File Group Is Running Out Of Space Frequently
Sep 1, 2015
We are receiving following alerts frequently about 1:40 AM in the morning. We have backups running on 11:00 PM everyday and rebuild job running at 2:00 AM. Not sure the exact cause of this error.
Error:
The file group "PRIMARY"Â for the database "tempdb" in SQL instance "MSSQLSERVER" on computer "XYZ" is running out of space.Â
tempdev Initial size : 133,100 MB Growth: By 10 percent, Limited to 140000 MBÂ
templog  Initial Size : 5,475 MB   Growth: By 10 percent, Unlimited
View 8 Replies
ADVERTISEMENT
Sep 1, 2015
We are receiving following alerts frequently about 1:40 AM in the morning. We have backups running on 11:00 PM everyday and rebuild job running at 2:00 AM. Not sure the exact cause of this error.
Error:
The file group "PRIMARY" for the database "tempdb" in SQL instance "MSSQLSERVER" on computer "XYZ" is running out of space.
tempdev Initial size : 133,100 MB Growth: By 10 percent, Limited to 140000 MB
templog Initial Size : 5,475 MB Growth: By 10 percent, Unlimited
View 9 Replies
View Related
Jul 21, 2015
I am currently SQL admin since our ordinary SQL folks are at summer vacation.
Yesterday SCOM alerted that File Group is running out of space on one not so critical database "The file group "PRIMARY" for the database "loganalys" in SQL instance "MSSQLSERVER" on computer "sqlserver2" is running out of space".
I logged in to the SQL server and checked the database in question. It is a very large DB with a size  of 577 GB.The storage on which the database files resides has 123 GB free space so that isn't the issue.
The database is set to autogrowth 1 MB at a time (unrestricted) so that doesn't seem to be the issue either.However, in the database properties under General, it says Space avaliable: 570 MB.
I guess that this may be the issue, that this is under some treshold for SCOM to alert on.I have looked at the other databases and they have everything between 0,25MB to 270MB space avaliable (they are all set to autogrowth 1 MB, unrestricted).
I am not sure what this means and if I have to do something about it?
View 6 Replies
View Related
May 28, 2015
In my environment, there is maintenance plan configured on one of the server and while running DBCC checkdb on a database of size around 200GB, log file usage of tempdb is increasing and causing the maintenance job to fail.
What can I do to make the maintenance job run successfully, size of the tempdb database is only 50GB and recovery model is set to simple. It cannot be increased as the mount point on which it is residing is 50GB.
View 3 Replies
View Related
Jul 20, 2005
Hi,Received the following error during index creation of the tables. Thedata & log files are set to 'unrestricted growth' and enough spaceavailable on the disk. Any reasons?___________Microsoft OLE DB Provider for SQL Server (80040e14): Could not allocatenew page for database 'Ultimareports'. There are no more pages availablein filegroup PRIMARY. Space can be created by dropping objects, addingadditional files, or allowing file growth___________ThanksJohn Jayaseelan*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 1 Replies
View Related
May 23, 2000
Hi,
In sql 7.0 , i would like to create a database with the size of 10Gb, in my server couple of databases already exist.
How do i know how much free space is there in File group.
we are having only one file group i.e PRIMARY.
Could anyone pls tell me about this.
Thank u.
--kavira
View 2 Replies
View Related
Aug 13, 2014
Recently maintenance was done removing some tables from the original filegroup in one drive of our SQL Server 2012 Standard Edition 64bits to another created on a separate physical drive. I was expecting the full amount of data moved to the secondary filegroup to show up as unused on the primary filegroup but that doesn't seem to be the case. Do I have to do anything after the move to release that space, not to disk, but to the database as unused?
View 2 Replies
View Related
Jul 6, 2014
Running Frequently Transaction logbackup during Integrinty check DB /optimization job will cause any issue /impact as duration will extend ...
View 2 Replies
View Related
May 19, 2015
partition with single file group or multiple file group which one best.
we have some report running from partition table, few reports don't have any partition Key and after creating 400 partition with 400 file group it is slow.what is best practices to crate 400 file group or single file group.
