Receiving this error when we start up our Server:
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
I do not know what this means.
Having some performance issues & one database which must go into recovery mode frequently.
Any help appreciated.
Thanks,
Mark Blackburn
All of a sudden I have 4 of my databases, including pubs that are all marked suspect and seem to be un-recoverable. I have followed the Resetting the suspect status directions as well as trying to attach only the .mdf files but still run into problems reading the .ldf file. I have not tried to do the procedure of creating another database with the same name and structure then swapping the files to trick SQl but will do so if I need to. Does anyone know why this happens all of a sudden to multile databases, of which Pubs I have never used for anything??
In my log files during startup I get this error
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
Then this error for every database that is suspect, (the actual LSN numbers are different for each one).
The LSN (4:517:1) passed to log scan in database 'pubs' is invalid..
Is there anything else I can do to prevent this from happening or recover the DB's
Thanks
im running a dynamic query with open rowset in it
pseudocode:
@CMD=declare @ RETURN SELECT @RETURN =SUM(X) FROM OPENROWSET(....) SELECT @RETURN
EXEC @CMD
This pseudocode dipplay the result of @return
the problem:
capture @return into @myvalue outside the dynamic sql scope
something like
Select @myvalue=exec(@cmd)
I don't wanna run on ditributed transaction like this
insert mytable
exec(@cmd)
thanks,
joey
== I asked this question directly to Remus and wanted to share the response to all of those people using this forum ==
We recently moved our database server from SQL Server 2000 to SQL Server 2005. All applications on our intranet development server stay the same [VS.NET 2003], but recently resources in our Dev DB server ran out of space. While doing a thorough investigation, I noticed ERRORLOG file was occupying about 35 Gig of HDD space. I immediately checked SQL Server error log and noticed an entry which says €“
===========================================================================================
Date 7/7/2006 4:45:37 PM
Log SQL Server (Current - 7/7/2006 4:45:00 PM)
Source spid77s
Message
The activated proc [dbo].[SqlQueryNotificationStoredProcedure-5eaf8465-d0cb-4be7-93b6-44bb979dd41c] running on queue BW_Content.dbo.SqlQueryNotificationService-5eaf8465-d0cb-4be7-93b6-44bb979dd41c output the following: 'Could not obtain information about Windows NT group/user 'BWCINCHoffK', error code 0x534.'
===========================================================================================
What is this SqlQueryNotificationService in my database? Is it a SQL Server 2005 thing? Why the same kind of stored procedure does not exist in other databases, but BW_Content? This error is getting repeated most probably every second and is filling up our server.
I believe our corporate IT people removed our domain accounts from BWCINC domain to BWCORP domain and probably some application which is using BWCINCHoffK credential is getting errored out. I tried to locate this application and was not successful.
Is there anyway that I can stop this ERRORLOG from growing? How can I delete these log entries so that I can make space on our Hard Drive? Is there an easy way in SQL Server 2005 to locate which application is creating this error?
Response from Remus:
The 'SqlQueryNotificationService-...' is the service created by SqlDependency when you call SqlDependency.Start (). The problem you describe appears because the 'dbo' user of the database is mapped to the login that originally created this database. The SqlDependency created queue has an EXECUTE AS OWNER clause, owner is 'dbo' and therefore this is equivalent to an EXECUTE AS USER = 'dbo'. The error you see is reported by the domain controller when asked to give information about the original account 'dbo' mapps to (that is, BWCINCHoffK'): Error code: (Win32) 0x534 (1332) - No mapping between account names and security IDs was done.
To solve the issue, change 'dbo' to match a correct login, using either sp_changedbowner or ALTER AUTHORIZATION ON DATABASE::[dbname] TO [somavalidlogin]
To find the databases that have this problem, run this query:
select name, suser_sname(owner_sid) from sys.databases
The databses that have the problem will show NULL on the second column.
A similar problem is described here: http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=65711&SiteID=1
To remove the entries, use sp_cycle_errorlog to force a new errorlog file, then delete the huge log file.
---------------------------------------
I executed ALTER AUTHORIZATION ON DATABASE::[BW_Content] TO [sa];
I got this error in SQL Error Log once and the growth of ERRORLOG was stopped.
===============================================================
Date 7/10/2006 1:16:55 PM
Log SQL Server (Current - 7/10/2006 1:17:00 PM)
Source spid20s
Message
The query notification dialog on conversation handle '{6BDE95F7-0EFB-DA11-9064-000C2921B41B}.' closed due to the following error: '<?xml version="1.0"?><Error xmlns="http://schemas.microsoft.com/SQL/ServiceBroker/Error"><Code>-8490</Code><Description>Cannot find the remote service 'SqlQueryNotificationService-c15bb868-ed56-47d2-bf91-ce18b320989a' because it does not exist.</Description></Error>'.
