I can't find any info on what the 'IN' operator does when filtering data. What's the syntax? I'm hoping this operator will behave similar to the IN operator in sql. I want to pass in 1 or more values that I'd like my data filtered by. If I say <field> IN <single value> it works, but if I say <field> IN <value1>,<value2> I get back nothing at all. Any claification on the use of this operator and the correct syntax for my value list would be greatly appreciated!!
Hi Friends, i have a question table and i want to filter this table using the following stored procedure but i cannot take a resultset ; (there is no error)
Stored Procedure is here:
CREATE PROCEDURE [dbo].[SP$AllQuestion] @Session nchar(10), @Class nchar(10), @Unit nchar(10) AS BEGIN SELECT L.QID, L.CLASS, L.SESSION, L.UNIT, L.CONTENT as QUESTION FROM tblQUESTION L WHERE @Session IS NULL OR L.SESSION = @Session) AND (@Unit IS NULL OR L.UNIT = @Unit AND (@Class IS NULL OR L.CLASS = @Class) AND ((@Session IS NULL AND @Unit IS NULL ) OR (L.SESSION = @Session AND L.UNIT = @Unit)) AND ((@Session IS NULL AND @Class IS NULL ) OR (L.SESSION = @Session AND L.CLASS = @Class)) AND ((@Unit IS NULL AND @Class IS NULL ) OR (L.UNIT= @Unit AND L.CLASS = @Class)) AND (L.UNIT = @Unit AND L.SESSION = @Session AND L.CLASS = @Class) END
i dont know what my fault is ; to your opinion what i have to do? thanks from now on...
Why is Select * from [Merchandise] where [Product Name] like '[ABCD]%'the same as Select * from [Merchandise] where [Product Name] between 'A' and 'D'I can run Select * from [Merchandise] where [Product Name] like 'A%'and get Products that start with the letter "A" but they don't show up when I try to get all "A","B","C","D" Products.
Our current method of limiting what data a user can see is implemented solely through our Web based business intelligence tools. No filtering is enabled at the database level. This has become somewhat cumbersome as security is tied exclusively to these tools. The tools use one common logon to access the underlying database.
I would like to implement security at the database level (SQL Server 2000) and thereby produce a more flexible/portable solution. I was thinking of setting up individual database accounts for each user and then tying these into our company structure table by passing system_user result to a constraint.
For example System User name 'Store 2' would reference Store '2' in the structure table. Depending on the user, different columns will need to be referenced to filter the rows. A store user would be validated against the store column, an Area Manager user would be validated against the Area Manager column and Head Office users would not be valiadated at all i.e. they are not filtered.
1) What is the best method to implement such a look up. Can or should I use Check constraints for such a solution?
2) Would a UDF be useful?
Any ideas on the best approach to take would be greatly appereciated.
Hi, I have following query. I want to insert the value MBR_COV_EFF_DATE to table fixed_MM if the function dbo.CheckTheDate2 returns correct date and if it returns NULL I want to insert it on error_MM table. How can I do this?
select dbo.CheckTheDate2(MBR_COV_EFF_DATE,'MBR_COV_EFF_DATE') AS MBR_COV_EFF_DATE from [unfixed_MM]
Expression: =Fields!PRACTICE_ID.Value Operator: = Value: 20 and get this error: The comparison failed. Check the data type returned by filter expression.
Practice_id has int data type. How else can I check the data type returned by filter expression?
I tried to filter on table level the same way, and get the same error. Could anybody help, please, to make it work?
Tell me please how can I make a query that updates one table using data from another but not all and not filtered by its field but filtered by a field in a linked table. I've tryed to use usual construction but it doesn't work: UPDATE arch_exm SET reg_num = t1.reg_num, dscp = t1.dscp, checktype = t1.contr_type, mark = t1.mark, contr_date = t1.d_kontr, semester = t1.semester, n_register = t1.n_regist FROM (ses_curr INNER JOIN students ON ses_curr.reg_num = students.reg_num INNER JOIN groups ON students.stgroup = groups.stgroup AND students.stgroup = groups.stgroup INNER JOIN specialties ON groups.speciality = specialties.speciality AND groups.speciality = specialties.speciality) t1 WHERE (t1.arch_store = 1) AND (t1.depart = @depart) So I need to use for update source a table is produced by joining several ones and use a filter in one of its fields but in syntax FROM <table> <name> is supported only one table but not a result of joining. Tell me please how can I describe in SQL using after FROM a result of joining with a filter.
