Filtering NULL Values From A Chart
Mar 18, 2008
I am facing some problems in displaying data in a chart on a report. Let me give you a background on the report
The report has 8 parameters, Industry,CType,PType, S#, ECode, Start Date, End Date and Trend.
The layout of the report has a table and a chart.
Both the table and the chart need to display Normalized Value ( count of ECode / count of PType that are closed in the date range selected) and the Trend ( where the trend can be Weekly, Monthly, Yearly or Quarterly).
Both the chart and the table should display the data for the entire date range i.e if the Trend is Month and the Date Range is Jan 2007 Jan 2008, then the table and the chart should display months from Jan 2007, Feb 2007 .... Jan 2008 irrespective of whether or not there are error codes present for that month.
In order to satisfy the point 4 mentioned above, we have created the main dataset in such a way that it would have one row for each day between Jan 2007 to Jan 2008. Any fields that do not have data corresponding to a date will come up as NULL in the dataset.
Now, we need to display a chart in the report which would be a Trend v/s the Normalized Value chart for each ECode. So, we have put in the Normalized value in the 'Value' field of the chart, Trend group in the 'Category' field of the chart and ECode in the 'Series' group of the chart. The chart displays fine except for one extra series for the NULL values in the Error Code ( the one in green below). Is there any way in which we can do away with this NULL series without changing the dataset? I tried using filters for the 'Series' but it doesn't work ( used filters like <>NULL, <> "" , <>Nothing, cstr(ECode) <> NULL/"" etc ).
View 4 Replies
ADVERTISEMENT
Jan 29, 2008
Hi,
How do I filter out Null values in a matrix table
one off my columns is picking up the Null values and I would like to filter this out.
Is there a simple way of doing this as filtering it out at the Dataset level is not the ideal solution for me.
thanks
View 5 Replies
View Related
May 16, 2008
I have a report I'm writing and have got a problem that has stumped me.
The data the report is based in is in this format:
Date Type
1/1/08 A
1/3/08 B
3/1/08 C
3/5/08 B
3/10/08 A
3/12/08 C
3/20/08 A
Management wants a report showing a line chart that summarizes the data by Month and by Type. So, there are 2 series depending on the Type and data values are based on the count of each Type. So, in the example above the x-axis group would be month, the values would be count(Type) and there would be 2 series €“ Series 1. A, B and Series 2. C
I€™ve defined the x-axis to be Month(Fields!DateOccured.Value). However, they want the x-axis to show every month for the entire year not just what is in the database. So, I defined the x-axis to have a scale of 1 to 12 and the major interval is set to 1. This displays 1 through 12 on the x-axis.
The problem is when there is no data (null) for a particular month. Instead of showing 0, the line chart does not plot anything and the line is drawn to the next displayed point. So, for example on the data above the line chart would plot:
January
Series 1 €“ Qty. 2 Series 2 €“ Qty. 0
February
Null
March
Series 1 €“ Qty. 3 Series 2 €“ Qty. 2
The line chart would draw a line from January to March skipping February. I need to display the null values as 0 and not null indicating no occurrences for the month rather than no data present.
Thanks!
View 11 Replies
View Related
Mar 3, 2007
Hi all,
I have a datasource with three columns.
NAME / DATE / COST
The dates run from January 2005 to March 2007.
They appear in the following format in the query window:
03/01/2005 00:00:00
All I want to do is put the dataset in to a graph and filter the date so it only shows any cost from January 2006 onwards. What ever date I type in the filter I get the following error
"Cannot compare date of types System.Datetime and System.String"
Anyone know what I am doing wrong or how to solve the problem?
Cheers,
Rob.
View 1 Replies
View Related
Jan 25, 2008
I have a pivot transform that pivots a batch type. After the pivot, each batch type has its own row with null values for the other batch types that were pivoted. I want to group two fields and max() the remaining batch types so that the multiple rows are displayed on one row. I tried using the aggregate transform, but since the batch type field is a string, the max() function fails in the package. Is there another transform or can I use the aggragate transform another way so that the max() will work on a string?
-- Ryan
View 7 Replies
View Related
Aug 26, 2015
I developed the following T-SQL query that runs successfully, but I was looking for a more efficient and concise way to do this. Is there a CTE that can replace all of these case statements? I've updated my query as below. Although this sample query works, it's not working for my real data. Instead, I get an error. At the bottom is the error part of my real query.I copied all of the tables from the first query block below. But when I wrote the bottom query block, it underlined in red the words "answer" and "question." It says "Invalid column name".Â
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#hard_values')
) DROP TABLE #hard_values;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#dummy_data')
) DROP TABLE #dummy_data;
if exists (select * from tempdb.dbo.sysobjects o where o.xtype in ('U') and o.id = object_id(N'tempdb..#temp')
[code]...
