Faster Way To Handle Unicode Conversion Problem
Dec 5, 2007
Hello,
I have another situation in which I have a source table with non unicode columns where the data needs to be copied to an MS Access 2000 table. As far as I know, the Access columns that hold string data can only be unicode.
Is there a way, maybe with a code page, that I can catch any conversion problem on any column without having to explicitly address every problem column in a derived column or data conversion transform? Probably not, but I thought I'd check.
Thank you for your help!
cdun2
View 3 Replies
ADVERTISEMENT
Jul 23, 2005
Hi all, we are now planning to upgrade our application from anon-unicode version to a unicode version. The application's backend isa SQL Server 2000 SP3.The concern is, existing business data are stored using collation"Chinese_PRC_CI_AS", i.e. Simplified Chinese. So I thought we need toextract these data out to the new SQL Server which is using Unicode (Iassume it means converting them to nchar, nvarchar type of fields for Idon't enough information from the application side, or is there ageneral unicode collation that will make even char and varchar types tostore data as Unicode?).The problem is what's the best and most efficient way to do this dataconversion?bcp? DTS? or others?thanks a lot
View 6 Replies
View Related
Jan 9, 2006
I have created an SSIS (think that is what DTS is called now) packageto run on a SQL 2005 server. It's job is to connect to a SQL 2000server, execute a stored procedure, and insert the returned data into atable of the '05 box.In both tables (source and destination), the string columns are definedas VARCHAR. But when I run my package, i get back the following error'Column "xxx" cannot convert between unicode and non-unicode stringdata types'.While they DO have different collation values --SQL_Latin1_General_CP1_CI_AS on sql 2000 database andLatin1_General_CI_AI on the sql 2005 database (columns are set to usedatabase default value) -- it was my understanding (ormis-understanding) that collation values do not affect unicode issues.Is there anything I can look at to further find the problem or even fixit?Thanks,
View 1 Replies
View Related
Jun 14, 2006
I have undertaken the following process to convert a database to unicode support. This is sql 2000 SP4
- Create a new database dbnew
- Script the old database dbold with all objects, everything, and dependencies
- Global replace varchar with nvarchar (etc etc) in the script
- Execute the script to create all objects into dbnew
- (Objects all exist fine)
- Startup DTS and choose olddb as the source, newdb as the destination
- On DTS step 3 choose "Copy Objects and Data between Sql Server Databases"
- Untick "Create destination objects"
- Change copy data to append data (all tables in dbnew are empty)
- Tick copy all objects
- Untick "Use default options" and clear every option (so hopefully we are only copying data)
- Click next and run
DTS gets through the first "phase" to 100% but then it fails on a duplicate key error on a table that has a unique key on its (now nvarchar) description field
Yet in Query Analyser I can do "insert into failingtable select * from olddb..failingtable" and the data comes across fine.
So why is it failing in DTS ? And are there any other options or settings I can try ?
thanks
View 1 Replies
View Related
May 19, 2008
Hello!
I am having a strange problem with the Copy Database Wizard. For certain databases, the copy database wizard reports an error, and the Windows event log has the following entry:
Event Name: OnError
Message: ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode conversion failed".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}
StackTrace: at Microsoft.SqlServer.Management.Dts.DtsTransferProvider.ExecuteTransfer()
at Microsoft.SqlServer.Management.Smo.Transfer.TransferData()
at Microsoft.SqlServer.Dts.Tasks.TransferObjectsTask.TransferObjectsTask.TransferDatabasesUsingSMOTransfer()
Operator: KFKIvagodavid
Source Name: msdev64___sql2005_Transfer Objects Task
Source ID: {A2DBECB6-DFF1-4A10-B99F-B0603464BAE1}
Execution ID: {DF2C49EC-68D9-48C1-8A99-CDF5533296C8}
Start Time: 2008.05.19. 15:18:13
End Time: 2008.05.19. 15:18:13
Data Code: 0
The environment is following
Source server: SQL Server 2000 SP4 32-bit (default instance) running on Windows 2003 64-bit.
Target server: SQL Server 2005 SP2 64-bit (named instance) running on Windows 2008 64-bit.
To be able to reproduce the error in the simplest configuration, I just installed the pubs and Northwind sample databases for SQL 2000 (as downloadable from Microsoft) using the Attach method (instead of running the scripts) on the SQL 2000 machine. I started Management Studio 2005 SP2 on the other machine, connected to the SQL 2000 server, and from the right click menu, used Tasks > Copy Database Wizard, using the SMO option, copy everything (including stored procedures and user error messages), and chose execute immediately. For the Northwind database, everything worked fine, however for the pubs database, the error message above was returned.