===============================================================
Should I be concerned about this error?
Thanks
-Binoy
If I have a simple query like:
select * from bigtable
where product_code in ('abc','def','hij','klm')
I know that each of those product_codes will return a large data set. What I'd like to do is to run the same query but constrain the result set to a max rownum of 200.
Is this possible?
Hi. We're experiencing the exact same problem described in this post: http://tinyurl.com/ynqv7o
We've tried the 11 steps described there and it didn't fix the problem -- just as it didn't fix it for that person.
Help!! Thank you.
Hi,
I encountered this error while running a data flow:
OnError,,,Data Flow,,,10/14/2007 2:00:57 AM,10/14/2007 2:00:57 AM,-1073450974,0x,SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Business Unit Lookup 1" (26410) failed with error code 0xC004702C. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I'm using OLEDB Source, Lookup, SQL Destination in the data flow.
I tried running the package again and it worked fine this time.
Why is it like that?
Hi,
I am using SQL Server 2005. I got the following error in event viewer. Tried to search info from web failed. Does anyone have idea? Thanks a lot :)
[Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI handshake failed with error code 0x80090308 while establishing a connection with integrated security; the connection has been closed. [CLIENT: 202.40.9.176]
My developers are getting a "Failed to retrieve data for this request error" in SQL Server Management Studio. When I look in the SQL Server logs there are two errors logged:
Source Logon
Message
Error: 17806, Severity: 20, State: 2.
Source Logon
Message
SSPI handshake failed with error code 0x80090311 while establishing a connection with integrated security; the connection has been closed. [CLIENT: IP Address]
I can€™t seem to find any information about these errors. Any ideas?
I have a SQl2k8 R2 up and running on a win2k8 R2, I have a domain controller as well with AD 2k8 R2. It works fine but from time to time I receive a dozen of successive alerts like th folowing
DATE/TIME:Â Â Â Â Â Â
11/22/2010 12:19:57 PM
Â
DESCRIPTION:Â SSPI handshake failed with error code 0x80090311, state 14 while establishing a connection with integrated security; the connection has been closed. Reason: AcceptSecurityContext failed. The Windows error code indicates the cause of failure.Â
Â
COMMENT:Â Â Â Â Â Â
(None)
JOB RUN:Â Â Â Â Â Â Â Â Â Â Â
(None)
I understand from some threads here that it is an issue related to contacting the AD. In event viewer it is not clear what is casuing this. I have WSS databases, Biztalk server databases.....and some other user databases. NO home made applications contact sql server.
Â
What is the best route to follow to see who is not being able sometimes and why contacting the AD. I read the thread at URL.... but it is related to express 2005 and it does not apply to my case.
Hi,
I am using SQL Server 2005. I got the following error in event viewer. I tried to search on web the solution but failed. Does anyone have idea on that? Many thanks :)
Log]=Application
[EventID]=17806
[Source]=MSSQLSERVER
[Time]=02-07-2007 23:35:56
[EventMsg]=SSPI
handshake failed with error code 0x80090308 while establishing a
connection with integrated security; the connection has been closed.
[CLIENT: 202.40.9.176]
Im trying to login to sql from an external client but I keep getting these messages
Event Type: Error
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 17806
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
SSPI handshake failed with error code 0x80090302 while establishing a connection with integrated security; the connection has been closed. [CLIENT: xxxx]
Event Type: Failure Audit
Event Source: MSSQLSERVER
Event Category: (4)
Event ID: 18452
Date: 29.11.2007
Time: 15:49:23
User: N/A
Computer: xx
Description:
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: xxxx]
This only happens when the SQL server has these policies applied:
Policy
Setting
Network security: Do not store LAN Manager hash value on next password change
Enabled
Network security: LAN Manager authentication level
Send LM & NTLM - use NTLMv2 session security if negotiated
Network security: LDAP client signing requirements
Negotiate signing
Network security: Minimum session security for NTLM SSP based (including secure RPC) clients
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
Network security: Minimum session security for NTLM SSP based (including secure RPC) servers
Enabled
Require message integrity
Enabled
Require message confidentiality
Enabled
Require NTLMv2 session security
Enabled
Require 128-bit encryption
Disabled
I do not have the choice to switch to mixed mode authentication on the sql and these policy settings are a security policy requirement for me.
regards
duh123
Hi!
