Failure Sending Mail: Unspecified Error For Excel Rendering
Apr 14, 2008
Hi all
When using a subscription to send mail, I find that the report can be sent in any format apart from Excel, which gives me the error: "Failure sending mail: Unspecified error". As you can imagine, this doesn't give me much to go on!
I want to use Excel format as it retains the drilldown functionality (hiding / unhiding rows). The ExecutionLog has the status as rsSuccess, but Subscription tab for the report shows the error.
Any thoughts would be most welcome!
View 3 Replies
ADVERTISEMENT
Dec 7, 2007
Hello.
Thanks for any help anyone can offer me.
I have SQL Server Reporting services on Windows 2000.
The reports seem to be working well, but I cannot get a subscription to work. The error I get is the one in the subject line.
I look into my log files and see these lines.
ReportingServicesService!emailextension!ab0!12/07/2007-15:02:07:: Error sending email. Microsoft.ReportingServices.Diagnostics.Utilities.RSException: An error has occurred during report processing. ---> Microsoft.ReportingServices.ReportProcessing.ProcessingAbortedException: An error has occurred during report processing. ---> System.Runtime.InteropServices.COMException (0x80090005): Bad Data.
Can anyone help me out with this one?
Thanks.
deep
View 6 Replies
View Related
Jun 4, 2015
I am Getting this error in SSRS Report Subscription. I went to Subscription table Checked the Laststatus. The LastStatus is :Failure sending mail: The specified string is not in the form required for an e-mail address.Mail will not be resent.
View 3 Replies
View Related
Nov 16, 2007
Hello,
On the development server, I am trying to work with subscriptions . Report Server is windows authenticated.
When no paramters exist for the report, the sucbscription is successful.
But if there are paramters for the report, email delivery fails.
These are not data driven subscriptions.
Did anyone face the same problem ? Can anyone tell me where to start debugging since logfiles just say failure to send the email.
Thanks,
SqlNew
View 2 Replies
View Related
Dec 13, 2007
Dear all,
I have switched off the firewall settings on my system and as suggested im entering the minimal information and data to send the mail.
but still the Mail Task is failing..
plz suggest.
View 11 Replies
View Related
Jun 8, 2006
Hi Everyone,
Hopefully someone out there will have an idea as this is driving me nuts.
I've setup a task to email on success/failure and keep receiving the following message when executed:
Progress: The SendMail task is initiated. - 0 percent complete
[Send Mail Task] Error: An error occurred with the following error message: "Failure sending mail.".
Progress: The SendMail task is completed. - 100 percent complete
Task Send Mail Task failed
When I configure Outlook Express on the same machine with the same settings it works.
On the SMTP Connection Manager I have left the default name, tested with both an IP address and Server Name, and no authentication or SSL.
On the Send Mail Task, it uses the above connection. The To: , From: , Subject fields are populated. Message SourceType is DirectInput, MessageSource is Test, Priority is Normal and no attachments or expressions etc.
Nothing useful is logged in the Event Viewer even with full logging turned on.
Any suggestions appreciated,
Thanks.
View 11 Replies
View Related
May 25, 2007
Hi All,
When I am execute the SSIS packages in my machine, it is working fine,
The SSIS package contains Send Mail task, but if the same application is executed by my colleague,
he is getting the error "Failure Sending mail", but he was able to execute the same application successfully previouly. but he can able to send the mail from his outlook.
Any suggestions appreciated.
Regards,
Nathan
View 2 Replies
View Related
Aug 30, 2006
I have had a development XP workstation with RS2000 and IIS sending reports via email for 6 months straight with no problems.
Today my subscriptions are failing with
Failure sending mail: The system cannot find the path specified.
Been searching and digging for hours, and if anyone has any ideas they are greatly appreciated.
View 2 Replies
View Related
May 12, 2006
More and more often, I am seeing this error message in RS subscriptions. I would assume it means the IIS server can't connect to the corporate exchange server. However I was wondering if there is some timeout setting/configuration in RS or the IIS server (or any other kind of setting) I can change to help alleviate this problem.
Has anyone else experienced this? Or know how to fix it?
Thanks,
Jeff
UPDATE: After looking closer at the subscriptions, I have noticed that subscriptions set up by a RS Admin (who is also a server admin) seem to be working fine. It is the subscriptions that are set up by ordinary users that are failing...
View 11 Replies
View Related
Oct 19, 2007
Hi all,
We receive this error from all subscriptons on this server. Any advice?
