I want execute my package when a set of files exists in a
directory. What is the best way of doing this?
I have been successful in creating a WMI Event Watcher Task
that executes when any file (the first file) is added to a directory. But
I can not figure out the WQL for a specific file or set files.
What have you done with in SSIS to trigger the package?
Thanks
Hi
I need to create a trigger that whenever there is data found in a certain table it must execute a SSIS package. If there is a process in SSIS or a way to manipulate the process to check if there is data and then schedule the package that would also help.
What i've done:
I have an SSIS package that searches for data in a table, copies the data into a flat file and places the file onto a FTP server, which it then renames the file so that the server will accept the flat file once it's in a specific folder, after that it moves the data from the current table to a stage table and truncates the current table.
The Problem:
When there is no data in the table, it creates a 0 bytes file that it puts onto the FTP server which messes things up on that side. All i want to do is put a check on the package to see if there is data before it executes.
Any help or even the slightest bit of information would be of great help.
Kind Regards
Carel Greaves
Hi
While trying to build SSIS Package Project, the following error is thrown. I have added configuration file recently to fetch the dynamic values such as connection string, output path etc.
I tried manually cleaned up the debug folder and tried build but still the error occurs.
Can any one help in suppressing this error?
Error 1 System.ApplicationException: Could not copy file "D:ExportExport.dtsConfig" to the deployment utility output directory "D:ExportinDebug". ---> System.IO.IOException: The file 'D:ExportinDebugExport.dtsConfig' already exists. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.File.InternalCopy(String sourceFileName, String destFileName, Boolean overwrite) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) --- End of inner exception stack trace --- at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CopyFiles(ICollection fileNames, String outputPath) at Microsoft.DataTransformationServices.Project.DataTransformationsProjectBuilder.CreateDeploymentUtility(IOutputWindow outputWindow) 0 0
Thanks in advance,
Prabha
I need to execute a SSIS package from a ".vbs" file on a computer that don't have SSIS installed on it.
Thank You
I am tasked with creating a batch file to execute SSIS packages.
View 3 Replies View RelatedThere are two options to specify the subpackage location (SQL Server or file location). I'd like to know how I can specify a variable name that points to the file location so I avoid hard coding the file location which could change during production installation.
View 4 Replies View RelatedI'm looking for a way to refer to a package variable within any
Transact-SQL code included in either an Execute SQL or Execute T-SQL
task. If this can be done, I need to know the technique to use -
whether it's something similar to a parameter placeholder question
mark or something else.
FYI - I've been able to successfully execute Transact-SQL statements
within the Execute SQL task, so I don't think the Execute T-SQL task
is even necessary for this purpose.
Hi.
I have a master package, which executes child packages that are located on a SQL Server. The Child packages execute other child packages which are also located on the SQL server.
Everything works fine when I execute in process. But when I set the parameter in the mater package ExecutePackageTask to ExecuteOutOfProcess = True, I get the following error
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "Row Count" (5349).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Custom Split" (6399).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "SCR Data Source" (5100).
Error: 0xC00470FE at DFT Load Data, DTS.Pipeline: SSIS Error Code DTS_E_PRODUCTLEVELTOLOW. The product level is insufficient for component "DST_SCR Load Data" (6149).
The child packages all run fine when executed directly, and the master package runs fine if Execute Out of Process is False.
Any help would be greatly appreciated.
Thanks
Geoff.
I have a package that has multiple data flow tasks. At the end of a task, key data is written into a raw file (file name stored in a variable) that is used as a data source for the next task. Each task requires a success from the preceding task.
Here's the rub:
If I execute the entire package, the results of the package (number of records of certain tasks) differs significantly from when I execute each step in the package in turn (many more records e.g. 5 vs 350).
I get the feeling that the Raw file is read into memory before it is flushed by the previous task, or that the next task begins preparation tasks too early.
Any help is greatly appreciated.
I am running on Server 2003 64 (although the same thing happens when deployed on a Server 2003 32 machine)
Thanks
B.
