Failed To Obtain TransactionDispenserInterface And Invalid LSN, Databases Suspect
Jan 20, 2004
All of a sudden I have 4 of my databases, including pubs that are all marked suspect and seem to be un-recoverable. I have followed the Resetting the suspect status directions as well as trying to attach only the .mdf files but still run into problems reading the .ldf file. I have not tried to do the procedure of creating another database with the same name and structure then swapping the files to trick SQl but will do so if I need to. Does anyone know why this happens all of a sudden to multile databases, of which Pubs I have never used for anything??
In my log files during startup I get this error
Failed to obtain TransactionDispenserInterface: Result Code = 0x8004d01b
Then this error for every database that is suspect, (the actual LSN numbers are different for each one).
The LSN (4:517:1) passed to log scan in database 'pubs' is invalid..
Is there anything else I can do to prevent this from happening or recover the DB's
Hi to all, is my first post, i need a query or script to obtain all users and privileges from all my databases, someone to help me. I'm learning Administration SQL server 2005.
I know that sys.database_principals and sys.server_principals have information about that, but i need users - privileges of every database.
Today we found a suspect database and after consulting this website went and ran sp_resetstatus on one database with success. After which we stopped and started the server and ran dbcc newalloc, dbcc textall, dbcc checkdb on that database. It successfully changed from its suspect status and random queries showed that the data was still intact.
Exactly the same process was run on another database and it failed to move from the suspect status after restarting the server. We then went through books online, which advised to update sysdatabases setting the database's status to 0. This also failed.
HELP PLEASE.
Does anyone know what else to try? This was a development database with no backups. This would save a weeks work. Thanks for you time.
After cloning our production SQL 2012 server to make DEV environment, there is a bunch of databases in "Suspect" mode. This is because the DB's and Logs have got out of sync.I can clean up each DB with this script:
ALTER DATABASE DB_NAME SET EMERGENCY GO DBCC CHECKDB (DB_NAME) GO ALTER DATABASE DB_NAME SET SINGLE_USER WITH ROLLBACK IMMEDIATE GO DBCC CHECKDB (DB_NAME, REPAIR_ALLOW_DATA_LOSS) GO ALTER DATABASE DB_NAME SET MULTI_USER GO
but this takes a long time replacing DB_NAME and executing for each DB.I tried putting it all into a script with variables, but I have done something wrong and it does not work. Also is there a way to just apply it to the suspect DB's?
USE master Go DECLARE @dbname sysname, @cmd varchar(1000), @cmd1 varchar(1000), @cmd2 varchar(1000), @cmd3 varchar(1000), @cmd4 varchar(1000) DECLARE db_recovery_cursor CURSOR FOR SELECT name from sysdatabases OPEN db_recovery_cursor
Hi, I have more than 80 databases on my publisher (SQL Server 2000 SP4), I tried to enable Transaction Replication on all of those databases instantly through some T-SQL programming and DTS Packages. Every thing works fine until the snapshot agents starts to take sanpshot from the publisher databases. As soon as their snapshot agents start for those 80 databases, they start giving the deadlock error. All 80 snapshot agents starts at the same time.
Error Message: Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction.
Error Detail: Transaction (Process ID xxx) was deadlocked on lock resources with another process and has been chosen as the deadlock victim. Rerun the transaction. (Source: Server_Distribution (Data source); Error number: 1205) ---------------------------------------------------------------------------------------------------------------
Hi I want to suspect database stop server first I try to rename C:Program Files (x86)Microsoft SQL ServerMSSQL.1MSSQLDatamsdbdata.mdf to msdbdata.sav and then start the server use command to check: SELECT status & 256 FROM master.dbo.sysdatabases WHERE name = database_name if the result is 256,it means the msdb is suspect,but the result is 0,it same as the normal status do you know how to set database suspect with this way, or do you know other way to suspect databse. absolutely,I could re-back my server noraml with your way Thanks
We are getting a failure when upgrading to SP1 for SQL2005. We're running Windows 2003 Enterprise Edition SP1. We're running 4 SQL 2005 instances and 6 SQL 2000 instances on this machine. One of the four 2005 instances did upgrade successfully - don't know how or why.
Looking at other postings, it seems that the 10 lines or so preceding "value 3" in the upgrade log file (under C:WINDOWSHotfixSQL9Logs) are helpful in diagnosing the problem.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (50!8C) [13:38:25:219]: Transforming table Error.
MSI (s) (50!8C) [13:38:25:219]: Note: 1: 2262 2: Error 3: -2147287038 MSI (s) (50!8C) [13:38:25:219]: Product: Microsoft SQL Server 2005 -- Error 29528. The setup has encountered an unexpected error while Installing performance counters. The error is: The specified driver is invalid.
