Fatal Network Error 4014 When Writing Big BLOB Chunks
Jun 1, 2007
Using the SqlClient provider I'm trying to write big datachunks of maybe 20 MB each to SQL server to store in BLOBs using blobColumn.Write(...) using .NET 2.0 dbcommand object calling a Stored procedure
CREATE PROCEDURE [dbo].[putBlobByPK]
(
@id dKey
, @value VARBINARY(MAX)
, @offset bigint
, @length bigint
, @ModDttm dModDttm OUT
, @ModUser dModUser OUT
, @ModClient dModClient OUT
, @ModAppl dModAppl OUT
)
....
When doing this I can do this exactly 3 times than the application hangs (for ever).
When looking in the SQL Server log, I find the following to errors:
Error: 4014, Severity: 20, Status: 2.
A fatal error occurred while reading the input stream from the network. The session will be terminated.
I don't get this error on the client! OK, the session died.
What may be the problem?
I write big chunks like this to avoid many writes as the data shall be replicated later using peer to peer replication. And the more writes used for writing the total BLOB the more huge becomes the transaction log of the subscriber database.
TIA
Hannoman
View 1 Replies
ADVERTISEMENT
May 6, 2004
I'm using the code below to send files that are in a blob file in my database to the browser client. The code sends the file in chunks in order to increase performance. The file I'm using to test with is 7MB. It works great on Windows XP with any browser. It takes virtually the same amount of time compared to downloading the file directly from the webserver. However, Windows 2000 and Mac OS X both take about 4x the amount of time it takes to download the file on XP machines. Why the performance difference? Is there anything I can do to fix this? I tried downloading the file directly from the webserver instead of getting it out of the database and it takes the same amount of time on all 3 OS. I had the same problem on Windows XP when I wasn't sending the file in chunks, but after using the code below, it started working for XP only.
Dim bufferSize As Integer = 24000
Dim outbyte(bufferSize - 1) As Byte
Dim retval As Long
Dim startIndex As Long = 0
Dim sql As String = "SELECT ..."
Dim cmd As New SqlCommand(sql, conn)
conn.open()
Dim dr As SqlDataReader = cmd.ExecuteReader(CommandBehavior.SequentialAccess)
If dr.Read() Then
' Reset the starting byte for a new BLOB.
startIndex = 0
' Read bytes into outbyte() and retain the number of bytes returned.
retval = dr.GetBytes(DocCol, startIndex, outbyte, 0, bufferSize)
Current.Response.Clear()
Current.Response.Buffer = True
Current.Response.ContentType = "application/octet-stream"
Current.Response.AddHeader("Content-Disposition", "attachment; filename=" & myfile" & "." & myextension)
Do While retval = bufferSize
Current.Response.BinaryWrite(outbyte)
Current.Response.Flush()
' Reposition the start index to the end of the last buffer and fill the buffer.
startIndex += bufferSize
retval = dr.GetBytes(DocCol, startIndex, outbyte, 0, bufferSize)
Loop
'Write the remainder of the last chunk
Dim remaining(retval) As Byte
Array.Copy(outbyte, 0, remaining, 0, retval)
Current.Response.BinaryWrite(remaining)
Current.Response.Flush()
Current.Response.Close()
End If
dr.Close()
conn.Close()
View 1 Replies
View Related
Mar 27, 2007
I have an SSIS job that has been running overnight sucessfully has for the last two nights failed with the message:
A fatal error occurred while reading the input stream from the network. The session will be terminated.
Error: 4014, Severity: 20, State: 2.
The message is logged in both the SQL log and the application event log.
As this job step involves copying from one database to another on the current server, it is hard to account for the error. Had the error occurred in an earlier job step when database is restored to the current server from a share on another server, the error would be understandable.
The SQL server is SQL2005 SP2 running on Windows 2003 Sp1. I have been unable to locate any changes in the time frame that would account for this error.
Any ideas on how to resolve this?
View 8 Replies
View Related
Apr 23, 2008
I am having difficulty getting both xp_cmdshell and the Scripting.FileSystem to work via sp_OACreate/sp_OAMethod with files residing on network drives . I am able to create/move/copy/delete files on local drives through both of these methods, but when I specify a network drive as the target an operation requiring write access I get an "Access is Denied" error. I recognize that the SQLServer service account is being used to perform these operations, and I have granted Full control permissions to this user on the directory I'm trying to perform the operation on. Is there some other permission either on the SQLServer or Windows account that is required to enable write access from T-SQL?
--Listing of network directory works fine:
EXEC xp_cmdshell 'dir \Gol-devftprootgolsolgolEngMaint';
GO
Volume in drive \Gol-devftproot has no label.
Volume Serial Number is 5493-88CD
NULL
Directory of \Gol-devftprootgolsolgolEngMaint
NULL
04/23/2008 12:37 PM <DIR> .
04/23/2008 12:37 PM <DIR> ..
03/28/2008 01:56 PM <DIR> 40083388
04/23/2008 12:37 PM <DIR> 4008343A
04/23/2008 11:05 AM 230 4008343a.task
12/18/2007 12:15 PM <DIR> 4008CE92
04/23/2008 08:41 AM <DIR> 4008D108
04/22/2008 06:40 PM <DIR> 4008D134
04/21/2008 02:46 PM <DIR> 4008D15D
03/05/2008 10:14 PM <DIR> 4008D1BA
02/12/2008 04:41 PM <DIR> 4008D1FA
10/29/2007 11:06 PM <DIR> 4008D583
04/21/2008 02:41 PM <DIR> CMU
04/22/2008 02:25 PM 313 ESN_All.task
09/05/2007 11:22 AM <DIR> HotSpot
04/23/2008 07:25 AM <DIR> M4008CEC7
04/23/2008 07:56 AM <DIR> M4008D1BC
04/22/2008 05:24 PM <DIR> M4008D1CF
04/21/2008 02:43 PM <DIR> MEU3
04/21/2008 02:43 PM <DIR> Tools
2 File(s) 543 bytes
18 Dir(s) 25,083,801,600 bytes free
-- Local copy works fine...
EXEC xp_cmdshell 'COPY C:TestLoad4008D1FA4008D1FA.TASK C:Temp';
GO
1 file(s) copied.
-- Copy to network drive fails
EXEC xp_cmdshell 'COPY C:TestLoad4008D1FA4008D1FA.TASK \Gol-devftprootgolsolgolEngMaint';
GO
Access is denied.
0 file(s) copied.
View 8 Replies
View Related
Mar 20, 2007
We have a package that is using a ForEach loop container to access files on a network drive. For some reason I am getting a message that the ForEach enumerator is empty and did not find any files that matched the pattern. For the pattern I left the default *.* for testing purposes. I have specified the file folder as \remoteserverfilesharesubfolder and also as \remoteserverc$filesharesubfolder and have gotten the same message. However when I map a network drive and set the file folder to the network drive it finds the files. Is this a permissions issue?
After I finish processing the file I want to move it to a new directory. Once this is deployed in production, the package will not be running under a domain account and probably won't have access to the network folder. Is there any way to specifiy in the connection manager itself that it should use a specific account to access the folder?
TIA,
Sabrina
View 1 Replies
View Related
Sep 24, 2015
Got this error running a query with ssms2014
on SqlServer2014
but db has Compatibiliy level 100 (sql2008)
no sql error code in message and no error found in eventviewr (sqlserver log, windows log, application log ecc)when i run that query i got this message in "messages" tab, and in results tab i got a strange result, indeed the value returned doesn't exists in table.
ex table1.field1 possible values= 2,3
it returns 1113344
we got that error thru jdbc too...that query use a lot of joins, unfortunatley i can't post it here. today got this error, so i make a copy of 1 of involved table into another db in the same instance, re run the query on the original db, and it works well.