Have a problem to execute xp_cmdshell with a proxy user in MSSQL2005 (9.00.2047.00). The error is:
Msg 15121, Level 16, State 10, Procedure xp_cmdshell, Line 1
An error occurred during the execution of xp_cmdshell. A call to 'CreateProcessAsUser' failed with error code: '1314'.
The proxy user is a local administrator on the sql server machine. The proxy user have €œReplace a process level token€? rights thru the group SQLServer2005MSSQLUSer (http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=627221&SiteId=1).
I have even tried to use a domain administrator as proxy user, but the same error occur.
What is wrong? I have search the internet a lot and found that many people have this problem without any answer.
Thanks in advance,
John
My overnight production job has been running for months. Duration is typically 40 minutes.
Last night it started and without doing anything, it stopped. There was nothing in the SSIS log.
SQLAgent task log reported
The return value was unknown. The process exit code was -10737418.
Usually, I can find something on Google when I enter the error code; not today.
Any ideas?
All suggestions welcomed.
IanO
I have a SQL Server Agent job with a step to execute an SSIS package. The package has as one of it's connection managers the Connection Manager For Excel Files. When I run the job it fails every time. I have implemented logging and in the OnError event it states "The AcquireConnection method call to the connection manager "LOBMappingExcel" failed with error code 0xC0202009".
View 9 Replies View RelatedI get this error when trying to run xp_cmdshell. I have turned on xp_cmdshell via sp_configure and verified it is on (set to 1) by running sp_configure again. The login trying to run xp_cmdshell has sysadmin privileges. If anyone has a solution please let me know.
View 8 Replies View RelatedI've seen the previous threads on this (although maybe not all of them). However, i don't think I'm getting the error for the same reason. The full error I'm getting is:
View 73 Replies View Related
Hi Everyone-
i am facing a memery problem error while i am running the SSIS package
while i am running the package it show the following Error
In Spend Dataload package: A buffer failed while allocating 70485760 bytes.
--------------------------------------------------------------------------------
In Spend Dataload package: The system reports 54 percent memory load. There are 3747647488 bytes of physical memory with 1694883840 bytes free. There are 2147352576 bytes of virtual memory with 1061253120 bytes free. The paging file has 7328251904 bytes with 5083856896 bytes free.
--------------------------------------------------------------------------------
In Spend Dataload package: The attempt to add a row to the Data Flow task buffer failed with error code 0x8007000E.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on component "Flat File Source" (2718) returned error code 0xC02020C4. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "SourceThread0" has exited with error code 0xC0047038. There may be error messages posted before this with more information on why the thread has exited.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADCANCELLED. Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown. There may be error messages posted before this with more information on why the thread was cancelled.
--------------------------------------------------------------------------------
In Spend Dataload package: SSIS Error Code DTS_E_THREADFAILED. Thread "WorkThread0" has exited with error code 0xC0047039. There may be error messages posted before this with more information on why the thread has exited.
is there anyone know the solution of that problem and please dont tell me to use extra memery or a hardware solution as this option is not available.
thanx
Maylo
Hi, I get the following error message error : "the setup failed to read IISmimemaptable the server code is 2147024893" and I cannot uninstall SQL Server 2005. Any idea this is happening. thanks!
chi
The package runs fine if I run it by itself. Unfortunately we want to call it from another package and when we do so it fails everytime with the following error; "AcquireConnection method call to the connection manager "BPCSF" failed with error code 0xC0202009." This package is calling an AS400 and pulling data from it into a staging environment. The task that is failing is 4th task on the list and is the 3rd task to call the AS400 environment. If I need to provide more information I would be happy to do so. Any help would be greatly appreciated. Thanks!
-Krusty
Hello All,
Suddenly, the sql server is down, in the log file, C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGERRORLOG, I found the record as follows,
2007-03-05 15:40:31.59 Logon Error: 17189, Severity: 16, State: 1.
2007-03-05 15:40:31.59 Logon SQL Server failed with error code 0xc0000000 to spawn a thread to process a new login or connection. Check the SQL Server error log and the Windows event logs for information about possible related problems. [CLIENT: 172.21.123.48]
What else I can do to further investigate?
Thanks
Spencer
I can run this package in Studio and it works fine, but when I run it from SQL Server Agent, it throws this error. Does anybody know what would cause this problem. This appears to occur during validation for the package because none of the data flow steps run. The connection being used is the same connection used in all of the data flows. If validation is done in order, then prior steps using the same connection are passing validation.
