TableName: Employee
Cloumns: EmployeeID
EmployeeName
If I do "Select * From Employee", is there a way to do something like this...
Loop through each result
IterateThroughControls.ID &= dbTable & dbColumnName & "<br />"
End
So that the end result would assign ID values...
EmployeeEmployeeID
EmployeeEmployeeName
So I have been trying to get mySQL query to work for a large database that I have. I have (lets say) two tables Table_One and Table_Two. Table_One has three columns: Type, Animal and TestID and Table_Two has 2 columns Test_Name and Test_ID. Example with values is below:
**TABLE_ONE**
Type Animal TestID
-----------------------------------------
Mammal Goat 1
Fish Cod 1
Bird Chicken 1
Reptile Snake 1
Bird Crow 2
Mammal Cow 2
Bird Ostrich 3
**Table_Two**
Test_name TestID
-------------------------
Test_1 1
Test_1 1
Test_1 1
Test_1 1
Test_2 2
Test_2 2
Test_3 3
In Table_One all types come under one column and the values of all Types (Mammal, Fish, Bird, Reptile) come under another column (Animals). Table_One and Two can be linked by Test_ID
I am trying to create a table such as shown below:
Test_Name Bird Reptile Mammal Fish
-----------------------------------------------------------------
Test_1 Chicken Snake Goat Cod
Test_2 Crow Cow
Test_3 Ostrich
This should be my final table. The approach I am currently using is to make multiple instances of Table_One and using joins to form this final table. So the column Bird, Reptile, Mammal and Fish all come from a different copy of Table_one.
For e.g
Select
Test_Name AS 'Test_Name',
Table_Bird.Animal AS 'Birds',
Table_Mammal.Animal AS 'Mammal',
Table_Reptile.Animal AS 'Reptile,
Table_Fish.Animal AS 'Fish'
From Table_One
[Code] .....
The problem with this query is it only works when all entries for Birds, Mammals, Reptiles and Fish have some value. If one field is empty as for Test_Two or Test_Three, it doesn't return that record. I used Or instead of And in the WHERE clause but that didn't work as well.
Is there a query I can write against an INFORMATION_SCHEMA or against the system tables to determine if a column is an identity column?
View 8 Replies View RelatedI am having trouble trying to find the max of 2 columns in one table. I've tried using a common table expression and a subquery, but can't seem to get the correct results. I want to get the max from refnum, then the max "number" associated with that max refnum along with the date and decision
Table
IDCustomerRefnumnumberdate decision
16511114/17/2015Approved
16521125/1/2015Declined
16531216/10/2015Approved
16542116/15/2015Tentative
Expected
Customer 1 had a max of refnum of 2 and 1st one on number
IDCustomerRefnumnumberdate decision
16531216/10/2015Approved
16542116/15/2015Tentative
I have a business need to create a report by query data from a MS SQL 2008 database and display the result to the users on a web page. The report initially has 6 columns of data and 2 out of 6 have JSON data so the users request to have those 2 JSON columns parse into 15 additional columns (first JSON column has 8 key/value pairs and the second JSON column has 7 key/value pairs). Here what I have done so far:
I found a table value function (fnSplitJson2) from this link [URL]. Using this function I can parse a column of JSON data into a table. So when I use the function above against the first column (with JSON data) in my query (with CROSS APPLY) I got the right data back the but I got 8 additional rows of each of the row in my table. The reason for this side effect is because the function returned a table of 8 row (8 key/value pairs) for each json string data that it parsed.
1. First question: How do I modify my current query (see below) so that for each row in my table i got back one row with 19 columns.
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B
If updated my query (see below) and call the function twice within the CROSS APPLY clause I got this error: "The multi-part identifier "A.ITEM6" could be be bound.
2. My second question: How to i get around this error?
SELECT A.ITEM1,A.ITEM2,A.ITEM3,A.ITEM4, B.*, C.*
FROM PRODUCT A
CROSS APPLY fnSplitJson2(A.ITEM5,NULL) B, fnSplitJson2(A.ITEM6,NULL) C
I am using Microsoft SQL Server 2008 R2 version. Windows 7 desktop.
For our ETL process, we maintain a TransformationList table that has the source view and the destination table. Data is copied from the view into the table (INSERT INTO). I am trying to find column names in the Views that are not column names in the associated Table.