Error: "Failure sending mail: Interface not registered "
Thank you,
-Randy
View 4 Replies
View Related
Jun 25, 2015
I am trying to create subscription on report manager.
Getting this error: "Failure sending mail: The transport failed to connect to the server. ".
how to resolve this..
View 8 Replies
View Related
Mar 7, 2007
Lokendra writes "I have configured the Database mail profile and account in Sql Server 2005 but the mail is not sending and showing the following error message:
Error,235,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 1 (2007-03-05T15:16:07). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: Sorry<c/> that domain isn't in my list of allowed rcpthosts.).
),3000,90,,3/5/2007 3:16:07 PM,sa
but while in the same mail set up in previous instance of sql server 2005 the message was sending very well. After installing new instance of sql server 2005 the problem is arising.
Anybody can tell me that what I can do so that i can send mail using the SMTP databasemail account."
View 1 Replies
View Related
Jul 7, 2015
I recently started working on SSIS packages and I have a package which will Validate a table records and prepare a txt file with all details and sends the email to approriate email ids. The problem i'm facing is I'm getting System.Net.Mail.SmtpException with inner exception as A connection attempt failed because the connected party did not properly respond after a period of time, or established connection failed because connected host has failed to respond xx.xx.xx.xx:25. I'm using SMTPConnection and Windows Authentication as credentials.I also add the ISServerExec.exe to the firewall exclusion list still it throws the same error.
View 3 Replies
View Related
Feb 6, 2008
I keep getting a generic "Error Sending Mail" error. For testing purposes I am just trying to send using my own email account. What goes in the SMTP Server box in the connection manager? I have tried:
A - the exchange server address (SOMETHING.us.company.com)
B - The SMTP properties I see when I look at the properties of my email address: (my.name@abcd.efgh.company.com)
C - Just the end portion of the SMTP properties: (abcd.efgh.company.com)
D - My email address (my.name@company.com)
I don't know what to enter, or what is giving me such a generic error message.
View 7 Replies
View Related
Mar 19, 2007
Hi
Using SQL to send e-mail , returns the next error when sending to hotmail user.
Error,53,The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 3 (2007-03-16T09:43:38). Exception Message: Cannot send mails to mail server. (Mailbox name not allowed. The server response was: sorry<c/> that domain isn't in my list of allowed rcpthosts (#5.7.1)).
),244,79,,16.03.2007 09:43:38,sa
Any one can help?
Thanks,
Rodrigo Vieira
View 5 Replies
View Related
Sep 29, 2014
I have setup database mail account with the gmail smtp. But I m getting error (i.e. mail server failure) while sending or receiving database mails.
View 5 Replies
View Related
Aug 18, 2015
I have to send mail with HTML format and attaching multiple files dynamically via send mail task.
View 10 Replies
View Related
Nov 10, 2006
I know you can specify additional recipients in the To column by sepperating them with a semicolon. But whats the easiest way to send to several users, when the email address must be retrieved from a table with a query like this:
select email from problem_subscribers
where project = 'project1'
and statusmail = 'OnError'
So when the eventhandler gets an OnError i want the mail task to be sent to each problemsubscriber.
View 3 Replies
View Related
Sep 1, 2015
Below the Error Log Reported in SQL Agent (64 bit SQLServer 2008R2 Enterprise Edition Service pack 2 ,32Core CPU Numa Node and 64GB Ram
[298] SQLServer Error: 10054, TCP Provider: An existing connection was forcibly closed by the remote host. [SQLSTATE 08S01]
[298] SQLServer Error: 10054, Communication link failure [SQLSTATE 08S01]
[165] ODBC Error: 0, A network-related or instance-specific error has occurred while establishing a connection to SQL Server. Server is not found or not accessible. Check if instance name is correct and if SQL Server is configured to allow remote connections.
For more information see SQL Server Books Online. [SQLSTATE 08001]
[382] Logon to server '(local)' failed (ConnUpdateStartExecutionDate)
View 2 Replies
View Related
Mar 9, 2007
Hi every body
I want to send a simple mail using DATABASE MAIL feature in SQL SERVER 2005.
I've defined a public profile.
I've enabled Database Mail stored procedures through the Surface Area Configuration .
but I can't send a mail with sp_send_dbmail stored procedure in 'msdb' database .
when I execute sp_send_dbmail in the Managment Studio the message is
"Mail queued" but the mail is not sent.