Thanks,
Steve
I get the error above when I do the following.
Using VS 2008 I got a Windows Smart Device project targeting WM6 Standard and using .NET CF 3.5.
I add a new database file = creating an empty Compact 3.5 database (creates an sdf-file in my project).
Then create an empty dataset in the wizard (creates an xsd-file in my project).
Then I add a couple of tables in the database.
After that I want to use my earlier created dataset.
I mark the xsd-file and looks in Poperties.
I get the error when I try to change Custom Tool value from 'MSDataSetGenerator' to 'MSResultSetGenerator'.
Why????
I've seen other posts on this topic, but not with error 0x32.
I was attempting to change a CLUSTERED instance of SQL 2005 from dynamic port to static port and in the process have somehow messed it up to the point it will no longer start. Version is 9.00.2047.00
The ERRORLOG has the following
2007-01-31 15:02:05.77 spid9s Starting up database 'model'.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1c.
2007-01-31 15:02:05.77 Server Error: 17182, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server TDSSNIClient initialization failed with error 0x32, status code 0x1.
2007-01-31 15:02:05.77 Server Error: 17826, Severity: 18, State: 3.
2007-01-31 15:02:05.77 Server Could not start the network library because of an internal error in the network library. To determine the cause, review the errors immediately preceding this one in the error log.
2007-01-31 15:02:05.77 Server Error: 17120, Severity: 16, State: 1.
2007-01-31 15:02:05.77 Server SQL Server could not spawn FRunCM thread. Check the SQL Server error log and the Windows event logs for information about possible related problems.
The values have only been changed using SQL Server Configuration Manager (no direct registry changes have been made).
Thanks for you help.
I am receving this error: Failed to open the connection: [Database Vendor Code: 17 ], from .Net 2003/C# to Crystal Report XI with SQL Server 2000 has backend database.
Is there a security permission that has been overlooked?
Here is the code I use to access CR XI
ConnectionInfo connectionInfo = new ConnectionInfo();
TableLogOnInfo tableLogOnInfo;
Database DB;
'CrystalDecisions.CrystalReports.Engine.Table' table;
Tables tables;
//Log in
connectionInfo.ServerName = "ServerName";
connectionInfo.DatabaseName = "Database Namet";
connectionInfo.UserID = "userid";
connectionInfo.Password = "password";
//Get Table inf from report
DB = reportDocument..Database;
tables = DB.Tables;
//Looping through all the tables in CR and apply connection info
for(int i = 0; i < tables.Count; i++)
{
table = tables[ i ];
tableLogOnInfo = table.LogOnInfo;
tableLogOnInfo.ConnectionInfo = connectionInfo;
table.ApplyLogOnInfo(tableLogOnInfo);
}
CrystalReportViewer.ReportSource = ReportDocument.ReportSource;
CrystalReportViewer.Visible = true;
Any advise would be helpful.
Thank you
Error at Text Inbound Task [SQL Server Destination [9]]: The AcquireConnection method call to the connection manager "Server.Northwind" failed with error code 0xC0202009.
Error at Text Inbound Task [DTS.Pipeline]: component "SQL Server Destination" (9) failed validation and returned error code 0xC020801C.
Please keep me posted with alternate work around(s) /solution(s).
I'm trying to create a simple Data transfermation. I have a flat file that came of a unix server.. it's 177 bytes wide.. thought it was 175, but when I created the flat file connector, I could see some extra characters on the end.
My output is going to be an excel spreadsheet, I only want two columns from the input. I created an oledb jet 4.0 connection. and followed instructions from here :
http://aspalliance.com/889_Extracting_Data_from_a_Flat_File_with_SQL_Server_2005_Integration_Services
to create my datafow.
On my first attempt to dataflow, I ran into unicode errors and had to do this:
ran into a problem with unicode errors. went to the source for the flat file. for the output column in question changed to Unicode string [DT_WSTR].
When I run , here are the errors I get:
[OLE DB Destination [513]] Error: An OLE DB error has occurred. Error code: 0x80040E09. [DTS.Pipeline]
Error: The ProcessInput method on component "OLE DB Destination" (513) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running.
[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0202009.
[GanchoFileSource [1]] Information: The total number of data rows processed for file "\ammia01dev04D$JCPcpmgancho_venta_20070321.sal" is 19036.
[GanchoFileSource [1]] Error: Setting the end of rowset for the buffer failed with error code 0xC0047020.