View 9 Replies
View Related
Nov 26, 2001
I am trying to insert 2 fields of about 9 million records into a table and i keep getting this message
Server: Msg 1101, Level 17, State 10, Line 1
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
Server: Msg 1101, Level 17, State 1, Line 1
Could not allocate new page for database 'TEMPDB'. There are no more pages available in filegroup DEFAULT. Space can be created by dropping objects, adding additional files, or allowing file growth.
I have unrestricted file growth and over 200 mb of space left, what else can i do?
View 6 Replies
View Related
Jan 30, 2007
I have a 2 row groups in a matrix and I need to add some space between the top one so that all the columns don't run together. Is there a way to do this?
View 11 Replies
View Related
Aug 28, 2001
I have a question on database size, specifically, what difference would I expect in the size of a db (the space actually used for data, not indexes) if I have one single data device vs. multiple data devices spanned across different physical drives. I have 2 customers that have identical database tables (all columns are integers), customer A has 27 million rows and customer B has 36 million rows. If I do an sp_spaceused on the table, customer A's data takes up 9.7 gig, whereas customer B only takes up 3.2 gig, even though it has 9 million more rows. Statistics have been updated, so I'm confident the sp_spaceused is accurate on both databases.
The only differences I can see between the 2 databases is that customer B has 5 separate data files (6 gig each) for the database which are part of the Primary filegroup. These files are all on the D: drive, which is a partition on a RAID 5 array. Customer A has a single large data file (24 gig), which is also on a RAID 5 array.
Any ideas?
View 4 Replies
View Related
Jun 22, 2004
We've got an internal database that replicates with another database server for our website.
Not all tables are replicated, some use merge and the others are snapshot based and published regularly to the public website facing server.
However, there's a lot of data (well, large textual data) that's being transferred and it seems to be generating massive log files that continue to grow and grow.
I'm fairly new to adminning an SQL Server box, so was wondering if anyone can tell me what the best way to keep it under control is? I've heard its possible to truncate the logs, effectively deleting any data that has already been processed by subscribing servers etc.?
As I said, I'm very much new to this and would really appreciate some guidance, if only to the right part of the SQL Server Books Online :)
Thanks,
Paul
View 2 Replies
View Related
May 18, 2006
Hi, we have a SqlServer instance in production containing around 10databases.It has just been realised that all the db's are held on the small c:partition with only a gig or so of space left.On the server there is another partition and another hard disk bothwill ample space (few hundred gigs).What would be the best way of getting the data onto the otherpartitions with minimal impact on the applications. Can we move theprimary data files for each db? Should we just create secondary datafiles on the big partitions for all the db's? Is there a method ofmoving all the data at once?Any ideas on how we should approach this?(ps we dont have control of the sqlserver its outsourced, so simplerthe better).Thanks,Jim
View 2 Replies
View Related
Oct 3, 2006
Hi all,
I'm running out of disk space when running SSIS package. Is there any way to select where temp files are saved during package execution ?
View 8 Replies
View Related
Jul 11, 2014
I have a situation where I have two servers in SQL Server 2012 R2 AlwaysOn Availability Group. One is primary and the other one being secondary.  I am only running SharePoint Database on it.I have run out of space on the primary server and about to run out of space at the secondary server. I have tried shrinking database transaction log files, but it returns an error that it cannot be shrunk as the database is in the AlwaysOn Availability Group.
Questions:
1. Several forums suggest that databases need to taken out of AlwaysOn Availability Group in order for the shrinking to work properply?
2. Would it have any impact on the database if it is taken out of availability group and then added back?
View 6 Replies
View Related
Jul 20, 2005
I've production sql server 7 sp3 on windows NT. I had a 8GB data file ofwhich 5GB were used and 3GB were unused. I wanted to take back the unused3GB.So I did the following with EM GUI:1. I tried to "truncate fre space from end of the file". Didn't truncatethe file. I believe there was no empty space at the end of the file.2. Next I chose the option to "shrink file to 5GB". And to my horror thedata file instead of taking just 5GB took the empty spaces also and the sizeof the used data file went to 8GB.Any idea what's going on?TIA,SP
View 2 Replies
View Related
Mar 16, 2015
one of my database data file is 100 GB and the log file is 500 GB.DB is in full recovery model and the transaction logs happen once in 6 hours.Even then, the Database log file isn't reducing in size.