Could it be related to Service Broker?Because the Surface Area Configuration indicates:'this inctance does not have a Service Broker endpoint'.If so, how should I make an endpoint?
here is the log file after executing sp_send_dbmail:
1) "DatabaseMail process is started"
2) "The mail could not be sent to the recipients because of the mail server failure. (Sending Mail using Account 2 (2007-03-08T00:49:29). Exception Message: Could not connect to mail server. (No connection could be made because the target machine actively refused it)."
The DatabaseMail90.exe is triggred ,so the mail is transfered to the mail queue but DatabaseMail90.exe couldn't give the mail to SMTP server.The promlem is what should I do to make DatabaseMail90.exe able to connect to the server?
please help me.
POUYAN
View 21 Replies
View Related
Oct 14, 1999
Hi.
I have problems with sending a mail from SQL Server:
SQL Mail starts.
Command: xp_sendmail 'MRudyk','Halo!'
returns:Unknown recipient: Parameter '@recipients', recipient 'Mrudyk'
'Mrudyk' is valid recipient...
View 2 Replies
View Related
Mar 28, 2008
I have written a stored procedure which should send mail from the stored procedure in sql server 2005. Here is the SP
set ANSI_NULLS ONset QUOTED_IDENTIFIER ONgo
ALTER Procedure [dbo].[sp_SMTPMail]
@SenderName varchar(100),@SenderAddress varchar(100),@RecipientName varchar(100),@RecipientAddress varchar(100),@Subject varchar(200),@Body varchar(8000),@MailServer varchar(100) = 'smtp.mail.tspl.com'
AS
SET nocount on
declare @oMail int --Object referencedeclare @resultcode int
EXEC @resultcode = sp_OACreate 'SMTPsvg.Mailer', @oMail OUT
if @resultcode = 0BEGINEXEC @resultcode = sp_OASetProperty @oMail, 'RemoteHost', @mailserverEXEC @resultcode = sp_OASetProperty @oMail, 'FromName', @SenderNameEXEC @resultcode = sp_OASetProperty @oMail, 'FromAddress', @SenderAddress
EXEC @resultcode = sp_OAMethod @oMail, 'AddRecipient', NULL, @RecipientName, @RecipientAddress
EXEC @resultcode = sp_OASetProperty @oMail, 'Subject', @SubjectEXEC @resultcode = sp_OASetProperty @oMail, 'BodyText', @Body
EXEC @resultcode = sp_OAMethod @oMail, 'SendMail', NULL
EXEC sp_OADestroy @oMailEND
SET nocount offexec sp_smtpmail 'ramana','venkataramanaiah.uppalapati@tspl.com','rajan','ramana.u@gmail.com','test','This is a sample message'
when i execute the SP by giving the following input parameters like
exec <spname> 'rajan', 'rajan.crp@tspl.com', 'venkat', 'venkat@tspl.com', 'test', 'Test Message'
It ran successfully but the recepient venkat@tspl.com did'nt receive any mail from rajan.crp@tspl.com
I used the following commands for configuring OLE Automation Procedures
exec sp_configure 'Show
View 4 Replies
View Related
Apr 27, 2000
I am having a problem with SqlServer 7.0 sending mail when the sqlserver account is not logged into the machine and mail is open. If I log off of the box and an alert sends mail it just sits in the outbox of the mail client until I log in. Is this the way it is supposed to be or am I doing something wrong. I am using the Inbox as my client.
Thanks
Tom Goltl
View 1 Replies
View Related
Jul 22, 2006
Hi,
I am using SQL Server 2005. I have configured my email on Database Mail. when I am trying to send email using xp_sendmail I am getting problem error as:
Msg 17925, Level 16, State 1, Line 0
xp_startmail: failed with mail error 0x80040111
I am using following sql statement
master.dbo.xp_startmail 'myaccount','mypwd'
master.dbo.xp_sendmail 'tomail1@mail.co.in','test'
where myaccount and mypwd is my password on my email profile.'tomail1@mail.co.in' is the destination email address..
thanks
View 15 Replies
View Related
Jun 18, 2008
Hello all,
I've run into a situation which I'm not sure which option to use. I have a web-based app that needs to send an email to a user once an auction has ended (the user being the winning bidder). The backend of the app is SQL 2005. I'm trying to figure out how to get this to work but I'm not sure if I should be using Database Mail or if I should be using a windows service on the web server that pings the database to check if the auction has ended and if the user has been notified. Can anyone shed some light as to which way I should be doing this? Additionally, I'm planning on formatting the style of the mail message so it'll need to be in HTML format and not plain text.
Any help is greatly appreciated.
