Filtered Report Parameters For Custom Reports
May 4, 2008
I am trying to build a report that allows a user to enter partial text that filters the values in a drop down
For examle;
Lets say I am selecting a value from a drop down for States and I want to type in FL to filter the collection down so that only Florida appears in the select list.
I know the above example wont work since I cannot actaully enter text into a drop down, however
I have also tried to seperate this functionality by creating one report parameter for entering the search text and another parameter that will display a filtered data set using the text entered in the first parameter.
Is this something that reporting services can handle ? If it is please provide a brief example.
Thanks
View 6 Replies
ADVERTISEMENT
Aug 6, 2007
Hi,
We are developing a custom report item but we cannot find a way to get the report parameters. In Vb examples there is mentioning of globals but these do not seem to be present in the c# enviroment.
Could anyone give a solution on how to get to the report parameter collection in run-time.
Thanks,
Arwin van der Laan
View 8 Replies
View Related
Mar 15, 2007
Is it possible to create cascading parameters with in Report Builder? I have done this with Report Designer but i need a solution with Report Builder.
(I need the structure: First the user selects the state, afer the postpack the cirties of the state are listed in another dropdownlist for selection).
Thanks in advance
View 1 Replies
View Related
Nov 20, 2015
I run these stored procedure to build the report and I am able successfully to build the report but I need some prompts to in the report to get the specific data .
ALTER
PROCEDURE [dbo].[Sharepoint_Ticket_Report]
@StartDate
DATETIME,
@EndDate
[Code] ....
And for prompts how to create created_by and message_type dropdowns as shown in picture.
View 7 Replies
View Related
Oct 19, 2007
Hello Everyone,
I'm just trying something that I haven't tried before, and I'm wondering if anyone has done it before. I'm building a report with three charts. This chart is going to go inside of Microsoft CRM. One of the charts has to use CRM filtered views, so that a manager can see his whole team's numbers, but a team member will only see his numbers. I can't do this any other way because of the complexity of the query, which has 3 select statements joined together as tables. It would be too complex to try to use a parameter throughout all of those tables, and I'm not sure how I would set up a parameter to show all of the data if the user were the manager, and only the single user's data if it were someone else.
The other two charts use filtered views as well, but they have similar joins, and I had to hard code a column with meaningless data into each SELECT table so that I could use it to join, as the tables had no other similarities.
The problem is that when you upload a report into CRM, if it uses filtered views, you don't have to go into Report Manager and change the data source from a shared to a custom data source. But on reports where I don't use the filtered views, I find that they always break when upload them, because they use the shared data source. This is the case even when I have created the report without the shared data source. So I usually have to go in and change the data source from shared to custom every time I upload a report without filtered views.
Because of the situation I described, this report uses both filtered views and non-filtered views (for the hard-coded columns). When I upload it into CRM, it won't work either way, with a shared or a custom data source.
Has anyone had this problem before?
View 1 Replies
View Related
Dec 14, 2006
I am trying to report against a cube and I want the user to be able to choose the date for the report.
Now the cube dimension has been built against a calendar which contains values for the next 30 years(!) so when I create a parameterized report the list of dates is ridiculously huge.
I want to filter the dates out and show only the dates for which there is data. How do I filter out the list of dates for a parameter?
View 3 Replies
View Related
May 2, 2007
Good morning,
I'm in the process of creating a report to show employees and managers holiday and absence information. Is there a way of filtering the results of the report based on who is running the report, so that employees could only see their own information and managers could only see theirs and their subordinates information?
What I was hoping to do was create a lookup table which cross-references Windows logins with employee numbers and then use this information to pass a parameter to the SQL query, but I don't know how to retrieve the login from the machine being used to view the report.
I've heard about row level security and it seems ideal in theory but I fear the implimentation of row level security would be far beyond my meagre knowledge.
Any constructive suggestions welcomed.
Thanks,
Paul
View 3 Replies
View Related
Jun 22, 2007
We have several reporting services reports that have been formatted specifically for dashboards displays, ie. with charts, kpis, tables, etc.