View 2 Replies
View Related
Aug 16, 2005
Hi,I am getting the following error (When i am trying to update the column thru windows service) Please let me know the solution for the following.The following error is comming only when i set CommandTimeout to infinity (Commandtimeout=0).General network error. Check your network documentation. Number 11 Procedure ConnectionRead (recv()). Class 20 State 0 Source .Net SqlClient Data Provider Server Line number 0 Thanks and Best RegardsNagaraju A
View 2 Replies
View Related
Feb 3, 2006
When trying to improve my app, I actually broke it (as you do) and came up with the error message reproduced herein. Any help in understanding the nature of the error and how to go about resolving it would be more than handy
Server Error in '/' Application.
Warning: Fatal error 682 occurred at Feb 3 2006 9:26PM. Note the error and time, and contact your system administrator.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SqlClient.SqlException: Warning: Fatal error 682 occurred at Feb 3 2006 9:26PM. Note the error and time, and contact your system administrator.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[SqlException (0x80131904): Warning: Fatal error 682 occurred at Feb 3 2006 9:26PM. Note the error and time, and contact your system administrator.]
System.Data.SqlClient.SqlConnection.OnError(SqlException exception, Boolean breakConnection) +857242
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +734854
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +188
System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1838
System.Data.SqlClient.SqlDataReader.HasMoreRows() +150
System.Data.SqlClient.SqlDataReader.ReadInternal(Boolean setTimeout) +214
System.Data.SqlClient.SqlDataReader.Read() +9
System.Data.Common.DataAdapter.FillLoadDataRow(SchemaMapping mapping) +156
System.Data.Common.DataAdapter.FillFromReader(DataSet dataset, DataTable datatable, String srcTable, DataReaderContainer dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue) +153
System.Data.Common.DataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords) +172
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +175
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.GridView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +41
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Control.PreRenderRecursiveInternal() +161
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +1360
Thank you in advance.
View 4 Replies
View Related
Aug 18, 2006
Extended error: [What='Offending SQL: Select max(CommitTime) as LastChangeTime from ChangeTable;Warning: Fatal error 823 occurred at Aug 18 2006 8:42AM. '] [LCID='1024'] [SourceFile=''] [SourceFileLine='-1'] [DebugInfo=''] [RecommendedAction='The ODBC data source may be incorrectly configured, the database may not be running, or there may be incorrect data in the database.'] [ExtraInfo=''] [UniqueErrorId='4005'] [Severity='5'] [Source='(ISOK File serverwrapper.cpp, Line 501)'] [CategoryId='0']
what does this error means & how it cud be resolved.
View 3 Replies
View Related
Jun 22, 2008
Here is the SQLDump log from our system. This database has not been backed up for a long time and a recent backup attempt failed. Without a recent backup, what would you advise our next step be?
=====================================================================
BugCheck Dump
=====================================================================
This file is generated by Microsoft SQL Server
version 9.00.3054.00
upon detection of fatal unexpected error. Please return this file,
the query or program that produced the bugcheck, the database and
the error log, and any other pertinent information with a Service Request.
Computer type is AT/AT COMPATIBLE.
Bios Version is INTEL - 20030825
BIOS Date: 08/25/03 14:08:08 Ver: 08.00.09
Current time is 14:38:58 06/20/08.
1 Intel x86 level 15, 3 Mhz processor (s).
Windows NT 5.2 Build 3790 CSD Service Pack 2.
Memory
MemoryLoad = 69%
Total Physical = 3054 MB
Available Physical = 929 MB
Total Page File = 4416 MB
Available Page File = 2393 MB
Total Virtual = 2047 MB
Available Virtual = 322 MB
DBCC RESULTS
--------------------
<DbccResults>
<Dbcc ID="0" Error="8966" Severity="16" State="2">Unable to read and latch page (1:258137) with latch type SH. 23
(Data error (cyclic redundancy check).) failed. </Dbcc>
<Dbcc ID="1" Error="8966" Severity="16" State="2">Unable to read and latch page (1:260400) with latch type SH. 23
(Data error (cyclic redundancy check).) failed. </Dbcc>
<Dbcc ID="2" Error="8954" Severity="10" State="1">CHECKDB found 0 allocation errors and 2 consistency errors not
associated with any single object.</Dbcc>
<Dbcc ID="3" Error="2533" Severity="16" State="1">Table error: page (1:258137) allocated to object ID 885682303,
index ID 16, partition ID 72057594204127232, alloc unit ID 72057594215858176 (type In-row data) was not seen. The
page may be invalid or may have an incorrect alloc unit ID in its header.</Dbcc>
<Dbcc ID="4" Error="8976" Severity="16" State="1">Table error: Object ID 885682303, index ID 16, partition ID 720
57594204127232, alloc unit ID 72057594215858176 (type In-row data). Page (1:258137) was not seen in the scan alth
ough its parent (1:257976) and previous (1:258136) refer to it. Check any previous errors.</Dbcc>
<Dbcc ID="5" Error="8978" Severity="16" State="1">Table error: Object ID 885682303, index ID 16, partition ID 720
57594204127232, alloc unit ID 72057594215858176 (type In-row data). Page (1:258138) is missing a reference from p
revious page (1:258137). Possible chain linkage problem.</Dbcc>
<Dbcc ID="6" Error="8990" Severity="10" State="1">CHECKDB found 0 allocation errors and 3 consistency errors in t
able 'ActivityPointerBase' (object ID 885682303).</Dbcc>
<Dbcc ID="7" Error="2533" Severity="16" State="1">Table error: page (1:260400) allocated to object ID 1339971950,
index ID 1, partition ID 72057594205503488, alloc unit ID 72057594217365504 (type In-row data) was not seen. The
page may be invalid or may have an incorrect alloc unit ID in its header.</Dbcc>
<Dbcc ID="8" Error="8976" Severity="16" State="1">Table error: Object ID 1339971950, index ID 1, partition ID 720
57594205503488, alloc unit ID 72057594217365504 (type In-row data). Page (1:260400) was not seen in the scan alth
ough its parent (1:14431) and previous (1:260391) refer to it. Check any previous errors.</Dbcc>
<Dbcc ID="9" Error="8978" Severity="16" State="1">Table error: Object ID 1339971950, index ID 1, partition ID 720
57594205503488, alloc unit ID 72057594217365504 (type In-row data). Page (1:260401) is missing a reference from p
revious page (1:260400). Possible chain linkage problem.</Dbcc>
<Dbcc ID="10" Error="8990" Severity="10" State="1">CHECKDB found 0 allocation errors and 3 consistency errors in
table 'AsyncOperationBase' (object ID 1339971950).</Dbcc>
<Dbcc ID="11" Error="8989" Severity="10" State="1">CHECKDB found 0 allocation errors and 8 consistency errors in
database 'Mindsharp_MSCRM'.</Dbcc>
<Dbcc ID="12" Error="8957" Severity="-1" State="1">DBCC CHECKDB (Mindsharp_MSCRM) WITH no_infomsgs executed by MI
NDSHARPAdministrator found 8 errors and repaired 0 errors. Elapsed time: 0 hours 7 minutes 16 seconds.</Dbcc>
<Dbcc ID="13" Error="8958" Severity="10" State="1">repair_allow_data_loss is the minimum repair level for the err
ors found by DBCC CHECKDB (Mindsharp_MSCRM).</Dbcc>
</DbccResults>
**Dump thread - spid = 62, PSS = 0x52C0D320, EC = 0x52C0D328
***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQLLOGSQLDump0002.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 06/20/08 14:38:58 spid 62
*
* DBCC database corruption
*
* Input Buffer 82 bytes -
* DBCC CHECKDB WITH NO_INFOMSGS
*
* *******************************************************************************
* -------------------------------------------------------------------------------
* Short Stack Dump
PSS @0x52C0D320
---------------
CSession @0x52C0C278
--------------------
m_spid = 62 m_cRef = 14 m_rgcRefType[0] = 1
m_rgcRefType[1] = 1 m_rgcRefType[2] = 11 m_rgcRefType[3] = 1
m_rgcRefType[4] = 0 m_rgcRefType[5] = 0 m_pmo = 0x52C0C040
m_pstackBhfPool = 0x00000000 m_dwLoginFlags = 0x83e0 m_fBackground = 0
m_fClientRequestConnReset = 0 m_fUserProc = -1 m_fConnReset = 0
m_fIsConnReset = 0 m_fInLogin = 0 m_fAuditLoginSent = 1
m_fAuditLoginFailedSent = 0 m_fReplRelease = 0 m_fKill = 0
m_ulLoginStamp = 540428 m_eclClient = 5 m_protType = 6
m_hHttpToken = FFFFFFFF
m_pV7LoginRec
---------------------
00000000: 3c010000 03000a73 00100000 00000006 840c0000 †<......s............