View 13 Replies
View Related
Apr 26, 2006
Requirements:
1) Cannot have results in which both m.homephone & d.homephone are both null, or both m.workphone & d.workphone are both null in the result set
2) We also do not want to see any combos where one homephone is null and the other has only the char 0....same for workphone...no null & 0 combinations.
e.g.
m.homephone d.homephone
null 0
0 null
The phone fields are varchar
I know this is hidiously wrong but is my first sloppy attempt at best:
select m.number, m.homephone as master_homephone, d.homephone as debtor_homephone, m.workphone as master_workphone, d.workphone as debtor_workphone
FROM master m
INNER JOIN debtors d ON d.Number = m.number
where (d.homephone <> m.homephone OR d.workphone <> m.workphone)
AND (d.homephone IS NOT NULL AND m.homephone IS NOT NULL)
AND (d.workphone IS NOT NULL AND m.workphone IS NOT NULL)
AND NOT ((d.homephone IS NULL AND m.homephone = '0') OR (d.homephone = '0' AND m.homephone IS NULL))
AND NOT ((d.workphone IS NULL AND m.workphone = '0') OR (d.workphone = '0' AND m.workphone IS NULL))
View 7 Replies
View Related
Aug 29, 2006
Hi -- I'm starting an ASP.NET 2.0 application which contains a page with a checkbox and gridview control on it. In its default state the gridview displays all the records from a table pulled from a SQL Server database (via a SqlDataSource object). When the user checks the checkbox, I want the gridview to display only the records where one of the columns is not null. But I've been unable to construct the WHERE clause of the SQLDataSource object correctly. I see that I can hard-code the SqlDataSource object so that the column to be filtered is always NULL or always NOT NULL. But I want this filtering to be more dynamic such that the decision to show all or non-null records happens at run-time. Should I be using two SqlDataSource objects -- one for the NOT NULL condition and one for the "all records" condition? Then when the user checks the checkbox, the gridview would be configured to point to the appropriate SqlDataSource object. (???) Seems like a bit of overhead with that approach. I'm hoping there's a more elegant way to get this done. Please let me know if you need more information. Thanks in advance. Bill
View 2 Replies
View Related
May 15, 2008
I have gridview and i want to ignor that filtering if that parameter is empty how do i write that query.
my query is
select * from UserMAster where UserId=@USerID and RoleId=@RoleId
if @UserId is blank then i want to select all records without filtering with user Id a
nd if i have passed null or anything as parameter in roleId then alsoi want all the records if it contain value then i want to do filetring is it possible to with query. or else send me some alternative so that i don't need to execute more query.
View 7 Replies
View Related
Apr 1, 2008
does anyone one know how to filter this 01/23/2008 to 2008. i just want the year and stored it to a column in my sql database.
thanks
View 3 Replies
View Related
Oct 18, 2001
There's some SQL below (T-SQL) & I'm wanting to have this result set
grouped by Venue_ID in order to remove rows where there are duplicate values contained in just one column.
The columns BCOM_ID contain unique values, but Venue_ID can have duplicate
values. I only want to get rows for one instance of the Venue_ID (per
BCOM_ID) - doesn't matter which instance but basically, no duplicates.
Oh yes, one of the columns is a Bit column.
Any ideas would be welcome & appreciated!