In the below example, want to end up with three records:
1, View1, Column4
2, View2, Column4
2, View2, Column5
I have it almost working, except that there is a table, ChangeColPrefix table, that is used by the ETL process to change some of the view's column name prefixes. Some of the source views have column names with prefixes that do not match the destination table column names. Say view SouthBase has all the column names prefixed with SB - like SBAcct, SBName. And the Destination table of Area District has ADAcct, ADName. There would be a row in the ChangeColPrefix for SouthBase, SB, AD, 1, 2 that would be used by the ETL process to create the INSERT INTO Area District From SouthBase.
I need to use this ChangeColPreifx to find my unmatching columns between my source views and destination tables. With out that table SBAcct and SBName from SouthBase will not appear to match the columns of ADAcct and ADName, but they do match.
I want to end up with these three records as non-matching:
View1, Column4
View2, Column4
View2, Column5
View1 has Salumn2 and View2 has Salumn5, and they must be changed to Column2 and Column5 as per the ChangeColPrefix table before running the Select from INFORMATION_SCHEMA.COLUMNS EXCEPT Select from INFORMATION_SCHEMA.COLUMNS looking for unmatched columns.
/***** Set Up Test Data *****/
-- Create 2 test views
IF EXISTS(SELECT * FROM sys.views WHERE object_id = OBJECT_ID(N'[dbo].[View1]'))
DROP VIEW dbo.[View1]
GO
CREATE VIEW View1
AS SELECT '1' AS Column1 , '2' AS Salumn2 , '4' AS Column4;
[Code] ....
is it possible to find out all the data about the table so I need Table columns, type etc.
View 1 Replies View Related
I got a table in sql server....
i don't know the field name where data is present.
i just want to search and find, where data is present in any field of that table.
How can i do?. I forgot that SQL.
Please help me.
I need to find a table and column name from some given data. I know what data i want to edit, I just need to know where it is located and the database is too big to manually go through. It is Microsoft sql server 2000. Any help is appreciated.
View 9 Replies View RelatedHere is an issue that has me stumped for the past few days. I have atable called MerchTran. Among various columns, the relevant columns forthis issue are:FileDate datetime, SourceTable varchar(25)SQL statement:SELECT DISTINCTFileDate, SourceTableFROMMerchTranORDER BYFileDate, SourceTableData looks like this:FileDate DataSource-----------------------------------2005-02-13 00:00:00.000S12005-02-13 00:00:00.000S22005-02-13 00:00:00.000S32005-02-14 00:00:00.000S12005-02-14 00:00:00.000S22005-02-14 00:00:00.000S32005-02-15 00:00:00.000S22005-02-15 00:00:00.000S32005-02-16 00:00:00.000S12005-02-16 00:00:00.000S22005-02-16 00:00:00.000S32005-02-17 00:00:00.000S12005-02-17 00:00:00.000S22005-02-18 00:00:00.000S12005-02-18 00:00:00.000S22005-02-18 00:00:00.000S32005-02-19 00:00:00.000S12005-02-19 00:00:00.000S3We run a daily process that inserts data in to this table everyday forall 3 sources S1, S2, S3Notice how some data is missing indicating the import process for thatparticular source failed.Example: Missing record2005-02-15 00:00:00.000S12005-02-17 00:00:00.000S32005-02-19 00:00:00.000S2Can someone please help me with a SQL Statement that will return me the3 missing records as above.Thanks in advance for all your help!DBA in distress!Vishal
View 4 Replies View Relatedhow to find who delete/Truncate the data from table ,because i don't have any trigger on the table.
View 5 Replies View RelatedI need to find the history in SQl server.
I need to find the data, When was data last inserted/updated/deleted in a specific table?. is it possible?
Table name: Employee
Can you create an UPDATE TRIGGER and use some typeof code to figure out which SP just updated the current table?If not how can i achieve what i want?I tried to run SQL Profiler and i don't understand why i can'tsimply have the Profiler filter events only for the specific database idand the table's object id i chose?What am i doing wrong with SQL Profiler? I was testing thisthrough SQL EM. I had the filters chosen for a specific database idand a specific table's object id, yet when i open another table SQLProfiler captures that information too.Thank you
View 2 Replies View Related
Is there a Tool/Utility/StoredProcedure/Query/View that can tell me the last time the data in a particular table was changed?
That change can be the result of either an ADD , INSERT, or DELETE statement.
I am using SQL Server 2005.
how to find the columns names in a table in sql 2008r2.
as i need to compare the midsing fields in the table from two database.
I have created some dynamic sql to check a temporary table that is created on the fly for any columns that do contain data. If they do the column name is added to a dynamic sql, if not they are excluded. This looks like:
If (select sum(Case when [Sat] is null then 0 else 1 end) from #TABLE) >= 1 begin set @OIL_BULK = @OIL_BULK + '[Sat]' +',' END
However, I am currently running this on over 230 columns and large tables 1.3 mil rows and it is quite slow. How I can dynamically create a sql script that only selects the columns in the table where there is data in a speedier manner. Unfortunately it has to be on the fly because the temporary table is created on the fly.