Dear all,
I am deploying programatically an Excel 2007 file to a SQL Server 2005 Reporting Server. The problem is that if a file with the same name already exists, that file isn't replaced. I would like the opposite to happen. I'm using the following code:
--Executable
set svr=http://w3sdwsqld1/reportserver
set src_fld="\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\"
set dest_fld="Associados"
set script="\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
REM Sample: deploy.bat http://w3sdwsqld1/reportserver "\w3sdwsqld1\deploy\SAD\ECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\" "Associados" "\w3sdwsqld1\deploy\SADECRANS\UPDATES_20061127_190000\Ecrans\AM\Associados\PublishReports.rss"
for /R %src_fld% %%f in (*.xlsx) do rs -i %script% -s %svr% -v ParentFolder=%dest_fld% -v reportP="%%~nf" -v path=%src_fld%
PAUSE
--rss Code
'
' Script Variables
'
' Variables that are passed on the command line with the -v switch:
'
' (a) parentFolder - corresponds to the folder that the script creates and uses
' to contain your published reports
' (b) reportP - corresponds to the report to publish
Dim ROOT As String = "/SAD/Ecrans/Ecrans/AM"
Dim definition As [Byte]() = Nothing
Dim warnings As Warning() = Nothing
Dim parentPath As String = ROOT + "/"+ parentFolder
Dim filePath As String = path
Dim report As String = reportP
Public Sub Main()
rs.Credentials = System.Net.CredentialCache.DefaultCredentials
'Create the parent folder
Try
rs.CreateFolder(parentFolder, ROOT,Nothing)
Console.WriteLine("Parent folder {0} created successfully", parentFolder)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
'Create shared data source
'CreateSampleDataSource("Solucao_Integrada", "OLEDB-MD", "Data Source=dwareas1;Initial Catalog=SAD_Solucao_Integrada")
'Publish the sample reports
PublishReport(report)
End Sub
Public Sub CreateSampleDataSource(name As String, extension As String, connectionString As String)
'Define the data source definition.
Dim definition As New DataSourceDefinition()
definition.CredentialRetrieval = CredentialRetrievalEnum.Integrated
definition.ConnectString = connectionString
definition.Enabled = True
definition.EnabledSpecified = True
definition.Extension = extension
definition.ImpersonateUser = False
definition.ImpersonateUserSpecified = True
'Use the default prompt string.
definition.Prompt = Nothing
definition.WindowsCredentials = False
Try
rs.CreateDataSource(name, parentPath, False, definition, Nothing)
Console.WriteLine("Data source {0} created successfully", name)
Catch e As Exception
Console.WriteLine(e.Message)
End Try
End Sub
Public Sub PublishReport(ByVal reportName As String)
Try
Dim stream As FileStream = File.OpenRead(filePath + reportName + ".xlsx")
Console.WriteLine(reportName)
definition = New [Byte](stream.Length) {}
stream.Read(definition, 0, CInt(stream.Length))
stream.Close()
Catch e As IOException
Console.WriteLine(e.Message)
End Try
Try
rs.CreateResource(reportName + ".xlsx", parentPath, True, definition, "application/x-excel", Nothing)
Catch e As Exception
Console.WriteLine(e.Message)
Console.WriteLine("Failed to publish report")
End Try
End Sub
--------------------------------------------------------------------------------------------------------------------
Any thoughts? Many thanks,
Pedro Martins
Portugal
Hi friends,
I have a for each loop that populates from a set of flat files into a Sql Server table, I run the Flat file Import via a dts package embedded into Execute DTS 2000 Task. I want to pass the Sourcefile Name that is fetched by the For Each Loop to assign it Global Variable in DTS. how this can be made ?
Thanks
Subhash Subramanyam
I have a SSIS job, one of the last steps it performs is to execute a SQL 2000 DTS package. This has to be done as a SQL 2000 DTS package as it is performing rebuilds of SQL 2000 Analysis Services dimensions and cubes. We've found that when the DTS fails the SSIS job is happily completing showing as a success, we would prefer to know it went wrong.
As far as I'm aware SSIS merely starts the DTS off and doesn't care about it's result. I've taken a look in to turning on the logging for the execute DTS package and thought that the ExecuteDTS80PackageTaskTaskResult would give me the answer I need...but is merely written to the log not available as an event-handler. It also looks like it is not safe to put a SQL task in as the next item to go look at the SQL 2000 system tables to look at the log for the DTS package as the SSIS documentation warns that the DTS package can continue to run after the execute DTS package task has ended.
Ideally I want any error raised within the DTS package to cascade up to be an error in the SSIS job, I can then handle it appropriately. I cannot find a way to do this. Is there a way?
If not, can anyone suggest how in the remainder of the SSIS tasks I can be sure that the DTS has completed before I start any other tasks that will check for the SQL 2000 log of its execution?
I am having problems executing a child package from a parent package using the Execute Package Task. I am attempting to run the master package through a SQL Server Agent job.
The SQL Server Agent job is owned by sa. The step that runs the parent package is configured to load the package from the SSIS Package Store on the same server that the job is running.
I have the Execute Package Task configured as follows:
Location: SQL Server
ExecuteOutOfProcess: True
Connecting as a SQL Server login (let's say TestEtl)
I have added the db_dtsoperator database role to both the TestEtl login and the login that SQL Server Agent connects through. I have also configured the child package's reader role to include db_dtsoperator. Per http://msdn2.microsoft.com/en-US/library/ms141053.aspx, this should allow these logins to run the child package.
