Does anyone know how to query a field in a table where it contains an
ASCII code >= 128 - without looping through every field for every
record in table (using charindex)?
Ex of char I would like to find: ü which is char(252)
I have a column of varchar(2000) but when I use it in a select statement I only get the first 255 characters displayed. (all the data is there as I can see different parts using substring) How do I get the complete column to display?
View 2 Replies View Relatedhi all, I'm after a way to produce a single-lined output of a char/varchar string replicated over 8000 times.
basically I've been given a task to create a stored procedure which can accept any integer to replicate a string X times.
From what I've read the replicate() fn will covert to varchar of max 8000 bytes.
I've thought about creating a UDF to accept the varchar and int and run a loop to keep outputting but 'print' will pass an endline to the buffer which is no good for my loop.
Any help would be great on this. Thanks.
I want to know the individual character ascii code for "нолайн" .
when i try to get using select ascii('л') it's return code as 63 which is not correct (ascii code 63 is for "?").
how to get ascii code for this.
I’m getting ASCII characters in one column of my table. So I want to replace same column value in NON ASCII characters.
Note – values in column must be same
This is a string i am getting from sql server.
00000006637120150522187449637100 Â 34 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
10-000000003444378351108502007 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
 01016800002413                                  Â
10-000000091541378538466562009 Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â Â
 01016800002420                                  Â
                   Â
[Code] .....
Hi,
Can any one tell me
how to find out the count of individual chars in a String
ie., my string is s='ganesh kumar'
my output must be as below
Character Occurance
--------------------
g 1
a 2
n 1
e 1
s 1
h 1
k 1
u 1
m 1
r 1
----------------------
Can any one do it,
This is interview question..
Ganesh
Solutions are easy. Understanding the problem, now, that's the hard part
I need a query to get the first value greater than a specific threshold value
LoadTemp1 LoadTemp2 LoadTemp3 LoadTemp4 TimeStamp
300 200 100 320 12-10-2013 13:30:29
100 250 113 340 12-10-2013 14:20:12
114 339 209 345 12-10-2013 14:45:01
I need to get the first value >= 340 threshold
I need to make a Benchmark on when the first LoadTemp crosses Threshold of 340 and capture the time.
I have a table with code and description as below
create table isin_code
(
code varchar(5),
code_desc varchar(255)
)
go
insert into isin_code values ('aaa','aäsas')
go
insert into isin_code values ('aaa','asâ•šas')
go
insert into isin_code values ('aaa','aâsas')
go
insert into isin_code values ('aaa','asas')
go
I want to identify the list of alt codes available in the table.
I have a table that is made up of the sum of medical, mental health and pharmacy claims. I would like to query that to find instances when the sum of the three claims types are greater than a predetermined threshold.
For example:
Patient 1 Medical = 10,000 (could be 10 records at 1,000 each)
Patient 1 Mental Health = 5,000
Patient 1 Pharmacy = 15,000
Patient 2 Medical = 1,000
Patient 2 Mental Health = 0
Patient 2 Pharmacy = 500
Threshold is 25,000
If I queried the above sample table I would get one record:
Patient 1 30,000 - because 10,000+5,000+15,000 = 30,000 and is greater than the threshold.
I am not sure that a having clause would work though.
Hi Experts,
I have to find the latest file in a folder and export data to a table in sql server.
The code should be something that has to be incorporated into a t-sql stored procedure.
The file name would for example abc_defYYYYMMDD.xls.
would i be able to find the latest file in the folder using the the datestamp (YYYYMMDD) in the filename.
Please note i would have files in other format and names with datestamp attached to it, so the code has to pick specific file for which the file name starts with 'abc_def'
and export data to a table.
Any help would be highly appreciated
Say I have a column called 'NAME' in a table called 'CLIENT' and the values in NAME are Surnames or company names like:
NAME
----------------------
1-FOR-ALL
A.B. SMITH (TOOLS LTD)
BROWN
THOMSON
VW CAR SALES
I want my select to return the first 3 characters, excluding special characters (only characters between 1 and z).