Regards,
Axel
View 17 Replies
View Related
May 9, 2001
I need help regarding how to send mails through SQL server. Let me give you some more details: I am having a table where in all the e-mail id's are stored so i need to write a stored procedure that will pick up the email id from the table and it has to send the mail once you run the stored procedure.
Any help in this regard will really help...pls help me out...
View 1 Replies
View Related
Aug 25, 2000
Hi,
I have few DTS package schedule on my SQL Server 7. When the DTS fail, it's supposed to send an e-mail to me. But, for an unknown reason, the server send me some e-mail to report the failure of the DTS and suddenly...nothing. The server stop sending e-mail to report the failure of the DTS package. I decided to restart the Server and... i receive over 300 e-mails that i was supposed to receive 3 week ago about the failure of the DTS package. It's not the first time that this problem occur and everytime i need to restart the server, now i am tired of that.
Does anyone have see this problem before?
Martin
View 1 Replies
View Related
Jun 9, 2008
Hai to all.,
Im trying to send mail from Sql server but my efforts were ended in vain can any one help me on this.,
I have done the coding lik this..
step 1:
use master
go
sp_configure 'show advanced options',1
go
reconfigure
go
sp_configure 'Database Mail XPs',1
go
reconfigure
go
Step 2:
EXECUTE msdb.dbo.sysmail_add_account_sp
@account_name = 'Admin', -- Account Name on SMTP (User Defined)
@description = 'Mail Account for Database Mail',-- Account mail description. (User Defined)
@email_address = 'chandrubrave@gmail.com',-- Mail sender E-mail address (User Defined)
@display_name = 'Admin', -- Mail Sender display name, which displays, when mail received by recipient (User Defined)
@username= '', -- SMTP Sever User Name
@password='', -- SMTP Server Password
@mailserver_name = '190.160.110.50' -- SMTP Server Address'.
step 3:
EXECUTE msdb.dbo.sysmail_add_profile_sp
@profile_name = 'New profile',
@description = 'Profile used for database mail'
Step 4:
EXECUTE msdb.dbo.sysmail_add_profileaccount_sp
@profile_name = 'New profile',
@account_name = 'New Admin',
@sequence_number = 1
Step 5:
EXECUTE msdb.dbo.sysmail_add_principalprofile_sp
@profile_name = 'New profile',
@principal_name = 'public',
@is_default = 1 ;
Step 6:
declare @body1 varchar(100)
set @body1 = 'Server :'+@@servername+ ' My First Database Email '
EXEC msdb.dbo.sp_send_dbmail @recipients='chandramohanc@zylog.co.in',
@subject = 'My Mail Test',
@body = @body1,
@body_format = 'HTML' ;
I have got a response like --Mail queued.
But i dint get any mail and also in msdb.dbo.sysmail_event_log table have got an entry with description fails ..
Sorry for posting such a long post..
Thanks In advance
View 2 Replies
View Related
Feb 24, 2007
Hi All,
I'm trying to send mail from sql server I searched the net and i have some things needs calrification and help
What is the difference between sqlmail and sql agent mail ?
is it possible to use and configure them with out having OutLook installed on the server?
when creating a mail profile to be used by SQL mail this profile must be created under the account that runs SQL SERVER Service .. must this account be authenticated under Exchange server if i connect to it ??
to connect to Microsoft Exchange Server can i use the XPSMTP or i have to use SQL MAIL ??
Too much questions i Know but i appreciate your help any way
View 3 Replies
View Related
Jun 11, 2007
Hi,
i want to send Mail from sql server.which means that when i execute an query a mail will send to mentioned e-mail.is it any predefined function is there?.if,yes,can u explain Detail.
Regards
Umapathy
View 2 Replies
View Related
Jun 12, 2007
I need to find a way to send mail in blocks of 100 and 500 at intervals of 120 seconds. Does anyone know of any code for this?
Thanks!
Etymon
View 4 Replies
View Related
Jun 29, 2007
Hi,
I have 0 experience with SQLMail, and I don't want to go too deep into it as I already am trying to learn more than I can with the other parts :) I'm wondering, is there an easy way to have SQL Email me when anything strange happens with the SQL server? It would be awesome to get alerts to my phone.
Thanks very much
mike123
View 4 Replies
View Related
Feb 14, 2008
Hi,
I have the table like
Id Pickuptime
1 2008-02-14 13:07:06.317
If the record is inserted to the above table that would look at a pickuptime field in a table and if pickuptime is 2008-02-14 13:07:06.317 after 6 hour from the pickuptime then I would send a email to briteindia_kumar@hotmail.com
How i would do this would any one help to me.
Thanks
kumar
View 2 Replies
View Related