<Failure Type='Fatal' Error='2001'> <EndFunc Name='LaunchFunction' Return='2001' GetLastError='0'> MSI (s) (50:F0) [13:38:25:251]: User policy value 'DisableRollback' is 0 MSI (s) (50:F0) [13:38:25:251]: Machine policy value 'DisableRollback' is 0 Action ended 13:38:25: InstallFinalize. Return value 3.
I'm trying to restore my DB to a new server and also a new instance of SQL 2005 SP2+ hotfix KB934458.
I've successfully restored my MSDB database and everything seems to be working fine, but now when I'm trying to do a restore of my Database RMc to the attached SAN,
I'm getting the error:
System.Data.SqlClient.SqlError: The path 'H:' has invalid attributes. It needs to be a directory. It must not be hidden, read-only, or on a removable drive. (Microsoft.SqlServer.Smo)
the H: is the Drive letter for my attached SAN.
The path I'm trying to give is H:\DBData for the MDF-file and the H:DBLog for the LDF-file.
I have the DB running on another server also with a SAN attached and there are no problems.
I also moved the MSDB to another drive on the SAN - a G-drive without any problems.
I'm trying to get some proof of concept reports made for a MOSS / SQL Server 2005 (sp2) Integrated solution. I have a simple report that displays everything in the 'incident' uploaded to the MOSS server, and it works fine.
I've made another report that uses a line chart to plot some averages. This report, called 'Average Control Time by Weekday' works 100% ok in VS2005 preview mode and both reports use the same datasource. The report is uploaded and the dataset is all linked up.
When I view the report (by clicking on it's link on my Sharepoint Site), however, I get an error:
An error has occurred during report processing.
Query execution failed for data set 'DataSource1'.
Invalid object name 'incident'.
I've checked the SQL that was run in the SQL Server Profiler to see what transactions were hitting the database. The query that the report makes when in VS2005 Preview mode is precicely the same as what Sharepoint makes when it tries to render the report.
I made another plain report (just a table view) that uses the same query as the 'Average Control' report and tested it on Sharepoint, and it works perfectly. Any ideas?
p.s. I even asked I-God (http://www.titane.ca/concordia/dfar251/igod/main.html) all he said was that I would need a court order to get rid of the recursion in AIML... and then asked for my credit card number.
We tried to move the two 2005 ReportServer databases to another platform. The actual db move worked fine (detatch/copy/attach) but when the report guy tried to change the connection info in Report Server he could not seem to make the change. So we backed-out the changes and regrouped.
This should be very cook-book. I have no experience with Report Server but I know some of you guys could to this with your eyes closed. After the databases are moved I think all we have to do is change the server name and credentials in Report Server. Is that correct? Do we have to bounce any services? Are there any tricks I can impress the other guys with?
One of my database (name XYZ) shows suspect status in EM but when i try to dig further by running below query i get only "OK" ( see query)
SELECT [name],status, case status when (status & 32) then 'Loading' when (status & 32) then 'Loading' when (status & 64) then 'Pre Recovery' when (status & 128) then 'Recovering' when (status & 256) then 'Not recoverd' when (status & 512) then ' Offline' when (status & 1024) then ' Single user' when (status & 1024) then ' Read only' when (status & 32768) then ' Emergency Mode' else 'OK' end as status FROM master.dbo.sysdatabases WHERE [name] NOT IN ('distribution', 'tempdb', 'model','Pubs','Northwind')
also i run this
select * from sysdatabases where databaseproperty(name,N'IsSuspect') <> 1
and here also i get all the database including "XYZ"...i guess if "XYZ" is suspect the resultset should not be including "XYZ"
Why if the EM shows suspect status FOR "XYZ" DATABASE it should come up when i check status column in sysdatabases table?
Using VS 2008 I got a Windows Smart Device project targeting WM6 Standard and using .NET CF 3.5. I add a new database file = creating an empty Compact 3.5 database (creates an sdf-file in my project). Then create an empty dataset in the wizard (creates an xsd-file in my project). Then I add a couple of tables in the database. After that I want to use my earlier created dataset. I mark the xsd-file and looks in Poperties. I get the error when I try to change Custom Tool value from 'MSDataSetGenerator' to 'MSResultSetGenerator'. Why????
I'm using sql server 2005, I created a customer table and set the customer_id as an uniqueidentifier that is a NEWSEQUENTIALID()...when a user is created I want to obtain the last customer_id so that I can insert it in another table that has a one to many relationship with the customer table. Please help...how do i do this?.Thanx
I'm working on a search engine right now, and I am querying out a set amount of information at one time. How can I grab the last row count of a query, and use that as a starting point, or index when a "Next 100" is pressed. For instance, a person searches through a user table, but only wants 25 users at a time. So the beginning index is 0 to 25. In my query, I have "SELECT TOP 25 from users", but now when the person searching want's to move to the next 25 users, so the index would be 26 to 50, how can I hold the last row displayed? It gets a little more complex also, if a user is searching by last name, the rows will be staggered. Is there a SQL function which will grab the number of the last row displayed? I've looked through the SQL Book, and was unable to find a function that does this, or anything close to it. I hope I made sense of this question, if you need more information, email me and I will try to clarify. Thank you for any information or hints.