Many thanks,
Darren
darren@darrenbrook.fsnet.co.uk
SQL:-
SELECT Booking_Header.BH_ID,
Booking_Header.Booking_Header_Description,
Booking_Header.BStat_ID, Booking_Header.BT_ID,
Booking_Header.Tagged, Booking_Header.Status_Timestamp,
Booking_Header.Start_Date, Booking_Header.Days_Qty,
Proposal.PPL_ID, Proposal.PPL_Status,
Booking_Component.BCOM_ID,
Booking_Component.Component_Description,
Booking_Component.Venue_ID, Venue.Venue_Code,
Venue.Description, Address.Address_ID, Address.Town,
Booking_Status.BStat_Description,
Booking_Type.Type_Description
FROM dbo.Booking_Header INNER JOIN
dbo.Proposal ON
dbo.Booking_Header.BH_ID = dbo.Proposal.BH_ID INNER JOIN
dbo.Booking_Component ON
dbo.Proposal.PPL_ID = dbo.Booking_Component.PPL_ID INNER
JOIN
dbo.Venue ON
dbo.Booking_Component.Venue_ID = dbo.Venue.VE_ID INNER JOIN
dbo.Address ON
dbo.Venue.VE_ID = dbo.Address.VE_ID INNER JOIN
dbo.Booking_Status ON
dbo.Booking_Header.BStat_ID = dbo.Booking_Status.BStat_ID INNER
JOIN
dbo.Booking_Type ON
dbo.Booking_Header.BT_ID = dbo.Booking_Type.BT_ID
WHERE (dbo.Proposal.PPL_Status = 1) AND
(dbo.Booking_Header.BH_ID = 10)
Thanks,
Darren
View 2 Replies
View Related
Jun 6, 2006
Hi,
I am using SQL 2005. I have a SELECT query in a stored proc with 3 parameters:
@subaccount,@numDaysCutoff,@numDaysPcts. The proc needs to be modified to return data when subaccount values are any of these:
FRRIJ
FRRIC
FRMM
ROBECO
FRJV
MAIL
FRUKV
FRICE
Currently I use a WHERE condition and am able to get data correctly. However, for a NULL value I should get everything including those not in the above list. Should I use CASE statement instead? How?
@subaccount VARCHAR(8) = NULL
, @numDaysCutoff INT = 1
, @numDaysPcts INT = 1
SELECT Subaccount = ISNULL(h.subaccount, lo.subaccount)
, SecurityID = ISNULL(h.security_id, lo.security_id)
, SecurityName = s.name
, QtyHeldAndPending = ISNULL(h.quantity, 0) +
(CASE WHEN lo.type = 1 THEN lo.resulting_quantity * (-1)
WHEN lo.type = 2 THEN lo.resulting_quantity
ELSE 0 END )
, L.AverageDailyVolume
, XDaysVol = L.AverageDailyVolume * @numDaysPcts
, CutoffVol = L.AverageDailyVolume * @numDaysCutoff
, DaysVolHeld = h.quantity / NULLIF(L.AverageDailyVolume, 0)
, HeldPctNDaysVol = h.quantity / NULLIF((L.AverageDailyVolume * @numDaysPcts), 0) * 100
, TargetedHoldingsUSD = tm.ApprovedPortfolioTarget * iv.value_usd
, CutoffVolUSD = L.AverageDailyVolume * @numDaysCutoff * s.price_usd
, TargetedPctNDaysVol = (tm.ApprovedPortfolioTarget * iv.value_usd) /
NULLIF((L.AverageDailyVolume * @numDaysPcts * s.price_usd), 0) * 100
, DaysVolTargeted = (tm.ApprovedPortfolioTarget * iv.value_usd) /
NULLIF((L.AverageDailyVolume * s.price_usd), 0)
, NDaysCutoff = @numDaysCutoff
, NDaysPcts = @numDaysPcts
FROM subaccount_positions_table h --vGlobalHoldings h
JOIN iv_subaccount_table iv ON iv.subaccount = h.subaccount
FULL OUTER JOIN LiveOrders lo ON lo.subaccount = h.subaccount AND lo.security_id = h.security_id
FULL OUTER JOIN TM_DerivedSecurityTargetDetail tm ON tm.Subaccount = h.subaccount AND tm.SecurityID = h.security_id
LEFT JOIN dbo.security_table s ON s.security_id = COALESCE(h.security_id, lo.security_id)
LEFT JOIN dbo.SecurityLiquidity L ON L.SecurityID = h.security_id AND SourceID = 99
WHERE (h.subaccount = ISNULL(@subaccount, h.subaccount)
OR lo.subaccount = ISNULL(@subaccount, h.subaccount) )
AND status = 1
AND ( h.quantity > (L.AverageDailyVolume * @numDaysCutoff) -- qtyHeld > XDaysVol
OR -- Targeted Vol exceeds cutoff
ISNULL((tm.ApprovedPortfolioTarget * iv.value_usd), 0) >
ISNULL((L.AverageDailyVolume * @numDaysCutoff * s.price_usd), 0) -- Target > XDaysVol
)
ORDER BY ISNULL(h.subaccount, lo.subaccount), ISNULL(h.security_id, lo.security_id)
Thanks in advance!!!
sqlnovice123
View 2 Replies
View Related
Oct 3, 2012
I'm building a report that has a column in the table called countries of origin, that column can contain data like "USA","China" ( normal countries) but some rows can also contain "USA, China, Australia" ( multiple counties in one row).
