Hi All,
A general question for you.
Does QSL replication work on a row by row basis or field by field.
e.g.
One user updates a field in row a on his table
a different user updates a different field on the same row (row a) on his table 10 secs later.
Does the first user's chnage get overwritten or will both chnages be kept?
Which model would I need for this?
Thanks
1. Can someone tell me how to replicate the identity field.
2. When I use the 'NOT FOR REPLICATION' option, I keeps getting synx error. Here is the command:
alter table tusers alter column {userid INT} IDENTITY (1, 1) [NOT FOR REPLICATION]. Do you know why?
3. When I use the transaction replication wizard, why some of the table do not allow me to replicate(There is a key and cross symbol on the articles selection)?
Thanks
I have a table that has a TEXT field and I want to replicate it. It already has a primary key field in it. I read that in SQL Server 6.5, you can do transactional replication on a table that has a TEXT field in it. I'm wondering if I need to do any other special configuration to replicate this table, i.e. enable the truncate on checkpoint option or anything else? Thanks, Hoang
View 1 Replies View RelatedDoes anyone know if there is a limit to the number of fields you can replicate from one table ??
View 1 Replies View RelatedI am trying to replicate tables in a sql server 6.5 which contain the timestamp field. An error occurs and it shuts the replication task off and it says it cannot update the timestamp field. If I choose vertical partitioning and do not replicate the timestamp field then an error occurs that insert value list does not match column list. Is it the case that the subscriber cannot have this field in the table?
Besides deleting the timestamp field from the table completely, is there another solution or am I forgetting to set something?
I have to modify field length in the table, which is part of publication. I tried to use an Enterprise Mgr and received an error message because that table is scheduled for replication.
Is any way around this beside temporary stopping and restarting replication? And actually how to do this to be sure that after restart the data will be again in sync.
We have SQL Server 2000 Enterprise Edition and Windows 2000 Advanced Server.
Hi,
I have been running a merge publication & 4-5 subscriber all running perfectly good, but today I started getting this error below? I generated a new dynamic snapshot and re init the subscriber, but still the same. I synchronized the other subscribers and they are all running with no errors, even after a init. I.E. I would think this is data related, to this subscriber, but I have no further ideas how to track it down?
any ideas?
Regards
Gert Cloete
bcp "conCORD_ODS"."dbo"."MSmerge_contents" in "\OBSQL2005\ConcordReplData\MERCURYSQLEXPRESSOBSQL2005$DEV_CONCORD_ODS_CONCORD_ODSMSmerge_contents90_forall.bcp" -e "errorfile" -t"<x$3>" -r"<,@g>" -m10000 -SMERCURYSQLEXPRESS -T -w
To obtain an error file with details on the errors encountered when initializing the subscribing table, execute the bcp command that appears below. Consult the BOL for more information on the bcp utility and its supported options.
End of file reached, terminator missing or field data incomplete
Field size too large
The process could not bulk copy into table '"dbo"."MSmerge_contents"'.
The merge process was unable to deliver the snapshot to the Subscriber. If using Web synchronization, the merge process may have been unable to create or write to the message file. When troubleshooting, restart the synchronization with verbose history logging and specify an output file to which to write.
Hello I currently have a merge replication set up with 4 subscribers. A primary field for one of my tables is set to a integer indetity.
What Ive noticed is that depending on which database I enter data into, the indentity field (primary key) is set within a certain range I.e
On Server 1 - Values start from 1 then 2,3,4 etc etc
Server 2 - 24001, 24002, 24003 etc etc
Server 3 - 46001, 46002, 46003 etc etc
Server 4 - 68001, 68002, 68003
My question is what happens when these ranges eventually conflict? Do they automatically gain a different range such as 142 001, 142 002 etc etc?
Ive tried looking in SQL Help, and a quick search here, Im just after some confirmation before I implement this to my app.
cheers
Hi,
If i were to replicate a database with another where in both the databases have an auto incrementing field. What could be the problems that's goin to arise out of it. How to deal with such a scenario...?????
