Find Record Where 1 Field Value Has Changed
Apr 2, 2015
I need to find all items in an inventory table where a field has been unticked in the last 24 hours (there is no audit trail), as well as the contract number of the contract it has been added to (it will not have existed in that table before).
These are the two table querys in their basic form:
select item (nvarchar(20)), inactive (bit) from inventory
select item (nvarchar(20) , contract (nvarchar(20)) , original_start_rent (datetime) from deltickitem
I would like to see just the item number and the contract number it has been added to.
View 11 Replies
ADVERTISEMENT
Aug 14, 2001
Is there any method so that I can find that the particular user has changed the record in the particualr table..?
View 1 Replies
View Related
Sep 19, 2015
The "Last" function in the query below (line 4 & 5) is not exactly what I'm after. The last function finds the last record in that table, but i need to find the most recent record in the table according to a date field.
Code:
SELECT
tblinmate.statusid,
tblinmate.activedate,
Last(tblclassificationhistory.classificationid) AS LastOfclassificationID,
Last(tblsquadhistory.squadid) AS LastOfsquadID,
tblperson.firstname,
tblperson.middlename,
tblperson.lastname,
[Code] ....
The query below finds the most recent record in a table according to a date field, my problem is i dont know how to integrate this Query into the above to replace the "Last" function
Code:
SELECT a.inmateID,
a.classificationID,
b.max_date
FROM (
SELECT tblClassificationHistory.inmateID,
tblClassificationHistory.classificationID,
[Code] .....
View 1 Replies
View Related
Nov 27, 2006
Currently I have the following stored procedure which simply adds a new row in my SQL Express 2005. What I want is that -1). before inserting the record find out the new ID (primary key) value. (ID is automatically a sequential integer generated by SQL Server)2). and set COMPANY_ID = (new) ID Any thoughts? Thanks ALTER PROCEDURE usp_tbl_Company_Insert @Company_ID int, @Name varchar(200), AS<FIND THE NEW ID of the new row in the database> @Company_ID = (new ID) INSERT INTO tbl_Company (Company_ID, Name,)VALUES (@Company_ID, @Name)
View 1 Replies
View Related
Feb 1, 2008
First of all, let me apoligize if this is a stupid question, but just a few days ago I decided to change my FE/BE database from Ms Access to SQL Server Express. Now I have a FE in ACC2002 and a BE in SQL SERVER (the two connected via ODBC). Anyway, this is my question:
When everything was in Access I had a form retreiving a series of records based on a filter - for understanding purpose let's say that a field must have been 'Not Null'. The operator then filled that field with data. With Access everything was static, and the operator could see all the records, the ones already changed and the ones not changed. With SQL now: everytime the operator fills in the field, the record changes to #Deleted. I assume that that is happening because the query - someway - is "alive" and is "filtering data alive"... or is updating records instantly. Just to make things more clear: is the record changed immediately so it is not considered part of the filtered data by the query, thus being change to #Deleted? What could I do to prevent this?
Thanks a lot for your help.
View 3 Replies
View Related
Mar 3, 2005
I apologize in advance if this has been posted but if you get the attached error "The record has been changed by another user...", we've discovered that this error can occur if you have a SQL Server Data Type of "Float" and also a "Text" Data Type in the same table. We discovered that it only happens on some records though and I am not sure why this is so. The solution is apparently to add a TimeStamp Data Type to the SQL Server table which does seem to fix the problem. If anyone has any insight on any other solutions (we cannot change the Data Types) or the reasoning behind this error, I would greatly appreciate the feedback.
View 4 Replies
View Related
Feb 28, 2008
Hi,
I have a small question regard how to find out if a specific table has chanced.
Is there any (sql)function inside MSSQL2005 that I can use to find if a spesific table has changed? I have heard of timestamp, but I don't know if that will solve my problem? Is there any thing in the sys.tables that kan help me, just do a fast query and check if a table has changed?
I'm developing a web-application with AJAX.NET, and I have UpdatePanels with datalist. When the tables in the db gets big the application is henging for a sec or two when it receiving the data, and when the timer (refresh rate) is 2 min it is not good! So my plan is to check if the table has chanced since last transfer of data, and if it has it will download the data, if not do nothing.
Jonny
View 4 Replies
View Related
Jul 9, 2002
I am getting the following error while trying to update a SQL Server 7.0 table thru' MS Access('97 version). It was working fine until now. This problem started happening after re-linking the table to MS Access as new columns have been added on the SQL Server table. We tried re-starting the MS Access,re-linking the table again,giving all the permissions to the user on the table etc. Also, no other user is accessing the table at the same time..Any help?