00000014: 00000000 e0830000 00000000 00000000 5e000500 †................^...
00000028: 00000000 00000000 68002e00 c4000500 ce000000 †........h...........
0000003C: ce001c00 06010000 06010000 0007e959 912e0601 †...............Y....
00000050: 36003c01 00003c01 00000000 0000†††††††††††††††6.<...<.......
CPhysicalConnection @0x52C0C188
-------------------------------
m_pPhyConn->m_pmo = 0x52C0C040 m_pPhyConn->m_pNetConn = 0x52C0C7B0 m_pPhyConn->m_pConnList = 0x52C0C260
m_pPhyConn->m_pSess = 0x52C0C278 m_pPhyConn->m_fTracked = -1 m_pPhyConn->m_cbPacketsize = 4096
m_pPhyConn->m_fMars = 0 m_pPhyConn->m_fKill = 0
CBatch @0x52C0CAB8
------------------
m_pSess = 0x52C0C278 m_pConn = 0x52C0CA18 m_cRef = 3
m_rgcRefType[0] = 1 m_rgcRefType[1] = 1 m_rgcRefType[2] = 1
m_rgcRefType[3] = 0 m_rgcRefType[4] = 0 m_pTask = 0x0085B4C8
EXCEPT (null) @0x3447B748
-------------------------
exc_number = 0 exc_severity = 0 exc_func = 0x02416380
Task @0x0085B4C8
----------------
CPU Ticks used (ms) = 118929 Task State = 2
WAITINFO_INTERNAL: WaitResource = 0x00000000 WAITINFO_INTERNAL: WaitType = 0x0
WAITINFO_INTERNAL: WaitSpinlock = 0x00000000 SchedulerId = 0x0
ThreadId = 0x141c m_state = 0 m_eAbortSev = 0
EC @0x52C0D328
--------------
spid = 62 ecid = 0 ec_stat = 0x0
ec_stat2 = 0x0 ec_atomic = 0x0 __fSubProc = 1
ec_dbccContext = 0x3447F560 __pSETLS = 0x52C0CA58 __pSEParams = 0x52C0CCF8
__pDbLocks = 0x52C0D618
SEInternalTLS @0x52C0CA58
-------------------------
m_flags = 0 m_TLSstatus = 3 m_owningTask = 0x0085B4C8
m_activeHeapDatasetList = 0x52C0CA58 m_activeIndexDatasetList = 0x52C0CA60
SEParams @0x52C0CCF8
--------------------
m_lockTimeout = -1 m_isoLevel = 4096 m_logDontReplicate = 0
m_neverReplicate = 0 m_XactWorkspace = 0x276C06B8 m_pSessionLocks = 0x52C0D828
m_pDbLocks = 0x52C0D618 m_execStats = 0x525CA508 m_pAllocFileLimit = 0x00000000
Thank you,
Tim
View 2 Replies
View Related
Oct 16, 2007
Hello,
I have tried two ways for executing a query and creating a dependency
on it, one using plain Sql commands, the other using Enterprise
Library wrapped commands.
I keep getting:
Warning: Fatal error 682 occurred at Oct 12 2007 11:01AM. Note the
error and time, and contact your system administrator.
string xml = cmd.ExecuteScalar() as string;
When I execute it. Does anyone know what could cause this.
I have read both of these posts and have not yet been able to
investigate the SQL machine's event viewer though:
http://forums.asp.net/p/959871/1188606.aspx#1188606
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=1203630&SiteID=1
The "value" column is an XML datatype field.
Thanks,
Josh
public static ContentXmlUtilResult GetContentXml(
string key,
bool createDependency)
{
ContentXmlUtilResult result = new ContentXmlUtilResult();
string connString = Global.Current.ConnectionString;
using (SqlConnection conn =
new SqlConnection(connString))
{
SqlCommand cmd =
new SqlCommand(
"SELECT Value FROM dbo.ContentXml WHERE [Key]
= '" + key + "'",
conn);
if (createDependency)
{
System.Web.Caching.SqlCacheDependency dependency =
new SqlCacheDependency(cmd);
result.Dependency = dependency;
}
conn.Open();
string xml = cmd.ExecuteScalar() as string;
conn.Close();
result.Content = xml;
}
return result;
//SqlCommand cmd = (SqlCommand)
// Global.Current.Database.GetSqlStringCommand(
// //@"SELECT Value FROM dbo.ContentXml WHERE [Key] =
@Key");
// @"SELECT Value FROM dbo.ContentXml WHERE [Key] = '"
+ key + "'");
////cmd.Parameters.Add("@Key", SqlDbType.VarChar).Value =
key;
//if (createDependency)
//{
// System.Web.Caching.SqlCacheDependency dependency =
// new System.Web.Caching.SqlCacheDependency(cmd);
// result.Dependency = dependency;
//}
//string xml = Global.Current.Database.ExecuteScalar(cmd)
as string;
//result.Content = xml;
//return result;
}
View 1 Replies
View Related
Jul 23, 2005
Whats happening:Error#: 40002Error Item: 01000: [Microsoft...][ODBC...][SQL...]The Statement hasbeen terminated. > GETID 'INSERT INTO Table(Column1, Column2, Column 3,Column4, Column5, Column6) VALUES("","Value1","Value2","Value3","Value4","Value5")'Error Message: 01000: Microsoft...][ODBC...][SQL...]The statement hasbeen terminated.Active Form: frmFormForm Name:---GETID Stored Procedure:---CREATE PROCEDURE GETID @strsql text ASPRINT cast(@strsql as varchar(4000))EXEC(" "+@strsql + " select @@identity as id")GO---Anyone know what could be causing it? The database has changed - thefrontend code hasn't, so it has to be a database problem. Whathappened was a few tables became incorrect so we restored them from abackup. Everything else seems to work, apart from adding a new recordto this table.You can edit current records etc..just not add.Thanks in advance,
View 1 Replies
View Related
May 13, 2008
While staring up ( XP home edition) I have the following error message: Fatal Error-Open Reg Key ex0 Failed, followed by Load Failed message.
The system boots up but the desktop item/icons & task bar keeps going on and off for awhile until only wallpaper is displayed. Mouse pointer still active but right/left click not responding.The system does not respond anymore at this point. When rebboting same thing happens.