<br><br>I obtain table names from a database and pass them to a dropdownlist. Based on user selection, I want to pass each table name to a query.Here is an extract from my code: <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:ConnectionString %>" SelectCommand="select * from @dDTable"> <SelectParameters> <asp:ControlParameter ControlID="DropDownList1" Name="dDTable" PropertyName="SelectedValue" DefaultValue="product" Direction="InputOutput" Size="15" Type="String" /> </SelectParameters> </asp:SqlDataSource>I keep getting this error: Must declare the table variable "@dDTable".Please does anyone knows the best way to go about this?
Hi, In my application datas are downloaded from "http://www.amfiindia.com/portal/upload/downloadnav.txt;" this website and written on a text file. Downloadnav.txt contens looks like this ------------- Scheme Code;Scheme Name;Net Asset Value;Repurchase Price;Sale Price;Date Open Ended Schemes ( Income ) ABN AMRO Mutual Fund102652;ABN AMRO Monthly Income Plan-Regular Plan-Growth Option;12.8907;12.8907;12.8907;4-Apr-2007102653;ABN AMRO Monthly Income Plan-Regular Plan-Monthly Dividend Option;10.6359;10.6359;10.6359;4-Apr-2007102654;ABN AMRO Monthly Income Plan-Regular Plan-Quarterly Dividend Option;10.5377;10.5377;10.5377;4-Apr-2007102622;ABN AMRO Flexi Debt Fund-Regular Plan-Daily Dividend Option;10.0000;10.0000;10.0000;4-Apr-2007102619;ABN AMRO Flexi Debt Fund-Regular Plan-Growth Option;11.6182;11.6182;11.6182;4-Apr-2007 Birla Sun Life Mutual Fund101843;Birla Bond Index Fund-Dividend Plan (Plan A);10.1607;10.1353;10.1607;4-Apr-2007101844;Birla Bond Index Fund-Growth Plan (Plan B);11.6557;11.6266;11.6557;4-Apr-2007101315;Birla Bond Plus-Insititutional Dividend;10.4411;10.4150;10.4411;4-Apr-2007 ---------------------------------------- I cut .copied datas alone in another text file datafile1.txt which looks like this ------------------------------------------ 102652;ABN AMRO Monthly Income Plan-Regular Plan-Growth Option;12.8907;12.8907;12.8907;4-Apr-2007102653;ABN AMRO Monthly Income Plan-Regular Plan-Monthly Dividend Option;10.6359;10.6359;10.6359;4-Apr-2007102654;ABN AMRO Monthly Income Plan-Regular Plan-Quarterly Dividend Option;10.5377;10.5377;10.5377;4-Apr-2007102622;ABN AMRO Flexi Debt Fund-Regular Plan-Daily Dividend Option;10.0000;10.0000;10.0000;4-Apr-2007102619;ABN AMRO Flexi Debt Fund-Regular Plan-Growth Option;11.6182;11.6182;11.6182;4-Apr-2007101843;Birla Bond Index Fund-Dividend Plan (Plan A);10.1607;10.1353;10.1607;4-Apr-2007101844;Birla Bond Index Fund-Growth Plan (Plan B);11.6557;11.6266;11.6557;4-Apr-2007101315;Birla Bond Plus-Insititutional Dividend;10.4411;10.4150;10.4411;4-Apr-2007 I am bulkinserting this datafile1.txt datas in to the Sqlserver table "Indian stocks".Since Downloadnav.txt has extra description,title That file is not able to bulk insert. Now i have to read/filter downloadnav.txt so that file will look like datafile1.txt. Bulk insert command which i use : Bulk insert INDIAN_STOCKS from 'C:Documents and SettingsAmrithaMy DocumentsKarthikaRobertRobertdatafile1.txt' with (FIELDTERMINATOR=';',ROWTERMINATOR=''); Can anyone tell me how to read txt file and filter it out(elimates titles,spaces).I am trying so hard for the past 1 week couldn't do. Thanks, Karthika