I'm trying to build a filter to filter my results :
-I have a data set created with a list of all world countries
-I've Build a Parameter containing a drop down list with all countries
--- My problem is when I want to create the filter in my main data set , I can so it , but when I search for example for "USA" , I don't get the lines where there are multiple countries and "USA" is one of them...
There must be an expression in the filter that will be able to search through all the values in the string and return me my correct results.
View 19 Replies
View Related
Feb 23, 2007
I have a DTSX package which reads values from a fixed-length text file using a data reader and writes some of the column values from the file to an Oracle table. We have used this DTSX several times without incident but recently the process started inserting NULL values for some of the columns when there was a valid value in the source file. If we extract some of the rows from the source file into a smaller file (i.e 10 rows which incorrectly returned NULLs) and run them through the same package they write the correct values to the table, but running the complete file again results in the NULL values error. As well, if we rerun the same file multiple times the incidence of NULL values varies slightly and does not always seem to impact the same rows. I tried outputting data to a log file to see if I can determine what happens and no error messages are returned but it seems to be the case that the NULL values occur after pulling in the data via a Data Reader. Has anyone seen anything like this before or does anyone have a suggestion on how to try and get some additional debugging information around this error?
View 12 Replies
View Related
Nov 21, 2007
I have a chart with columns on it, and my boss wants me to display the height of each column on the chart.
Is there a way to do this? I've googled it some, and searched around in the chart properties, but I couldn't find anything.
View 1 Replies
View Related
Jan 27, 2007
am using a line chart to display series of results over time - data is got from and AnalysisServices cube.
problem is that sometimes there is no value for the result - and the chart doesnt display that as zero
e.g. with the following data
week 1 10 items
week 2 12 items
week 3 14 items
week 4 8 items
week 6 12 items
the chart will join the week 4 result of 8 items directly to the week 6 result of 12 items
is there anyway of changing this so the line goes from 8 items on week 4 to ZERO items on week 5 and then 12 items on week 6 ???
View 1 Replies
View Related
Jan 10, 2007
Hi,
I´m working with chart type bar (Simple Bar) and i received four values from stored procedure, all values are negative numbers. The Reporting Service shows the values in the chart, but, doesn't show the "bars".... If one of four values will be positive, the report shows the values and the "bars" but if all values will be negative, the report shows just de values.
What do I do for the bars appear with four negative values ?
Thanks.
View 4 Replies
View Related
May 29, 2015
Link : [URL] .....
This provides a good example for my situation. In this example, you will see a Movie dimension with four attributes; Genre, Language, Movie, and Theme. I have a similar setup except mine is Top Level Hierarchy>Categories>Values which are all under the one hierarchy.
My Question: I have the dimension setup as a multi-value parameter in one of my reports. When I filter on a value in Genre and in Language, it provides all values from that genre and all values from that language. I really only want the values that include both.
Genre - Western: Movie1, Movie2, Movie3
Language - English: Movie2, Movie4, Movie5
If I filter on Western and English, I get Movie1-5 when all I really want is Movie2 only. Is there any way to have this do an Intersect within the same dimension or do I have to build each one out into its own dimension?
View 10 Replies
View Related
Sep 22, 2015
In a table I have some rows with flag A & B for a scode, some scode with only A and some are only B flags.
I would like to fetch all rows with flag A when both flags are present, no rows with B should be fetched. Fetch all rows when only single flags are present for a scode.How to achieve this using TSQL code.
View 2 Replies
View Related
Aug 13, 2007
Hi!
I have table with complex index on 5 fields. One of them is string filed. I want to implement some sort of filtering, by setting SetRange() in my SQLCeCommand. But i need to fileter only by one string field and to get the values starting with the input string value.
I tried to use such code:
...
command.SetRange(DbRangeOptions.Prefix, new object[] {null, null, null, "Com", null}, null);
resultSet = cmd.ExecuteResultSet(ResultSetOptions.Scrollable);
....
But it doesn't work. As a result i've got an empty result set.
Usage of simple index on one field and setting the correspondent range will solve problem, but i can't have such index due to project restrictions.
Is there any way to set prefix range only by one value of complex index? If not, please, explain me how does Prefix Range works.
