Feedback From A SSIS Check Database Integrity Task
Oct 17, 2007
Hi All,
I have built a package that firstly shrinks a database and then backs it up which is scheduled to run each day, but I would like to add a check (Check Database Integrity) in as the first task and if the Database checks out ok then continue on, if not send an email.
Now, I am unsure if the Check Database Integrity Task in SSIS actually returns the success or failure message back to the package that I am after. The SQL behind the task includes the NO_INFOMSGS option.
Can anyone advise if it is possible to have the status/integrity of the database returned to the SSIS task and to proceed based on the result?
I searched the forum on this topic and saw the following explanation on Check Database Integrity Task, by DarrenSQLIS.
"The Check Database integrity task will fail if the DB has a problem. The task fails; the details are raised in the error event and dumped to the log etc. You can use on Failure precedence constraints or an OnError event handler to capture that failure and do something if you wish."
Here is the link to the quote above. http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=2290253&SiteID=1
I would like to continue this discussion on this new thread to help my understanding.
I understand that this command does dbcc checkdb( ) command on a specified server for the databases you want to check. And if a database has a problem the task will fail and raise an OnError event. DarrenSQLIS goes on to say that the error is dumped to a log. What log is this? Where do I specifiy the location of this log?
I am administering several SQL Servers running SQL Server 2005 SP2 Build 3042. I have a common maintenance plan that runs on each of the servers. The maintenance plan runs fine on all the servers except for one. On the one server the Database Integrity check fails with the following error:
Check Database integrity on Local server connection Databases: <list of databases> Include indexes Task start: 2008-02-21T00:05:42. Task end: 2008-02-21T00:05:46. Failed0) Alter failed for Server €˜XYZ€™
I created a test maintenance plan to just do the integrity check and selected one database only and this also failed with the same error message. I ran this test maintenance plan and configured it for each of the databases in question and it failed each time. If I run the DBCC manually against the databases they all report fine.
I read some of the post that talked about the €œAllow Updates€? being set incorrectly but that does not apply to my problem since my configured and run values are set to 0.
Ever since upgrading SQL Server 2005 to SP2 build 3050 all my maintenance plans which begin with a Check Database Integrity Task are failing! If I remove the task from the plan they all execute properly. If I run the T-SQL equivalent manually it executes properly.
I upgraded the server to build 3054 and rebooted several times and Im still having no luck. What am I doing wrong? Thanks for your help with this. -Kenny
im trying to set up maintenance plan for the check database integrity...
In sql 2000 you get a nice little log in SQL Logs DBCC CHECKDB (WSS_Search_db3) executed by xxx found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
But in SQL 2005 Im not getting a nice log of this but getting it against some system database and not the database i selected
Date1/22/2008 5:19:43 PM LogSQL Server (Current - 1/22/2008 5:19:00 PM) Sourcespid84 Message DBCC CHECKDB (mssqlsystemresource) WITH no_infomsgs executed by XXX found 0 errors and repaired 0 errors. Elapsed time: 0 hours 0 minutes 1 seconds.
Anyone got this to work? Trying to get the same message i got for SQL 2000 or at least so i can confirm it ran.
I have no way to test this. If let's say the database has logical integrity errors, will it throw back an error to the Check database integrity object such that, the error arrow (the red line which is the error handler stuff) will be triggered for notification purposes?
what does check database integrity in maintenance plan do.
i heard that the transactional log growth in sql server should be fixed to maximum available disk space and must be monitore the threshold through maintenance plan.how can it be done. please advice me through maintance plan instead of shrinking the log as it is unnecessary IO to the disk.
How often is the check database integrity scheduled. is it daily or weekly.
I have a database hosted that doesnt passes the integrity test. Here is the error it gives : Executing the query "USE [db_cs] failed with the following error: "Could not locate entry in sysdatabases for database 'db_cs'. No entry found with that name. Make sure that the name is entered correctly.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly.
Any idea whats wrong and how I can let the integrity test pass for this db.
I have setup a full maintenance plan on SQL2005. When I run the job, I don't see any error but by loooking at the Log file viewer it appears that Check Database Integrity step failed because :
Alter failed for Server 'LUMONT001'.
Moreover, when I run DBCC CHECKDB from the console I have no error message. Any clue? Thanks, Paul
As per the advice given by somebody i set ldf initial log size as 29 gb and restricted the growth and set the autogrowth to 500 mb i did not run and shrink ldf command on daily basis. this is the advice given by another dba.
then he suggested to create a maintenance plan to check database integrity check. whick will check the disk space threshold.
i did not understand how will the maintenance plan check the disk space and give an alert. where should i check the alert for this maintenance plan. secondly how can i stop my database log file to deliver a message that my disk is full.
please suggest me a best method. where i am wrong , how should i handle the situation without the dba monitoring. and our system has lot of batches running for every minute.
