Failure Sending Mail: An Error Has Occurred During Report Processing.
Dec 7, 2007
Hello.
Thanks for any help anyone can offer me.
I have SQL Server Reporting services on Windows 2000.
The reports seem to be working well, but I cannot get a subscription to work. The error I get is the one in the subject line.
I look into my log files and see these lines.
ReportingServicesService!emailextension!ab0!12/07/2007-15:02:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.Runtime.InteropServices.COMException (0x80090005): Bad Data.
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
I am Getting this error in SSRS Report Subscription. I went to Subscription table Checked the Laststatus. The LastStatus is :Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will not be resent.
I have created several reports and deployed them successfully. However, when I return to view the reports some time later I receive the following error message:
An error has occurred during report processing.
Query execution failed for data set 'DataSet1'.
For more information about this error navigate to the report server on the local server machine, or enable remote errors The only way I have been able to get round the issue is to re-deploy the reports. All reports are executed from Stored Procedures.
Created Report using SQL Server Business Intelligence 2005 using Visual studio 2005 MSSQL Server 2005 datasource is a filteredAppointment dbo from MS CRM 3 Shared Datasource Report runs in visual studio 2005
deployed to ReportServer no errors Report showing on home page in Report Server Data source folder also on report server page
go to run report on the report server via internet explorer
getting following message
An error has occurred during report processing.
Cannot create a connection to data source 'FilteredAppointments'.
For more information about this error navigate to the report server on the local server machine, or enable remote errorsPlease can any one help!!!!!!
I am a novice to reporting services, can any one recommend a good basic to intermediate book. have been on the Microsoft 2030A MSSQL server 2000 reporting services 4 months ago and not had a chance to use it until know
I have two reports. They both work fine when loaded individually. I am loading them directly from a stream. I am also loading the subreport definition using LoadSubreportDefinitio(). Neither of them have parameters
I receive the following error message when trying to load the sub report.
An error occurred while executing the subreport €˜Subreport€™: An error has occurred during report processing. (rsErrorExecutingSubreport).
I get this error for all but one of the reports in a solution when trying to preview the reports. The query behind the reports work, and the published side of things works fine. I blew away all the rdl.data files in the directory (found that tip in another forum) -- the working report rebuilds the rdl.data file, but the rest continue to fail with the same error. Everything worked fine before the weekend, and I'm the only one who works on the application. The extracted SQL tables which are input to the reports have had data added to them, but I've not requested reporting that would have hit the new data (except for the one report that still works). Any ideas would be greatly welcome. Thanks in advance.
I created a 2005 SSRS SP2 report (.rdl) last week. Today I installed the SQL 2005 SP2 tools on three of my co-workers' computers. Two can access the Solution/Project/Report in BIDS without issue. The last can open the Solution/Project/Report and can run see both the data and layout tabs. When she attempts to click the preview tab, however, the following error occurs:
An error occurred during local report processing. The definition of the report '/ReportName' is invalid. An unexpected error occurred in the Report Processing. Cannot execute a program. The command being executed was "C:WINNTMicrosoft.NETFrameworkv2.0.50727vbc.exe" /noconfig @"C:Documents and SettingsuserLocal SettingsTempwnlnvzev.cmdline".
The portion in blue changes each time we attempt to access the preview pane. I have removed the .data file suggested in other threads, but that did not work. I also ran iisreset.exe as posted in another thread and that did not work either.
All versions of BIDS/SQL were installed from the same media in the same manner. Please help.
My report worked fine for a while, but suddenly I started getting the following errors for Preview:
An error occurred during local report processing.
An error has occurred during report processing.
Index was outside the bounds of the array.
I restarted VS, then rebooted my machine and the problem persists. Everything including the report posted to the server works fine. It is just the Preview of this report does not work any more. Preview of other reports work fine.
Any tip to resolve this problem would be greatly appreciated.
Dear all, I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail. but still the Mail Task is failing.. plz suggest.
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete [Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.". Progress: The SendMail task is completed. - 100 percent complete Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
I got rid of the .rdl.data files, which apparently has been a successful fix for this problem in the past. Everything worked fine Thursday when I left (I was off Friday - Saturday), but today I get this error for all but one of the reports in the solution when I try to preview the report. BTW, the published stuff works fine. Thanks in advance for any help.