Thanx
View 1 Replies
View Related
Nov 30, 2007
Hi to everyone.I have this problem in my chart control in report.I am retrieving datas from my database.My x-axis is consist of dates of the year,y-axis is the hit counts.My problem here is when i only have hits in only one month(ex december) and almost over 20 hits are retrieved,the bars of my graph become so overcrowded and overlayed which make the value unclear to see.And also another thing is my legend repeats the color when there are too much data.is there anyway to fix this or this is just a ReportingService bug??Hope not..hehe.. Thanx
View 4 Replies
View Related
Dec 9, 2013
I have SQL Server 2012 SSIS. I have Excel source and OLE DB Destination.I have problem with importing CustomerSales column.CustomerSales values like 1000.00,2000.10,3000.30,NotAvailable.So I have decimal values and nvarchar mixed in on Excel column. This is requirement for solution.However SSIS reads only numeric values correctly and nvarchar values are set as Null. Why?
CREATE TABLE [dbo].[Import_CustomerSales](
 [CustomerId] [nvarchar](50) NULL,
 [CustomeName] [nvarchar](50) NULL,
 [CustomerSales] [nvarchar](50) NULL
) ON [PRIMARY]
View 5 Replies
View Related
Mar 29, 2006
Hi
can somebody explain me how I can assign a NULL value to a datetime type field in the script transformation editor in a data flow task.
In the script hereunder, Row.Datum1_IsNull is true, but still Row.OutputDatum1 will be assigned a value '0001-01-01' which generates an error (not a valid datetime). All alternatives known to me (CDate("") or Convert.ToDateTime("") or Convert.ToDateTime(System.DBNull.Value)) were not successful.
Leaving out the ELSE clause generates following error: Error: Year, Month, and Day parameters describe an un-representable DateTime.
If Not Row.Datum1_IsNull Then
Row.OutputDatum1 = Row.Datum1
Else
Row.OutputDatum1 = CDate(System.Convert.DBNull)
End If
Any help welcome.
View 1 Replies
View Related
Mar 18, 2008
I have a gridview connected to a sqldatasource, and it works pretty good. It gives me the subsets of the information that I need. But, I really want to let them choose all the companies and/or any status. What's the best way to get all the values in the gridview...besides removing the filters :)
I thought the company would be easy, I'd just set the selected value to blank "", and then it'd get them all....but that's not working. And, for the boolean, I have no idea to get the value without having a separate query.
(tabs_done=@tabsdone) and (company like '%' + @company + '%')1 <asp:DropDownList ID="drpdwnProcessingStatus" runat="server">
2 <asp:ListItem Value="0">Open</asp:ListItem>
3 <asp:ListItem Value="1">Completed</asp:ListItem>
4 </asp:DropDownList>
5
6
7 <asp:DropDownList ID="drpdwnCompany" runat="server">
8 <asp:ListItem Value="">All</asp:ListItem>
9 <asp:ListItem Value="cur">Cur District</asp:ListItem>
10 <asp:ListItem Value="jho">Jho District</asp:ListItem>
11 <asp:ListItem Value="sea">Sea District</asp:ListItem>
12 <asp:ListItem Value="san">Net District</asp:ListItem>
13 <asp:ListItem Value="sr">Research District</asp:ListItem>
14 </asp:DropDownList>
15
16
17 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:HRFormsConnectionString %>"
18 SelectCommand="SELECT DISTINCT [id], [lastname], [company] FROM [hr_term] hr where (tabs_done=@tabsdone) and (company like '%' + @company + '%')">
19 <SelectParameters>
20 <asp:ControlParameter ControlID="drpdwnProcessingStatus" DefaultValue="0" Name="tabsdone" PropertyName="SelectedValue" />
21 <asp:ControlParameter ControlID="drpdwnCompany" DefaultValue="" Name="company" PropertyName="SelectedValue" />
22 </SelectParameters>
23 </asp:SqlDataSource>
24
View 3 Replies
View Related
Dec 13, 2007
I can't figure out how to get my line chart to break when there isn't a value. For example, I have a trend line over 4 time periods. The 3rd time period is missing a value. Instead of the line ending at the 2nd period and picking up again at the 4th time period, it's connecting the line 2nd to the 4th period. I'd like it to break and for there to be no line appearing in the 3rd period. I bet that's as clear as mud, but let me know if you have any questions.