In example, the following would be returned for the data above:
NAME
----------------------
1FO
ABS
BRO
THO
VWC
Say I have a column called 'NAME' in a table called 'CLIENT' and the values in NAME are Surnames or company names like:
NAME
----------------------
1-FOR-ALL
A.B. SMITH (TOOLS LTD)
BROWN
THOMSON
VW CAR SALES
I want my select to return the first 3 characters, excluding special characters (only characters between 1 and z).
In example, the following would be returned for the data above:
NAME
----------------------
1FO
ABS
BRO
THO
VWC
Hi All
I have loaded some data to the application using flat files
which has non english chars.
all the columns in the database are NVARCHAR type.
but in db and in application UI, the non english chars are being diplayed as junk chars. ???121
The application supports UTF-8 format
is there any setting at db level to be modified to display the non english char set as is.
Thanks
Hi,
I am very new to using SSIS.
Trying to import data from MS Access 2000.
I receive the error "
[OLE DB Destination [1907]] Warning: Truncation may occur due to inserting data from data flow column "GENDER" with a length of 255 to database column "GENDER" with a length of 2. " on the source flow.
I have done some googling and came up with this post: http://torontosql.dotnetnuke-portal.com/Default.aspx?tabid=32233 which I thought may help, but it does not.
The query against the access datasource features the column: iif([sex]=1, 'm', 'f'). I tried using left(..., 2) as well, but SSIS is determind to treat the field as 255 characters for some reason.
I don't even particualrly care that the field is 255 chars and the sources is only two, I just want the data in! I have other fields coming up with similar error.
Can someone please advise?
PS, what is th significance of the "External Columns" Vs "Output Columns" on the Input and Output Properties tab in Advanced Editor?
I am really struggling with SSIS, it is not as intuitive as DTS.
finding the first value to cross a specific threshold in SQL Server
LoadTemp1 LoadTemp2 LoadTemp3 TimeStamp
300 350 200 12-10-2013 13:30
177 238 333 12-10-2013 13:05
240 190 170 12-10-2013 12:45
How do I design query to find the first LoadTemp* that cross a threshold of 340 degrees per TimeStamp.
I need to strip some puntcuation from any field in a given table.I'd rather like to avoid using the replace () for each field in thetable.Anyone have a nifty way do this?Is there a special name that I can use in the replace that means theentire row?(other than syntax, something like REPLACE(@ROW,CHAR(39),'') )tiaRob
View 1 Replies View RelatedI have a detail table of comments. I need to grab the fist 50 characters from the comment field from this table. The kick is that I need to get the comments from all of the records in the detail table, as the comments might be less than 50 characters, so i need to pull the comments from the other comment records that apply to the master table record.
right now i have the comments in a join to the master table, but this is causing a few records to be returned....
I guess what i am looking for is a way to grab the comment value from the first record of the detail table.
Hello,
I have a table in SQL Server 2000 which has few triggers. When I try to update a record in that table, I get following message:
Warning: The table '[TABLE_NAME]' has been created but its maximum row size (17275) exceeds the maximum number of bytes per row (8060). INSERT or UPDATE of a row in this table will fail if the resulting row length exceeds 8060 bytes.
where the data I am updating is well less than the field limit. The triggers are stored in syscomments table and when I dropped these triggers, the update statements were executed without this message. Is there anyway I can change the data type of field text in syscomments from nvarchar to ntext?
Thanks
Din
hi,
when i tried to run the following code , the code keeps on running without creating the required table...............
pls can anyone help me to figure out the problem........
waiting for your replies...