Hi,I have three dropdown lists branch, month & year. Based on these I need to retrieve data in my Datagrid.I have written the following SQL statement & code in my Refreshgrid(): SqlCmd.CommandText = " SELECT * " SqlCmd.CommandText += " FROM HSECData" SqlCmd.CommandText += " where branchno=" &Branchno SqlCmd.CommandText += " And yearno=" &YearNo SqlCmd.CommandText += " And monthno=" &monthNoThis is working fine, initially the datagrid is empty and then displays data when I select say, branch- Melbourne, Year-2005, Month-October and other exisiting combinations.The problem I am stuck at is when the page loads, initially I want all the data to be displayed in datagrid, i.e. for 'All' branches, 'All' years and 'All' months and then when I select combinations of these dropwdown lists as above the data should be filtered and displayed in those selected combinations. but as of now I get and empty datagrid when I select 'All' from these 3 drop down lists or when the page opens the first time.Can someone kindly guide me with the correct SQL cinstruct to achieve both the requirements?Thanks,Aartee.P.S. I am sorry if I have posted this question in a wrong category in the forum, I was unsure whether I should post it in Datagrid category or SQL server category, I thought this was my best bet.My aplogies.
I have a database table which is growing 100,000 recs per day. It has data from 06/01/1999 to current. I need to keep data only from 08/01/1999. I BCP'd out around more than 10 million rows(entire table) out into an OS flat file. Now I need to BCP in rows only after 08/01/1999. How do I filter those rows during BCP'ing in, or is there a way of doing it while BCP'ing out. The table has a field named proc_date smalldatetime(4) NOT NULL.
Hello,I have a simple table containing adresses.A sample view of the table isid name city--------------------------------100 Meier New York101 Meier Tokyo110 Olson Amsterdam110 Olson Dublin111 Paul Berlin...The view is ordered by (name,city)Now my problem:I want to see only the second half of the viewstarting from "Olson" in "Dublin"Using the constraintwhere (name>="Olson") and (city>="Dublin")does not the right thing. It eliminates i.e. row 111.The only idea I have is to concatenate the fields tosimulate the compound index to be able to dowhere name+"~"+city>="Olson~Dublin"not to forget to struggle with null fields to getthe right results. This slows down the simple querydramatically.This seems to be a complicated solution for a simpleproblem, given the fact, that the index is alreadyavailable at the server.Does anyone has an idea or suggestion?-Hubert
I have a stored procedure, which returns a list of results/data.
Some of that data includes a count.
What I would like is to filter the data where we see all the count data that has 0 or all the count data greater than zero.
Now it is entirely possibly for me to go back to the stored procedure and amend it so that that is entirely possible, however i was wondering if it was also possible to produce this by filtering data at the dataset.
I provide a filter at the datset by clicking on dataset and then filters and then the expression for the field for the search count and having a parameter that provides the value.
Now it is straightforward if i just want to show all results where the searchcount = 0.
The problem lies where i want to show all results that have a searchcount > 0. The problem being it only allows me to choose one operator = or >, not a combination of both, meaning I cannot have the option to have either results.
select distinct  bl_rec_ref  ,freq_cd  from hgmprty1 where(bl_rec_ref is not null and bl_rec_ref not like '%SCH%')
That produces the following output (part shown)
However what I need to show is only bl_rec_ref values where there is no corresponding freq_cd of QTLY.
Looking at the example data above Rows 45 and 46 have the same bl_rec_ref value with a MTHLY and a QTLY value in freq_cd so therefore I don't want this to appear in my output. Similarly with Rows 47 and 48 were the bl_rec_ref has both QTLY and MTHLY values so again should be excluded.
However looking at Rows 51 to 55 which has a bl_rec_ref only showing once for each value of MTHLY and no value for QTLY so these Rows are required in the output.
I'm designing a sales report. The user would like to be able to look at individual customers against total sales in a report.