View 9 Replies
View Related
Nov 28, 2007
I'm starting to think I can't do this with a SELECT....but, any input would be great!
I'm trying to get a running count by group....meaning, my data looks like this (two columns):
john.doe@yahoo.ca X
john.doe@yahoo.ca Y
john.doe@yahoo.ca M
elvis@gmail.ca A
kid.rock@hot.ca X
kid.rock@hot.ca Y
..and I want to add a column like this (running count of codes by email address):
john.doe@yahoo.ca X 1
john.doe@yahoo.ca Y 2
john.doe@yahoo.ca M 3
elvis@gmail.ca A 1
kid.rock@hot.ca X 1
kid.rock@hot.ca Y 2
thoughts? ...thanks in advance.
david.
View 3 Replies
View Related
Aug 10, 2007
It seems when I run the query with the set staticts IO on then statistic reports back with the 'work table', and the query takes 30+ sec. if the worktable is ommited(whatever the reason?) the query take less 1 sec.
Here is my take, I believe work table is created in tempdb...and if not then whole query is using the cached page, am I right?
if I am right then the theory is, if I increase the (via sp_configure) server min memory setting and min query memory, the query ought use the cached page and return in less 1 sec. (specially there is absolutely no one but me on the server), so far I can't make it go faster...what setting am I missing to make it run faster?
Another question is if the query can not avoid but use the tempdb, is it going to always be 30 sec+ time? why is tempdb involvement make it go so much slower?
Thanks in for you help in advance
View 1 Replies
View Related
Jul 6, 2015
For a database, we have 4 data files in a particular file group and the file sizes are almost 70 GB each.
Do I come across any performance issues if I create/pre-allocate an additional data file in the same file group so that the existing files don't grow too much?
View 5 Replies
View Related
Apr 27, 2015
In a server we had File Growth,And then We had to Add New Hard Drive And New File On It.And Now We have New server with a Huge Hard Drive.But all files remaind.Can I Reduce This files to One data file or not ?
View 3 Replies
View Related
Jul 30, 2007
I have a huge MDF File - 120 GB File (Had setup as 1 MDF initially) -- Did not anticipate that the DB would grow to that size!!
Anyways.. I heard that the general performance woul grow if i had them as "File Groups"..
Is there anyway - to split the existing MDF file into Mutliple files as a File Group?
Where should i start? Can someone please direct me..
View 1 Replies
View Related
Mar 5, 2008
Hello,
I am trying to run SSIS project which is failing on one of the dataflow. This dataflow should create in Destination approximately 209,405,240 records. My flow is failing and the reason for it €“ size and log file.
This is the error I am getting.
An Ole db record is available. Source: €œMicrosoft SQL Native Client€? Hresult 0x80004005 Description: €œThe transaction log for database €˜tempdb€™ is full. To find
out why space in the log cannot be reused, see the log_reuse_wait_desc column in sys.databases.
An ole DB record is available. Source: €œMicrosoft SQL Native Client€? Hresult 0x80004005 Description: Could not allocate space for object €˜dbo.DataPoint€™. €˜PK_DataPoint€™ in database €˜DatabaseName€™ because the €˜primary€™ filegroup is full. Create disk space by deleting unneeded files, dropping objects in the filegroup, adding additional files to the filegroup, or setting autogrowth on for eisting files in the filegroup.€?
Please let me know what can I do about it? Should I change some properties? How do I make it work and have better performance?
Thanks.
View 5 Replies
View Related
Apr 29, 2014
Why shrinkfile empty file does not redistribute data evenly in the primary file group with multiple files:
Please run the script attached to see what the end result is.
This is what I set up last night on my test machine.