I'm facing a strange problem.. I've developed few reports. they are working fine in develop environment. after successfull testing they were published on web. in web version, all reports are executing for first time.. if I change any of parameters values or without chaning also.. if I press "View Report" following error occurs..
An error has occurred during report processing. (rsProcessingAborted)
Query execution failed for data set 'dsMLGDB2Odbc'. (rsErrorExecutingCommand)
For more information about this error navigate to the report server on the local server machine, or enable remote errors
please suggest any alternative ways to overcome this issue thanks in adv.
When I am execute the SSIS packages in my machine, it is working fine,
The SSIS package contains Send Mail task, but if the same application is executed by my colleague,
he is getting the error "Failure Sending mail", but he was able to execute the same application successfully previouly. but he can able to send the mail from his outlook.
More and more often, I am seeing this error message in RS subscriptions. I would assume it means the IIS server can't connect to the corporate exchange server. However I was wondering if there is some timeout setting/configuration in RS or the IIS server (or any other kind of setting) I can change to help alleviate this problem.
Has anyone else experienced this? Or know how to fix it?
Thanks,
Jeff
UPDATE: After looking closer at the subscriptions, I have noticed that subscriptions set up by a RS Admin (who is also a server admin) seem to be working fine. It is the subscriptions that are set up by ordinary users that are failing...
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.). ),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException  with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com) B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com) C - Just the end portion of the SMTP properties: (abcd.efgh.company.com) D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
I've got this error coming up while running the sql job for AS processing. I can't find anything about it on google or anywhere else. Has anyone had issues like this?
Code Snippet Executed as user: xyzsvc_sqlsvr. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 1:21:02 PM Error: 2008-04-04 13:21:07.41 Code: 0xC1000000 Source: Analysis Services Processing Task Analysis Services Execute DDL Task Description: Internal error: An unexpected error occurred (file 'mdprocessdim.cpp', line 3429, function 'MDProcessPropertyJob::OnLaunch'). End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:21:02 PM Finished: 1:21:07 PM Elapsed: 5.141 seconds. The package execution failed. The step failed.
Hi, A transport-level error has occurred when sending the request to the server. (provider: TCP Provider, error: 0 - An existing connection was forcibly closed by the remote host.) I am using a direct connection from my Gridview to perform a huge database search. the stored procedure will take 10- 60 seconds to execute the query.
What the problem i am facing is when the sp takes long time (more than 1 minutes), then when i try any other operation like calling another sp frm another page, i am getting the above specified error.
I am new to SQL 2005. I have one issue and it is as follows:
I write a simple query and run it; it works fine.
Now I break the network connection and run the query; in this case it runs fine.
But when I reconnect the network and run the query, then I get an error as follows:
"A transport-level error has occurred when sending the request to the server. (provider: Named Pipes Provider, error: 0 - An unexpected network error occurred.) "
Every thing is local here. So how the network issue comes here?
I've tried to search on the web for a solution for this error but i didn't find any working solutions for this problem. We have 2 servers. The first one is the server we use to develop our ASP.NET 2 application. On this server we don't have this error. On the other server (use by our client) we have this error sometime and i don't know why. Both servers have the same configuration and both application have the same web.config file.
I've tried to add a try-catch and retry the query when the error occured. This seems to be working but we don't want to have to change all our connections and since we don't have this problem on the other server we want to find the source of the problem.
I have transferred a database from SQL 2000 to SQL 2005 and now I am getting an error when I try to run backup. I get there error "An error occurred while processing 'BackupMetadata' metedata for datase ID..." Does anyone have any suggestions on how to resolve this error?
I got a problem with my project on reporting services. I installed MS SQL Server 2014 (86x version), Report Builder 3.0 (for creating my reports) and Data Tools for my SQL Server.Now I created a report via Report Builder 3.0 with a SAP NetWeaver as a data source. I could create and view it in Report Builder 3.0.
But when I want to view it on my Report Server it doesn't work. I only get this error."An error has occurred during reporting processing. (Processing Aborted) An attempt has been made to use a data extension 'SAPBW' that is either not registered for this report server or is not supported in this edition of Reporting Services. (rsDataExtensionNotFound)" ...
I found on the internet a few solutions. I installed the Data Tools for the 86x version of the SQL Server. Didn't work. And when I want to change some coding in "RSReportDesigner.config" it says that I'm not allowed to save the changes in this directory.