I have a parameter that will allow the user to select from a list of customers. Then I need a column that will show that customers sales and the next column will show total sales. If I filter the data set by Customer I will only get that customer's sales. Can I filter on individual columns?
I tried something like
=Sum(IIF(Fields!Name.Value=Parameters!VendorName.Label,Fields!Coil_Weight.Value/code.Expon(Parameters!Units.Value),0))in the expression but that doesn't seem to work.
I have to filter my some of the data using below sql
select * from dbo.tmp_date where issue_dt <'042015' but its not filtering out because of NVARCHAR an if suppose i used datatype to int its removing 0 (zero) from the begning
My data is in formate MMYYYY formate
CREATE TABLE dbo.tmp_date (issue_dt NVARCHAR(10)); INSERT INTO dbo.tmp_date (issue_dt) SELECT '062012' UNION SELECT '062079' UNION SELECT '062015' UNION SELECT '062014' GO select * from dbo.tmp_date where issue_dt <'042015' go
I have a big presentation tomorrow and I have a query I'm trying to make a little more presentable. query text itself formatted (filtering data)
Tables: --tpeople --tsynclog
The query:
select Firstname+' '+Lastname as [FirstName LastName],synctime as [Nestle synctime],sum(DurationInMinutes) from tpeople join tsynclog on people_id = id where synctime > '2006-05-05' group by tpeople.FirstName,tsynclog.people_id,tpeople.LastName,tsynclog.SyncTime having sum(DurationInMinutes) > 100 order by synctime desc
As you can see I need some alias added and maybe the whole thing formatted a little different. Can anyone help? Thanks.
We are pulling data from a sharepoint list and we have created a report using business development studio in sql 2005 and have created a table with data that we want to display. We are trying to filter this data so that we can get the report to show entries for the day or for a week, but im not sure how to achieve this? Thanks in advance.
I have what at first site should be a simple reporting services issue but cannot resolve:-
I have a complex report comprising over 90 pages of various sections but when analysed in detail , 80% of it follows a simple pattern i.e. it comprises around 100 instances of the same sub-report bound to the same data source BUT grouped and filtered on different groupings and filter values.
The pattern is as follows:-
Each sub-report instance is bound to an SSAS cube which has fields L1, L2...L7
Each sub-report instance groups the data dynamically by one or more groups G1,G2..G7, the actual fields to be used being defined by the parent report (i.e. one instance may group by fields L7, L3, L4, another by L2,L3 etc)
Each sub-report instance has up to 7 filters defined (F1..F7) may filter the data i.e. the parent may pass a filter stipulating that L7="A", L3="B". To do this, the parent sets filter parameters F7="A" and F3="B"
The approach I have adopted is to set up parameters in the sub-report for dynamically grouping the data i.e. the sub-report has 7 parameters defined G1..G7 and the parent report populates G1..G7 with the grouping breakdown required for any given instance. This works fine!!!!
However what I am trying to do is prevent each sub-report performing major round trips to the underlying cube for each sub-report instance by specifying the filter as part of the MDX query by defining the 7 filter parameters as query parameters. (I could of course not filter the query and place the filter in the report but this would almost certainly lead to performance issues). Instead what I am struggling to do is to create the MDX query in such a way that when a filter is not supplied by the parent, the MDX query does not filter the data.
Can anyone advise on this. I guess my question is more of an MDX question than a reporting services one.
Hello, I am trying to use a boolean parameter to filter data in a table, but there is something I am missing.
Basically I want something like this: I have a boolean parameter, "EP", and I have a filter set on my table as:
Expression Operator Value =Fields!REFERRAL_SOURCE.Value = IIF (Parameters!EP.Value, "1297", ????)
Using the filter tab, I can't specify an expression for the 'Operator' so I was trying to work it out using either '=' or 'like'. What needs to go into the ???? in order for the referral source to be "not 1297" (i.e. the inverse of the filter)?
Or, am I completely missing an easy way to do this?