1) Create database [FGTest] size 200MB
2) Create table called TEST on primary
3) Insert 40MB of data into test
4) Create another file group called temp in primary size 200MB
5) Shrinkfile('FGTest',emptyfile) so that all data is transfered from FGTest into temp file group.
6) Add another 2 files called DATA2 and DATA3. Both are 200MB.
7) We now have 3 empty files that I want data distributed evenly on. FGTest, DATA2 & DATA3
8) Shrinkfile('temp',emptyfile) to move all the data from temp over the 3 file groups evenly
I would expect at this stage to have the following:
FGTest = 13MB,
DATA2 = 13MB,
DATA3 = 13MB
(40MB of data over 3 files should be about 13 MBish in each file)
What I actually end up with is this:
FGTest = 20MB
DATA1 = 10MB
DATA2 = 10MB
It looks as though SQL Server is allocating 50% of all data to the original file and then 50% evenly over
the remaining files in PRIMARY.
View 3 Replies
View Related
Oct 10, 2000
I have a query that retrieves a single record from searching on two tables.
The statement goes like this...
select sum(amount) from Table1 A union Table2 B on a.id = b.id
where date < ### and date > #### and account = ###
As people are running a particular report, this statement is executed time and
time again to pull up the numbers necesarry for the report. When the report gets slow, I can speed it up by updating the statistics. My concern is that I'm having to update the statistcs every hour; otherwise, the query becomes slow. I have noticed that users are inserting data while users are running the report on one of the tables listed above. I'm sure that's making it become more fragmented and ultimately slowing down the query.
Do you have any suggestion on how I can make the union of these two tables faster? Or is there anything I could do to speed the query besides creating clusted indexes?
Any help would be appreciated....thank you
View 1 Replies
View Related
Feb 24, 2000
On SQL*Server7, is there a system table to find out the transaction log space used? DBCC SQLPERF (logspace) must be using a undocumented system table.
Thanks.
View 4 Replies
View Related
Apr 10, 2008
Hi,
I have 4 drives in my HDD namely C,D,E,F
On Each Drive, i have my Database Data, Log and Index File.
I wanted to know the Allocated Space / space used in the Database Data / Log or Index File.
What if i am not able to login to Database then how will i determine the used space / free space in the DB File or Log File or Index File.
Thanks in advance.
-- Chetan
View 3 Replies
View Related
Apr 19, 2007
How to check the free space in a DB file using TSQL?
------------------------
I think, therefore I am - Rene Descartes
View 20 Replies
View Related
Mar 22, 2007
Is there a way to know how much space is free in each transaction log file of the same database?
Example:
A database with 3, 1GB files for transaction log: A, B and C created in this sequence.
From what I have read, since SQL Server 2005 writes to a single transaction log only, I guess if the transaction log is using 2.5GB than A and B are full and B is only half full. Is this correct?
Thanks.
View 1 Replies
View Related
Jun 27, 2006
Hi There
I would like to write sql to check that space used by any given data file in SS2000.
sp_spaceused only returns the total space used by the DB or object in the DB, not for a specific data file.
DBCC SHOWFILESTATS does give me this information , but it is not documented in BOL, i would prefer not to use an undocumented command to ensure future use in later versions. Is DBCC SHOWFILESTATS an undocumented T-SQL command ? If so what documented t-sql command will provide me with this information ?
I could query system table's and work this out , but as mentioned this may not not work in future versions of SS.
Thanx
View 1 Replies
View Related
Jul 2, 2001
Hi Everybody:
We have a table which needs to be updated 2 million times per day. It hosts all real time transaction. There are 200K records in this table. Would you please to share your experience with me about how to protect/save such table in SQL 2000 from any possible damage?
We plan to use point-in-time backup (every 5 minutes). It still takes at half an hour to recover the whole database. Any new technology from Microsoft or SQL 2000 you can recommend?
Thank you very much.
Joan
View 3 Replies
View Related
Sep 25, 2001
Can any one recommend an approach for identifying the frequently accessed tables and files in a SQL/Server application? Particularly, if the database is stored on raw partitions instead of FAT or NTFS. Thanks.
View 3 Replies
View Related