I have enabled logging of all events in both the parent and child packages. I see the following in the logs when the Execute Package Task executes (omitted portions unrelated to the execution of the child package task):
450939 OnPreExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450940 OnPreValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450941 OnPostValidate ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450942 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDataInitialize::GetDataSource'.450943 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDataInitialize::GetDataSource succeeded'. The external request has completed.450944 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBInitialize::Initialize'.450945 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBInitialize::Initialize succeeded'. The external request has completed.450946 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_pre: The object is ready to make the following external request: 'IDBCreateSession::CreateSession'.450947 User: Diagnostic ETL 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 ExternalRequest_post: 'IDBCreateSession::CreateSession succeeded'. The external request has completed.450948 OnError ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450949 OnError ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 Error 0x80070005 while preparing to load the package. Access is denied. . 450950 OnTaskFailed ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450951 OnPostExecute ChildPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450952 OnWarning ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 SSIS Warning Code DTS_W_MAXIMUMERRORCOUNTREACHED. The Execution method succeeded, but the number of errors raised (1) reached the maximum allowed (1); resulting in failure. This occurs when the number of errors reaches the number specified in MaximumErrorCount. Change the MaximumErrorCount or fix the errors. 450953 OnPostExecute ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 450954 PackageEnd ParentPackage 2007-06-08 13:35:17.000 2007-06-08 13:35:17.000 End of package execution.
I am sure that what I am doing is quite common, and I obviously have something misconfigured somewhere - but I'm not sure what my misconfiguration is. Can anyone enlighten me?
I use a execute package task to run a child package in which I run some sql task.
as the error handle I insert a script task and link a line from execute package task to script task
of course the line is red,
but I found when the child package failed, the execute package task turns red,it stopped
the script task can't be run, I don't konw why?
Dear All,
I now have two SSIS package, "TESTING" and "LOADING". The "TESTING" package have an execute package task that call the "LOADING" package. When I want to execute the TESTING package, how can I setup the connection string so that I can edit the password of the database connected by the "LOADING" package?
Regards,
Strike
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
I am using execute pacakge task to execute another package . I am giving the Connection string for the package to execute. It works fine in my development machine but when i try to run in another server after i deployed it. It looks for the datasource path of the DTSX file in the same location.
how do i set the path according to each server where the dtsx file is stored. or any other method of storing it like connection string.
if i store it in theparent package variable where should i point to...
thanks
aa
Hi,
In my application, i have two package, parent package and child package. the parent package is executing child package using a Execute Package Task.
"Execute Out Of Process" property of Execute Package Task is set to TRUE. means the child package will be run in separate process not in the process of Parent package.
this was working fine, but at a particular client location. its failing the error is "not able to load child package".
for me it seems some setting on server restricting to create separate process for child package execution.
when "Execute Out Of Process" property of Execute Package Task is set to FALSE. its working fine.
can anyone help what could cause its failure with property set to TRUE.
Appreciate any help.
Hi,
I am calling one SSIS package from another using the Execute Package Task.
I also need to pass a parameter to the called SSIS package.
Can I do this? If yes, how? If no, then what will be the work-around for this?
Thanks in advance.
I have successfully created a SSIS package which execute a DTS 2000 package and with no problem to execute the task. But I failed to schedule this package. I was not success in setting the logging. When running the package in command line:
dtexec file "C:Documents and SettingslyangMy DocumentsVisual Studio 2005ProjectsTraingDTSTraingDTSDTSTraining.dtsx"
Error: 2008-03-24 08:03:24.36
Code: 0xC0012024
Source: Execute DTS 2000 Package Task
Description: The task "Execute DTS 2000 Package Task" cannot run on this edit
ion of Integration Services. It requires a higher level edition.
End Error
Warning: 2008-03-24 08:03:24.38
Code: 0x80019002
Source: DTSTraining
Description: The Execution method succeeded, but the number of errors raised
(2) reached the maximum allowed (1); resulting in failure. This occurs when the
number of errors reaches the number specified in MaximumErrorCount. Change the M
aximumErrorCount or fix the errors.
End Warning
DTExec: The package execution returned DTSER_FAILURE (1).
Any help will be greatly appreciated.
(32 bit machine, standartd edition of SQL 2005)
Executed as user: S233683-AD01S233683NJ3SQL05. ...at file already exists.' [SQLSTATE 42000] (Error 22048) ERROR -- Could not backup database: master - BACKUP DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 50000) xp_create_subdir() returned error 183, 'Cannot create a file when that file already exists.'
