I've built SSIS package and made a job to execute it automatically but it always returns an error. The job returns OK but when we looked at the Log File viewer, it conatins this error log :
Key not valid for use in specified state
Failed to decrypt protected XML node "DTS Password" with error
What's wrong with the package ? Thanks in advance.
My object is a database on a single machine to start with . i am running xp home
i am a complete newbie to this, so please bear with me.
i have vb 2005 express edition running on my machine. i then downloaded sqlexpress_adv adition and tried to install.
It checks the prerequisites "the required components were installed successfully"
goes to sql server install wizard , checks the sytem configuration , 15 success , 1
failure.
message = iis feature requirement warning. it says install via control panel / add /remove etc . ???????? it is not in the list of programs.
can i still carry on with the installation?. ( i did)
It gets to feature selection.The database services is marked. (hit next)
Instance name comes up . Default is ticked named instance "sqlexpress". (hit next)
It then says existing compomponents have been found. Select upgarde options below. I ticked sql server database services 9.00.1399.06. (details gives allowed upgrade)
(hit next)
windows authentication mode checked (hit next)
validating settings
then msbox != "the sql server failed to start, see books on line and log etc"
i goto the log
2007-03-08 11:08:54.62 spid5s Starting up database 'master'. 2007-03-08 11:08:54.73 spid5s WARNING: did not see LOP_CKPT_END. 2007-03-08 11:08:54.73 spid5s Error: 3414, Severity: 21, State: 2. 2007-03-08 11:08:54.73 spid5s An error occurred during recovery, preventing the database 'master' (database ID 1) from restarting. Diagnose the recovery errors and fix them, or restore from a known good backup. If errors are not corrected or expected, contact Technical Support. 2007-03-08 11:08:54.73 spid5s Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup, repair it, or rebuild it. For more information about how to rebuild the master database, see SQL Server Books Online.
We installed the SQL Server 2005 Developer edition on one of our test server after uninstalling the beta version. Also, we had to rename an entry in the registry to get the install (all components) to work. When I tried to start Integration Services (all the other servers started OK), I get the following error in the Event log.
Hello! I created SQLServer account which suppose to launch MSSQLServer and SQL mail serveces. But when I try to stop and then run SQL Server through Command promt I see error message: " Starting SQL Mail session.... Error: 17903, Severity:18, state:1 MAPI login failure Error: 17951, Severity:18, state:1 Failed to start SQL MAil session" Please save my life. If you have any idea what I have to do to fix up problem let me know.
I am getting the following errors in the NT Event Log on a system using SQL 6.5 SP3 on an NT 4.0 SP3 machine (with selected hotfixes). Perhaps someone here will have experienced this problem. Any suggestions are appreciated.
Service Control Manager - Event ID 7009 Timeout (120000 milliseconds) waiting for service to connect.
Service Control Manager - Event ID 7000 The SQLExecutive service failed to start due to the following error: The service did not respond to the start or control request in a timely fashion.
Thanks,
Matt Combs Product Development Engineer Eaton Corporation - TISD Clemmons, NC
I had installed SQL express yesterday, and it did function, but due some other problems, i uninstalled it, and reinstalled SQL express 2005. Appearantly, there is some rest of the old installation, blocking me to start a new installation.
The link provided by the program (below) does not connect to any page. I would appreciate some help, thanks in advance.
Regards,
Ruud
TITLE: Microsoft SQL Server 2005 Setup ------------------------------ The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." For help, click: http://go.microsoft.com/fwlink?LinkID=20476&ProdName=Microsoft+SQL+Server&ProdVer=9.00.3042.00&EvtSrc=setup.rll&EvtID=29503&EvtType=sqlsetuplib%5cservice.cpp%40Do_sqlShutDownRANUInstance%40sqls%3a%3aService%3a%3aStart%40x3 ------------------------------ BUTTONS: &Retry Cancel ------------------------------
I'm newbe with SQL Server , I'm looking for help with sql server express edition 2005. At the end of installation ocurrs an error:
The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually. Error Number : 29503 . (Summary file) Rest of components has status : Successfully installed
I've go installed .Net Framework 2.0, I'm using XP with SP2 , no anty-virus software during instalatin is activated, the XP firewall is off during instalation.All system check requirements are passed successufully (running on Athlon64)
No additional software bound with SQL is installed.(in add/remove programs there is nothing additional connected with sql)
I've re-installed it few times with some other options (network , local) ,different installation path ,but allways the same result - fail. I've tried to find help in few similar posts but that didn't help.Mayby i've miss somethin'
I have mentioned this problem before but it has not been resolved. I am installing MS SQL Server Express Advanced i.e. using SQLEXPR_ADV.EXE.