I have a table which is referenced in multiple stored procedures .Among them only one procedure loads data (INSERT statement) to the table. In all other procedures table is referenced in FROM clause.
My question is how do i find the stored procedure that is actually loading data into that table.
I have a SQL text column from SP_who2 in table #SqlStatement:
like 1row shown below :
"update Panel set PanelValue=7286 where PanelFirmwareID=4 and PanelSettingID=9004000"
I want to find what table and column names are in the text ..
I tried like below ..
Select B.Statement from #sp_who2 A
LEFT JOIN #SqlStatement B ON A.spid = B.spid
where B.Statement IN (
SELECT T.name, C.name FROM sys.tables T
JOIN sys.columns C
ON T.object_id=C.object_id
WHERE T.type='U'
)
Something like this : find the column names and tables name
I am looping through all the databases for a table and trying to insert data into two columns in that table. So evrything seems right. but when i run the program it says
Msg 515, Level 16, State 2, Line 4
Cannot insert the value NULL into column 'OrganizationID', table 'DesMoines_DEV.dbo.Organization'; column does not allow nulls. INSERT fails.
I think writing a dynamic query that produces a series of insert statements is wrong... Instead a dynamic query that execute insert statements one by one may work... But I couldn't figure how to approach..
Below is the code
SET @dbLoop = CURSOR FOR
SELECT name
FROM sys.Databases
WHERE name NOT IN ('master','model','msdb','tempdb')
AND State_desc = 'ONLINE'
[Code] ....
I have a table named tbOrders. I want to swap the data between 2 of its columns named OrderNumber and CaseNumber.
Both the columns are varchar datatype. How can i swap the data between the two columns?
I am looking solutions to import csv data into my SQL database table. BUT we want to collect the data from specific columns in the csv file, (NOT the whole csv file) into SQL Database Table.
View 4 Replies View RelatedI have an table with duplicate data. I need to delete the duplicate records based on the RequestId.
I want to delete the records based on the RequestID 1001, Delete the duplicates in 1002, 1003 .
DECLARE @table TABLE ([Employee_SID] [int] NOT NULL,
[CalculatedTotalSalesYear] [numeric](19, 2) NULL,
[CalculatedTotalSalesYearAnnualized] [numeric](19, 2) NULL,
[RequestID] [int] NOT NULL)
[Code] ....
Expected Result
select * from @table
Hey all
I have a bulk insert situation that would be nice to be able to pull off. I have a flat file with 46 columns that are to go into a table. The table, I want to have a 47th column to be updated later on by means of a stored proc saying if the import into the system was sucessful or not. I have the rowterminator set as '"' thinking that would tell SQL to begin on the next row, leaving the importstatus column null but i still receive an error.
First of all, is this idea possible within this insert statement. Secondly, if so, what would be the syntax to tell the insert statement to skip that particular column. It is the last column listed in the table so it just needs to start on the next row after it inserts the last bit of data in the flatfile.
If this is not possible, is it possible to bulk insert into a temp table?
Thanks
IF (SELECT OBJECT_ID('t1')) IS NOT NULLDROP TABLE t1GOCREATE TABLE t1 (c1 INT, c2 INT)DECLARE @n INTSET @n = 1WHILE @n <= 454BEGININSERT INTO t1 VALUES (@n, @n)SET @n = @n + 1ENDSELECT name, indid, CASE indidWHEN 0 THEN 'Table'WHEN 1 THEN 'Clustered Index'ELSE 'Nonclustered Index'END AS Type,dpages, rowcntFROM sysindexesWHERE id = OBJECT_ID('T1')name indid Type dpages rowcnt---- ----- ---- ------ ------NULL 0 Table 2 454I have a table containing 454 rows of two columnsof type INT with each being 4 bytesc1 int = 4 bytes+c2 int = 4 bytes=8 bytes per rowIf I entered 454 rows : 454 * 8 = 3,632 byteseach SQL Page is 8KB = 8 * 1024 bytes= 8,192 bytesa data page header takes the first 96 bytesleaving 8096 bytes for data and row offsets.Each record uses a row offset at the end of the pageconsisting of 2 bytes. 454 * 2 = 908 bytes.8096 - 3632 - 908 = 3,556 bytes. Should this befree data bytes?For a heap table, does SQL add an internal uniqueidentifiercolumn also? or my question is when does SQL adda uniqueidentifier? I am reading Inside SQL 2000 andtrying to understand a few things.A uniqueidentifier of 4 bytes gets added when a clustered indexexists but it is NOT a UNIQUE clustered index. AND onlyif duplicate record is added those two records only geta uniqueidentifier value.But in my example it's a heap table with no indexes. Evenon a heap table with no indexes a ROWID or Uniqueidentifierget added? Based on the INSERT statement above allvalues are unique.So what am I missing to understand why 453 rowsmake one data page to be used whereas 454 rowsmake two data pages to be used?Thank you
View 1 Replies View RelatedHi ,
My Input is a flat file source and it has spaces in few columns in the data . These columns are linked to another table as a foreign key and when i try loading them in a relational structure Foreigh key violation is occuring , is there a standard method to replace these spaces .