Any idea what caised the problem and how to fix it?............thanks, LP
View 1 Replies
View Related
Oct 25, 2006
Hi all,I don’t know what happened to this function which was working OK for a few month and today it doesn’t work.In debug mode I kip getting “InvalidOperationaException was unhandled by user code”On this line:dtrResults = cmdSelect.ExecuteReader()Same behaviour on developping PCI cant find anithing that would create that problem. Function GetUserInfo(ByVal myUsr As String, ByVal strRequest As String) As String
Dim strConString As String
Dim conUsers As SqlConnection
Dim cmdSelect As SqlCommand
strConString = ConfigurationSettings.AppSettings("conString2")
conUsers = New SqlConnection(strConString)
Dim dtrResults As SqlDataReader
Dim intField As Integer
Dim usr As String
usr = "select " & strRequest & " user_ID from userlist where ul_user='"
usr &= myUsr & "'"
conUsers.Open()
cmdSelect = New SqlCommand(usr, conUsers)
dtrResults = cmdSelect.ExecuteReader()
While dtrResults.Read()
For intField = 0 To dtrResults.FieldCount - 1
GetUserInfo = dtrResults(intField).ToString()
Next
End While
conUsers.Close()
dtrResults.Close()
Return GetUserInfo
End Function Any Help will highly appriciated.Alex.
View 1 Replies
View Related
Mar 24, 2008
I have a pretty simple senario.
In a data flow task, I have a OLE DB Source, which is a simple select statement. That is then connected to a OLE DB Command object, which executes a stored procedure on a different server, with the columns of the source as parameters to the stored procedure. I then have that connected to another OLE DB Command object, that will update the row in the source, marking it processed if there wasn't an error (no errors raised) in the stored procedure.
This seems to work just fine. Rows that had errors will error out, but I have the max allowed errors set very high to prevent the task from stopping. The problem that I have noticed is that if the very last row of the original source has an error, the component will fail with a fatal error and not go back and mark the rows that did succed as processed.
The fatal error looks like this:
Error: 0xC0047022 at OrderItems, DTS.Pipeline: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "Insert OrderItem" (97) failed with error code 0xC0202009. The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
At this point I really believe this is a bug in SSIS, because if the last row succeeds, reguardless of how many rows failed in the middle, the last step runs, and updates the source as processed for the rows that did not fail. But if the last row fails, it doesn't execute the next step.
Has anyone experienced this before. I really hope there is a minor configuration change that can be made so I do not have to redesign the package. My only alternative at this point is to redesign the stored procedure to not raise an error, and return any errors in an output parameter, and then use a conditional split to determine what rows to go back and update at the source, and then rather than relying on the package output to see the errors, I'll have to write the errors to a table somewhere.
- Eric
View 1 Replies
View Related
Sep 30, 2004
Hello all,
We have a Windows 2003 Web Edition server serving a site through IIS. It connects to a Windows 2003 Standard Edition server running SQL 2000 SP3a.
This site receives the following error as seen in the topic:
[DBNETLIB][ConnectionRead (recv()).]General network error. Check your network documentation.
We've configured the server network utility to only allow TCP/IP connections. The connection string for the site is as follows:
<%
' FileName="Connection_ado_conn_string.htm"
' Type="ADO"
' HTTP="false"
' Catalog=""
' Schema=""
MM_connSpankMSSQL_STRING = "Provider=sqloledb;Data Source=SERVER_IP,1433;Network Library=DBMSSOCN;Initial Catalog=ourmaindb_1;User ID=ourmaindb_1;Password=hotcookies;"
%>
Any ideas or tips on solving this issue? We've noticed it is due to larger queries as smaller ones do work with no problems.
The servers are behind a BSD box running iptables, has 1433,1434 along with standard web ports wide open. Anything outbound is allowed.
Some further testing via ODBC on the IIS server improved things. No more connection pooling for the SQL Server driver allows for 1/3 of the query to run. Still 2/3s of it doesn't show up, and that general network error message appears.
Should have 330 rows if it works right.
View 2 Replies
View Related
May 19, 2004
Hi
While running a DTS, many times the error message: "[DBNETLIB][ConnetionWrite (WrapperWrite()).]General network error. Check your network documentation." appears.
Does somebody knows why?
I am running the DTS from a computer (not the server where the DTS is stored) and it is connected without any problem when this happens.
Thanks!!
Regards
Lautaro - Argentina.
View 4 Replies
View Related
Feb 9, 1999
Has anyone ever seen fatal error 1109, I cannot find any info on it. Also, our msdb was either corrupted at a clients site or someone deleted it and tried to recreate it to cover themselves....any how...all of the stored procedures are missing from it and it will not let us back up data or schedule tasks...do I need to re-install SQL Server 6.5 to fix this?
Thank you.
View 1 Replies
View Related
Oct 4, 2007
Hi Every one,
I am using .Net 1.1 for my web application.
And my database server is SQL Server 2005.
My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,
General Network Error. Check your network documentation
I have also searched many articles and tried following solutions but nothing working
- connectiontimeout = 0, max pool size = 7500/100, pooling = false
- SSL disabling enforce security false as mentioned in microsoft kb article.
And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string)
Can any one please help me to solve this error?
With Regards,
View 3 Replies
View Related
Aug 22, 2006
Hi,
I created one Installation file with below settings
[Options]
USERNAME=Developer
COMPANYNAME=Worldspan
INSTALLSQLDIR="C:SQL Server"
INSTALLSQLSHAREDDIR="C:SQL Server"
INSTALLSQLDATADIR="C:SQL Server"
INSTALLASDATADIR="C:SQL Server"
ADDLOCAL=SQL_Engine,SQL_Data_Files,SQL_FullText,Notification_Services,NS_Engine,NS_Client,SQL_DTS,Client_Components,Connectivity,SQL_Tools90,Tools_Legacy,SQL_Documentation,SQL_BooksOnline,SQL_AdventureWorksSamples,SQL_Samples
SAMPLEDATABASESERVER=".LOCALDEV2005"
INSTANCENAME=LOCALDEV2005
SQLBROWSERACCOUNT="NT AUTHORITYSYSTEM"
SQLACCOUNT="NT AUTHORITYSYSTEM"
AGTACCOUNT="NT AUTHORITYSYSTEM"
SQLBROWSERAUTOSTART=1
SQLAUTOSTART=1
AGTAUTOSTART=1
SECURITYMODE=SQL
SAPWD=L0ca1Dev$a
DISABLENETWORKPROTOCOLS=2
If I do the installation with the default path the installation goes fine or else the Installation fails with a fatal error. I have pasted the error log below :
Microsoft SQL Server 2005 Setup beginning at Mon Aug 21 22:13:33 2006
Process ID : 3060
C:Program FilesMicrosoft SQL Server90Setup Bootstrapsetup.exe Version: 2005.90.1399.0
Running: LoadResourcesAction at: 2006/7/21 22:13:33
Complete: LoadResourcesAction at: 2006/7/21 22:13:33, returned true
Running: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapxmlrw.dll Version:2.0.3604.0
Complete: ParseBootstrapOptionsAction at: 2006/7/21 22:13:33, returned true
Running: ValidateWinNTAction at: 2006/7/21 22:13:33
Complete: ValidateWinNTAction at: 2006/7/21 22:13:33, returned true
Running: ValidateMinOSAction at: 2006/7/21 22:13:33
Complete: ValidateMinOSAction at: 2006/7/21 22:13:33, returned true
Running: PerformSCCAction at: 2006/7/21 22:13:33
Complete: PerformSCCAction at: 2006/7/21 22:13:33, returned true
Running: ActivateLoggingAction at: 2006/7/21 22:13:33
Complete: ActivateLoggingAction at: 2006/7/21 22:13:33, returned true
Running: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33
Complete: DetectPatchedBootstrapAction at: 2006/7/21 22:13:33, returned true
Action "LaunchPatchedBootstrapAction" will be skipped due to the following restrictions:
Condition "EventCondition: __STP_LaunchPatchedBootstrap__3060" returned false.
Action "BeginBootstrapLogicStage" will be skipped due to the following restrictions:
Condition "Setup is running locally." returned true.