I have no idea how to move forward, a client of mine is having the same problem, but I could not get any closer to the problem.
Thanks for any help,
David
View 4 Replies
View Related
Feb 4, 2008
Hello,
I have a ssis package that I created in the BIDS and run through a job.
the package was running very good all the time, till yesterday, when I changed the
default language of my server to hebrew (its an hebrew website).
now I get this error:
Code SnippetError: 0xC002F325 at CopyTables1, Transfer SQL Server Objects Task: Execution failed with the following error: "ERROR : errorCode=-1071636471 description=SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80004005 Description: "Unicode conversion failed".
helpFile=dtsmsg.rll helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}".
Task failed: CopyTables1
how can I fix this error witout changing the language of the server?
Thanks.
The Kubyustus
View 3 Replies
View Related
Nov 9, 2007
I'm having data converted to unicode and I don't understand why.
My Sybase server is configured with the standard Latin CP1252 character set and my source column is varchar(2000). My understanding is this should not be unicode in Sybase.
My SQL Server 2005 SP2 is configured with the standard SQL_Latin1_General_CP1_CI_AS collation. Again, my understanding is this should not be unicode.
I'm connecting to Sybase Adaptive Server Anywhere 9.0.2 from SSIS SP2 via the Data Reader Source using the .Net ODBC data provider.
My SQL Server destination column is a varchar(2000) column. To me, it looks like I'm going from one equivalent data type to another yet I receive the 'cannot convert between unicode and non-unicode data types' message.
Now, I can get around this in several different ways, but that's not my question. My question is: WHERE is the conversion to unicode occuring and WHY is it occuring?
View 3 Replies
View Related
Jan 31, 2008
I am using SSIS to extract data from one oracle server to another. When i use this SSIS package in another Server, it gives me Unicode conversion error to non unicode for some Columns which are VARCHAR2 type. I have to then used drived column and use conversion, but my question is why this error from i migrate my SSIS package to another server.
View 1 Replies
View Related
May 14, 2008
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
i hope you can help me with issue.
Thanks in advance.
View 5 Replies
View Related
May 6, 2015
In my package , I am used CDC Source transformation and received the Net changes then insert into Destination. But whatever Data coming from CDC source data type Varchar value needs to Converting Non Unicode string to Unicode string SSIS. So used Data conversion transformation to achieved this.  I need to achieve this without data conversion.
View 3 Replies
View Related
Aug 7, 2012
I am following the SSIS overview video- URL...I have a flat file that i want to import the contents onto a SQL database.I created a Dataflow task, source file and oledb destination.I am getting the folliwung error -"column "A" cannot convert between unicode and non-unicode string data types".in the origin file the data type is coming as string[DT_STR] and in the destination object it is coming as "Unicode string [DT_WSTR]"I used a data conversion object in between, dosent works very well
View 5 Replies
View Related
Jul 28, 2005
Good afternoon
View 32 Replies
View Related
Aug 8, 2006
I'm connecting to a SQL Server 2005 database using the latest (beta) sql server driver (Microsoft SQL Server 2005 JDBC Driver 1.1 CTP June 2006) from within Java (Rational Application Developer).
The table in SQL Server database has collation Latin1_General_CI_AS and one of the columns is a NVARCHAR with collation Indic_General_90_CI_AS. This should be a Unicode only collation. However when storing for instance the following String:
‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_ЎўЄєÒ?Ò‘_прÑ?туф_ЂЉЊЋ
... it is saved with ? for all unicode characters as follows (when looking in the database):
‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????
The above is not correct, since all unicode characters should still be visible. When inserting the same string directly into the sql server database (without using Java) the result is ok.
Also when trying to retrieve the results again it complains about the following error within Java:
Codepage 0 is not supported by the Java environment.
Hopefully somebody has an answer for this problem. When I alter the collation of the NVARCHAR column to be Latin1_General_CI_AS as well, the data can be stored and retrieved however then of course the unicode specific characters are lost and results into ? So in that case the output is as described above (ie ‚¬_£_ÙÚÜÛùúüû_ÅÆØåæøߣÇçÑñ_¼½¾_??????_??????_????)
We would like to be able to persist and retrieve unicode characters in a SQL Server database using the correct JDBC Driver. We achieved this result already with an Oracle UTF8 database. But we need to be compliant with a SQL Server database as well. Please help.
Thanks in advance for your help.