int row_head = 3;
int col_head = 3;
TextBox[] columns1=new TextBox[5];
TextBox[] rows = new TextBox[2];
for (int i = 0; i < 3; i++)
columns1[ i ] = new TextBox();
for (int i = 0; i < 2; i++)
rows[ i ] = new TextBox();
columns1[0].Text = "col1";
columns1[1].Text = "col2";
columns1[2].Text = "col3";
rows[0].Text = "rowh1";
rows[1].Text = "rowh2";
String[] description=new string[10];
for (int k = 0; k < 10; k++)
description[k] = k.ToString();
int index_value = 0;
int des_index = 0;
string datatype = "";
string command = "";
SqlConnection sqlCN = new SqlConnection(connectionString);
for (int i = 0; i < col_head + 1; i++)
{
if (i == 0)
datatype += "(col " + i + " varchar(20),";
else if (i + 1 == col_head+1)
datatype += "col" + i + " varchar(20))";
else
datatype += "col" + i + " varchar(20),";
}
MessageBox.Show(datatype);
MessageBox.Show("create table " + textBox1.Text + " " + datatype);
string selectCommandText = "create table " + textBox1.Text +datatype;
MessageBox.Show("executed");
try
{
SqlCommand sqlCmd = new SqlCommand(selectCommandText, sqlCN);
sqlCN.Open();
MessageBox.Show("open ");
// the following command is not executed.....
sqlCmd.ExecuteNonQuery();
MessageBox.Show("open and execu");
for (int i = 0; i < row_head + 1; i++)
{
command="";
if (i == 0)
{
command="' ',";
for(int j=0;j<col_head;j++)
{
if(j+1==col_head)
command+="'"+columns1[j].Text+"'";
else
command+="'"+columns1[j].Text+"',";
}
}
else
{
command = "'"+rows[index_value++].Text+"',";
for (int j = des_index; j < des_index + col_head; j++)
{
if (j +1== des_index+col_head)
command += "'" + description[j] + "'";
else
command += "'" + description[j] + "',";
}
des_index = des_index + col_head;
}
MessageBox.Show("INSERT INTO " + textBox1.Text + " values(" + command + ")");
sqlCmd.CommandText = "INSERT INTO " + textBox1.Text + " values("+command+")";
sqlCmd.ExecuteNonQuery();
}
MessageBox.Show("fini");
selectCommandText = "SELECT * FROM " + textBox1.Text;
sqlCmd = new SqlCommand(selectCommandText, sqlCN);
sqlCmd.ExecuteNonQuery();
SqlDataAdapter sqlDA = new SqlDataAdapter(selectCommandText, sqlCN);
DataSet DS = new DataSet();
sqlDA.Fill(DS);
MessageBox.Show("fini 2");
DataGridView1.DataSource = DS.Tables[0].DefaultView;
}
catch (Exception eio)
{ }}
Sweety
Dear Friends,
I am having 2 Tables.
Table 1: AddressBook
Fields --> User Name, Address, CountryCode
Table 2: Country
Fields --> Country Code, Country Name
Step 1 : I have created a Cube with these two tables using SSAS.
Step 2 : I have created a report in SSRS showing Address list.
The Column in the report are User Name, Address, Country Name
But I have no idea, how to convert this Country Code to Country name.
I am generating the report using the Layout tab. ( Data | Layout | Preview ) Report1.rdl [Design]
Anyone help me to solve this issue. Because, in our project most of the transaction tables have Code and Code description in master table. I need to convert all code into corresponding description in all my reports.
Thanks in advance.
Regards
Ramakrishnan
Singapore
28 March 2007
Hi!
How one can find out the character set/code page set during SQLServer installation?
Thanks,
Fabio
Hi,
Does anybody know where to find out the definition of all the SQL error code
For example, What does error code 4002 means ? What does error code 3146 means ? Thanks.
Does anyone know where to find a simple sample showing you how to use asp.net 2.0 with the login control to direct you to another aspx page using SQL 2000 as the database on a hosted server? I have been beating my head against the wall trying to figure this out and would be very appreciative if anyone knows a place out there that shows this? I can find many sites that show you how to do this with SQL 2005, but not SQL 2000. Thanks - Chris
View 4 Replies View RelatedWe have a sql job type SSIS package that is not populating a database table as expected and I'm trying to figure what why not but I'm not sure where the "code" is. The person that created it said they copied a legacy package (sql 2000) and made modifications to it, then migrated it to the new version. When a legacy package is migrated is there a SSIS solution built? I see you can edit SSIS packages only in BI Development Studio but I'm not sure where to find package.