During the initial checks, i get a warning about hardware requirements and I have read the posts about the install failing if the CPU does not support prefetching but I am running a P4 3.0GHz (twin core) CPU with 512MB RAM on Windows XP Pro SP2.
The installation fails at SQL Server Database Services during "Configuring Microsoft SQL Server":
"Starting SQL Service: MSSQL$SQLEXPRESS"
If I click the Retry button, the system goes away and then comes back with the same message. If I click cancel, various roll-back actions are performed and the install fails
Is this the default name for the SQL Server instance ? I thought it would be named after my machine name i.e. GLKD239680SQLExpress ?
Any ideas anyone ? I have not had much luck with installing this despite 2 PC rebuilds and scanning the forums for solutions.... I can post any log files if needed
when i right click and execute the package from the Management Studio, it runs fine, everytime. When i schedule a job to execute it, it fails, everytime.
"The package execution failed. The step failed."
i have made sure that the package and job ran using credentials with more than enough access to everything. Still, with no luck. PLEASE! I am at my wits ends here, and the boss is getting antsey...
hi all, i am using SQL Server 7.0 . After changing the machine name the sqlserver is not starting. if i changed the machine name to the old name the server starts as usual. is there a solution for this problem. where can i change the machine name in the sql server configuration. so as to start it correctly... thanks... jinujose
Hi all, I'm new to SSRS. I installed reporting services with my other services in SQL Server 2005. When I started Reporting Service Configuration tool,I see that my Reporting Server Status Stopped. When i am trying to start the service, i get the following error(exception)....also attached are the logfiles....
EXCEPTION DETAILS: System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
LOGFILE1: ----------------------- ------------------------------ ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Sql error:System.Data.SqlClient.SqlException: Could not find stored procedure 'GetDBVersion'. at System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) at System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, Boolean async) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, DbAsyncResult result) at System.Data.SqlClient.SqlCommand.InternalExecuteNonQuery(DbAsyncResult result, String methodName, Boolean sendToPipe) at System.Data.SqlClient.SqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.InstrumentedSqlCommand.ExecuteNonQuery() at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() ReportingServicesService!library!8!3/6/2008-20:26:48:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. ReportingServicesService!library!8!3/6/2008-20:26:48:: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.InvalidReportServerDatabaseException: The version of the report server database is either in a format that is not valid, or it cannot be read. The found version is 'Unknown'. The expected version is 'C.0.8.40'. To continue, update the version of the report server database and verify access rights. at Microsoft.ReportingServices.Library.ConnectionManager.EnsureCorrectDBVersion() at Microsoft.ReportingServices.Library.ConnectionManager.ConnectStorage() at Microsoft.ReportingServices.Library.ServiceController.ServiceStartThread() ReportingServicesService!library!8!3/6/2008-20:26:48:: Attempting to start service again...
LOGFILE2: ------------ -------------------- ReportingServicesService!library!4!3/6/2008-20:26:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized., ; Info: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized. ReportingServicesService!servicecontroller!9!3/6/2008-20:26:47:: Total Physical memory: 1063641088 ReportingServicesService!servicecontroller!4!3/6/2008-20:26:47:: e ERROR: Exception caught starting RPC server: Microsoft.ReportingServices.Diagnostics.Utilities.UnknownUserNameException: The user or group name 'MACHINE_NAMEASPNET' is not recognized. at Microsoft.ReportingServices.Library.Native.NameToSid(String name) at Microsoft.ReportingServices.Library.ServiceAppDomainController.StartRPCServer(Boolean firstTime)
I had a strange experience with MS SQL Server 2005 Express Edition installation, I am running a P4 3G Processor, 1 GB of RAM, Windows XP SP2, 300 GB HDD (SATA if it matters at all :) ) And using Visual Studio Pro 2005.