Error message in MS Access:
This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made.
Copying the changes to the clipboard will let you look at the values the other user entered, and then paste your changes back in if you decide to make changes.
thanks,
Mike.
View 1 Replies
View Related
Oct 9, 2001
The following error is recieved when updating a record using access 97 and odbc driver to an oracle database.
This record has been changed by another user since you started editing it. If you save the record, you will overwrite the changes the other user made.
Any help is greatly appriciated.
Thanks in Advance
View 1 Replies
View Related
Mar 27, 2008
Is there a Tool/Utility/StoredProcedure/Query/View that can tell me the last time the data in a particular table was changed?
That change can be the result of either an ADD , INSERT, or DELETE statement.
I am using SQL Server 2005.
View 3 Replies
View Related
Apr 21, 2015
I have an online SQL Server database, and my web site registered clients can change the records of this database. My need: if a record of this database is changed, whole the changed record send to me and to the person who changed it immediately. I thought it could be possible through Transact-SQL,
View 2 Replies
View Related
Jul 22, 2014
I have a table (represented by #Events) that holds modifications made to another table. I do have some control over the table structure and indexing. I want to pull all of the change records that were made between two dates.
The tricky part is to include the previous version of each record, which will usually be found prior to the start date in question.
The code that I have provided below works. So you can use it to easily see what should be returned. But it's very slow in production.
Any better method to pull this data together?
-- Production version of this table has 4.5 million rows (roughly 1,000 rows per day)
-- Primary key is on L4Ident (clustered)
-- nonclustered index on ProcessDate, LinkRL4
DROP TABLE dbo.#Events;
DROP TABLE dbo.#Results;
CREATE TABLE dbo.#Events (
L4Ident int IDENTITY(1,1) NOT NULL,
[Code] ....
View 4 Replies
View Related
Apr 23, 2015
I am programming an online game (such as chess) which two players can play together online.
Each one of the players should have installed the game application (developed by C#) on their computers.
When a player do some action, a record of a database (SQL Server 2012) which has been placed on the internet will be changed.
My need: when a record of this online database changes, whole the record send to both players' game application immediately.
View 3 Replies
View Related
Jul 22, 2015
isn't there an automatic log of some sort to check and see what exactly was changed by a given SQL command? A stored proc was ran and I need to figure out what exactly it changed in the underlying table.
View 3 Replies
View Related
Mar 24, 2007
I tried checking to see if the point at which the reader was, that if it was the record I am looking for to go ahead and add the table data to a label. But for some reason it's only taking the first record in the database and not the one I thought I was at.[CODE] public void UpdateMaleHistLbl() { SqlConnection conn = new SqlConnection("Server=localhost\SqlExpress;Database=MyFamTree;" + "Integrated Security=True"); SqlCommand comm = new SqlCommand("SELECT * FROM FatherHistTable, MotherHistTable, UsersTable WHERE UsersTable.UserName = @usrnmeLbl ", conn); comm.Parameters.AddWithValue("@usrnmeLbl", usrnmeLbl.Text); conn.Open(); SqlDataReader reader = comm.ExecuteReader(); while (reader.Read()) { string usr = reader["username"].ToString(); usr = usr.TrimEnd(); string pss = reader["password"].ToString(); pss = pss.TrimEnd(); if (usrnmeLbl.Text == usr) { if (hiddenpassLbl.Text == pss) { maleHistLbl.Text = reader["GG_Grandfather"] + " > "; maleHistLbl.Text += reader["G_Grandfather"] + " > "; maleHistLbl.Text += reader["Grandfather"] + " > "; maleHistLbl.Text += reader["Father"] + " > "; maleHistLbl.Text += reader["Son"] + " > "; maleHistLbl.Text += reader["Grandson"] + " > "; maleHistLbl.Text += reader["G_Grandson"] + " > "; maleHistLbl.Text += reader["GG_Grandson"] + "<br /><br />"; } } break; //exit out of the loop since user found } reader.Close(); conn.Close(); }}[/CODE]Thanks in advance
View 1 Replies
View Related
Dec 15, 2005
I need to essentially do 2 loops. One loops through each record and then inside each record row, I want to perform an insert on each column.