Hi. I am working on a procedure which can filter data through three tables. First Table is User --------------------------- UserName UserID ---------------------------
Second Table is Customer --------------------------- UserID Cust_Site_Int_ID ---------------------------
Third Table is l Details --------------------------------------------------------------- Cust_Site_Int_ID Created_Date Status ----------------------------------------------------------------
I want to create a stored procedure which can filter through these tables. I will have four input fields in my application to accept parameters. The four parameters will be UserName, two date fields which specifies a range of dates and status. I want the filter to work like this, if only one parameter is provided it will use only that parameter if additional parameter is given it will use the AND logic.
I tried to do a Proc but it is not working any way here it is. So you will get a better idea of what I am trying to achieve.
set ANSI_NULLS ON set QUOTED_IDENTIFIER ON go
-- ============================================= ALTER PROCEDURE [dbo].[FilterServiceTickets] -- Add the parameters for the stored procedure here @userName varchar(20)= NULL, @startDate datetime =NULL , @endDate datetime = NULL, @status int = NULL AS BEGIN -- SET NOCOUNT ON added to prevent extra result sets from -- interfering with SELECT statements. SET NOCOUNT ON;
-- Insert statements for procedure here SELECT SERVICE_TICKET.SERVICE_TICKET_CODE, SERVICE_TICKET.PROBLEM_REPORTED, SERVICE_TICKET.CONTACT_NUMBER, SERVICE_TICKET.STATUS FROM aspnet_Users INNER JOIN BuildingAddress ON aspnet_Users.UserId = BuildingAddress.UserID INNER JOIN SERVICE_TICKET ON BuildingAddress.Customer_Site_Int_ID = SERVICE_TICKET.CUST_SITE_INT_ID WHERE ((aspnet_Users.UserName = @userName)OR (@userName=NULL)) AND ((SERVICE_TICKET.STATUS = @status) OR (status=NULL)) AND ((SERVICE_TICKET.CREATED_DATE >=@startDate AND SERVICE_TICKET.CREATED_DATE <=@endDate ) OR (@startDate=NULL)OR (@endDate=NULL)OR(@startDate=NULL AND @endDate=NULL)) END
We have set up reporting in sql 2005 so that we can report from a MOSS 2007 list. At the moment the report is created with all the data from within the list. How could i create a filters so that the user can generate a report by name and date?
I have an MS Access 2002 application that is distributed to a number of PCs around our office. The data for this application is stored on a central SQL Server that is linked in through ODBC.
This application has been in place for two years and working fine. We recently formatted and restored a PC, and now that particular PC has issues with the Access application.
Every time it tries to filter one of the linked SQL tables on a date field, Access goes unresponsive and GPFs out. If it's in a query that is behind a report, I get the old standard 'Catastrophic Failure'. If I open the table and right-click filter or run a query manually, Access GPFs.
I've tried recreating the ODBC, linking the tables through TCP/IP as well as Named Pipes. Nothing fixes it. All Windows and Office updates have been applied. This is not the first time we've reformatted a PC in the office, but we've never had this issue.
I have a multi-tenant database where each row and each table has a 'TenantId' column. I have created a view which has joins on a CTE. The issue I'm having is that entity framework will do a SELECT * FROM MyView WHERE TenantId = 50 to limit the result set to the correct tenant. However it does not limit the CTE to the same TenantId so that result set is massive and makes my view extremely slow. In the included example you can see with the commented line what I need to filter on in the CTE but I am not sure how to get the sql plan executor to understand this or weather it's even possible.I have included a simplified view definition to demonstrate the issue...
ALTER VIEW MyView AS WITH ContactCTE AS( SELECT Col1, Col2, TenantId
I am using SQL 2005. I have a SELECT query in a stored proc with 3 parameters: @subaccount,@numDaysCutoff,@numDaysPcts. The proc needs to be modified to return data when subaccount values are any of these:
FRRIJ FRRIC FRMM ROBECO FRJV MAIL FRUKV FRICE
Currently I use a WHERE condition and am able to get data correctly. However, for a NULL value I should get everything including those not in the above list. Should I use CASE statement instead? How?