I've got two databases on the same server and replicate some tables from one database to another.The replication is configured so not to drop the table if it exists, but to delete the data based on the filter if one exists. There are two tables on the subscriber that have some extra columns.
I get "field size too large" error when trying to replicate them. Is there a workaround without having to make the publisher and the subscriber tables identical by schema?
I'm new to SQL and I'm trying to write a statement to satisfy the following:
If [Field1] contains text from [Field2] then return [Field3] as [Field4].
I had two tables where there were no matching keys. I did a cross apply and am now trying to parse out the description to build the key.
Good morning...
I begin with SQL, I would like to add a field that will be date like 21/01/2000.
Actually i find just "datetime" format but give me the format 21/01/2000 01:01:20.
How to do for having date and time in two different field.
Sorry for my english....
Cordially
A newbie
I'm using DTS to import data from an Access memo field into a SQL Server ntext field. DTS is only importing the first 255 characters of the memo field and truncating the rest.I'd appreciate any insights into what may be causing this problem, and what I can do about it.Thanks in advance for any help!
View 4 Replies View RelatedI need to pass in null/blank value in the date field or declare the field as string and convert date back to string.
I tried the 2nd option but I am having trouble converting the two digits of the recordset (rs_get_msp_info(2), 1, 2))) into a four digit yr. But it will only the yr in two digits.
The mfg_start_date is delcared as a string variable
mfg_start_date = CStr(CDate(Mid(rs_get_msp_info(2), 3, 2) & "/" & Mid(rs_get_msp_info(2), 5, 2) & "/" & Mid(rs_get_msp_info(2), 1, 2)))
option 1
I will have to declare the mfg_start_date as date but I need to send in a blank value for this variable in the stored procedure. It won't accept a null or blank value.
With refresh_shipping_sched
.ActiveConnection = CurrentProject.Connection
.CommandText = "spRefresh_shipping_sched"
.CommandType = adCmdStoredProc
.Parameters.Append .CreateParameter("ret_val", adInteger, adParamReturnValue)
.Parameters.Append .CreateParameter("@option", adInteger, adParamInput, 4, update_option)
.Parameters.Append .CreateParameter("@mfg_ord_num", adChar, adParamInput, mfg_ord_num_length, "")
.Parameters.Append .CreateParameter("@mfg_start_date", adChar, adParamInput, 10, "")
Set rs_refresh_shipping_sched = .Execute
End
Please help
I embedded a SQL query in excel that gets some datetime fields like "TASK_FINISH_DATE" .
How can I convert a datetime field to a date field in SQL in a way that excel will recognize it as a date type and not a text type?
I tried:
CONVERT(varchar(8),TASK_FINISH_DATE ,3)
CONVERT(Date,TASK_FINISH_DATE ,3)
CAST(TASK_FINISH_DATE as date)
**all of the above returned text objectes in excel and not date objects.
I am trying to drag data from Informix to Sql Server. When I kick off the package
using an OLE DB Source and a SQL Server Destination, I get DT_DBDATE to DT_DBTIMESTAMP
errors on two fields from Informix which are date data ....no timestamp part
I tried a couple of things:
Created a view of the Informix table where I cast the date fields as datetime year to fraction(5), which failed.
Altered the view to convert the date fields to char(10) with the hopes that SQL Server would implicitly cast them
as datetime but it failed.
What options do I have that will work?