Running: PerformDotNetCheck2 at: 2006/7/21 22:13:33
Complete: PerformDotNetCheck2 at: 2006/7/21 22:13:33, returned true
Running: InvokeSqlSetupDllAction at: 2006/7/21 22:13:33
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlspars.dll Version:2005.90.1399.0
<Func Name='DwLaunchMsiExec'>
Examining 'sqlspars' globals to initialize 'SetupStateScope'
Opening 'MachineConfigScope' for [LHDQSKUMARR]
Trying to find Product Code from command line or passed transform
If possible, determine install id and type
Trying to find Instance Name from command line.
Instance Name = LOCALDEV2005
Trying to find install through Instance Name
Install Type = 1
If possible, determine action
Machine = LHDQSKUMARR, Article = WMIServiceWin32OSWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32CompSystemWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32ProcessorWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceReadRegWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceWin32DirectoryWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = WMIServiceCIMDataWorking, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = XMLDomDocument, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = Processor, Result = 70010 (0x1117a)
Machine = LHDQSKUMARR, Article = PhysicalMemory, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = DiskFreeSpace, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSVersion, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSServicePack, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = OSType, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = iisDep, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = AdminShare, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = PendingReboot, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = PerfMon, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = IEVersion, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = DriveWriteAccess, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = COMPlus, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = ASPNETVersionRegistration, Result = 0 (0x0)
Machine = LHDQSKUMARR, Article = MDAC25Version, Result = 0 (0x0)
*******************************************
Setup Consistency Check Report for Machine: LHDQSKUMARR
*******************************************
Article: WMI Service Requirement, Result: CheckPassed
Article: MSXML Requirement, Result: CheckPassed
Article: Operating System Minimum Level Requirement, Result: CheckPassed
Article: Operating System Service Pack Level Requirement, Result: CheckPassed
Article: SQL Compatibility With Operating System, Result: CheckPassed
Article: Minimum Hardware Requirement, Result: Warning
Description: Minimum hardware requirements are not met, therefore, some components may not perform as expected. Action: Make sure minimum hardware requirements are met. Please refer to the readme for minimum requirements.
Article: IIS Feature Requirement, Result: CheckPassed
Article: Pending Reboot Requirement, Result: CheckPassed
Article: Performance Monitor Counter Requirement, Result: CheckPassed
Article: Default Installation Path Permission Requirement, Result: CheckPassed
Article: Internet Explorer Requirement, Result: CheckPassed
Article: Check COM+ Catalogue, Result: CheckPassed
Article: ASP.Net Registration Requirement, Result: CheckPassed
Article: Minimum MDAC Version Requirement, Result: CheckPassed
<Func Name='PerformDetections'>
0
<EndFunc Name='PerformDetections' Return='0' GetLastError='0'>
Loaded DLL:C:Program FilesMicrosoft SQL Server90Setup Bootstrapsqlsval.dll Version:2005.90.1399.0
<EndFunc Name='DwLaunchMsiExec' Return='0' GetLastError='0'>
Complete: InvokeSqlSetupDllAction at: 2006/7/21 22:13:54, returned true
Running: SetPackageInstallStateAction at: 2006/7/21 22:13:54
Complete: SetPackageInstallStateAction at: 2006/7/21 22:13:54, returned true
Running: DeterminePackageTransformsAction at: 2006/7/21 22:13:55
Complete: DeterminePackageTransformsAction at: 2006/7/21 22:13:55, returned true
Running: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55
Complete: ValidateSetupPropertiesAction at: 2006/7/21 22:13:55, returned true
Running: OpenPipeAction at: 2006/7/21 22:13:55
Complete: OpenPipeAction at: 2006/7/21 22:13:55, returned false
Error: Action "OpenPipeAction" failed during execution.
Running: CreatePipeAction at: 2006/7/21 22:13:55
Complete: CreatePipeAction at: 2006/7/21 22:13:55, returned false
Error: Action "CreatePipeAction" failed during execution.
Action "RunRemoteSetupAction" will be skipped due to the following restrictions:
Condition "Action: CreatePipeAction has finished and passed." returned false.
Running: PopulateMutatorDbAction at: 2006/7/21 22:13:56
Complete: PopulateMutatorDbAction at: 2006/7/21 22:13:56, returned true
Running: GenerateRequestsAction at: 2006/7/21 22:13:56
SQL_Engine = 3
SQL_Data_Files = 3
SQL_Replication = -1
SQL_FullText = 3
SQL_SharedTools = 3
SQL_BC_DEP = 3
Analysis_Server = -1
AnalysisDataFiles = -1
AnalysisSharedTools = -1
RS_Server = -1
RS_Web_Interface = -1
RS_SharedTools = -1
Notification_Services = 3
NS_Engine = 3
NS_Client = 3
SQL_DTS = 3
Client_Components = 3
Connectivity = 3
SQL_Tools90 = 3
SQL_WarehouseDevWorkbench = -1
SDK = -1
SQLXML = -1
Tools_Legacy = 3
TOOLS_BC_DEP = 3
SQL_Documentation = 3
SQL_BooksOnline = 3
SQL_DatabaseSamples = -1
SQL_AdventureWorksSamples = 3
SQL_AdventureWorksDWSamples = -1
SQL_AdventureWorksASSamples = -1
SQL_Samples = 3
Complete: GenerateRequestsAction at: 2006/7/21 22:13:57, returned true
Running: CreateProgressWindowAction at: 2006/7/21 22:13:57
Complete: CreateProgressWindowAction at: 2006/7/21 22:13:57, returned true
Running: ScheduleActionAction at: 2006/7/21 22:13:57
Complete: ScheduleActionAction at: 2006/7/21 22:13:58, returned true
Skipped: InstallASAction.11
Skipped: Action "InstallASAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.18
Skipped: Action "InstallASAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.22
Skipped: Action "InstallASAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "as", install will be skipped as a result.
Skipped: InstallASAction.9
Skipped: Action "InstallASAction.9" was not run. Information reported during analysis:
No install request found for package: "msxml6", referred by package: "as", install will be skipped as a result.
Running: InstallDTSAction.11 at: 2006/7/21 22:13:58
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallDTSAction.11 at: 2006/7/21 22:14:0, returned true
Running: InstallDTSAction.12 at: 2006/7/21 22:14:0
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallDTSAction.12 at: 2006/7/21 22:14:2, returned true
Running: InstallDTSAction.18 at: 2006/7/21 22:14:2
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallDTSAction.18 at: 2006/7/21 22:14:4, returned true
Running: InstallDTSAction.22 at: 2006/7/21 22:14:4
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallDTSAction.22 at: 2006/7/21 22:14:7, returned true
Running: InstallDTSAction.9 at: 2006/7/21 22:14:7
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallDTSAction.9 at: 2006/7/21 22:14:8, returned true
Running: InstallNSAction.11 at: 2006/7/21 22:14:8
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallNSAction.11 at: 2006/7/21 22:14:10, returned true
Running: InstallNSAction.12 at: 2006/7/21 22:14:10
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallNSAction.12 at: 2006/7/21 22:14:12, returned true
Running: InstallNSAction.18 at: 2006/7/21 22:14:12
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallNSAction.18 at: 2006/7/21 22:14:21, returned true
Running: InstallNSAction.22 at: 2006/7/21 22:14:22
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallNSAction.22 at: 2006/7/21 22:14:24, returned true
Running: InstallNSAction.9 at: 2006/7/21 22:14:24
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallNSAction.9 at: 2006/7/21 22:14:25, returned true
Skipped: InstallRSAction.11
Skipped: Action "InstallRSAction.11" was not run. Information reported during analysis:
No install request found for package: "sqlsupport", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.18
Skipped: Action "InstallRSAction.18" was not run. Information reported during analysis:
No install request found for package: "owc11", referred by package: "rs", install will be skipped as a result.
Skipped: InstallRSAction.22
Skipped: Action "InstallRSAction.22" was not run. Information reported during analysis:
No install request found for package: "bcRedist", referred by package: "rs", install will be skipped as a result.