Currently I am using MOSS 2007 dashboards to display these reports on a large flat-screen display in our area, but only using a Web Page webpart to display. Because these reports contain a lot of information, it is more ideal to show a single report at a time, and after a few seconds display a second report, etc, similar to a powerpoint slide show.
My question is, how can this be accomplished? Can the Reporting Services web parts do this? Can a custom web page be built to flip between different reports on a timed interval dynamically? Can transition effects (fade, wipe, etc) be used between report views?
The important point here is that the dashboard/reports are displayed on a central monitor, so these dashboards are not designed to be interactive (i.e. people viewing, changing, filtering, printing, etc.) - only viewing in a browser.
Thanks!
Kory
View 1 Replies
View Related
Jun 19, 2014
I have downloaded MS's performance dashboard report and installed. I wanted these report should automatically send the performance report to my email.
View 1 Replies
View Related
Feb 13, 2007
Hello,
I have a report of processes which either go into a Log table or an Error log table. They also have start / finish datetimes and a timespan value. So I want to report the process elapsed time or the error condition, depending on which table the process finished up in.
I then compare the elapsed time to the timespan and then show either a red flag (errored) green flag(worked within timespan) or yellow flag(worked but ran over allotted time) depending on what happened.
Is this possible?
I think it would be easy for me to get the info I want into a dataset using .net code but how do you link that in with SSRS?
Any help appreciated,
Thanks.
View 1 Replies
View Related
Jun 27, 2007
I am looking for some examples of code for an appliction which will let run RS reports from a custom application. The user will choose the reports from a menu structure
We have an exiting application which we use to run crystal reports which we are going to be migrating to RS. We use custom web controls to capture the required parameter values for the reports, and hope to reuse the same controls (with minimal rework) to capture the parameters values for the RS reports.
What I am after is some code which will
a) let me run the report and display it. I don't want to display the report parameters in the URL etc as we generate some report parameter values based upon the user's ID and do NOT want them displayed back to the users
b) export the report to PDF, CSV etc depending upon the option chosen by the user.
The application will be developed in VS 2005 - VB. Does any one know of some links to some sample code
View 1 Replies
View Related
Aug 10, 2007
We have a custom assembly that worked fine with SSRS 2000. Now that we have upgraded to SQL 2005 we get an "Access is denied" error when attempting to deploy reports that reference this assembly. I could swear that when we first attempted it it worked. We decided to make a minor change to the assembly code and that's when the problem started, even though I've since reverted back to the original code to make certain that the minor change wasn't the issue. The assembly is in the proper folder - C:Program FilesMicrosoft SQL ServerMSSQL.2Reporting ServicesReportServerin - and the reports are referencing the current version. I've searched high and low on the web for an answer but have found nothing even remotely helpful. All this code does is return a string...it's not doing anything that should require any additional security; and even then I doubt if there would be a problem when deploying.
The full text of the error is:
Error while loading code module: ��Reporting, Version=1.0.2778.12272, Culture=neutral, PublicKeyToken=null��. Details: Could not load file or assembly 'Reporting, Version=1.0.2778.12272, Culture=neutral, PublicKeyToken=null' or one of its dependencies. Access is denied.
Any ideas? Anyone? I'm at my wit's end on this!
Thanks,
Mike
View 5 Replies
View Related
Dec 28, 2007
Any One has implemented Custom Subscriptions of Reports(Reporting Services 05)
View 4 Replies
View Related
Sep 19, 2007
Hi,
I'm trying to deploy Reporting Services on an Internet-facing web server using a custom security extension (forms authentication). We will be putting Report Manager on the Web Server outside of the firewall, and Report Server on another machine inside the firewall. When testing the solution in a development environment with Report Manager and Report Server on the same box, the solution works fine.
When testing it using the Internet-facing environment described above, it almost works but there seems to be an issue with the authentication cookie that is generated. Here's what happens:
1. User enters credentials on UILogon.aspx and submits form.
2. In the code-behind, LogonUser() is called through a web service proxy and the authentication cookie is returned successfully. The code used here to set the cookie is the same code used in the Forms Authentication sample that ships with RS2005.