I have managed to install the SQL Express with no hassle at all, then had to format my HDD, and start from scratch, to make a new home for my VS 2005 Pro (The 300 GB HDD) And managed to install the SQL Express as part of the VS 2005 without any problems, after using it for 3 months now, I've started a new project in VS 2005, and tried to add a new SQL DB, but it had failed for several times.
I€™ve decided that the files got corrupted for some reason and tried to reinstall the MS SQL 2005 using the original SQL Express installation file I've used before, but without joy.
I thought that it is conflicting with some new MS Update patch and downloaded the latest SQL Express advanced installation, but that did not fix the problem either.
The message I'm getting every time I attempt the installation is" SQL Server service failed to start" with all the bla bla about the online books and whatever useless stuff to learn how to start the service manually.
I have uninstalled the whole thing, including VS 2005, .NET Framework, and any registry trace of the SQL Server installation, but again all in vain.
Finally, some smart wizard suggested in one of the threads that if your computer is not part of a domain, you should run the SQL service as a local service, using the advanced option during the first step of the setup.
And guess what! It worked!!!! My Question is why did it work during the first two installations, without me fiddling with the advanced installation feature? My computer was and still is, not part of any domain, my hardware did not change at all, and I had the installation failing with or without any software installed!
I am receiving an error on my master package that executes a number of other packages. The individual packages work fine when executed by themselves. However, I am getting the following error when I attempt to execute it from another package:
Error: Failed to acquire connection "conneciton". Connection may not be configured correctly or you may not have the right permissions on this connection.
I cannot understand why I cannot get my sql mail to work properly. It was working fine a couple of days ago. My mail profile is setup using Outlook. The only problem is that when I go to services and check the Mssqlserver & sqlserveragent, they are now logging in as the system account, but when I attempt to change them to the administrator account it says error 1057 occured: the account name is invalid or does not exist, yet it does. Anyone have any idea how to rectify this? this is what is on the error log:Error: 17919, Severity: 18, State: 1 2001-06-05 14:09:16.33 ods Invalid session.. 2001-06-05 14:09:16.34 ods Error: 17951, Severity: 18, State: 1 2001-06-05 14:09:16.34 ods Failed to start SQL Mail session..
I am attempting to create a new trace but I get the following error message: "failed to start a new trace".
I have been doing some digging and as I understand it, I had to find the directory Profiler uses for temporary files. So, I typed the following in the command window "SET TMP" and I received the following reply:
C:UsersRossAppDataLocalTemp
Now, according to the forum: [URL] ...
I am supposed to check that the system folder pointed to by the TMP environment variable exists and is not crammed with files.
Well, when I went to the directory C:UsersRossAppDataLocalTemp, it is indeed full of both files and directories. The size is 16.3 MB and has 133 files and 63 folders.
When I had a look at the Environment Variables window and chose TMP the value is "%USERPROFILE%AppDataLocalTemp" which according to my limited understanding is the equivalent to C:UsersRossAppDataLocalTemp.
So, what I am wondering is am I supposed to totally clear out this directory? I am not too keen on doing this because I don't want to stuff my PC up.
I tried to apply the SP2 on a newly installed SQL Server 2005 Developer edition. The installation failed and the MSSQLSERVER service does not start. I work on 32 bits Windows Server 2003 Standard Edition SP1 with all the patches up to date. I downloaded SQL Server 2005 SP2 on March 15, 2007.