Running: InstallSqlAction.11 at: 2006/7/21 22:14:26
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallSqlAction.11 at: 2006/7/21 22:14:28, returned true
Running: InstallSqlAction.12 at: 2006/7/21 22:14:28
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallSqlAction.12 at: 2006/7/21 22:14:30, returned true
Running: InstallSqlAction.18 at: 2006/7/21 22:14:30
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallSqlAction.18 at: 2006/7/21 22:14:32, returned true
Running: InstallSqlAction.21 at: 2006/7/21 22:14:32
Installing: sqlwriter on target: LHDQSKUMARR
Complete: InstallSqlAction.21 at: 2006/7/21 22:14:34, returned true
Running: InstallSqlAction.22 at: 2006/7/21 22:14:34
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallSqlAction.22 at: 2006/7/21 22:14:36, returned true
Running: InstallSqlAction.9 at: 2006/7/21 22:14:36
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallSqlAction.9 at: 2006/7/21 22:14:38, returned true
Running: InstallToolsAction.11 at: 2006/7/21 22:14:38
Installing: sqlsupport on target: LHDQSKUMARR
Complete: InstallToolsAction.11 at: 2006/7/21 22:14:41, returned true
Running: InstallToolsAction.12 at: 2006/7/21 22:14:41
Installing: sqlncli on target: LHDQSKUMARR
Complete: InstallToolsAction.12 at: 2006/7/21 22:14:43, returned true
Skipped: InstallToolsAction.13
Skipped: Action "InstallToolsAction.13" was not run. Information reported during analysis:
No install request found for package: "PPESku", referred by package: "tools", install will be skipped as a result.
Running: InstallToolsAction.18 at: 2006/7/21 22:14:43
Installing: owc11 on target: LHDQSKUMARR
Complete: InstallToolsAction.18 at: 2006/7/21 22:14:46, returned true
Running: InstallToolsAction.20 at: 2006/7/21 22:14:46
Installing: BOL on target: LHDQSKUMARR
Complete: InstallToolsAction.20 at: 2006/7/21 22:15:36, returned true
Running: InstallToolsAction.22 at: 2006/7/21 22:15:36
Installing: bcRedist on target: LHDQSKUMARR
Complete: InstallToolsAction.22 at: 2006/7/21 22:15:38, returned true
Running: InstallToolsAction.9 at: 2006/7/21 22:15:38
Installing: msxml6 on target: LHDQSKUMARR
Complete: InstallToolsAction.9 at: 2006/7/21 22:15:40, returned true
Running: InstallDTSAction at: 2006/7/21 22:15:40
Installing: dts on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallDTSAction at: 2006/7/21 22:16:30, returned false
Error: Action "InstallDTSAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Running: InstallNSAction.10 at: 2006/7/21 22:16:30
Installing: sqlxml4 on target: LHDQSKUMARR
Complete: InstallNSAction.10 at: 2006/7/21 22:16:32, returned true
Running: InstallSqlAction at: 2006/7/21 22:16:32
Installing: sql on target: LHDQSKUMARR
******* Got commit request from MSI *******
Complete: InstallSqlAction at: 2006/7/21 22:19:4, returned true
Skipped: InstallToolsAction.10
Skipped: Action "InstallToolsAction.10" was not run. Information reported during analysis:
No install request found for package: "sqlxml4", referred by package: "tools", install will be skipped as a result.
Skipped: InstallASAction
Skipped: Action "InstallASAction" was not run. Information reported during analysis:
No install request found for package: "as", install will be skipped as a result.
Running: InstallNSAction at: 2006/7/21 22:19:4
Installing: ns on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallNSAction at: 2006/7/21 22:20:17, returned false
Error: Action "InstallNSAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: InstallRSAction
Skipped: Action "InstallRSAction" was not run. Information reported during analysis:
No install request found for package: "rs", install will be skipped as a result.
Running: InstallToolsAction at: 2006/7/21 22:20:17
Installing: tools on target: LHDQSKUMARR
Failed to install package
Fatal error during installation.
Setting package return code to: 1603
Complete: InstallToolsAction at: 2006/7/21 22:22:8, returned false
Error: Action "InstallToolsAction" failed during execution. Error information reported during run:
Target collection includes the local machine.
Invoking installPackage() on local machine.
Skipped: RepairForBackwardsCompatRedistAction
Skipped: Action "RepairForBackwardsCompatRedistAction" was not run. Information reported during analysis:
No install request found for package: "bcRedist", install will be skipped as a result.
Skipped: UninstallForMSDE2000Action
Skipped: Action "UninstallForMSDE2000Action" was not run. Information reported during analysis:
No install request found for package: "patchMSDE2000", install will be skipped as a result.
Skipped: UninstallForSQLAction
Skipped: Action "UninstallForSQLAction" was not run. Information reported during analysis:
No install request found for package: "patchLibertySql", install will be skipped as a result.
Skipped: UninstallForRS2000Action
Skipped: Action "UninstallForRS2000Action" was not run. Information reported during analysis:
Action: "UninstallForRS2000Action" will be skipped due to the following condition:
Condition "Action: InstallRSAction was skipped." returned true.
Running: ReportChainingResults at: 2006/7/21 22:22:9
Error: Action "ReportChainingResults" threw an exception during execution.
One or more packages failed to install. Refer to logs for error details. : 1603
Error Code: 0x80070643 (1603)
Windows Error Text: Fatal error during installation.
Source File Name: sqlchainingsqlchainingactions.cpp
Compiler Timestamp: Thu Sep 1 22:23:05 2005
Function Name: sqls::ReportChainingResults::perform
Source Line Number: 3097
I have a pentium PC with 599 MHZ speed and 1.5 GB of RAM with Windowsxp SP2. I already have an instance of SQL 2005 running at my box. Let me know if you need any more logs. When I tried to start the sql server it is working fine.
View 1 Replies
View Related
May 26, 2007
Hi We have a written a error log in Global.asax. which capture below mentioned error in the prodcution server. Same applications is working fine in some locations and some loactions we are getting the error.Any body knows why this error is occurs.Any body knows why this error is occurs. Error Message:General network error. Check your network documentation.Stack Trace: at System.Data.SqlClient.SqlInternalConnection.OpenAndLogin() at System.Data.SqlClient.SqlInternalConnection..ctor(SqlConnection connection, SqlConnectionString connectionOptions) at System.Data.SqlClient.SqlConnection.Open() at datalayer.sqldb.Execute(String ProcedureName, SqlParameter[] Parameters) at lms.User.GetUserDetails(String strUserid)ITs at LMS.Login.w_btn_Login_Click(Object sender, EventArgs e) at System.Web.UI.WebControls.Button.OnClick(EventArgs e) at System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) at System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
View 2 Replies
View Related
Oct 4, 2007
Hi,I am using .Net 1.1 for my web application.And my database server is SQL Server 2005. My application is running fine, as i can login to it and also able to view pages. But when i open Order management(having 3K records) its give me error,General Network Error. Check your network documentation I have also searched many articles and tried following solutions but nothing working- connectiontimeout = 0, max pool size = 7500/100, pooling = false- SSL disabling enforce security false as mentioned in microsoft kb article. And there's nothing any issue with hardware/firewall as my application's login and other forms are working fine(which use same database with same connection string) Can any one please help me to solve this error?
View 2 Replies
View Related
Feb 8, 2004
When I try to update the site setting, I get this Error and I don't know how to fix.
Server Error in '/DotNetNuke' Application.