Something like this maybe using a cursor or something else:
For each record in my table (I'll just use the cursor)
For each column in current record for cursor
perform some sql based on the current column value
Next
Next
So below, all I need to do is figure out how to loop through each column for the current record in the cursor
AS
DECLARE Create_Final_Table CURSOR FOR
SELECT FieldName, AcctNumber, Screen, CaseNumber, BKYChapter, FileDate, DispositionCode, BKUDA1, RMSADD2, RMSCHPNAME_1, RMSADDR_1,
RMSCITY_1, RMSSTATECD_1, RMSZIPCODE_1, RMSWORKKPHN, BKYMEETDTE, RMSCMPNAME_2, RMSADDR1_2, RMSCITY_2, RMSSTATECD_2,
RMSZIPCODE_2, RMSHOMEPHN, BARDATE, RMSCMPNAME_3, RMSADD1_2, RMSADD2_3, RMSCITY_3, RMSZIPCODE_3, RMSWORKPHN_2
FROM EBN_TEMP1
OPEN Create_Final_Table
FETCH FROM Create_Final_EBN_Table INTO @FieldName, @AcctNumber, @Screen, @CaseNumber, @BKYChapter, @FileDate, @DispositionCode, @BKUDA1, @RMSADD2, @RMSCHPNAME_1, @RMSADDR_1,
@RMSCITY_1, @RMSSTATECD_1, @RMSZIPCODE_1, @RMSWORKKPHN, @BKYMEETDTE, @RMSCMPNAME_2, @RMSADDR1_2, @RMSCITY_2, @RMSSTATECD_2,
@RMSZIPCODE_2, @RMSHOMEPHN, @BARDATE, @RMSCMPNAME_3, @RMSADD1_2, @RMSADD2_3, @RMSCITY_3, @RMSZIPCODE_3, @RMSWORKPHN_2
WHILE @@FETCH_STATUS = 0
BEGIN
@Chapter = chapter for this record
For each column in current record <---- not sure how to code this part is what I'm referring to
do some stuff here using sql for the column I'm on for this row
Next
Case @Chapter
Case 7
Insert RecoverCodeRecord
Insert Status Code Record
Insert Attorney Code Record
Case 13
Insert Record
Insert Record
Insert Record
Case 11
Insert Record
Insert Record
Insert Record
Case 12
Insert Record
Insert Record
Insert Record
END
close Create_Final_Table
deallocate Create_Final_Table
View 2 Replies
View Related
Aug 12, 2014
I want Compare two Table data and insert changed field to the third table ...
View 9 Replies
View Related
Mar 22, 2007
Code:
"SELECT " & _
"Asset_Number, Inv_ID " & _
"FROM " & _
"tbl_Asset "
OKay looking at this highly simplified query here is my problem.
We have a ton of Asset numbers that are the same and for each asset number the inv_id should also be the same.....
However, since this data gets entered by humans - sometimes the inv_id is wrong....
I need to figure out a query that fleshes out the rows where asset_nums are the same but inv_id is different than other rows...?
Of course this may be impossible.....
I mean what if there was only two records by the same asset_num and each inv_id was different?
How could the query know which was the right one......
I need to run a report that finds the invalid inv_id's so that they can corrected.....
any thoughts on how this is done?
My thoughts are - using an inner select...
something to the effect of :
SELECT ....
FROM
(SELECT * WHERE (inv_id = inv_id) > 1)
GROUP BY asset_num.........
I just dont know exactly what the correct syntax is....
muchas gracias....
(btw this is actually ms-sql but mysql forum is so much more popular and the syntaxes are similar enough....thank you...)
View 2 Replies
View Related
Apr 14, 2008
sno Empid Address Date
------------------------------------------------
1100bhopal2008-01-02 00:00:00.000
2100indore2008-02-02 00:00:00.000
3100gwalior2008-03-03 00:00:00.000
4101gwalior2008-01-02 00:00:00.000
5101Indore2008-02-02 00:00:00.000
6102bhopal2008-01-01 00:00:00.000
------------------------------------------------
I want last update Address of employee from this table like
100 Gwalior
101 Indore
102 Bhopal
pls help me out ...............
Yaman
View 2 Replies
View Related
Mar 20, 2007
hi all,
if we have 100 same records, how can we select any 50 of it? thanks
~~~Focus on problem, not solution~~~
View 20 Replies
View Related
Feb 8, 2005
I have a mystery database on my hands...it is part of an application that my company bought, and it uses SQL server for its backend. The reporting features built in are not good enough, so I need to write some queries by hand...trouble is I am having a hard time figuring out how the schema works...using the front end they gave us I put a value of "12345" for a field I need to get to, but I can not locate where in the db it gets stored....can anyone tell me a way to query that will look at every single record and every single field in the db to find the value "12345"??