View 7 Replies
View Related
Sep 9, 2015
I have an SSIS package that pulls data from a MYSQL DB (Using RSSBus for Salesforce in SSIS to accomplish this). Most of the columns are loading properly, but I have many columns that I need to convert.
I have been using the Data Conversion dataflow task in SSIS to convert the rows.
I have 2 data conversions that work on most of the columns, but the DESCRIPTION column continues to return an error saying "Cannot convert between unicode and non-unicode types", regardless of what I choose on the Data Conversion task. So, basically I want to dump this column data into a SQL table with NVARCHAR datatypes. Here is what I am doing in my SSIS package...
1) Grab subset of data from SOURCE
2) Converts to TEXTSTREAM. (Data Conversion)
3) Converts to STRING. (Data Conversion)
4) Load Destination table. (OLE DB Destination)
I have also tried to simply convert the values to STRING, but that doesn't work either.
So, I have 2 Data Conversions working here that process most of the data correctly. What I can do to load the DESCRIPTION column?
View 8 Replies
View Related
May 14, 2008
Hi guys and gals,
I've had some great headaches with SSIS this morning, which I have managed to get a workarounds for, but I'm not happy with them so I've come to ask for advice.
Basically, I am exporting data from an SQL Server database into an Excel spreadsheet and hitting issues with unicode and non-unicode data types.
For example, I have a column that is char(6) and have added a data conversion step to the data flow, which converts it to type DT_WSTR and then everything works!
However, this seems like a completely un-neccessary step as I should be able to do the conversion in T-SQL - but no matter what I try I keep getting the same problem.
SELECT Cast(employee_number As nvarchar(255)) As [employee_number]
FROM employee
WHERE forename = 'george'
ErrorValidation error. details: 1 [1123]: Column "employee_number" cannot convert between unicode and non-unicode string data types.
I know I have a solution (read: workaround) but I really don't want to do this everytime!
Any suggestions for what else to try?
View 8 Replies
View Related
Apr 6, 2006
I have an Excel Source component hooked to an OLE DB Destination component in my SSIS 2005 Data Flow Task. After I mapped the excel columns to the OLE DB table columns i get these errors below. I noticed that for the first error, the Excel Field format (when you mouse over the column name in the mappings section in OLE DB component) is of type [DTWSTR] and the corresponding SQL field from my SQL table that it's mapping to is of type [DT_STR] when mousing over that field in the mappings in the properties of my OLE DB component. All table fields in SQL Server for the table I'm inserting into are of type varchar.
print screens here:
http://www.webfound.net/excel_ssis.jpg
http://www.webfound.net/excel_to_oledb_mappings.jpg
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Commission Agency" and "CommissionAgency" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Column "Product" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Officer Code" and "OfficerCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Name" and "AgencyName" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Agency Id" and "AgencyID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Tran Code" and "TranCode" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "User Id" and "UserID" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [OLE DB Destination [27]]: Columns "Acct Number" and "AccountNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [DTS.Pipeline]: "component "OLE DB Destination" (27)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
View 3 Replies
View Related
Jan 15, 2007
HI.
I'm having this problem.
I use Visual Studio's, integration project to load XML file into SQL Server. In the XML file, i have defined collumns as string. When i try to load XML file with parts defined in scheme as string, i get an error "cannot convert between unicode and non-unicode string data type.
Destinated collumns in SQL are defined as varchar and char.
Thanks for help
View 11 Replies
View Related
May 7, 2009
For packages that I have created to read Oracle 10g tables, that work fine with debugging in 32-bit mode, I get an error message on all string fields when I try to run in 64-bit mode. An example error message is:[OLE DB Source [1]] Error: Column "ACCT_UNIT" cannot convert between unicode and non-unicode string data types.Another interesting warning included is:[OLE DB Source [1]] Warning: The external columns for component "OLE DB Source" (1) are out of synchronization with the data source columns. The external column "ACCT_UNIT" needs to be updated.I cannot even try to convert this data with a Data Conversion item because the (red) error is on the OLE DB Source item and stops there. It doesn't matter what the destination is or even if there is a destination in the package yet.I'm using Oracle Provider for OLE DB, Oracle Client version 10.203 for 32-bit and Oracle Client 10.204 for 64-bit.Oracle is 10g on a UNIX 64-bit server and the data is not unicode.I'm using SQL Server Enterprise 2008 (10.0.1600) on Windows Server 2008 Standard SP1 on a 64-bit server.The packages work fine in 32-bit mode and the data is not unicode data. When I change Run64BitRuntime to True in the Debugging Property Page, I get the error on the OLE DB Source item. I also get the error when I schedule a package to run using the SQL Server Agent.