--------------------------------------------------------------------------------
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
Line 281:
Line 282: myConnection.Open()
Line 283: myCommand.ExecuteNonQuery()
Line 284: myConnection.Close()
Line 285: End Sub
Source File: C:DotNetNukeComponentsAdminDB.vb Line: 283
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream) +721
System.Data.SqlClient.SqlCommand.ExecuteNonQuery() +196
DotNetNuke.AdminDB.UpdatePortalInfo(Int32 PortalId, String PortalName, String PortalAlias, String LogoFile, String FooterText, Int32 UserRegistration, Int32 BannerAdvertising, String Currency, Int32 AdministratorId, String ExpiryDate, Double HostFee, Double HostSpace, String PaymentProcessor, String ProcessorUserId, String ProcessorPassword, String Description, String KeyWords, String BackgroundFile, Int32 SiteLogHistory) in C:DotNetNukeComponentsAdminDB.vb:283
DotNetNuke.SiteSettings.Update_Click(Object sender, EventArgs e) in C:DotNetNukeadminPortalSiteSettings.ascx.vb:287
System.Web.UI.WebControls.LinkButton.OnClick(EventArgs e)
System.Web.UI.WebControls.LinkButton.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument)
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData)
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Please Help!
Thank you,
dlouanis
View 2 Replies
View Related
Jan 9, 2006
I use sqlclient to connect directly from my mobile 5 pocketpc to a sql server 2005 database on my desktop.
I use a sqldatareader to traverse the results of a query that delivers 2 fields: (1) the filespec, and (2) the image field.
I use a filestream with a binary writer to write the contents of the image data to the pocketpc's storage card.
I have a test table with 10 images, not one more than 4 MB. I cannot complete a test run prior to receiving the general network error.
The pocketPC is connected via activesync to the desktop, and I connect to the database with:
Integrated Security=false;
user id=sa
password=admin.
Any help with this strange error would be greatly appreciated.
Wil
View 5 Replies
View Related
Oct 11, 2006
Hi I get a "General Network Error Check network documentation" error sometimes, but its only while insert or update statements are fired while selects keep working perfectly.
The Error details are as follows:
General network error. Check your network documentation.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.SqlClient.SqlException: General network error. Check your network documentation.
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[SqlException: General network error. Check your network documentation.]
System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream)
View 1 Replies
View Related
Nov 15, 2007
Hello,
Just yesterday I implemented SqlCacheDependencies on my ASP.NET 2.0 web site for SQL Server 2005. My SQL Server 2005 database is in mode 90, mirrored with a second database server. Now I am getting Error 17310 while running very simple statements, but only on a specific table.
We have a table called "tblSchools" which, due to negligence and incompetence, has a maximum size of over 8,000. I plan on fixing that eventually, by splitting all the long varchar(2048) fields off into other tables.
I wanted to use SqlCacheDependencies on this table, for every single column. So I created a DateTime column called LastChanged and created a trigger. I am using LastChanged as a DateTime type instead of a TimeStamp/RowVersion type because I thought it would be more useful.
Here are the changes made:
---------------------------
-- Adding the column...
ALTER TABLE tblSchools
ADD
LastChanged DateTime Null
GO
-- The program uses this stored procedure to watch the "LastChanged" column.
CREATE PROCEDURE [apCacheWatchSchool]
@SchoolID int
AS
select LastChanged from dbo.tblSchools where SchoolID = @SchoolID
GO
-- Any updates on the table cause the LastChanged column to be updated with getdate()
CREATE TRIGGER [UpdateLastChanged_TS]
ON [dbo].[tblSchools]
AFTER INSERT,UPDATE
AS
BEGIN
SET NOCOUNT ON;
update [dbo].[tblSchools]
set LastChanged = getdate()
where SchoolID in (select SchoolID from inserted);
END
GO
---------------------------
After adding this column and the trigger and s-proc, any update to any row in tblSchools fails with error 17310. It CANNOT set LastChanged to anything. It has to remain NULL. I was able to perform the following operation (as long as the tblSchools.LastChanged updating trigger [UpdateLastChanged_TS] was disabled): "update tblSchools set SchoolName = 'ZZZZ' + SchoolName where SchoolID = 185" -- so, it's not some kind of row length limit. I think it's a limit on # of columns that can be dealt with. I don't really know.
I don't know where the problem is occurring. I am just telling you why. I got around the problem (temporarily) by simply having the trigger update a DateTime column in another table, and having the SqlCacheDependency watch that column in the other table. No biggie.
As for moving some of the enormous varchar columns off of tblSchools... I don't really care enough. I guess that's why it's been like this for so long.
So, my problem is fixed, I just wanted to submit this bug report so you can at least fail gracefully in the next version of SQL Server.
I have the log/txt/mdmp files available, and can provide them upon request; they're too big for this form, sorry. Please contact me at plushpuffin AT wwddfd.com if you have any questions.
View 1 Replies
View Related
Oct 15, 2007
We've deployed an assembly to a new production sql server 2005 instance, and have been having periodic restarts of sql server. The sql server service appears to be stopping and restarting on it's own since the assembly was deployed.
We've narrowed it down to a decryption method. We haven't been able to produce the issue on a consistant basis. Even if we put a ton of load on the stored procedure calls.
The error is below we receive (I cut out some, so it would fit in the thread), we also have mdmp files, that I've attempted to debug with Visual Studio 2005 and Windbg with no success. I have all the symbols (I'm pretty sure), but I don't have much experience with WinDbg, so it's been slow going.
Here's a little about the environment.
Windows Server 2003 Enterprise x64 SP2
Microsoft SQL Server version 9.00.3042.00 SP2
16 MB physical memory
Quad 3.2 GHz Xeon
3 sets of raid drives.
c: OS
e: sql data
e: sql logs
All Sql and windows patches are up to date.
Only thing I can figure is this is something to do with the .NET libraries. When the assembly was compiled it was set to compile for any CPU. We even tried compiling on the 64 bit OS with no luck still.
If anyone has had a similar issue, it would be most helpful, thanks,
Byron
---------------------------------------------------------------
Memory
MemoryLoad = 9%
Total Physical = 16382 MB
Available Physical = 14760 MB
Total Page File = 32159 MB
Available Page File = 30633 MB
Total Virtual = 8388607 MB
Available Virtual = 8365517 MB
**Dump thread - spid = 56, PSS = 0x0000000092BDFE90, EC = 0x0000000092BDFEA0
***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0067.txt
* *******************************************************************************
*
* BEGIN STACK DUMP:
* 10/14/07 15:49:11 spid 56
*
* A fatal error occurred in .NET Framework runtime.