View 14 Replies
View Related
Oct 15, 2013
I have a table called Register that has the following in it
Policy_number, Policy_date_time, Portfolio_set, Status..The rule for the table is that the last record for each portfolio_set for a policy the status needs to be 'A' but there have been instances that the last record status is 'I'
I need to identify the record that is out of place..In the example below record number 2.
example
policy_number Policy_date_time Portfolio_set, status
12345 1/1/2011 1 I
12345 1/2/2011 1 A
12345 1/3/2011 1 I
12345 1/4/2011 1 I
I need to identify that the second record is in the wrong place...
View 4 Replies
View Related
Sep 23, 2007
Hello
I need an alarm or raise an event from SQL Server after updating to get it in .net.
I use SQL Server 2005 Express Edition and vb.net2 for my programming language.
Suppose that in a windows form I have a grid and I'm working with this page
another client is working with this same page .He is editing the information of
a record of a grid and save it in database so I want to give an alarm or an event
that raise from SQL Server (for example in a trigger) , what can I do?
Thanks.
View 3 Replies
View Related
Jul 23, 2005
Is there a way to tell who or what process deleted a record in a SQL table.I know you can setup triggers or Profiler - but is there a way to see how arecord was deleted if you DO NOT have a trigger or Profiler already running?This is SQL 2000 Standard, sp3a with default options and configuration.Thanks
View 2 Replies
View Related
Dec 11, 2007
I have a select statment that gives me an error, cannot go more than rowsize 8094.
I am trying to find the particualr record/acctno, where the rowsize is excedding the max limi of 8094 chars. Once I have the acctno, I will correct it.
But how do I find which acct has this issue? Bascailly how can I find which record size is more than 8094 chars?
View 1 Replies
View Related
Oct 29, 2014
We have a work order notes table in our ERP system, and I want to see the most recent note record for each work order. Sometimes there will one be one, so I want to see all those, but sometimes there will be several notes for each work order and in this case I want to see only the most recently added note for that work order.
The query below shows some results as an example. In this case I want to see all the records except for work order number DN-000023 where I only want to see the note dated/timed 07-12-2011 16:52 (the most recent one).
select id, worknumber, date, notes from worksordernotes
id worknumber date
----------- ------------ ----------------------- --------------------
1 DN-000056 2011-12-07 13:22:00 13.20 PM JAMES- SPOK
2 DN-000079 2011-12-07 14:24:00 JCB HAVE TOLD ME THE
4 DN-000065 2011-12-07 15:48:00 ANDY FROM SITE RANG
5 DN-000023 2011-12-07 15:54:00 CHASED THIS 4 TIMES
6 DN-000023 2011-12-07 16:52:00 HOLTS ATTENDED THIS
7 DN-000092 2011-12-08 09:50:00 RETURNING WITH PARTS
View 3 Replies
View Related
Oct 12, 2007
I have a table with member information. Each member has multiple effective dates. I would like to query to find the record for each member that has the maximum effective date. A sample table is below:
MEMBERID EFECTIVEDATE
------------ ------------------
699361401 20070101
699361401 20070501
732612701 20070101
732612701 20070501
575424301 20070101
575424301 20070501
192939801 20070101
192939801 20070501
458645001 20070101
458645001 20070501
View 4 Replies
View Related
Sep 18, 2015
I need to build a CTE query to find for the same Cabstamp (document) where i have different Origin.
I know that i can build this with a correlated subquery, but i´am curious about using CTE.
I post sample create Script:
create table #temp (Cabstamp varchar(10), account varchar(10),document varchar(15), origin varchar(2), debit numeric(10,2), credit numeric(10,2), datalc datetime)
insert into #temp (Cabstamp,account,Document, origin, debit, credit, datalc)
select 'ADM12345',111,'CMP-01','FO',1000,0, '20150110'
union
select 'ADM12345',112,'CMP-01','FO', 500, 0,'20150110'
union
select 'ADM12345',6811,'CMP-01','DO',0,1500,'20150110'
union
[code]....