View 4 Replies
View Related
Mar 7, 2008
Hi,
I have spent countless number of hours trying to solve the issue, but to no vail. My problem is SSIS throws "cannot convert between unicode and non-unicode string data types" when i am try to transform data from DB2 to SQL Server 2005. And please note, i tried all possibilities like changing the destination field which is in SQL Server 2005 to nvarchar and also text. But so far no help. And i also looked at previous posts which did not help me either.
Thank You in advance.
View 8 Replies
View Related
Jun 29, 2006
Any one know the process of transfering the database from non-unicode to unicode. Coz I like to transfer the data from english to hebrew.
View 1 Replies
View Related
Nov 8, 2006
I have built a large package and due to database changes (varchar to nvarchar) I need to do a data conversion of all the flat file columns I am bringing in, to a unicode data type. The way I know how to do this is via the data conversion component/task. My question is, I am looking for an easy way to "Do All Columns" and "Map all Columns" without doing every column by hand in both spots.
I need to change all the columns, can I do this in mass? More importantly once I convert all these and connect it to my data source it fails to map converted fields by name. Is there a way when using the data conversion task to still get it to map by name when connecting it to the OLE destination?
I know I can use the wizard to create the base package, but I have already built all the other components, renamed and set the data type and size on all the columns (over 300) and so I don't want to have to re-do all that work. What is the best solution?
In general I would be happy if I could get the post data conversion to map automatically to the source. But because its DataConversion.CustomerID it will not map to CustomerID field on destination. Any suggestions on the best way to do this would save me hours of work...
Thanks.
View 1 Replies
View Related
Apr 26, 2006
In SQL 2000 DTS, I was able to append data from an ODBC source to a SQL 2000 destination table. The destination table was created by copying an attached source table in Access to a new table, then upsizing it to SQL. The character fields come over as varchar, and that seemed to be fine with the DTS job.
Now using the same source table and the same SQL destination, only in SQL 2005 with Integration Services instead of DTS, I get an error because the connection manager interprets the source text fields as Unicode and the destination fields are varchar.
I could script the table and change the text fields in the destination table to nvarchar, but this could have adverse affect on the application that uses the destination table. Is there a way to make the connection manager see the source text fields as varchar, or have the integration package allow the append even though the destination is varchar and the source is nvarchar?
View 3 Replies
View Related
Dec 3, 2007
Hi
I'm using service broker and keep getting errors in the log even though everythig is working as expected
SQL Server 2005
Two databases
Two end points - 1 in each database
Two stored procedures:
SP1 is activated when a message enters the sending queue. it insert a new row in a table
SP2 is activated when a response is sent from the receiving queue. it cleans up the sending queue.
I have a table with an update trigger
In that trigger, if the updted row meets a certain condition a dialogue is created and a message is sent to the sending queue.
I know that SP1 and SP2 are behaving properly because i get the expected result.
Sp1 is inserteding the expected data in the table
SP2 is cleaning up the sending queue.
In the Sql Server log however i'm getting errors on both of the stored procs.
error #1
The activated proc <SP 1 Name> running on queue Applications.dbo.ffreceiverQueue output the following: 'The conversation handle is missing. Specify a conversation handle.'
error #2
The activated proc <SP 2 Name> running on queue ADAPT_APP.dbo.ffsenderQueue output the following: 'The conversation handle is missing. Specify a conversation handle.'
I would appreceiate anybody's help into why i'm getting this. have i set up the stored procs in correctly?
i can provide code of the stored procs if that helps.
thanks.
View 10 Replies
View Related
Nov 7, 2007
My ssis package exports .xls file data into a sql server table.
The fields in the sql server table have to be nvarchar instead of varchar.
If I use varchar then the ssis package gives an error about converting unicode to non-unicode...
Another ssis package exports .csv data into the sqme sql server table as above.
This time the sql server table fields have to be of type varchar because otherwise the ssis package gives an error about converting non-uniciode to unicode...
I basically would like to have a sql server table with varchar fields and let these packages import into it.
These packages may retrieve data from .csv or .xls.
How can I resolve this?