This post may answer my question but if you have any additional or updated information I'd like to hear it.
http://forums.microsoft.com/MSDN/ShowPost.aspx?PostID=393634&SiteID=1
So, to view or edit the package you have to export it?
Package location
Select the type of storage location to export the package to. The following options are available:
SQL Server
File System
SSIS Package Storage
So do you pick "File System" in order to view it in BI?
Thanks for your help.
Dear all：
I have set the PrecompileScriptIntoBinaryCode property to true,but the Script Component show the message "can't find the binary code" after I finish the script language and save it . What's wrong with it ? I ever tried the same code, and it's OK with no problem. When did the problem happen ?
Please give me a help ....Thanks a lot!
Hi,
Is anyone has store procedure that find city and zipcode by radius (10 miles, 30 miles, 50 miles.......)
and also table that has all zipcodes. I finded one, but it's look like very old one, not updated since 2005
Thanks
Kate
I have 3 database say
db1
db2
db3
I need to setup a script to read all the table names in the database above and then query the database to find the list of Stored Procedure using each table.(SQL Server)
I wrong a custom code in my report - Public shared Function Myfunc and in the header textbox - I tried to reference this code = Code.Myfunc.... the Myfunc gives an error Unrecognized identifier.The code is written in the report properties = Code Tab.
View 4 Replies View RelatedI have mysql type db in which I need computer to search for a key phrase of text that has several hundred occurances inside product table descriptions of products on live site. Once it finds the text, I would like for it to simply remove it, and look for the next occurance of the phrase and repeat the process until all are flagged and removed. I was told their may be a line of sql code that employs such a feature. Can anyone tell me what such a line would be?
View 1 Replies View RelatedHi All,I use Bulk insert to put data to myTable.When the SQL server is in local machin, it works well. But when I putthe data in a sql server situated not locally, then I get a errormessage like this:Could not bulk insert because file 'C:Data2003txtfilesabif_20031130.txt' could not be opened. Operating systemerror code 3(The system cannot find the path specified.).BULK INSERT myTableFROM 'C:Data2003 txtfilesabif_20031130.txt'with (-- codepage = ' + char(39) + 'ACP' + char(39) + ',fieldterminator = ';',rowterminator = '',keepnulls,maxerrors=0)Someone can explan me what the error shows upThanks in advance- Loi -
View 3 Replies View RelatedI have table 'stores' that has 3 columns (storeid, article, doc), I have a second table 'allstores' that has 3 columns(storeid(always 'ALL'), article, doc). The stores table's storeid column will have a stores id, then will have multiple articles, and docs. The 'allstores' table will have 'all' in the store for every article and doc combination. This table is like the master lookup table for all possible article and doc combinations. The 'stores' table will have the actual article and doc per storeid.
What I am wanting to pull is all article, doc combinations that exist in the 'allstores' table, but do not exist in the 'stores' table, per storeid. So if the article/doc combination exists in the 'allstores' table and in the 'stores' table for storeid of 50 does not use that combination, but store 51 does, I want the output of storeid 50, and what combination does not exist for that storeid. I will try this example:
'allstores' 'Stores'
storeid doc article storeid doc article
ALL 0010 001 101 0010 001
ALL 0010 002 101 0010 002
ALL 0011 001 102 0011 002
ALL 0011 002
So I want the query to pull the one from 'allstores' that does not exist in 'stores' which in this case would the 3rd record "ALL 0011 001".
I want to insert a row for a Global user in Table 'A' whenever ADO.Net code inserts a Local user row into same table. I recommended using a trigger to implement this functionality, but the DBA was against it, saying that stored proecedures should be used, since triggers are unreliable and slow down the system by placing unecessary locks on the table. Is this true OR the DBA is saying something wrong? My thinking is that Microsoft will never include triggers if they are unreliable and the DBA is just wanting to offload the extra DBA task of triggers to the programmer so that a stored procedure is getting called, so he has less headache on his hands.Thanks
View 2 Replies View Related