I met a very strange problem recently. I set up a database integrity check maintenance plan. But this job failed every time. I looked into the logs, the error message was that Databases that have a compatibility level of 70 (SQL Server version 7.0) will be skipped. I used the sp_helpdb to check the version of the databases included in my maintenance plan. The sp result shows that all the databases are above version 80....
Even more strange, i can successfully run the dbcc check query on each database.
Any comment and suggestion will be very appreciated.
I've been running the Ola Hallengren maintenance script for the last five months without missing a beat. Today I find an error stating the UserDatabase Integrity check job failed last night. This is running on SQL Server 2014 BI edition w/64 Gigs.
I ran a DBCC CHECKDB on each database manually and all worked until I tried it on the biggest one that is about 18 gbs. It just keeps running and I eventually stopped it so I'm guessing it is memory, but doesn't make sense considering it has 64 gbs. I have it set to 64/4 max / min. Again, this was never an issue until last night.I've been looking up all morning, but not seeing much on this error "The operating system returned error 1453"?
I installed SQL Server 2005 Enterprise, then SP1 and then SP2, Maintenance Plan worked. But if I installed SQL Server 2005 Enterprise and then SP2 directly (skipping SP1), the Check Database Integrity in Maintenance Plan was not working. The error message is as follows:
Executed as user: DomainSqlServiceAccount. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 64-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 10:56:21 AM Could not load package "Maintenance PlansTest Plan" because of error 0xC0014062. Description: The LoadFromSQLServer method has encountered OLE DB error code 0x80004005 (Login failed for user ''. The user is not associated with a trusted SQL Server connection.). The SQL statement that was issued has failed. Source: Started: 10:56:21 AM Finished: 10:56:21 AM Elapsed: 0.047 seconds. The package could not be loaded. The step failed.
Other tasks like Rebuild Index seem to be fine. SP2 is supposed to be inclusive. Does anyone have any ideas on why this is happening.
I am using a SSIS package to import the .xml data file from FTP location and process them into SQL Server DB by using Stored Procedures. I am using FTP Task to retrieve the file from FTP location but it only works when ever internet is available otherwise it fails, I placed this package as a SQL Server Agent Job. Can anybody tell me the way to check the CONNECTION before FTP Task start its process to avoid the errors???
Please see the error below which I get from SQL Server Agent:
"Description: Failed to decrypt protected XML node "DTSroperty" with error 0x80070002 "The system cannot find the file specified.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2007-12-19 04:00:03.66 Code: 0xC001602A Source: AA_Trans Connection manager "FTP Connection Manager" Description: An error occurred in the requested FTP operation. Detailed error description: The password was not allowed . End Error Error: 2007-12-19 04:00:03.67 Code: 0xC002918F Source: FTP AA Transactions Receive FTP Task Description: Unable to connect to FTP server using "FTP Connection Manag... The package execution fails"
Let me apologize in advance for what I know is a very basic question, but so far I'm not being terribly successful trying to find sample code to learn from.
I'm trying to write (my first!) .Net Script in SSIS to check for the existance of a file (since that seems to be the only way to do it).
I've created the Script Task, with the following settings:
PrecomplieScriptIntoBinaryCode = False (it complained at one point in time (possibly on validation))
Let me apologize in advance for what I know is a very basic question, but so far I'm not being terribly successful trying to find sample code to learn from.
I'm trying to write (my first!) .Net Script in SSIS to check for the existance of a file (since that seems to be the only way to do it).
I've created the Script Task, with the following settings:
PrecomplieScriptIntoBinaryCode = False (it complained at one point in time (possibly on validation))
Hi,What methods can we use to check the integrity problems? Some records in mydatabase are having Foreign Keys but the database doesn't have any relatedrecords with required Primary Keys. I need to scan the whole database anddelete (maybe with backup, maybe not) all wrong records.Who can I do that? Is it need to write my own application to do that or wehave some standard way to fix these problems? I'm not a databaseadministrator and don't know these ways (yet). Can somebody help me withadvice?Thanks.Dmitri Shvetsov
I have a database in the 3rd normalized form. There is a need to load rows into a child table. To avoid having to drop RI, an ALTER TABLE WITH NOCHECK is being used. I am looking for a way to verify the integrity after the load is complete. After the load an ALTER TABLE WITH CHECK will be executed. Can I used DBCC to verify, that no orphaned child rows were loaded? If so, which parms would I have to use with DBCC?
Currently having some issues with my laptop. I'm no computer expert / programmer so please bear with me.
It is a Vista Home Premium based machine that was purchased about 6 months ago. I'm having issues with an application that relies on WDAC to work. The application worked perfectly in the past and I just recently tried to use it again and it doesn't get past the "Loading Application" screen.
From the company website, they make it clear that anyone using the software has to make sure to run the Windows update to bring the DOT NET framework and MDAC to their latest revisions.
Now, I know that MDAC has been replaced by WDAC to run under Vista. However, I learned that only after trying, for a completely different reason, to install MDAC 2.8 SP1 (I know, dumb idea).
All this to end up saying I'm pretty sure something was screwed up in my WDAC when I tried installing MDAC. I would like to know if there is any way to verify the WDAC installation integrity, basically a Microsoft Component Checker equivalent under Vista.