what approach should i take so that data gets loaded in a relational structure.
for example
Name Age Salary Address
dsds 23 fghghgh
Salary description level
2345 nnncncn 4
here salary is used in this example , the datatype is char in real scenario
what approach should i take to load the data in with cleansing the spaces in ssis
Sorry for the confusing subject. Here's what im doing:I have a table of products. Products have N categories andsubcategories. Right now its 4. But there could be more down theline so it needs to be extensible.So ive created a product table. Then a category table that has manycategories of products, of which a product can belong to N number ofthese categories. Finally a ProductCategory "match" table.This is pretty straigth forward. But im getting confused as to how towrite views/sprocs to pull out rows of products that list all theproducts categories as columns in a single query view.For example:lets say productId 1 is Cap'n Crunch cereal. It is in 3 categories:Cereal, Food for Kids, Crunchy food, and Boxed.So we have:Product----------------1 Capn CrunchCategories-----------------1 Cereal2 Food for Kids3 Crunchy food4 BoxedProductCategories------------------1 11 21 31 4How do I go about writing a query that returns a single result set fora view or data set (for use in a GridView control) where I would havethe following result:Product results---------------------------------ProductId ProductName Category 1 Category 2Category 3 Category N ...------------------------------------------------------------------------1 Capn Crunch Cereal Food for Kids Crunchy foodBoxedAm I just thinking about this all wrong? Sure seems like it.Cheers,Will
View 1 Replies View RelatedHi all,
I am facing a problem on validating the data from a flat file while inserting the data into the destination table of sql server 2005 database. In my package, i have to validate the input data whether the values are coming as null or not, before inserting into the destination database. The flat file may not contain data for all NOT NULL columns. I have to find out that row(s) and reject the record. If the rows are coming as Null for the Not Null columns, the OLEDB Destination throws OLEDB exception for the constraint.
To resolve this, i have an script component in data flow, to check whether the input data is coming as null. I have added the output column of boolean type to the script component, it will be assigned to TRUE when there is null for the Not Null column in the script.
And in the follwing conditional split, i am checking the flag for TRUE to reject the record.
Is there any other way to handle this validation?
Regards
Madhav
Running SQL Server 2005, trying to develop an SSRS report to basically pivot a table of data with multiple columns.
Here's the basic source table:
Day Cases Referrals Vends
1 291 0 0
2 293 1 0
3 293 1 1
And I want to display it as:
Day 1 2 3
Cases 291 293 293
Referrals 0 1 1
Vends 0 0 1
I thought I could use a matrix for this but I can't seem to get it worked out. Is this even possible?
The Day number is meant to represent the day of the month and the user would input a start and ending date parameter.
I have a excel sheet with some data and blank columns. I have a ssis package using to import data from excel to sql table. For blank excel columns it is importing as null instead i want to show them as '0'. If data comes in it should update the data.
View 8 Replies View RelatedHi,I have an Excel file with 400 rows of old values and the correspondingnew values. My table currently has 10 columns out of which 3 columnsuse the old value specified in the excel file. I need to update thoseold values in the columns with the new values from the Excel file.Please guide me as to how to proceed with this.Thanks in advance!
View 4 Replies View RelatedHi:
I have a data flow task in which there is a OLEDB source, derived column item, and a oledb destination. My source is a SQL command, that returns some values. I have some values, that I define in the derived columns, and set default values under the expression column. My question is, I also have some destination columns which in my OLEDB destination need another SQL command. How would I do that? Can I attach two or more OLEDB sources to one destination? How would I accomplish that? Thanks
MA2005
Hi is there any way to find no. of columns in a database table
like we can do that in Oracle by typing DESC tablename
San
I have 3 database say
db1
db2
db3
I need to setup a script to read all the table names in the database above and then query the database to find the list of Stored Procedure using each table.(SQL Server)