*
* Input Buffer 62 bytes -
* u t i l s . d b 17 00 75 00 74 00 69 00 6c 00 73 00 2e 00 64 00 62 00
* o . d e c r y p t 6f 00 2e 00 64 00 65 00 63 00 72 00 79 00 70 00 74 00
* B a s e 6 4 §@ 42 00 61 00 73 00 65 00 36 00 34 00 00 00 00 01 a7 40
* Ã? 4 1f 09 04 d0 00 34 00 00
*
*
*
* -------------------------------------------------------------------------------
* Short Stack Dump
0000000077D67D8D Module(kernel32+0000000000027D8D)
0000000001D345DE Module(sqlservr+0000000000D345DE)
0000000001D3F3A9 Module(sqlservr+0000000000D3F3A9)
0000000002156D83 Module(sqlservr+0000000001156D83)
00000000021571C2 Module(sqlservr+00000000011571C2)
000006427F8F5FFD Module(mscorwks+00000000005C5FFD)
000006427FA4855B Module(mscorwks+000000000071855B)
000006427F888C4B Module(mscorwks+0000000000558C4B)
000006427F5D51C8 Module(mscorwks+00000000002A51C8)
000006427F5D5113 Module(mscorwks+00000000002A5113)
000006427F453A5A Module(mscorwks+0000000000123A5A)
0000000077F251EC Module(ntdll+00000000000651EC)
0000000077EE5F36 Module(ntdll+0000000000025F36)
0000000077EF31DD Module(ntdll+00000000000331DD)
000006427FA5089B Module(mscorwks+000000000072089B)
000006427806C7F8 Module(mscorlib.ni+000000000006C7F8)
000006427806B564 Module(mscorlib.ni+000000000006B564)
000006428029CBB7 Module(UNKNOWN+0000000000000000)
00000642788A6088 Module(mscorlib.ni+00000000008A6088)
000000000818E8F0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E7D0 Module(UNKNOWN+0000000000000000)
000000000818E090 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
00000005010A5F60 Module(UNKNOWN+0000000000000000)
00000005010A5F90 Module(UNKNOWN+0000000000000000)
00000005010A5FC0 Module(UNKNOWN+0000000000000000)
00000005010A5FD8 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A63B0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000019 Module(UNKNOWN+0000000000000000)
00000000841EC050 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
00000005010A5F60 Module(UNKNOWN+0000000000000000)
00000005010A5F90 Module(UNKNOWN+0000000000000000)
00000005010A5FC0 Module(UNKNOWN+0000000000000000)
00000005010A5FD8 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A6020 Module(UNKNOWN+0000000000000000)
00000005010A6180 Module(UNKNOWN+0000000000000000)
00000005010A63B0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000001900000409 Module(UNKNOWN+0000000000000000)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E7D0 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E200 Module(UNKNOWN+0000000000000000)
000000000818E200 Module(UNKNOWN+0000000000000000)
0000064280400218 Module(UNKNOWN+0000000000000000)
000000000818E250 Module(UNKNOWN+0000000000000000)
000000000818E230 Module(UNKNOWN+0000000000000000)
FFFFFFFFFFFFFFFE Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000001C52423 Module(sqlservr+0000000000C52423)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
00000005010A5F40 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
0000001900000409 Module(UNKNOWN+0000000000000000)
0000000000000001 Module(UNKNOWN+0000000000000000)
0000000000000000 Module(UNKNOWN+0000000000000000)
000000000818E340 Module(UNKNOWN+0000000000000000)
0000000080D262B0 Module(UNKNOWN+0000000000000000)
000006428029C31E Module(UNKNOWN+0000000000000000)
0000000000000004 Module(UNKNOWN+0000000000000000)
000006427F5B3B52 Module(mscorwks+0000000000283B52)
-----------------------
View 1 Replies
View Related
Jun 8, 2006
I have been trying to export an sql2000 database to sql2005 with no luck. I continuosly get the error
Msg 0, Level 11, State 0, Line 0
A severe error occurred on the current command. The results, if any, should be discarded.
I have looked upon all support material and have installed the latest sql2005 service pack, but this has not fixed the problem. a simple query as:
select * from [transaction] ta,transactionentry tr
where tr.transactionnumber=ta.transactionnumber and
glacctid=6 and ta.[time]> '3/01/2006'
would produce this fatal error.
the current version I am using is:
Microsoft SQL Server 2005 - 9.00.1399.06 (Intel X86) Oct 14 2005 00:33:37 Copyright (c) 1988-2005 Microsoft Corporation Standard Edition on Windows NT 5.2 (Build 3790: Service Pack 1)
This problem is happening on some of the most important tables in the database.
the error log contains the following:
2006-06-06 11:43:32.59 spid54 ***Stack Dump being sent to C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGSQLDump0001.txt
2006-06-06 11:43:32.59 spid54 SqlDumpExceptionHandler: Process 54 generated fatal exception c0000005 EXCEPTION_ACCESS_VIOLATION. SQL Server is terminating this process.
2006-06-06 11:43:32.59 spid54 * *******************************************************************************
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * BEGIN STACK DUMP:
2006-06-06 11:43:32.59 spid54 * 06/06/06 11:43:32 spid 54
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * Exception Address = 0136B4F0 Module(sqlservr+0036B4F0)
2006-06-06 11:43:32.59 spid54 * Exception Code = c0000005 EXCEPTION_ACCESS_VIOLATION
2006-06-06 11:43:32.59 spid54 * Access Violation occurred writing address FFFFFFFC
2006-06-06 11:43:32.59 spid54 * Input Buffer 260 bytes -
2006-06-06 11:43:32.59 spid54 * select * from [transaction] tr,transactionentry te where tr.
2006-06-06 11:43:32.59 spid54 * transactionnumber = te.transactionnumber and glacctid = 6
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 *
2006-06-06 11:43:32.59 spid54 * MODULE BASE END SIZE
2006-06-06 11:43:32.59 spid54 * sqlservr 01000000 02BA7FFF 01ba8000
2006-06-06 11:43:32.59 spid54 * ntdll 7C800000 7C8BFFFF 000c0000
2006-06-06 11:43:32.59 spid54 * kernel32 77E40000 77F41FFF 00102000
2006-06-06 11:43:32.59 spid54 * MSVCR80 78130000 781CAFFF 0009b000
2006-06-06 11:43:32.59 spid54 * msvcrt 77BA0000 77BF9FFF 0005a000
I have followed instructions on some support issues posted but none have helped. If anyone has any solution to this problem PLEASE HELP!!!!.
Thanks.
View 7 Replies
View Related
Jan 27, 2006
Have the 2005 Enterprise Evaluation version. Trying to import data from a flat file to DB table. Tried running wizard from designer studio and from creating a data flow in SBIDS
Either way I am able to setup and start excution and then bombs with a fatal error.
"SQL Server Import and Export Wizard has encountered a problem and needs to close. We are sorry for the inconvenience."
Asks to Debug or close.. Tried installing on 2 other machines and having same issue. Tried several different data files and tables same issue.
Does anyone know if this is a bug? Am I missing something with permissions?
Thanks
Bill Bialas
View 1 Replies
View Related
Oct 22, 1999
We are using DTS to transfer database from 6.5 to 7.0. The data of those tables with text datatype can not be transferred to the server with version 7.0 though the table structure is transferred. The error message we got is "Error at Destionation for Row Number 1. Error encountered so far in this task: 1. query based insertion or updating of BLOB values can not be supported.
The source we use is Microsoft ODBC driver for SQL Server.
Thanks in advance.
Su Ge
View 1 Replies
View Related
Jan 5, 2006
I have XP Pro SP2 with MDAC 2.8.1022. It had a problem so I tried to reinstall MDAC and got a Fatal Setup Error. This setup does not support installing on this operating system. I downloaded MDAC 2.8 1177 and get the same error.
I thought of uninstalling/reinstalling SP2, but this is a 2 month old Dell Latitude 610 with factory installed XP. There is no Windows Service Pack 2 option listed in the Control Panel > Add/Remove Programs.
There's some other strange things, so I wonder if they are related.
1) I have Paul set up as an administrator account. Some folders like MSSQL show that account with no permissions. I grant all the permissions to Paul for that folder. I come back later and the permissions are gone.
2) I deleted 20 files in Explorer, but 7 of them did not go away. I deleted those 7 again and they instatnly reappeared. I deleted those 7 again and then they finally went away.
3) I get a slow reaction time for things like Windows Explorer and opening and closing programs. This is suprising since it has 2 gig of RAM and 2.3 Gig processor. Could it be a memory handling problem that's causing OS problems. Probably, the memory didn't handle the OS installation well and the whole system is compromised now.
View 12 Replies
View Related
Dec 27, 2007
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
View 13 Replies
View Related
Oct 19, 2006
hi,
i have a big table (120 million records) and i want to take all this table and to insert it into another table. since this BULK insert operation can make all kind of performance problem i would like to make the bulk insert via small chunks. the table does not have any idintity.
can someone give me an exapmle with rowcount or with a loop to make each time an insert into select statment and to insert in each time for example 5000 rows.
help is appriciated,
thx,
Tomer
View 2 Replies
View Related