View 2 Replies View RelatedHi :1. I import data into sqlserver, from an excel file, from a worksheetwithin it, named 'input_data'2. then i scrub the data in sqlserver3. then i export some data into the same excelfile but into anotherworksheet named 'output_data'I have got it working and this is how i am doing it right now. I amhaving a problem in the few steps identified below :1. I delete the worksheet 'output_data' using an execsql taskDROP TABLE `output_data'2. Then i have another execsql task to create itCREATE TABLE `output_data`3. Then i have datapump task to put data into worksheet.The work fine, but i am running into a problem, when the output_dataworksheet doesnt exist.So i need to write a query tellingIF `output_data` doesnt exist, then DROP ITHow do i do thisI am open to doing this in ActiveX Script(vbscript) and ExecSQL taskAlso i do not have excel dll or runtime in my dbserver.Please let me knowthanksRS
View 1 Replies View RelatedIs it possible to call a package through the 'Execute package task' and force it to run in 32 bit while the master package runs in 64 bit?
View 1 Replies View RelatedThere is an execute package task that calls the child package. Both parent and child packages have the same password and the passwork is entered into the execute package task. Both packages reside in the same directory path.
Error: Error 0xC0012050 while loading package file "C:Documents and SettingsuserMy DocumentsVisual Studio 2005ProjectsExecutePackageTestExecutePackageTestExtractandWrite.dtsx". Package failed validation from the ExecutePackage task. The package cannot run.
When ExtractandWrite.dtsx is executed by right-clicking on package, the package executes without any errors.
DelayValidation = True for the Execute Package Task tasks is set and DelayValidation for the connection manager is set to True.
Does anyone have any thoughts as to what might be causing this error?
Thanks in advance for your assistance.
I am going to use the BCP utility to export data from a table in a SQL Server 2000 database to .csv file, but I must determine if the file already exists. The BCP export code it going to be in a stored procedure and will be configured to run every two hours so I must have a way of checking if the file exists prior to executing the BCP instruction. If the file exists then no big deal just abort and two hours later it will try again, at some point the file will not exist and the export will export all the data since the last export - but normally this will happen every two hours; I just need to make sure that the "other peoples" utility has proccessed the file (and by definition deleted it).
It makes me no difference whether the best way to do this would be using a batch file that execute and returns true/false or a VBScript or if there really is a way to do it in TSQL. I just cannot seem to find any way.
I would like to look for .mdf i.e. databasename.mdf file and see if it exists. I would also like to do the same for other files such as databasename.ldf, etc.
For each one of these files I do know their directories but would like to know how to check for that file in those related directories.
Thanks
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
Hello World,
I'm new to SSIS and would like a little assistance getting started, if possible...
Here is what I want to do:
Check if file exist (C:DTS UpgradeFilexxx.txt) --->
Archive file (C:DTS UpgradeArchive) --->
Check if file has data (true or false)
AND/OR
If there are any good website that have good direction, let me know
Thanks in advance for your help!!!
Is there is a piece for code ot sample code that can let me check if a file exists? Has any one done this before?
Thanks
Greetings all.
How can I check for file exitence in a specified folder using TSQL?
I can think of a couple of ways to do this so any feedback would be appreciated.
Load the contents of a folder in to a temporay table and check the table for file name. I can do this with something like:
insert into myFiles
exec master..xp_cmdshell 'dir /B /OND filePath*.txt'
Or maybe use OLE Automation Sproc? But I am not sure which method I should use.
Please advise.
Hi, I'm importing 10 csv files with a different name daily. If the file does not exists in a directory (which I have in variable) I want to write an error message, if it does I want to proceed to the for each loop. How do I do this? Any suggestions?
Hi, can someone tell me how to check if a file exists. If it exists then i want to continue with the process and if it fails then send a mail to me.
Thanks in advane.
In SSIS, I need an easy way to see if a file exists, and if not wait for it until a timeout period expires. Here are the options I've discovered, along with the issues I've had:
a) The File Watcher task from www.sqlis.com
This was my first attempt. The task works great, BUT only detects when there is a change on the file. If the file already exists, it keeps waiting which is not the behavior I need.
b) The WMI Event Task
There is very sparce documentation on this event and how to write a WQL query. There are numerous examples of monitoring a folder and if any files appear, cause an event to happen. I need to detect for a specific file. I found maybe one example of this using "PartComponent" but wasn't able to get the sytax right to make it work for me. I also need to access a remote file share using a UNC path (e.g. \servernamepathfile.txt) which I could not get to work.
c) Script Task using the File.Exists() method
I imported the System.IO namespace, and used a File.Exists(\servernamepathfile.txt) with actual success, but am not sure of the best way to continue to wait if the file is not found immediately. I also want to modularize this approach so I can wait for several files simultaneously so was thinking of implementing this script task as a package by itself to accept variables (filepath & timeout period) but need to know if anyone has had success with this approach.
I'm open to suggestions or ways to get options a) and b) to work for my needs.
Thanks!
Kory