Fetching Case Sensitive Data From The Database

Apr 7, 2008

S/W Technologies : C#.Net 2005, ASP.Net 2005, SQL Server 2005

Greetings everyone,

       Heres my code for login verification, which is written in the login button click.

SqlCommand cmd = new SqlCommand("Select uid,pass from UserRegistration where uid='" + txtuname.Text + "' and pass='" + txtpass.Text + "'", con);

con.Open();

dr = cmd.ExecuteReader();

if (dr.HasRows) {  <code......> }

     Now, my problem is, the SQL Server 2005 is fetching rows without checking case. For e.g. if I enter a password as "MYSTERY" or "mystery" which is stored as "Mystery" in the database. The datareader shows positive in HasRows property. So, Can someone suggest me how to fetch case sensitive data from SQL SERVER 2005. Thanks.

View 3 Replies


ADVERTISEMENT

Restore Of Case Insensitive Database To A Case Sensitive Database - SQL Server 2000

Jul 20, 2005

Yesterday I received a response to my CI/CS Collation problem and therecommendation was to try and restore a CI Collation database to a CSCollation database. After creating a blank CS database a full restore(Force restore over existing database) does change the Collation toCI. I'm unsure as to how I can restore without changing theCollation. Any suggestions?

View 2 Replies View Related

HELP! Case Insensitive Database On Case Sensitive Server

Aug 17, 2005

We need to install CI database on CS server, and there are some issueswith stored procedures.Database works and have CI collation (Polish_CI_AS). Server hascoresponding CS collation (Polish_CS_AS). Most queries and proceduresworks but some does not :-(We have table Customer which contains field CustomerID.Query "SELECT CUSTOMERID FROM CUSTOMER" works OK regardless ofcharacter case (we have table Customer not CUSTOMER)Following TSQL generate error message that must declare variable @id(in lowercase)DECLARE @ID INT (here @ID in uppercase)SELECT @id=CustomerID FROM Customer WHERE .... (here @id in lowercase)I know @ID is not equal to @id in CS, but database is CI and tablenames Customer and CUSTOMER both works. This does not work forvariables.I suppose it is tempdb collation problem (CS like a server collationis). I tried a property "Identifier Case Sensitivity" for myconnection, but it is read only and have value 8 (Mixed) by default -this is OK I think.DO I MISS SOMETHING ????

View 4 Replies View Related

Doing A Case-sensitive Query In A Case-insensitive Database

May 29, 2008

I am working in a SQL server database that is configured to be case-insensetive but I would like to override that for a specific query. How can I make my query case-sensitive with respect to comparison operations?

Jacob

View 5 Replies View Related

Make Database Case Sensitive

Apr 25, 2007

How can I make my existing database case sensitive.
How to make SQL Queries also case sensitive from Application

ie:while running from VB,

Should work
rs.open"Select * from Employees"

Should Not work
rs.open"Select * from employees"
error should come as invalid table name.

View 8 Replies View Related

DB Design :: Case Sensitive Database

Jun 19, 2015

I have attached a database to my server.

I just found out that it is case sensitive.

The model database is case insensitive.

Is this setting set when I attached the database?

View 3 Replies View Related

Data In Sqlserver Is Not Case Sensitive

Aug 28, 2006

I am facing problems as the data in sqlserver is not case sensitive. The data in parent key may be capital/lower case and the same data in the child table may be lower/capital case. While migrating the data from sqlserver database to other databases(like oracle) its giving error as the data not found in parent key, though the data found in parent table . This is just because the case sensitive in oracle. But according to my knowledge its better if the sqlserver also supports data case sensitive.

Take a small example
Need a table to store all the alphabets in a table
the table structure is

CREATE TABLE [dbo].[ALPHABET] (
[Alphabet] [varchar] (1) NOT NULL ,
[Description] [varchar] (50) NOT NULL
)
GO

The data is








Alphabet
Description

a
Small a

b
Small b

C
Capital C

A
Capital A

sqlserver wont allow to insert data 'A' and gives error "voilation of primary key", though a & A are different according to this table.

I tried with NVARCHAR datatype also. The same problem here also. Sqlserver atleast should support data case sensitivity for NVARCHAR datatype as this can store different languages. May be in other languages the entire meaning may be differ with case differences. Even in english language some words meaning will differ with case differences. For reference can refer english dictionary

View 1 Replies View Related

How To Make Sql Server Data Case - Sensitive?

Feb 25, 2008

Hii



I transferred data from Oracle to sql server 2005. Now what i want is to make data in the tables case-sensitive .(it has to be data inside the tables only and not table and column names).
what i tried is :


alter database test collate Latin1_General_CS_AS

But to my horror it made the tables name case-sensitive .
Plz help me out asap.


Thanx in advance
Supriya

View 18 Replies View Related

SQL Server 2008 :: Change Text Format From Case Sensitive To Case Insensitive?

Aug 31, 2015

How can I change my T-SQL text editor from text sensitive to text insensitive?

View 2 Replies View Related

Case Insensitive Searching In Sql Server 2000 When It's Case Sensitive

May 4, 2007

Can someone point me to a tutorial on how to search against a SQL Server 2000 using a case insensitive search when SQL Server 2000 is a case sensitive installation?
 
thanks in advance.