View 5 Replies
View Related
Jul 15, 2015
I have 2 tables .Lets Say tableA and tableB.Both Have Columns ClaimNumber,Amount. Now, to get the matched records for these 2 tables, i wrote the following query Select * from tableA A Inner Join tableB B on A.ClaimNumber = B.ClaimNumber and A.Amount = B.Amount This query works perfectly fine and gives me only matching records, however if i want to have records which match with ClaimNumber and not with Amount i wrote something like this
Select * from tableA A Inner Join tableB B on A.ClaimNumber = B.ClaimNumber and A.Amount <> B.Amount.
And this query produces wrong results, its giving me match and also non match records.
how to write a query for my non match condition?
View 5 Replies
View Related
Oct 1, 2007
Looking to see if thier is a better way to find the last record entered in a group of records.
What I'm doing now is finding the max for the secound column and then doing a sub query to find the max of the third column having the second columns equal.
Table example using simplied data.
PolId
CoveragId
EffDate
Status
Limit1
2
1
9/7/2007
a
10000
2
2
9/7/2007
a
150000
2
2
10/1/2007
a
200000
3
1
9/7/2007
a
10000
The parent program addes a row every time the data is changed. To make things worst; the records arn't always in sqenal order like the above table and some time edits the row instead.
The current query returns a single value. from a single table.
Current code used in the select protion on a larger query. bpi = basicpolicyInformation.
( Select c1.limit1
From AFW_Coverage as c1
Where c1.PolId=bpi.PolId
and c1.CoverageId = (select max(CoverageId) as CoverageId
From AFW_Coverage as c
where c.PolId = c1.PolId
and c.CoverageCode = 'Dwelling'
and status <> 'D'
)
and c1.effDate = (select max(Effdate) as Effdate
From AFW_Coverage as c
where c.PolId = c1.PolId
and c.CoverageID = c1.CoverageId
)
Explain the current code. It uses the two sub queries to find the correct record ID that has the data needed.
View 16 Replies
View Related
Oct 13, 2012
Table :
ChangeID ChangeDate EquipmentID ModuleID EquipStatus
1 12/9/08 230 1789 Normal
2 13/9/08 450 1245 Normal
3 17/9/08 230 1789 Open
4 21/9/08 230 1899 Open
5 21/9/08 450 1674 Normal
6 22/9/08 450 2364 Normal
Given a date, what module was each equipment item in on that date?How do I get the date of the nearest previous event from a list like this? I got a query from one of the post in this Forum only using Cross Apply to find the nearest record from the above table based on Date i.e.
SELECT outerT.*
FROM your_table AS outerT
CROSS APPLY
(
SELECT TOP 1
equipment_id
, change_date
FROM your_table AS innerT
WHERE innerT.change_date <= @point_in_time
AND innerT.equipment_id = outerT.equipment_id
ORDER BY change_date DESC
) AS applicable_records
WHERE applicable_records.change_date = outerT.change_date
The problem is I need to get this query without using Cross Apply as i need to use the same for the LINQ which doesn't support Cross Apply.
View 1 Replies
View Related
Mar 3, 2015
I have the following tables:
--acts as a transaction table
CREATE TABLE #TestData (
id int not null identity(1,1) primary key,
account varchar(10) not null,
deposit int not null
[Code] ....
--desired results
-- within each account group, when a individual record causes the groups running total to exceed the group's budget, show the difference that causes the groups running total to exceed the budget as unbudgeted. The amount of that transaction upto the budget amount show as renewal. For any succeeding individual records in the group, the amount of that transaction is Unbudgeted.
Here's the SQL I have thus far...
SELECT a.id
,a.account
,a.deposit
,a.total
,a.budget
,case when a.total <= a.budget
[Code] ....
View 4 Replies
View Related
Jul 15, 2015
I seem to be able to see where a procedure is being recompiled, but not the actual statement that was executing the procedure.
Note, with 2008 there is a DMV called dm_exec_procedure_stats , which is not present in 2005
USE YourDb;
SELECT qt.[text] AS [SP Name],
qs.last_execution_time,
qs.execution_count AS [Execution Count]
FROM sys.dm_exec_query_stats AS qs
CROSS APPLY sys.dm_exec_sql_text(qs.sql_handle) AS qt
WHERE qt.dbid = DB_ID()
AND objectid = OBJECT_ID('YourProc')
The above shows results that include the CREATE PROCEDURE statements for the procedure in question, but this only indicates that the procedure was being recompiled, not necessarily that it was being executed?
View 3 Replies
View Related