Here are the error messages from 2 of the log files:
Summary.txt:
Product : Database Services (MSSQLSERVER) Product Version (Previous): 1399 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29534 Error Description : MSP Error: 29534 Service 'MSSQLSERVER' could not be started. Verify that you have sufficient privileges to start system services. The error code is (-2146885628) Cannot find object or property.
SQL9_Hotfix_KB921896_sqlrun_sql.msp.log:
Doing Action: ComponentUpgradeInstall PerfTime Start: ComponentUpgradeInstall : Sun Mar 18 17:37:33 2007 <Func Name='ComponentUpgradeInstall'> <Func Name='ComponentUpgrade'> Failed to add file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG' to datastore in AddFileToFailureHandling Service MSSQLSERVER with parameters '-r' is being started at Sun Mar 18 17:37:33 2007 Failed to start service MSSQLSERVER. Error code 2148081668 Service failed unexpectedly (2148081668) Error Code: -2146885628 Windows Error Text: Cannot find object or property. Source File Name: sqlsetuplibservice.cpp Compiler Timestamp: Wed Jun 14 16:29:04 2006 Function Name: sqls::Service::Start Source Line Number: 301
And below you can see the content of the SQL error log:
2007-03-18 19:46:11.51 Server Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Feb 9 2007 22:47:07 Copyright (c) 1988-2005 Microsoft Corporation Developer Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
2007-03-18 19:46:11.51 Server (c) 2005 Microsoft Corporation. 2007-03-18 19:46:11.51 Server All rights reserved. 2007-03-18 19:46:11.53 Server Server process ID is 796. 2007-03-18 19:46:11.53 Server Authentication mode is WINDOWS-ONLY. 2007-03-18 19:46:11.53 Server Logging SQL Server messages in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG'. 2007-03-18 19:46:11.53 Server This instance of SQL Server last reported using a process ID of 712 at 3/18/2007 5:39:48 PM (local) 3/18/2007 3:39:48 PM (UTC). This is an informational message only; no user action is required. 2007-03-18 19:46:11.53 Server Registry startup parameters: 2007-03-18 19:46:11.53 Server -d C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmaster.mdf 2007-03-18 19:46:11.53 Server -e C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG 2007-03-18 19:46:11.53 Server -l C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmastlog.ldf 2007-03-18 19:46:11.56 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required. 2007-03-18 19:46:11.56 Server Detected 2 CPUs. This is an informational message; no user action is required. 2007-03-18 19:46:11.87 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required. 2007-03-18 19:46:11.98 Server Attempting to initialize Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Attempting to recover in-doubt distributed transactions involving Microsoft Distributed Transaction Coordinator (MS DTC). This is an informational message only. No user action is required. 2007-03-18 19:46:14.06 Server Database mirroring has been enabled on this instance of SQL Server. 2007-03-18 19:46:14.07 spid5s Starting up database 'master'. 2007-03-18 19:46:14.15 spid5s 1 transactions rolled forward in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s 0 transactions rolled back in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.17 spid5s Recovery is writing a checkpoint in database 'master' (1). This is an informational message only. No user action is required. 2007-03-18 19:46:14.37 spid5s SQL Trace ID 1 was started by login "sa". 2007-03-18 19:46:14.42 spid5s Starting up database 'mssqlsystemresource'. 2007-03-18 19:46:14.50 spid5s The resource database build version is 9.00.3042. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid5s Server name is 'YODA'. This is an informational message only. No user action is required. 2007-03-18 19:46:14.89 spid9s Starting up database 'model'. 2007-03-18 19:46:15.06 spid9s Clearing tempdb database. 2007-03-18 19:46:15.67 spid9s Starting up database 'tempdb'. 2007-03-18 19:46:15.79 spid12s The Service Broker protocol transport is disabled or not configured. 2007-03-18 19:46:15.79 spid12s The Database Mirroring protocol transport is disabled or not configured. 2007-03-18 19:46:15.82 spid12s Service Broker manager has started. 2007-03-18 19:46:21.62 Server The server could not load the certificate it needs to initiate an SSL connection. It returned the following error: 0x8009030d. Check certificates to make sure they are valid. 2007-03-18 19:46:21.62 Server Error: 17190, Severity: 16, State: 1. 