View 3 Replies View Related

Can You Use Replication From A Case Sensitive Db To A Case Insensitive Db?

Aug 19, 2007

I am curious with using replication in sql server 2005 one way from db A (source) replicating to db B(destination) in which db A has a collation of CS and db B has a collation of CI.  Will there be any problems with this scenario? Thanks in advance! 

View 2 Replies View Related

Case Sensitive?

Mar 21, 2004

Dear everyone,

I am doing Login webform (C# .NET web application) with SQL Server 2000.

The staff table is to store authenticated user info.

But when I test it, I found that the password can be case insensitive, i.e. 'A0001' should be correct password, but 'a0001' can allow login.

Could anyone tell me how to solve this problem??

Thanks you very much!!


private void btnLogin_Click(object sender, System.EventArgs e)
{
//instantiate SQL connection
SqlConnection sqlConnect = new SqlConnection(connectStg);
SqlCommand selectLogin = sqlConnect.CreateCommand();

selectLogin.CommandText = "SELECT sid, type from STAFF Where sid= '" + txtId.Text + "' and pwd= '" + txtPwd.Text + "' ";


//open connectin for execution
sqlConnect.Open();

//instantiate the SqlDataReader reader
SqlDataReader loginReader = selectLogin.ExecuteReader();

//try and catch SqlException error
try
{
if(loginReader.Read())
{

// check whether the user is the role of administrator or operator
// I use GetValue(1) i.e. type field from the above select statement // if "O' then go operator page, else go to administrator page.
if (loginReader.GetValue(1).ToString().ToUpper().Equals("O"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginOper.aspx");

}
else if (loginReader.GetValue(1).ToString().ToUpper().Equals("A"))
{
Server.Transfer("//SMS/LoginUser/SuccessLoginAdmin.aspx");
}

}

else
{
//clear content of textbox and display error message
txtId.Text="";
txtPwd.Text="";
lblLoginFail.Visible = true;
lblLoginFail.Text="Login Failed!<br>" + "Ensure that ID and Password are correct!";
}

}
catch (SqlException se)
{
if (se.Number == 17)
{
lblLoginFail.Visible = true;
lblLoginFail.Text = "Could not connect to the database";
}

else
{
lblLoginFail.Visible = true;
lblLoginFail.Text = se.Message;
}

}

//close SqlDataReader and SqlConnection
loginReader.Close();
sqlConnect.Close();

View 5 Replies View Related

Case Sensitive Sql

Jul 6, 2005

Hi

how can i use the sensive case in a select field from table where fild='GhhY' ?

View 2 Replies View Related

Case Sensitive...

Aug 15, 2002

are SQL Server 7 table names, column names case sensitive?

View 2 Replies View Related

Case Sensitive

Feb 13, 2001

In SQL Server 7.0, how do you SELECT a column which has values beginning with only lower case letters
can anyone advise?

View 1 Replies View Related

Case Sensitive

Feb 15, 2001

Hi,

I want to change my database character set and I use database SQL Server 6.5.
At the first time I install database, I use charset type to case sensitive.
Now, I want to change this charset from case sensitive to un case sensitive.

I hope somebody want to trasnfer knowledge about it.
Thanks for attention.

Regards,

Susan

View 1 Replies View Related

Case Sensitive

Apr 24, 2007

Hi,
I am using SQL Server 2000.
How to make case sensitive of a database.

Eg :
Should work
Select * from Employees
Select * from Employees where Title like 'S%'

Should not work
select * from employees
select * from employees where title like 's%'

Thanks in advance.

View 7 Replies View Related

Case Sensitive SQL - Pls Help A Noob

Feb 5, 2005

I just created my first Asp.net app. I had to install it to a corporate server. What I found is that the corporate SQL Server 2000 was case sensitive in the stored procedures while my installation was not!
How can I set my SQL Server 2000 to be case sensitive as well?

View 1 Replies View Related

Case-sensitive Search

Aug 21, 2001

Hi all,
There is a requirement to perform a case-sensitive search
on a column in table. The installation of SQL Server is
case-insensitive...
Eg.: select * from t1 where c1 = 'abcd'
should return only rows where c1 = 'abcd' and not 'ABCD'
or 'Abcd' or any other.

I understand that this can be done using the CONTAINS
predicate using Full-text indexing.
select * from t1 where CONTAINS(c1,'abcd')

Is this the right solution to the problem? Has someone
had experience implementing this?

Thanks in advance.
-Praveena

View 1 Replies View Related

Case Sensitive Queries

Jul 26, 2000

Our database is configured as case insensitive. I need to run a query which is case sensitive. Is there a query option or function I can use to compare, taking upper/lower case into consideration?

Regards,

Gavin Patterson

View 7 Replies View Related

Case-sensitive Passwords?

Mar 10, 2000

Is it possible in SQL Server 7.0 sp1 to have a
password that is case-sensitive on a case-insensitive
installation of SQL server?

Toni

View 1 Replies View Related

Case Sensitive Option !!!!!!!!!!!