Thanks
View 3 Replies
View Related
Jan 4, 2006
I keep getting the error message below when attempting to import a text file (flat file) to an SQL Server Destination using SSIS. This database has recently been migrated from SQL Server 2000 (where I used a DTS Package that worked fine). I plan on doing further manipulation to the file after importing but have so far tried to keep one step at a time. I have tried using a smaller files and different tables but still get a similar response. I believe that the encoding of the text file is ANSI. If it is relevant the database collation is Latin1_General_CI_AS (the same as it was when 2000). Any help anyone can provide will be greatly appreciated!!!
TITLE: Package Validation Error
------------------------------
Package Validation Error
------------------------------
ADDITIONAL INFORMATION:
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 0" and "AccountNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 1" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 2" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 3" and "Name" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 4" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 5" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 6" and "ExpiryDate" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 7" and "RateType" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 8" can't be inserted because the conversion between types DT_STR and DT_BOOL is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 9" and "FullName" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 10" and "Address" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 11" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 12" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 13" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 14" and "Occupancy" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 15" and "LoanPurpose" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 16" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 17" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 18" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 19" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 20" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 21" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 22" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 23" and "DocumentLocation" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 24" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 25" and "SecurityType" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 26" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 27" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 28" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 29" and "MortgageInsurancePolicyNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 30" and "SecurityAddress" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 31" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 32" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 33" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 34" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 35" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 36" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 37" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 38" and "SecuritySuburb" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 39" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 40" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 41" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 42" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 43" and "MortgageNumber" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: Columns "Column 44" and "TitleParticulars" cannot convert between unicode and non-unicode string data types.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 45" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 46" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 47" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 48" can't be inserted because the conversion between types DT_STR and DT_I4 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 49" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 50" can't be inserted because the conversion between types DT_STR and DT_R8 is not supported.
Error at Data Flow Task [SQL Server Destination [174]]: The column "Column 51" can't be inserted because the conversion between types DT_STR and DT_DBTIMESTAMP is not supported.
Error at Data Flow Task [DTS.Pipeline]: "component "SQL Server Destination" (174)" failed validation and returned validation status "VS_ISBROKEN".
Error at Data Flow Task [DTS.Pipeline]: One or more component failed validation.
Error at Data Flow Task: There were errors during task validation.
(Microsoft.DataTransformationServices.VsIntegration)
------------------------------
BUTTONS:
OK
------------------------------
View 103 Replies
View Related
Nov 7, 2007
My ssis package exports .xls file data into a sql server table.
The fields in the sql server table have to be nvarchar instead of varchar.
If I use varchar then the ssis package gives an error about converting unicode to non-unicode...
Another ssis package exports .csv data into the sqme sql server table as above.
This time the sql server table fields have to be of type varchar because otherwise the ssis package gives an error about converting non-uniciode to unicode...
I basically would like to have a sql server table with varchar fields and let these packages import into it.
These packages may retrieve data from .csv or .xls.
How can I resolve this?Thanks
View 1 Replies
View Related
Jan 18, 2008
We have implemented our service broker architecture using conversation handle reuse per MS/Remus's recommendations. We have all of the sudden started receiving the conversation handle not found errors in the sql log every hour or so (which makes perfect sense considering the dialog timer is set for 1 hour). My question is...is this expected behavior when you have employed conversation recycling? Should you expect to see these messages pop up every hour, but the logic in the queuing proc says to retry after deleting from your conversation handle table so the messages is enqueued as expected?
Second question...i think i know why we were not receiving these errors before and wanted to confirm this theory as well. In the queuing proc I was not initializing the variable @Counter to 0 so when it came down to the retry logic it could not add 1 to null so was never entering that part of the code...I am guessing with this set up it would actually output the error to the application calling the queueing proc and NOT into the SQL error logs...is this a correct assumption?