If I have say 20 records of sales employees, for example, how can I get the top 3 locations for $$$sales for EACH employee? Each employee can have multiple locations where they have sold(let's say up to 50). I only want the names of the top 3 locations. The closest I can get is filtering the dataset by a HAVING clause > a dollar amount but this still gives me between 3 - 12 records for each plus I have to literally enter each salesperson's number as it stands now. Is this a loop or a cursor? Thanks.
i need to run a restore of a database overnight onto a different server using the live data .bak file. however the job failed on the first run (last night) with the error:
"Exclusive access could not be obtained because the database is in use. ...."
how do i gain this Exclusive use via an SQL statement please?
I have a new computer, clean, I installed WinXP, and I want to connect a SQL Server (other computer in the same network) For this I installed the client tools from SQL SERVER 2000 kit. Ok. When I try to connect to the server, I can't connect through "trusted connection", only whit user name and password. I mention that I set the sql server in mixed mode autentification.
When I try to connect from other computer (my laptop, or other computer from this network) I can connect both types of connection: trusted and with
sa (for example)
The question is:
How I can set up a "trusted connection" at SQL Server?
The computer is completely new, clean and has win xp with sp2.
I have a new computer, clean, I installed WinXP, and I want to connect a SQL Server (other computer in the same network) For this I installed the client tools from SQL SERVER 2000 kit. Ok. When I try to connect to the server, I can't connect through "trusted connection", only whit user name and password. I mention that I set the sql server in mixed mode autentification.
When I try to connect from other computer (my laptop, or other computer from this network) I can connect both types of connection: trusted and with
sa (for example)
The question is:
How I can set up a "trusted connection" at SQL Server?
The computer is completely new, clean and has win xp with sp2.
i need to programmatically obtain and the process constraintinformation. the problem with the output from sp_helpconstraint isthat it outputs two resultsets. (the 2nd resultset is exactly what ineed though)as far as i know i can't stick this output into a temp table to thenprocess with cursors or anything like that. i'm trying to directlyaccess all kinds of sytem tables but not getting the complete info thatthe 2nd resultset that sp_helpconstraints offers.(E.g. sp_helpindex is more useful as it outputs only one resultset ofinformation so i could programmatically use that output to do what ineed to do)any suggestions? thanks.
i need to programmatically obtain and process constraint keyinformation. the problem with the output from sp_helpconstraint isthat it outputs 2, and sometimes 3 resultsets. (the 2ndresultset/constraint_keys is exactly what i need however)because the resultsets vary in output format, i cannot programmaticallyuse the output to process in my DB proc. its essentially useless tome. i can only suppress the 1st resultset (with tablename info), andcannot suppress the occasional 3rd resultset (that has referencingforeign key info).i've tried to directly access all kinds of sytem tables but i'm notgetting the complete info that the 2nd resultset thatsp_helpconstraints offers.any suggestions? thanks.
Sorry for my englishI have a table that contains data of career about the person (staff)like this ...EMATREANIDEMEIDEGIIDecc. ..ecc. ..ecc. ..ecc. ..1199912312002123111200311000321999123120021231122003110003419991231200073115199912312001131161999123120021231162003110003719991231200212311whereEMATR is a not unique key (person ID)EANID, EMEID, EGIID (assembled) are the date of the last advance ofcareerI want extract from the table below only the actual position,therefore a view that return this rowsEMATREANIDEMEIDEGIIDecc. ..ecc. ..ecc. ..ecc. ..1200311000322003110003419991231200073115199912312001131162003110003719991231200212311I hope of to have been explainThank you from Maximiliano (italy)RE-Sorry for my english--Posted via Mailgate.ORG Server - http://www.Mailgate.ORG
i read from msdn that i need a certificate for me to be able to configure SSL which will allow me to replicate on my publication. it says that i can obtain a certificate from a certification authority (CA). do i have to pay for it?
there is a SelfSSL that i can dowload and use for 7 days have anyone of you tried this before?
I need to be able to obtain the storage space used for database log files through T-SQL commands. I can do this in version 6.5 but have been unable to accomplish this in version 7.0. Does anyone have a suggestion?
I need to be able to obtain the storage space used for database log files. I can do this in version 6.5 but have been unable to accomplish this in version 7.0. Does anyone have a suggestion?