3. The user is redirected to Folder.aspx, and the request hangs for a while, and eventually kicks you back out to UILogon.aspx, as if it lost the authentication cookie. When doing a trace on the HTTP header, the cookie is still there.
Is there anything special I need to do to make the Report Server "see" the cookie when I have Report Manager and Report Server on different machines?
Any help would be much appreciated!
Mike
View 2 Replies
View Related
Mar 18, 2008
Hello everyone,
I created a custom assembly using C# to transform some binary data into text, and in this assembly I used one win32 dll developed by our customer to help me to do the tranformation.
The code I used to call the win32 dll is like below:
[DllImport("tdasuie.dll", EntryPoint = "AlrtLogConditionToText",
ExactSpelling = false, CharSet = CharSet.Auto, SetLastError = true)]
private static extern UInt32 AlrtLogConditionToText(Byte[] pbCondition, StringBuilder pszText, UInt32 dwSize);
I defined a C# method to call the above win32 method and return a string. Then in the report, I called this C# method to get the correct string.
In the report designer, the C# method in the custom assembly can return the correct string in the preview window. But after I deployed the report into the report server, the textbox will only display "#error" in the report manager web page.
Can anybody help me on it? Thanks a lot.
Danny
View 4 Replies
View Related
Feb 21, 2008
Hi,
I am trying to retrieve and manipulate the value of the stored procedure parameters in the following custom code:
Code Snippet
Public Function ShowLoading(ByVal intOption as integer, byVal BasicLoading as string, byVal BasicHealthExtra as string, byVal RiderLoading as string, byVal RiderHealthExtra as string, byVal TotalAmount as string) As string
dim strRider as String
dim strCompanyName as string
strCompanyName = Fields!CompanyName.Value
select case strCompanyName
case "and Plus Rider ":
strRider = "Plus Rider"
case "and Assist Rider ":
strRider = "Assist Rider"
end select
return strRider
End Function
However, i got this error when I try to preview the report: An error occurred during local report processing, The definition of the report :
'/reportC' is invalid. There is an error on line 5 of custom code: [BC30469] Reference to a non-shared member requires an object reference.
Any help is greatly appreciated. Thanks in advance.
View 1 Replies
View Related
Oct 29, 2013
I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies
View Related
Nov 29, 2006
I have developed a custom report item that works fine in design and preview mode while in Visual Studio. I cannot get it to show up on my deployed reports. Here's what I have done so far:
1. Deployed the report using Visual Studio
2. updated the rsreportserver.config file with the following entry:
<ReportItems>
<ReportItem Name="PedigreeChart" Type="Uabr.Rap.PedigreeChart.PedigreeChartRenderer, Uabr.Rap.PedigreeChart" />
</ReportItems>
3. Updated the rssrvpolicy.config file with the following entry.
<CodeGroup
class="UnionCodeGroup"
version="1"
PermissionSetName="FullTrust"
Description="This code group grants Uabr.Rap.PedigreeChart.dll FUllTrust permission. ">
<IMembershipCondition
class="UrlMembershipCondition"
version="1"
Url="C:Program FilesMicrosoft SQL ServerMSSQL.3Reporting ServicesReportServerinUabr.Rap.PedigreeChart.dll" />
</CodeGroup>
I've also tried using the StrongNameMembershipCondition with no better results.
4. The dll and its dependencies are copied to the bin directory of the report server.
5. When I load a report with this custom report item on it, the report loads fine with no errors or warnings in the log file (even with verbose tracing). The area where the custom item should be is just white. It's almost like Reporting Services isn't registering the item correctly.
This is particularly frustrating because the report works fine in Visual Studio - apparently I configured that correctly. Any suggestions would be greatly appreciated. I'm stumped.
View 6 Replies
View Related
May 3, 2007
How do I jump to another report based on a value in my current report. The report that I am jumping from has no parameters, just values.
View 7 Replies
View Related
May 3, 2007
Hi,
I am interested in adding custom buttons to the parameters toolbox (under "View Report"). I'm trying to provde a way for users viewing the report to go "Back" or up a level (in the drill through reports). Does anyone have any information on this topic, or know if it's even possible?