[DTS.Pipeline] Error: The PrimeOutput method on component "GanchoFileSource" (1) returned error code 0xC0209017. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.
Hi All,
I am getting the following error if I am using the package "Transaction Option=Required" while running through Sql Job:
The AcquireConnection method call to the connection manager "<connection name>" failed with error code 0xC0202009.
while I running the SSIS package on BI environment, I am getting the following error:
[Connection manager "<connection name>"] Error: The SSIS Runtime has failed to enlist the OLE DB connection in a distributed transaction with error 0x8004D00A "Unable to enlist in the transaction.".
I know the alternative solution is to make the "Transaction Option=Supported", but in my case I have run the whole flow in a single transaction. I came to know that this has been fixed in the service pack1(ref. to http://support.microsoft.com/kb/914375). FYI.. some time it was running successful.
I have taken all the necessary step to run the SSIS package in a distributed transaction(like the steps for MSDTC) and also created the package flow in a sequence.
I was going through the link - http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=160340&SiteID=1 but all those didn't solve my problem.
If anyone can help me it will be great. or it is a bug in SSIS?
Thanks.
Jena
hello,
we have changed the name of MS SQL server 2005 from XYZ to ABC using
sp_dropserver <old_name>
GO
sp_addserver <new_name>, local
GO
Now our maitenance plan is getting failed we are not able to execute backup jobs we are getting following error
Date 03.05.2008 16:00:00
Log Job History (ADM_AdminDB_TP_Backup.Subplan_1)
Step ID 0
Server ABC
Job Name ADM_AdminDB_TP_Backup.Subplan_1
Step Name (Job outcome)
Duration 00:00:00
Sql Severity 0
Sql Message ID 0
Operator Emailed
Operator Net sent
Operator Paged
Retries Attempted 0
Message
The job failed. Unable to determine if the owner (XYZSQLServer) of job ADM_AdminDB_TP_Backup.Subplan_1 has server access (reason: Could not obtain information about Windows NT group/user 'XYZSQLServer', error code 0x534. [SQLSTATE 42000] (Error 15404)).
please help us in this issue
This error occurs when the ActiveX task tries to execute:
[ActiveX Script Task] Error: Retrieving the file name for a component failed with error code 0x001B6438.
Anybody know how to troubleshoot these errors? I can't find anything on this error code. The same script works in DTS.
Hello everyone,
I am struggling with this error and it's starting to get to me!
I have setup a simple project with just a data flow task. In this task, it retrieves a simple record "Select * From Table1 WhereId=1". The connection is an OLE Db connection using Advantage Oledb Provider (a provider for accessing dBase). It is accessing a Novell network drive. I have setup the package to both "EncryptSensitiveWithPassword" and "DontSaveSensitive". Both times i have received this error.
The funny thing is, when I set the package to "EncryptSensitiveWithPassword" and I setup a job to run the package, it never asks me for the password even though I set one up! I have a previous package (few months ago I made) that accessed the same database on the same Network drive and it works! It also asks me for a password when I try to modify or run the package (b/c I set it to "EncryptW/Password").
Can anyone give any light into this problem?
Thansk for all your support,
Adrian
Hello, I have a sql 2005 server, and I am a developer, with the database on my own machine. It alwayws works for me but after some minutes the other developer cant work in the application
He got this error
Login failed for user ''. The user is not associated with a trusted SQL Server connection. [CLIENT: 192.168.1.140]
and When I see the log event after that error, it comes with another error.
SSPI handshake failed with error code 0x8009030c while establishing a connection with integrated security; the connection has been closed. [CLIENT: 192.168.1.140]
He has IIS5 and me too.
I created a user on the domain called ASPSYS with password, then in the IIS on anonymous authentication I put that user with that password, and it works, on both machines.
and in the connection string I have.
<add key="sqlconn" value="Data Source=ESTACION15;Initial Catalog=GescomDefinitiva;Integrated Security=SSPI; Trusted_Connection=true"/>
I go to the profiler, and I see that when he browses a page, the database is accesed with user ASPSYS, but when I browse a page, the database is accesed with user SElevalencia.
Thats strange.
The only way that the other developer can work again on the project is to restart the whole machine. He has windows xp profession, I have windows 2000.
If you want me to send logs please tellme
I'm using sql server 2005, I created a customer table and set the customer_id as an uniqueidentifier that is a NEWSEQUENTIALID()...when a user is created I want to obtain the last customer_id so that I can insert it in another table that has a one to many relationship with the customer table. Please help...how do i do this?.Thanx
View 3 Replies View Related