Thanks!
sash
View 1 Replies
View Related
Nov 9, 2000
Hi,
My query "select blah, blah, rank from tablewithscores" will return results that can legitimately hold nulls in the rank column. I want to order on the rank column, but those nulls should appear at the bottom of the list
e.g.
Rank Blah Blah
1 - -
2 - -
3 - -
NULL - -
NULL - -
At present the NULLs are at the top of the list, but I do not want my ranking in descending order. Any suggestions?
Thanks
Dan
View 1 Replies
View Related
Sep 3, 2015
I have a table that contains some data.Â
LabelName
LabelValue
TotalForRetire
10337
dummy1
0
TotalForRelatives
5850
dummy2
0
TotalForDisability
7337
TotalForOrange
23
I have a pie chart and a bar chart.
In the pie chart I want to plot only TotalForRetire and TotalForDisability and TotalForOrange
In the bar chart I want to plot only TotalForRetire,dummy1,TotalForRelatives.
Also, here I want the horizontal axis not to show the label  for dummy1 as the value is 0. How can i do that for each chart?
View 2 Replies
View Related
May 20, 2015
Currently I report our monthly fees broken down into 4 weeks per month by using 4 separate datasets with the following code
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
The second dataset then has the date code changed toÂ
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/08/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The third
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/16/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
AND Practice.ibvSalesByJob.[Date] <= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:00'
The fourth
AND Practice.ibvSalesByJob.[Date] >= Cast(@Month AS char(2)) + '/23/' + Cast(@DateYear AS char(4)) + ' 00:00:01'
Now I was hoping so that I could report the above data in one chart and do an expression on the category and group the dates so I would just have one dataset like below but four separate columns saying Week 1, 2 3 and 4 and then the sum filtered in line.
SELECT
SUM(Practice.ibvSalesByJob.JobBilledExVAT) AS Sum_JobBilledExVAT
FROM
Practice.ibvSalesByJob
INNER JOIN Practice.idvJobType
[Code] ....
If I could somehow with SQL tie in all 4 separate datasets and display them as Week 1, 2, 3 and 4 underneath the dataset and selectable.An even simpler solution maybe just understanding how charts work, I can get it so I display the 4 separate weeks in the chart however I can't get the bottom line (Category Group) to display Week 1, 2, 3 and 4.
View 8 Replies
View Related
Feb 28, 2008
Hello,
I need to know what means are available to change the Minimum and Maximum Y-Axis scale values rather than leave them simply as they are in the properties.
Right now whatever min/max values I enter into the scale for the Y-Axis are unchangeable.
I need to be able to change the min/max scale values based on the value of the data at run time.
Any help is appreciated.
Thanks.
View 6 Replies
View Related
Aug 9, 2015
I am using the below expression for hidding the zero data labels in ssrs chart.=IIF(Fields!Name.Value=0,False,True). But this expression is working for some other charts. It is not wrking for only charts. I could not find the solution for that. How to hide the zero values.
View 4 Replies
View Related
Jul 14, 2015
Am using SQL Server 2012 and Visual Studio 2010.
The above chart has three Values in it (slightly late in pink, rather late in hot pink and very late in red). Because of the ordering of these values the red very late values can't be seen. When I shuffle the order around slightly they are indeed there:
...This report runs dynamically for one of a number of activities the user can select, as such I have no way of knowing which of these series will be at the lower end of the scale and which will be at the higher end. Is it possible to set the Values/Series to be transparent so I can be assured that all will be visible to the user at runtime?
View 3 Replies
View Related
Feb 15, 2008
I have a line chart which works great except when the x axis displays duplicate months. I have tried format codes of MM-YYYY and MMM and have the "numeric or time-scale values" checkbox checked. The data displays fine but the X axis in the case of the MMM format code displays as:
Sep Oct Oct Nov Nov
leaving the user to wonder where exactly does October and November start...
I've googled around but don't see off-hand what I am doing wrong. I am display 3 simultaneous lines if that matters...
Thanks!
Craig
View 4 Replies
View Related
Sep 3, 2015
I have an SSIS package that imports data from an Excel file, replaces any value in Excel that reads "NULL" to "", then writes the data to a couple of databases.
What I have discovered today, is I have two columns of dates, an admit date and discharge date column, and what I need to do is anywhere I have a null value in the discharge date column, I have to replace it with the value in the admit date column.Â
I have searched around online and tried a few things using the Replace funtion in Derived columns but no dice so far.Â
View 3 Replies
View Related