Hi ,Have a Visual C++ app that use odbc to access sql server database.Doing a select to get value of binary field and bind a char to thatfield as follows , field in database in binary(16)char lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_C_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);and this works fine , however trying to move codebase to UNICODE antested the followingWCHAR lpResourceID[32+1];rc = SQLBindCol(hstmt, 1, SQL_W_CHAR,&lpResourceID,RESOURCE_ID_LEN_PLUS_NULL , &nLen1);but only returns 1/2 the data .Any ideas , thoughts this would work fine , nit sure why loosing dataAll ideas welcome.JOhn
View 2 Replies View RelatedDECLARE @datetimeoffset datetimeoffset(3)
DECLARE @datetime datetime
SELECT @datetimeoffset = '2012-11-08T17:22:13.575+00:00'
SELECT @datetime = @datetimeoffset
SELECT @datetimeoffset AS '@datetimeoffset ', @datetime AS 'datetime'
__________________________________________________ ___________
Result of above SQL is
@datetimeoffset datetime
2012-11-08 17:22:13.575 +00:002012-11-08 17:22:13.577
__________________________________________________ ____________
The result should be '2012-11-08 17:22:13.575', why the milliseconds value is incorrect
Hi,another problem I have is that have compounded fields in my sql table.Exampleproduct@customerI need a simple function to return "customer", so it should return the valueafter "@", unfortunate "@" will sometimes be character number 6, sometimescharacter number 7 etc.regardsJorgen
View 1 Replies View RelatedI have a very strange situation. I've increased the size of an NVARCHAR field from 8 to 9 in a database table. The format of the data that I enter will either be an 8 character field (123456-8) or a 9 character field (1234567-9). The '-' is critical.
It used to only accept the 8 character version, but after increasing the field size, if I try to insert the 9 character field version, it gets truncated after the '-', as though it's still only allowing 8 characters. But that only occurs when I include the '-' or other such characters like '#'. If I try to insert 1234567a9, it works. The following explains the outcomes:
Inserted Value -> Result in table
123456-8 -> 123456-8 *Correct
1234567-9 -> 1234567- *Wrong
123456789 -> 123456789 *Correct
1234567#9 -> 1234567# *Wrong
1234567a9 -> 1234567a9 *Correct
Why is it that characters such as '-' and '#' are truncating the value, but only if the string is 9 chars long?
I'm currently using a direct t-sql insert statement in SQLExpress. The field is a simple NVARCHAR(9) field.
How can I format the background color of a data-region field when I just want it to be "silver" If it is a subtotal value???
View 3 Replies View RelatedI need create a field to store tax rate. I need only 2 decimal points. I defined the field as decimal, precision=5 and scale=2. Does it mean that it can hold value from 0.00 to 999.99?
View 12 Replies View RelatedHi,
I'm importing an Access database to SQL Server 2000.
The issue I ran into is pretty frustrating... All Memo fields that get copied over (as Text fields) appear to be fine and visible in SQL Server Enterprise Manager... except when I display them on the web via ASP - everything is blank (no content at all).
I didn't have that problem with Access, so I ruled out the possibility that there's something wrong with the original data.
Is this some sort of an encoding problem that arose during database import?
I would appreciate any pointers.
We have a stock code table with a description field and a brand field - when the data was entered, some of the records were entered with the brand field in the description field.
ie.
Code Description Brand
ABC1 BLANK DVD SONY
ABC2 SONY BLANK DVD SONY
what I need to do is identify where the Brand is in the Description field ...
I have tried ;
select * from Table
where Description Like Brand
not very successful.
I want to update a field with a trigger only if a specific field is updated.
When I try the code below, it updates the field when any field in the record is updated. Is there a way to only make look at picked_dt?
ALTER TRIGGER [dbo].[UpdatePickedDate]
on [dbo].[oeordlin_sql]
after update
AS
BEGIN
-- SET NOCOUNT ON added to prevent extra result sets from
[Code] .....
i want to import/copy a varchar field numeric data in to number field pls suggest the solution
one thing more can i convert field type of a table how?
jto it
I have a table called BidItem which has another table calledBidAddendum related to it by foreign key. I have another table calledBidFolder which is related to both BidItem and BidAddendum, based on acolumn called RefId and one called Type, i.e. type 1 is a relationshipto BidItem and type 2 is a relationship to BidAddendum.Is there any way to specify a foreign key that will allow for thedifferent types indicating which table the relationship should existon? Or do I have to have two separate tables with identical columns(and remove the type column) ?? I would prefer not to have multipleidentical tables.