I have attached an example of one of the queuing procs below:
Code Block
DECLARE @conversationHandle UNIQUEIDENTIFIER,
@err int,
@counter int,
@DialogTimeOut int,
@Message nvarchar(max),
@SendType int,
@ConversationID uniqueidentifier
select @Counter = 0 -- THIS PART VERY IMPORTANT LOL :)
select @DialogTimeOut = Value
from dbo.tConfiguration with (nolock)
where keyvalue = 'ConversationEndpoints' and subvalue = 'DeleteAfterSec'
WHILE (1=1)
BEGIN
-- Lookup the current SPIDs handle
SELECT @conversationHandle = [handle] FROM tConversationSPID with (nolock)
WHERE spid = @@SPID and messagetype = 'TestQueueMsg';
IF @conversationHandle IS NULL
BEGIN
BEGIN DIALOG CONVERSATION @conversationHandle
FROM SERVICE [InitiatorQueue_SER]
TO SERVICE 'ReceiveTestQueue_SER'
ON CONTRACT [TestQueueMsg_CON]
WITH ENCRYPTION = OFF;
BEGIN CONVERSATION TIMER ( @conversationHandle )
TIMEOUT = @DialogTimeOut
-- insert the conversation in the association table
INSERT INTO tConversationSPID
([spid], MessageType,[handle])
VALUES
(@@SPID, 'TestQueueMsg', @conversationHandle);
SEND ON CONVERSATION @conversationHandle
MESSAGE TYPE [TestQueueMsg] (@Message)
END
ELSE IF @conversationHandle IS NOT NULL
BEGIN
SEND ON CONVERSATION @conversationHandle
MESSAGE TYPE [TestQueueMsg] (@Message)
END
SELECT @err = @@ERROR;
-- if succeeded, exit the loop now
IF (@err = 0)
BREAK;
SELECT @counter = @counter + 1;
IF @counter > 10
BEGIN
-- Refer to http://msdn2.microsoft.com/en-us/library/ms164086.aspx for severity levels
EXEC spLogMessageQueue 20002, 8, 'Failed to SEND on a conversation for more than 10 times. Error %i.'
BREAK;
END
-- We tried on the said conversation, but failed
-- remove the record from the association table, then
-- let the loop try again
DELETE FROM tConversationSPID
WHERE [spid] = @@SPID;
SELECT @conversationHandle = NULL;
END;
View 2 Replies
View Related
Jul 20, 2005
Hi there.We have an application that can run on a non-unicode or a unicode sqlserverdatabase.Currently the application is running in a unicode database, as anon-unicode database is less than half the size, I would prefer tohave a non-unicode database for demo purposes to be on my laptop, etcetcIs it possible to change a unicode sql server 2000 database into anon-unicode database?And if so, how would I go about doing this?Any help would be greatly appreciated.ThanksRodger
View 2 Replies
View Related
Mar 28, 2007
hi all, if i have a comma delimited string and want to insert each delimited substring into a table which of the following way is faster?pass the whole string into the a stored procedure and loop through the delimited string and pick out the substring and insert into the table orloop and pass the substring into a stored procedure and insert N times?or any other better ways someone could suggest me to do thanks!
View 6 Replies
View Related
Jul 27, 2001
i have a query that i can use either and get the same results. i just need to shave some time off... which is faster the LIKE or IN () ???
thanks
kim
View 2 Replies
View Related
Jan 16, 2006
I was just wondering if this can be done any faster? code-wise that is...
Don't mind the converts, can't do without them, as the data discipline for the source table isn't always reliable, while I have to be absolutely sure the destination data ends in the required format.
UPDATE MATCH_basistabel
SET MATCH_basistabel.matchfelt = convert(varchar(50),ALL_tbl_medlemsinfo.søgenavn),
MATCH_basistabel.søgenavn = convert(varchar(50),ALL_tbl_medlemsinfo.søgenavn),
MATCH_basistabel.medlemsnavn = convert(varchar(50),ALL_tbl_medlemsinfo.medlemsnav n),
MATCH_basistabel.medlemsnavn2 = convert(varchar(50),ALL_tbl_medlemsinfo.medlemsnav n2),
MATCH_basistabel.medlemsnummer = ALL_tbl_medlemsinfo.medlemsnummer,
MATCH_basistabel.nationalitet = convert(varchar(10), ALL_tbl_medlemsinfo.nationalitet),
MATCH_basistabel.organisationsnummer = convert(varchar(10),ALL_tbl_medlemsinfo.organisati onsnummer),
MATCH_basistabel.medlemskab = convert(varchar(20), ALL_tbl_medlemsinfo.medlemskab),
MATCH_basistabel.ipdn = ALL_tbl_medlemsinfo.ipdn,
MATCH_basistabel.ipdnroll = convert(varchar(20), ALL_tbl_medlemsinfo.ipdroll),
MATCH_basistabel.franavision = 1
FROM MATCH_basistabel, ALL_tbl_medlemsinfo
WHERE isnumeric(matchfelt) = 1
AND (convert(int, MATCH_basistabel.matchfelt) = convert(int, ALL_tbl_medlemsinfo.medlemsnummer)
AND MATCH_basistabel.franavision = 0)
View 14 Replies
View Related
Feb 17, 2006
Hi Guys,
I have SQL file but it run slowly when comes to huge record. How do I make it faster. I do create an index but how to make use the index? Pls help me on this...
Many Thanks,
Regards,
Shaffiq
View 6 Replies
View Related