2007-03-18 19:46:21.62 Server FallBack certificate initialization failed with error code: 1. 2007-03-18 19:46:21.62 Server Unable to initialize SSL encryption because a valid certificate could not be found, and it is not possible to create a self-signed certificate. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x80. 2007-03-18 19:46:21.64 Server Error: 17182, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server TDSSNIClient initialization failed with error 0x80092004, status code 0x1. 2007-03-18 19:46:21.64 Server Error: 17826, Severity: 18, State: 3. 2007-03-18 19:46:21.64 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log. 2007-03-18 19:46:21.64 Server Error: 17120, Severity: 16, State: 1. 2007-03-18 19:46:21.64 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
System.ServiceProcess.TimeoutException: Time out has expired and the operation has not been completed. at System.ServiceProcess.ServiceController.WaitForStatus(ServiceControllerStatus desiredStatus, TimeSpan timeout) at ReportServicesConfigUI.Panels.ServerInformationPanel.StartStopServiceTask(Boolean start)
i get the above error when attepting to install reporting services
Ran the SP2 locally on a Windows Server 2003 SP1 box that had SQL Server 2005 SP1 install on it. Problem was I ran out of C: drive and it failed in the middle of upgrading the server.
I'm unable to start the SQL Server at all now. Is there any way to back this out? Don't think I can reapply any patches since the service is dead.
Eventlog now shows: One or more files do not match the primary file of the database. If you are attempting to attach a database, retry the operation with the correct files. If this is an existing database, the file may be corrupted and should be restored from a backup.
The log shows it's unable to start SQL (blames it on permisions but it's because SQL can no longer start)
Product : Database Services (MSSQLSERVER) Product Version (Previous): 2047 Product Version (Final) : Status : Failure Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGHotfixSQL9_Hotfix_KB921896_sqlrun_sql.msp.log Error Number : 29538 Error Description : MSP Error: 29538 SQL Server Setup did not have the administrator permissions required to rename a file: C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDATAmssqlsystemresource1.mdf. To continue, verify that the file exists, and either grant administrator permissions to the account currently running Setup or log in with an administrator account. Then run SQL Server Setup again.
I'm guessing its reinstall time but not sure how the attached databases will like that idea.
I'm trying to install SQL 2005 onto a 2012 R2 server. The install is failing at the end when it is trying to start the database service. I have looked in the install logs and I'm getting the following error. I'm running 8 virtual processors on the virtual machine (8 Cores). URL...
Error 29503. The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually."The error is (1067) The process terminated unexpectedly.       <Failure Type='Fatal' Error='1067'>    <EndFunc Name='LaunchFunction' Return='1067' GetLastError='203'>    CustomAction Do_sqlScript.3EA9D9BF_D9D2_4023_B2A7_9E2137B2FB1B returned actual error code 1603 (note this may not be 100% accurate if translation happened inside sandbox)    05/18/2015 14:56:41.705 [4924]: Assembly Install: Failing with hr=80070005 at RemoveDirectoryAndChildren, line 396    [code]...
I faced the problem trying to adjust ssl encryption in ms sql server 2005. I've completed all steps from this article: http://msdn2.microsoft.com/en-us/library/ms191192.aspx
But when I'm trying to restart sql server - it fails to start.
Here the error messages I got:
1. Unable to load user-specified certificate. The server will not accept a connection. You should verify that the certificate is correctly installed. See "Configuring Certificate for Use by SSL" in Books Online.
2. TDSSNIClient initialization failed with error 0x80092004, status code 0x80.
3. TDSSNIClient initialization failed with error 0x80092004, status code 0x1.
4. Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
5. SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
SQL Server is installed on Windows 2003 Server OS running computer.
I use certificate created by means stand-alone Certificate Authority that appeared in Administration Tools on that computer after I installed Certificate Services.
I guess the reason is in wrong certificate parameters I set while requesting.