@subaccount VARCHAR(8) = NULL , @numDaysCutoff INT = 1 , @numDaysPcts INT = 1
SELECT Subaccount = ISNULL(h.subaccount, lo.subaccount) , SecurityID = ISNULL(h.security_id, lo.security_id) , SecurityName = s.name , QtyHeldAndPending = ISNULL(h.quantity, 0) + (CASE WHEN lo.type = 1 THEN lo.resulting_quantity * (-1) WHEN lo.type = 2 THEN lo.resulting_quantity ELSE 0 END ) , L.AverageDailyVolume , XDaysVol = L.AverageDailyVolume * @numDaysPcts , CutoffVol = L.AverageDailyVolume * @numDaysCutoff , DaysVolHeld = h.quantity / NULLIF(L.AverageDailyVolume, 0) , HeldPctNDaysVol = h.quantity / NULLIF((L.AverageDailyVolume * @numDaysPcts), 0) * 100 , TargetedHoldingsUSD = tm.ApprovedPortfolioTarget * iv.value_usd , CutoffVolUSD = L.AverageDailyVolume * @numDaysCutoff * s.price_usd , TargetedPctNDaysVol = (tm.ApprovedPortfolioTarget * iv.value_usd) / NULLIF((L.AverageDailyVolume * @numDaysPcts * s.price_usd), 0) * 100 , DaysVolTargeted = (tm.ApprovedPortfolioTarget * iv.value_usd) / NULLIF((L.AverageDailyVolume * s.price_usd), 0) , NDaysCutoff = @numDaysCutoff , NDaysPcts = @numDaysPcts FROM subaccount_positions_table h --vGlobalHoldings h JOIN iv_subaccount_table iv ON iv.subaccount = h.subaccount FULL OUTER JOIN LiveOrders lo ON lo.subaccount = h.subaccount AND lo.security_id = h.security_id FULL OUTER JOIN TM_DerivedSecurityTargetDetail tm ON tm.Subaccount = h.subaccount AND tm.SecurityID = h.security_id LEFT JOIN dbo.security_table s ON s.security_id = COALESCE(h.security_id, lo.security_id) LEFT JOIN dbo.SecurityLiquidity L ON L.SecurityID = h.security_id AND SourceID = 99 WHERE (h.subaccount = ISNULL(@subaccount, h.subaccount) OR lo.subaccount = ISNULL(@subaccount, h.subaccount) ) AND status = 1 AND ( h.quantity > (L.AverageDailyVolume * @numDaysCutoff) -- qtyHeld > XDaysVol OR -- Targeted Vol exceeds cutoff ISNULL((tm.ApprovedPortfolioTarget * iv.value_usd), 0) > ISNULL((L.AverageDailyVolume * @numDaysCutoff * s.price_usd), 0) -- Target > XDaysVol ) ORDER BY ISNULL(h.subaccount, lo.subaccount), ISNULL(h.security_id, lo.security_id)
We are using xml to pull data from a custom sharepoint list into sql 2005. We have set a parameter that allows the user to filter the data by surname, however when the user tries to filter the list the drop down box brings up a list of every record, so there are duplicate entries for each surname.
Is there a way of filtering this so that there is only one instance of the users surname instead of it showing all the records?
I have a problem.. I have a report, with subreports, which does the job it was supposed to do. Unfortunately, subreports does not export to Excel very well, so I have to come up with a solution without the use of subreports.
The scenario (keeping it simple)
I have a list of departments. Each department can have multiple costs attached to it. The cost happens on a specific date. Fairly straightforward and simplified
I want to view each departments costs, sorted by month, like this:
Jan - Feb - March - April.... Dep SUM COST
Dep FOR EACH MONTH Dep Dep
... ...
I did this in the old report by passing the department ID and the date interval as parameters to a subreport and have the subreport return the sum of all the fields, which worked fine.
Now that the subreports can no longer be used, I'm struggling on how to sort my output on that date interval. I can group my result pr. department, but how to filter the result so that I get the right numbers in the right month... no luck yet.
As far as I know; I can't use different datasets in one table? I could have made a different dataset for each month...
Anyone know of a way to design this? I'm sure the problem isn't unique. Does one have to aggregate the sums inside the SQL query instead?