May 20, 2002

How do you set the case sensitive option in SQL 2000? If l already have data in the database whats the best way of doing this.l want the selects on the database to be case sensitive?

View 3 Replies View Related

Case Sensitive Vs Insensitive

Jul 2, 2004

After all the pain I've been going through with code pages and collation, I was asked how, when sql server does it's joins and predicate searches, how does it actual (internals now) know the an "A" = "a" in an insensitive search?

I didn't have the answer.

Damn, Now I really have to pick up Kelans book.

View 14 Replies View Related

SQL Passwords ARE Case-sensitive, Right?

Oct 27, 2004

I'm a bit flummoxed on this one (doesn't take much these days). We have a test SQL database and a prod SQL database configured with the same user name and a complex password.

The password consists of letters and numbers, mixed upper and lower.

What I am seeing, however, is that SQL will permit access even if the user gets the case wrong on the letters. One letter, two letters, all letters. It doesn't matter.

I thought SQL passwords were case sensitive; was I wrong?

Regards,

hmscott

Edit: I should add that I am running SQL 2000, SP3a (hotfix 0818) on Windows 2000 SP4 and that SQL is clustered on two servers in Active/Passive mode (this applies to both Test and Prod).

View 4 Replies View Related

Case Sensitive Sql Server

Oct 13, 2006

in sql server 2000 or 2003 how can i tell if a database is case sensitive or not??

View 2 Replies View Related

Sql Server Case Sensitive?????????

Aug 31, 2006

hi friends, is it possible to make sqlserver case sensitive?
i mean is there any options to set while installation?

thank you very much

View 3 Replies View Related

Case-sensitive Search In Sql 7

Jul 20, 2005

Hi,I have yet to find an answer for this:I want to do a case-sensitive query using "like" on a table in sql 7.Currently, "like" performs case-insensitive query.I understand that you can use the following query in sql 2000:SELECT *FROM table_xWHERE col1 collate SQL_Latin1_General_CP1_CS_AS LIKE '% AVE %'However, is there a similar method for sql 7?Any answer would be appreciated.Thanks,Jay

View 1 Replies View Related

ADO Case-sensitive Filter

Aug 7, 2007

Using ADO 2.7, what is the best way to perform a case-sensitive filter? I have seen on other forums where folks have said that the StrComp function can be used inside of the .Filter method, but I haven't been able to get that to work. I am using VB 6 and ADO 2.7, and have a need to perform case sensitive filters. I know I am not the ony one who has needed to do this...

As always, your time is appreciated.

View 4 Replies View Related

SQL Changing To Case IN-Sensitive?

Jul 19, 2007

We did some hardware work on our server, after reinstalling the OS and SQL we reattached our DB.



Now it appears as if SQL is set up as case sensitive and our application is crashing.



How do I make SQL Case insensitive once it is installed?

View 1 Replies View Related

Case-sensitive Security

Nov 8, 2007

In the process of migrating from SQL Server 2000 to SQL Server 2005, an application that auto-generates reports suddenly started failing. It turned out that the usernames and passwords were being up-cased, and SQL Server authentication on the 2005 box was rejecting the logons. When the app was changed to leave credentials in whatever case they were received, the reports all ran successfully.

Is that case-sensitivity a function of the collation schema on the database? On the entire SQL Server installation?

Either way, how can it be changed to be case-insensitive for such credentials?

Thnx!
Phil

View 3 Replies View Related

How To Select A Case Sensitive Value In SQL With C#

Feb 11, 2006

Hello,

I have an application that at the begining a user will login with a user name and password which is stored in the database. The SQL statement is as follows:

"SELECT id_employee FROM employee WHERE employee_number='" + txtUserName.Text + "' AND passWord='" + txtPassword.Text + "'";

For testing purposes I have set the password to the word test. The problem is, if the user enters in TEST or TeSt or TESt it will grant them access. How do I set it to force the correct case?

I am using SQL 2005 for the database.

Thanks!

~zero

View 11 Replies View Related

How To Do Case-sensitive Search

Mar 28, 2006

say, in my database there're two rows,

name age career
------------------------

dave 20 student
Dave 20 student

if i use select * from db where name='dave'

both will come out, how to do a case-sensitive that i got only the 1st row ?

View 8 Replies View Related

PIVOT Is Not Case-sensitive

Oct 27, 2006

Hi there,

I am using a PIVOT to count the number of chunk for each block type:
ex.:
block_type, chunk
a, <data>
a, <data>
b, <data> ...

My problem is that the block_type is case-sensitive, 'a' should not be counted as a 'A'.
How can I take the case in consideration?

I've tried to plug a COLLATE SQL_Latin1_General_CP1_CS_AS statement but it doesn't seem to be supported... Something like:
SELECT *
FROM recv.test_Blocks
PIVOT (
COUNT(chunk)
FOR block_type COLLATE SQL_Latin1_General_CP1_CS_AS
IN ([9.], a, B, h, q)
) AS pvt

Also something like:
IN (a, A)
returns an error: The column 'A' was specified multiple times for 'pvt'.

Thanks

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved