schemas.xmlsoap.org/soap/encoding/" SOAP-ENV:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
<SOAP-ENV:Body>
[Code] ....
I am trying to get the result = 15810 and the Success value = true
View 3 Replies
View Related
Oct 23, 2006
My ssis package errors out because one of the database connection failed. I successfully logged error but also indicated that package finished successfully. My confusion is if a sheduling software schedules this package, what would be return code sent by dtexe... . would it be success or failure? In this scnerio i want it to return failure so that appropriate team can be contacted.
thanks,
kushpaw
View 1 Replies
View Related
Apr 29, 2008
Hello again to everyone,
Because of aleatory problems some of our Analysis Services Tasks fails and sometimes success with not know reasons. You run the task and it fails, the next time it fails, the next time is success, and so on aleatorily.
The solution of this is to put those tasks in a loop (ore someting similar) that only ends if all of the Analysis Services Tasks succeeds. If not, those tasks starts again. Do you know what I mean? How can I build this? I have investigated with checkpoints, with For Loops ... but still I dont find the way to do it.
Does anybody can help me? I suppose it's not so difficult, but I'm stuck in finding the solution...
Thankx once again.
JohnSSIS
View 3 Replies
View Related
Jun 28, 2006
I have an ActiveX Script Task in SQL Server 2000. It chooses one of two
possible success-paths depending on if a file exist or not. (Part of the old ActiveX Script for choosing next step is below)
I need to rewrite this for a Script Task in SQL Server 2005 but it seems like it
doesn't have this functionality and objects.
Does anyone know how to write the code for choosing the next step in a
Script Task or knows another way to solve my problem?
The package is not suppose to fail if the file is missing, it's must succeed and that's why I need two success-paths.
Regards,
Sara
'**********************************************************************
' Visual Basic ActiveX Script
'************************************************************************
Function Main ()
Dim pkg
Dim stpContinuePkg
Dim stpExit
SET pkg = DTSGlobalVariables.Parent
SET stpContinuePkg = pkg.Steps("DTSStep_DTSActiveScriptTask_4")
SET stpExit = pkg.Steps("DTSStep_DTSActiveScriptTask_21")
If ...... Then
Main = DTSStepScriptResult_ExecuteTask
stpContinuePkg.DisableStep = False
stpExit.DisableStep = True
Else
.......
End If
Main = DTSTaskExecResult_Success
End Function
View 3 Replies
View Related
May 29, 2003
I export all tables from serverA databaseAA to serverB (both SQL2k sp3)databaseAA with 'Success', but without any relationships. In SQL6.5 Tools of Transfer will bring all objects include relationship.
I also tried export "All Objects" which fails with unclear message. I just don't want to do a backup and restore....
thanks
David
View 9 Replies
View Related
Jan 25, 2006
Hi
I am writing a package that i want to have email me on two possible success scenarios.
essentially, this is the conditions:
IF @result = 0
BEGIN
EXEC master..xp_cmdshell @copyfile, NO_OUTPUT
PRINT 'Operation Successful'
END
ELSE
BEGIN
RAISERROR ('This operation failed. Error Code:01. The source and destination files are identical.', 0, 1)
END
If the first condition is met, I want to fire off an email stating success.
If the second condition is met (the RAISERROR) then i want to fire off a different email.
Now, the problem is, I am not sure how to flow it. Both conditions are successful, thus it always fires off the success email if i use an "On Success" flow.
How do i capture the RAISERROR before the email to tell it which email to send?
Does this make sense?
View 1 Replies
View Related
Jan 25, 2006
Hi
I am writing a package that i want to have email me on two possible success scenarios.
essentially, this is the conditions:
IF @result = 0
BEGIN
EXEC master..xp_cmdshell @copyfile, NO_OUTPUT
PRINT 'Operation Successful'
END
ELSE
BEGIN
RAISERROR ('This operation failed. Error Code:01. The source and destination files are identical.', 0, 1)
END
If the first condition is met, I want to fire off an email stating success.
If the second condition is met (the RAISERROR) then i want to fire off a different email.
Now, the problem is, I am not sure how to flow it. Both conditions are successful, thus it always fires off the success email if i use an "On Success" flow.
How do i capture the RAISERROR before the email to tell it which email to send?
Does this make sense?
View 1 Replies
View Related
Nov 7, 2001
I recently upgrade my Enterprise Manager to Sql 2000 from 7.0; the databases are still SQL 7.0. Since then I've noticed that all scheduled jobs that are calling dtsrun.exe's are reporting successful but do not actually run. I think the total process time is 1 sec.The message from View History reports: "The step did not generate any output. Process Exit Code 0. The step succeeded." Every job that uses the dtsrun.exe reports the same message. I've ran the same command from DOS and it runs fine. I've executed some basic batch commands within the Scheduled Jobs and those fail as well. I can open the DTS package and execute those with success, but when these are scheduled and are executed from the Agent Jobs they fail. Can anyone shed some light on this please?
Thanks,
Jeff
View 1 Replies
View Related
Jun 29, 2006
Hi all,
I have a stored proc that uses xp_cmdshell to boot off a batch file on the NT side of the box (box OS is Windows 2000 Advanced Server).
Here is the pertinent code:/*----- Kick off the NT bat job to suck over the data through the web service pipe*/
SELECT @NTCommand = 'D:TradeAnalysisWondaDataStoreJobsPullFromWONDA _InstitutionalRankings.bat ' + CONVERT(varchar(10), @ReqDate, 101)
EXECUTE @e_error = master.dbo.xp_cmdshell @NTCommand
SELECT @m_error = CASE WHEN ISNULL(@e_error, 0) <> 0 THEN (@e_error + 50000) ELSE @@Error END
IF @m_error <> 0 GOTO ErrorHandlerThe trouble is that the batch file is failing (soft error, caught internally to the batch file, which then kills itself, screaming loudly all the way).
The batch file is using the following "voice" in which to scream in pain as it dies (a.k.a., using this code to terminate itself, which kills the cmd shell and returns 13 as an error code)REM WonDBService.exe says we failed
Date /T
Time /T
EXIT /B 13
Meanwhile, back at the ranch (errr...back in stored procedure), what is being returned is a ZERO (in the first code block, @e_error is being set to ZERO when the xp_cmdshell returns from the bat file.
So, now that I have ruled out the obvious *LOL* how can I get my xp_cmdshell to realize it has failed miserably at the one, tiny, simple, not-too-much-to-ask, job that it is designed to do?
View 2 Replies
View Related
Nov 23, 2007
Is there some example of how i can add a return status into my stored procedure to have an extra field where I can verify if it runs successfully
1 if success
-1 if error (server, etc)
0 if empty record return
Thanks
View 2 Replies
View Related
May 22, 2008
I have an ssis package with three tasks. I want to force the execution result of the package to success all the time. I execute the package from a .net application. I tried to place my tasks in the package inside a sequence container and created a new script task which would execute when the any of the tasks in the container failed. I am setting the result of the package to success in this script task. This is not correctly working for me. Even if one task in the package failed and the last script task went to success, the .net app is receiving a failure status. Is there any way to handle this in the ssis package than in the .net app. There might be an easy way, but I am unable to find it.
Thanks in advance!!
View 4 Replies
View Related