How can I determine correct certificate parameters? Does anyone know?
while failover from one node to another node in cluster environment. cluster node is moving to another node but my SQL server services are not started.in event viewer i am getting bellow errorr event id 19019
Hello, I've configured SQL Server 2000 for merge replication and am trying to start the snapshot agent for the publication and after about 20 minutes of it trying to start, it gives up with this error.
Server execution failed
There is no more information in the event viewer. I've tried it with a bunch of different subscriptions. SQL Server and SQL Agent are running under a local account which has access to the replcation data directory. SQL Agent is running.
Is there a trick to getting this installed correctly? Everything works great until it gets up to starting the service. Here is the complete section of my setup log file.
SQL 2005 Standard.
Machine : KINGSERVER550 Product : SQL Server Database Services Error : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." -------------------------------------------------------------------------------- Machine : KINGSERVER550 Product : Microsoft SQL Server 2005 Product Version : 9.00.1399.06 Install : Failed Log File : C:Program FilesMicrosoft SQL Server90Setup BootstrapLOGFilesSQLSetup0003_KINGSERVER550_SQL.log Last Action : InstallFinalize Error String : The SQL Server service failed to start. For more information, see the SQL Server Books Online topics, "How to: View SQL Server 2005 Setup Log Files" and "Starting SQL Server Manually." The error is (1067) The process terminated unexpectedly. Error Number : 29503
I searched a previous thread dealing with this error, but seems like nobody has found a solution.
When I am trying to install SQL Enterprise edition, in Server 2003 OS. while installing only it shows an error.
SQL Server Failed to start. For more information, see the SQL server books Online topics, "How to view SQL Server 2005 setup Log files" and "starting SQL server manually".
I have a SSIS package which copies data from Excel file to the database. As soon as the file is copied to a specific location on the file system I insert an entry in the database table, which should kick off the above mentioned SSIS package.
I tried to read on WMI Event Watcher Task to do the above thing. I am not sure that I can do something like that.
I truncate some tables before refreshing the data and that is one of the last steps shown in the package execution progress window when watching the package run.
Both in Visual Studio and when I use the Execute package utility once I have put the package on the server?
Is there a problem with having multiple truncate statements in one execute T-SQL statement task?
I have a Stored Procedure preparing data, which then are exported (flat files) using 2 SSIS packages. What is the best way to execute those 2 SSIS packages (sp,job, other) ?
I expect to create a trigger to post updated data from GoldMine hosted in MS-SQL to my migration MS-SQL database in the appropriate tables mirroring the destination PICK data tables.
Then, start an ActiveX DTS package to migrate the data via a PICK DSN to data tables in a PICK database.
Currently the dba has been able to use VB6.0 with ADO to push data into PICK. He also was able to do similar using MS-Access.
However, PICK (RainingData) is of the opinion that he must script a PICK server side Basic (RealBasic) insert script to receive the data from a VB6.0 application triggered by MS-SQL.
I think that I could skip the Basic script and go direct with ADO in DTS as he has before with VB6.0 with a user form.
Can I have the trigger start the DTS or should I just schedule it to run as often as necessary to update the PICK database?
FYI, this is a one-way data flow into PICK.
TIA
Anyone within the L.A. CA area that has experience with PICK and MS-SQL can get some well paid consulting hours. I'm just the GoldMine GMT whose been enlisted to get the job done, but would appreciate an expert with PICK to join the project.
This is a repeat listing - third time - of this problem.
Here's the deal: If I turn on logging on an SSIS package in Development Studio, when the package executes it will log all the events I choose to the sysdtslog90 table in the MSDB database - INCLUDING the PACKAGESTART and PACKAGEEND events.
When I create my own custom logging, however, those two events ARE NOT being logged, even though I explicitly state in my script I want those two logged. Everything else in the script (OnWarning, OnPreExecute, OnPostExecute, etc.) is being logged.
In my reading, it states that the PACKAGESTART and PACKAGEEND events are defaults and are always logged and cannot be excluded.
If this is the case, can someone explain why they aren't getting logged?
I've seen other people have run across the same issue...