View 26 Replies View RelatedI am trying to populate a field in a SQL table based on the valuesreturned from using substring on a text field.Example:Field Name = RecNumField Value = 024071023The 7th and 8th character of this number is the year. I am able toget those digits by saying substring(recnum,7,2) and I get '02'. Nowwhat I need to do is determine if this is >= 50 then concatenate a'19' to the front of it or if it is less that '50' concatenate a '20'.This particular example should return '2002'. Then I want to take theresult of this and populate a field called TaxYear.Any help would be greatly apprecaietd.Mark
View 2 Replies View RelatedI know there has to be a way to do this, but I've gone brain dead. Thescenario..a varchar field in a table contains a date range (i.e. June 1,2004 - June 15, 2004 or September 1, 2004 - September 30, 2004 or...). Theusers have decided thats a bad way to do this (!) so they want to split thatfield into two new fields. Everything before the space/dash ( -) goes intoa 'FromDate' field, everything after the dash/space goes into the 'ToDate'field. I've played around with STRING commands, but haven't stumbled on ityet. Any help at all would be appreciated! DTS?
View 1 Replies View RelatedHi all,
i've a reasonable amount of experience with MS Access and less
experience with SQL Server. I've just written an .NET application that
uses an SQL Server database. I need to collate lots of data from around
the company in the simplest way, that can then be loaded into the SQL
Server database.
I decided to collect the info in Excel because that's what most people
know best and is the quickest to use. The idea being i could just copy
and paste the records directly into the SQL Server database table (in
the same format) using the SQL Server Management Studio, for
example.
Trouble is, i have a problem with line feed characters. If an Excel
cell contains a chunk of text with line breaks (Chr(10) or Chr(13))
then the copy'n'paste doesn't work - only the text up to the first line
break is pasted into the SQL Server database cell. The rest is not
pasted for some reason.
I've tried with MS Access too, copying and pasting the contents of a
memo field into SQL Server database, but with exactly the same problem.
I've tried with 'text' or 'varchar' SQL Server database field formats.
Since i've no experience of using different types of databases
interacting together, can someone suggest the simplest way of
transferring the data without getting this problem with the line feeds?
I don't want to spend hours writing scripts/programs when it's just
this linefeed problem that is preventing the whole lot just being
cut'n'pasted in 5 seconds!
cheers
Dominic
Hello,
I have a table with a column that is currently a varchar(50), but I want to convert it into an int. When I try to just change the type in design mode I get an error that conversion cannot proceed. When I look at the field it appears some of the entries have special characters appended at the end, I see a box after the value.
How can I remove all speical characters and then convert that field to an int?
Also I tried the following query which did not work as well, same error about conversion.
UPDATE myTable SET field = CAST(field AS int)
Hi,
Can anyone point me any solution how to export a MEMO field from an Access database to a TEXT field from an MS SQL Server 2000. The import export tool from SQL server doesn't import these fields if they are very large - around 9000 characters.
Thanks.
I need formulating a view through which I can create a an output like below image -
Monthly Table
NUM STATUS ACTIVITYCODE
HAX603 Completed 0x45845a
HAX317 Completed 0x112z44
HAX465 Completed 0x1155x4
HAX523 Completed 0x124c69
Season Table
NUM STARTMONTH STARTDAY ENDMONTH EMDDAY
HAX603 JULY 1 OCTOBER 31
HAX317 DECEMBER 1 DECEMBER 31
HAX317 MARCH 1 MARCH 31
HAX317 July 1 July 28
[Code] ...
Final Output
NUM STATUS ACTIVITYCODE <SEASONS>
HAX603 Completed 0x45845a 1 JULY - 31 OCTOBER, 1 DECEMBER - 31 DECEMBER
HAX317 Completed 0x112z44 1 DECEMBER - 31 DECEMBER, 1 MARCH - 31 MARCH, 1 July - 30 July
HAX465 Completed 0x1155x4 1 MARCH - 31 MARCH, 1 July - 28 July, 1 August - 30 August
HAX523 Completed 0x124c69 1 November - 30 November
I have written a query to join the values of multiple field, but lacking in as how will I formulate a view which will check for the duplicate values of Num fields and merge there values in a single field like season.
select num, (CAST(startday AS VARCHAR(3)) + ' ' + startmonth + ' - ' + CAST(endday AS VARCHAR(3)) + ' ' + endmonth)AS Season from seasons;