Thanks in advance,
-Brandon
View 3 Replies
View Related
Oct 9, 2006
Hi,
I have problem with SQL Reporting Services, actually i want display the 3 parameters in a single line in a report i.e. in the while preview of the report and after deploying the report (by default it is showing 2 parameter per line). for example if have 6 parameters i wanted it display it in 2 rows and 3 columns format.
Please can any one help me in this regard.
Thanks
View 5 Replies
View Related
May 17, 2007
I use the Reports Servers Design to Design My report, but I need to use multi value fot Report Parameters, But Don.t to do.
Mulit Parameters (Type = 'A' , 'B')
A Value are '1' , '2'
B Value are '3' , '4'
I use SQL Script to Run
Select * From XXX
Where A IN (@Type)
@Type may be 1,2,3,4 or 1,2 or 3,4
How to slove
Thanks
View 4 Replies
View Related
Feb 7, 2008
Hi,
I created one report with 5 dynamic drop down parameters. The first parameter is passed from URL and the other's parameter drop downs should get populated based on the first one. These 4 parameters default to some value which I defined.
Everything is working fine in the Report Manager but when the report is integrated in a web page I am getting some problems.
After the drop-downs are populated and the user wants to filter down by using different values in the drop down, causes the report to generate automatically and all the dropdowns are reset to default.
Have you had this problem before? Anyone can advise me how to solve this issue?
Thank you in advance!
/daniel
View 1 Replies
View Related
Mar 31, 2008
Is it possible to run a report with some multiple parameters values and output it to a single file file? For example if you have a parameter list (1,2,3) and you want to run the report for parameters (1,2). Our users generate the list of parameters and rather run the report for each one, they would like to have reporting services run it for the whole set and just output 1 file. I have searched everywhere and can't find anything that works. Someone suggested sub reports but based on what I saw, it didn't look very useful. I can go into more detail if neccessary, this has been bugging me for a while now.
Thanks
View 1 Replies
View Related
May 8, 2008
how do u pass parameters to a subreport.... i tried doin it but got an error msg sayin "Sub report cannot be displayed"
any solution????
View 4 Replies
View Related
Oct 3, 2007
Hi,
I am a beginner with SQL Reporting Services and having a problem. I can deploy reports with no parameters and the datasources fine. But when I deploy a report with a parameter I get the following error "An unexpected error occurred in Report Processing." I looked at the log file and this is what I found. Any suggestions on how to fix this?
aspnet_wp!processing!7!10/03/2007-14:59:11:: e ERROR: Throwing Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing., ;
Info: Microsoft.ReportingServices.ReportProcessing.ReportProcessingException: An unexpected error occurred in Report Processing. ---> System.IO.FileNotFoundException: Could not find file 'C:Documents and SettingsD2P6PM51ASPNETLocal SettingsTempexpression_host_a23b56b0ae874a989c3e9c76fe9a07ff.dll'.
File name: 'C:Documents and SettingsD2P6PM51ASPNETLocal SettingsTempexpression_host_a23b56b0ae874a989c3e9c76fe9a07ff.dll'
at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath)
at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy)
at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share)
at Microsoft.ReportingServices.ReportProcessing.ReportCompileTime.InternalCompile(Report report, AppDomain compilationTempAppDomain, Boolean refusePermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportCompileTime.Compile(Report report, AppDomain compilationTempAppDomain, Boolean refusePermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportPublishing.Phase3(ParameterInfoCollection& parameters, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions)
at Microsoft.ReportingServices.ReportProcessing.ReportPublishing.CreateIntermediateFormat(CatalogItemContext reportContext, Byte[] definition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, PublishingErrorContext errorContext, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions, String& description, String& language, ParameterInfoCollection& parameters, DataSourceInfoCollection& dataSources, UserLocationFlags& userReferenceLocation, ArrayList& dataSetsName, Boolean& hasExternalImages, Boolean& hasHyperlinks)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.CompileReport(CatalogItemContext reportContext, Byte[] reportDefinition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, PublishingErrorContext errorContext, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions, String& reportDescription, String& reportLanguage, ParameterInfoCollection& parameters, DataSourceInfoCollection& dataSources, UserLocationFlags& userReferenceLocation, ArrayList& dataSetsName, Boolean& hasExternalImages, Boolean& hasHyperlinks)
at Microsoft.ReportingServices.ReportProcessing.ReportProcessing.CreateIntermediateFormat(CatalogItemContext reportContext, Byte[] reportDefinition, CreateReportChunk createChunkCallback, CheckSharedDataSource checkDataSourceCallback, AppDomain compilationTempAppDomain, Boolean generateExpressionHostWithRefusedPermissions)
--- End of inner exception stack trace ---
Thanks
Allan
View 1 Replies
View Related
Dec 27, 2007
How do you create a link on one report to run another report passing a parameter (or two).