I set up a test database to try and understand table partitioning. Since deleting the partition schemas, functions and all relevant info on the database properties page, I am getting the following errors during the weekly database integrity check:
Msg 8914, Level 16, State 1, Line 1 Incorrect PFS free space information for page (1:223) in object ID 60, index ID 1, partition ID 281474980642816, alloc unit ID 71776119065149440 (type LOB data). Expected value 0_PCT_FULL, actual value 100_PCT_FULL.
I found the following error in my maintenance plan please help me on this
Under maintenace plan history i found this error:-
[Microsoft SQL-DMO (ODBC SQLState: 42000)] Error 1934: [Microsoft][ODBC SQL Server Driver][SQL Server]UPDATE STATISTICS failed because the following SET options have incorrect settings: 'QUOTED_IDENTIFIER'.
and jobs failed with following error
i found this error in job history of optimization & integrity check jobs:-
Executed as user: XXXXadmin. sqlmaint.exe failed. [SQLSTATE 42000] (Error 22029). The step failed.
Now I'm trying to implement logic to check if excel file is opened or not if open send out email in Script task. Using c#
I'm using this one but it's not working fine. always give me file is opened
public void Main()        {            Boolean FileLocked = true;                // Check if the file isn't locked by an other process                   try
I have huge data and i am loading data from EXCEL to database table, after loading 80 percent data i am getting some error. My package got failed and it has lots of transformation and took around 6 hours to process completely because of that i don't want it to reload from start. if i run it again it should start from next record from where i got the error.
Hi Friends, I am Ravi, I need a help. My case is like.. i need to upload data from csv file into sql server 2005 data table. but before that I need to check integrity of data for example: let us say csv data is like ISD CODE,STATE,NAME,QUALIFICATION 91,AP,KIRAN,MCA 01,MC,MIKE,MS
here i have to check that, wether there is an entry in ISD codes table for 91 and 01 (india and us) similarly AP , MC (Andhra Pradesh and MISSICippi) please suggest me a nice approach, no of records in ISD codes and States will 350-450 records.
This is less of a specific question and more of a request for for some advice as to possibilities and directions. Here's the current situation. My company is using SAP for its purchasing, inventory, etc. This system is pretty much opaque to me - it's managed by another group within the company, and changes to it go through a complicated approval process. At the same time, the majority of our users, internal and external, are looking at this same data through a more accesible and more user friendly collection of web applications - done in classic ASP, up through ASP.NET 1.1 and 2 - and stored in an assortment of MS-SQL 2000 databases. Data is exchanged between SQL and SAP via DTS packages, some nightly, some run more frequently.
There's some issues here - data is never quite synchronized between the two sides, sometimes the same data must be updated twice, leading to possible data integrity issues, etc. Given that, we're going to be moving to SQL 2005 within the next year or so. From everything I've understood, within that context, there are vastly better ways of dealing with out situation than the way we're currently doing it.
So what I'm looking for is just a general impression of what can be done, with SSIS and SAP. Any approaches that might prove more fruitful, an y pitfalls to watch out for, that sort of thing.
I'm fully supportive of the product Feedback Center initiative and the subsequent withdrawal of sqlwish.
Problem is, if nobody ever gives us feedback on the things that we submit then it simply is a glorified version of sqlwish with no added value.
I apologise if there are plans afoot to address to offer feedback to the things we put up there but I (and others) have been freely submitting bugs and suggestions for a few months now without hearing anything back and I'm beginnign to wonder why we bother.
Even a simple "This is a good idea and will be considered for Katmai" or "This is a terrible idea now go and stick your head back in the sand" would be better than a cut and pasted response which is just about all I've seen so far.
I would like some critic or feedback on the attach database design.
The one that I am focusing on is : item_id in fr_item table.
I would like to have a central place where from the web it will have id that map to file, posting and map.
I have three tables fr_file, fr_post, fr_geo which map to fr_item. My question is : 1. Is it good idea to have additional file_id, geo_id, post_id in fr_file, fr_post,fr_geo (as primary key) INSTEAD OF directly put item_id without file_id, geo_id or fr_file.
Hi everyone Can any one help me I am using Tranfer databse object task when I am trying to run it its throwing exception can not send null value in login name????
Help anyone!! I fighting with the same error. I've tried all the suggestions on the web and more. Nothing seems to work. Has anyone found an answer from Microsoft?
Error: The Execute method on the task returned error code 0x80131500 (ERROR : errorCode=-1073548784 description=Executing the query "EXEC dbo.sp_grantdbaccess @loginame = N'sctcsssoadmin', @name_in_db = N'ssoadmin' " failed with the following error: "User, group, or role 'ssoadmin' already exists in the current database.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. helpFile= helpContext=0 idofInterfaceWithError={8BDFE893-E9D8-4D23-9739-DA807BCDC2AC}). The Execute method must succeed, and indicate the result using an "out" parameter.