View 4 Replies
View Related
Jan 31, 2007
I have one report "Incident Summary" which has a Report Parameter called DimPoolPool using ParameterValue for Value Field and ParameterCaptionIndented for Label field. The default value is [Dim Pool].[Pool].[All]
From another chart report I want to be able to click on a column to make open the Incident Summary report parameterized by "Pool". So I got to properties of the chart > Data > Values > Edit > Action > Jump to report > Parameter, and here I enter DimPoolPool = Fields!Pool.Value.
It seems to me that this should be picking up [Dim Pool].[Pool].&[poolname] and entering that into the parameters of Incident Summary report. However instead the Incident Summary opens with blank parameter waiting for user to enter.
How do you format parameters correctly between reports?
View 2 Replies
View Related
Nov 17, 2007
I need the ability to choose between quite a few cascading olap time query parameters for a report without my creating a report or subreport for every combination of these parameters. If the recordset were smaller perhaps I could filter it when it's passed back to the report but it's a few million. Will switching to expression-based command text and building the mdx queries in code work? I would like to be able to tell rs to remove the parameter from the query if no selections are made.
View 2 Replies
View Related
Oct 31, 2007
I have seem many messages about this, mostly over a year old, with no satisfying answer.
I have a set or reports that jump between each other, passing parameters, that work fine in VS 2005. (They are mostly based on sql server 2005 stored procedures).
When the reports are deployed, the one that jumps without a parameter works. The ones that pass parameters do not even 'activate'- that is, the text box to be clicked does not allow the user to click.
If I go to the report directly through the browser, it lists the missing parameters and the report does not render.
I am using IE7. All SP on IE and SQL are current.
Microsoft- will you be making this feature work anytime soon?
Thanks
View 5 Replies
View Related
Nov 16, 2007
hi friends,
i am having one crystal report from and one web application from which contains one crystal reportviewer i need to give the parameter in the web form and get the data for that parameter untill this its working fine for me.
my problem i need to display the value in the crystal report which i gave in the web form.
View 1 Replies
View Related
Sep 21, 2015
I have created a custom library(CodeLibrary) which internally references the dlls Microsoft.TeamFoundation.Client and Microsoft.TeamFoundation.WorkItemTracking.Client.
I added this custom Dll codelibrary.dll to my SSRS report. and the expression of one of the field as
=codelibrary.codefunction.GetValue(1000)
codefunction is the class and GetValue is the method.
When I preview the report, I get the error "Error while loading code module:
'CodeLibrary,Version=1.0.0.0,Culture=neutral,PublicKeyToken=null'. Could not load file or assembly 'CodeLibrary,Version1.0.0.0, Culture=neutral,PublicKeyToken=null' or one of its dependencies. The system cannot find the file specified."
I am using VS2013, I have placed the custom library DLL in the path
C:Program FilesMicrosoft Visual Studio 12.0Common7IDEPrivateAssemblies
I have tested the custom library with a WPF application and it works fine.
I am not able to figure out what is causing this error.
View 4 Replies
View Related
Apr 25, 2008
Hi,
I am working on SSRS. I need to open a new report from one report when user clicks on some
particular summarized count link.
It is a sort of drilled down report. I am not getting how to pass the respective Ids (more
than one) to the next report when user clicks on the summarized link in the 1st report.
These ids I want to use as a parameter (multiple) in the 2nd report to dump the rows from
the database.
View 3 Replies
View Related
