I have a table with the following variables:
patid cddate nadcd4
Patients (patid) have multiple records. I am trying to find the lowest nadcd4 for each patient along with the associated cddate. I can do a min(nadcd4) and find the lowest nadcd4 by patid but I can't seem to get the associated cddate. Any suggestions? Thanks
wal
Hi,
I have a sql query which gives me the result set with lots of columns and rows.
a b c allocated unallocated
- ------ 75458702 0484095809
------- 534534 8743857
------- 953459034 90584395
i have to find of which is the smallest number in both allocated and unallocated columns -
here in this case
it would be 534534.
how do i do this ?
Thanks
I created a CTE which finds a subset of records from a table
I then ran a SELECT statement against the same table as
SELECT * FROM TABLE
EXCEPT (SELECT * FROM CTE)
Is it possible to add another EXCEPT statement after the CTE EXCEPT statement to cover a condition not incorporated in the CTE definition?
I'm looking for a way of taking a query which returns a set of date time fields (probable maximum of 20 rows) and looping through each value to see if it exists in a separate table.
E.g.
Query 1
Select ID, Person, ProposedEvent, DayField, TimeField
from MyOptions
where person = 'me'
Table
Select Person, ExistingEvent, DayField, TimeField
from MyTimetable
where person ='me'
Loop through Query 1 and if it finds ANY matching Dayfield AND Timefield in Query/Table 2, return the ProposedEvent (just as a message, the loop could stop there), if no match a message saying all is fine can proceed to process form blah blah.
I'm essentially wanting somebody to select a bunch of events in a form, query 1 then finds all the days and times those events happen and check that none of them exist in the MyTimetable table.
writing the query for the following, I need to collapse the continuity. If the termdate for an ID is one day less than the effdate of the next id (for the same ID) i need to collapse the records. See below example .....how should i write the query which will give me the desired output. i.e., get min(effdate) and max(termdate) if termdate is one day less than the effdate of next record.
ID effdate termdate
556868 1999-01-01 1999-06-30
556868 1999-07-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-01-31
556872 2004-02-01 2004-02-29
output should be ......
ID effdate termdate
556868 1999-01-01 1999-10-31
556869 2002-10-01 2004-01-31
556872 1999-02-01 2000-08-31
556872 2000-11-01 2004-02-29
Hi, I have had this problem for a while and have not been able solve it.
What im looking at doing is looping thru my patient table and trying to organise the patients in to there admission sequence, so when patient "A" comes in and is treated at my hospital and is discharged and admitted to another Hospital within one day then patient "A" will get a code of 1 being there first admission.
then if patient "A" is admitted again but there admission date is greater than one day they get a code of 2 being for there second admission but will need to loop thru table looking for other admissions and discharges.
The table name is Adm_disc_Match_tbl
Basically what i have 4 fields.
Index_key = which is the patient common link (text)
ur_episode = this wil change for each Hospital (text)
Admission_datetime = patient admission date and time (datetime)
Discharge_datetime = patient discharge date and time (datetime)
example of data
Code: ( text )
Index_key,ur_episode,Admission_datetime,discharge_ datetime
HERBERT-7/1929,513884-1686900,4/07/2006 10:58,17/07/2006 13:37
HERBERT-7/1929,C023092-1698859,17/07/2006 13:20,24/07/2006 0:30
ELSIE-5/1916,G148445-1720874,8/08/2006 11:00,30/08/2006 10:00
STANISLAWA-3/1918 ,G119981-1720045,8/08/2006 13:01,22/08/2006 12:13
FREDA-11/1925,183772-1998910,27/03/2007 9:53,3/04/2007 11:06
FREDA-11/1925,G147858-2007408,3/04/2007 10:49,26/04/2007 12:39
FREDA-11/1925,183772-2037727,28/04/2007 17:05,9/05/2007 11:41
FREDA-11/1925,G147858-2052082,9/05/2007 12:00,25/05/2007 11:17
If anyone could help it would be much appreciated.
I have met up a problem. How to i get the second smallest value instead of the smallest value in a table using min(). Any other function rather than min()?
View 11 Replies View RelatedHere is my requirement, How to handle using SSIS.
My flatfile will have multiple columns like :
IDÂ key1Â key2Â key3Â key 4
I have SP which accept 3 parameters ID, Key, Date
NOTE: Key is the coulm name from the Excel. So my sp call look like
sp_insert ID, Key1, date
sp_insert ID, Key2,date
sp_insert ID, Key3,date
Hey
Its easy to get the MAX or MIN from a table,
but what if you want to get the 2nd largest ? or 2nd smallest ?
Is there any way to use a font size smaller than 8pt? Believe it or not... I need to go down to a 6pt font for a report.
Thanks!
Leif
saw my AS400 has this time stamp: 2007-05-02-11.29.56.811195
is SQL2005 able to have time stamp to this details?
i have table in sql and every month i am appending new data in this table, but i want to sort data Culumn Name "account_no' from smallest to largest, and whenever i append new data to this table it auto sort every time,
View 1 Replies View Related
Hi
Please help! I'm really stuck. I have a table (AssessorAllocations) that stores the data of students who have submitted assessments for marking by an Assessor. Each time an assessment is submitted by a student my program must determine which Assessor has the smallest workload and then assign the current assessment to that Assessor. My problem is how do I determine which Assessor has the smallest number of assessments assigned to him/her.
The table columns are:
AssessorRegistrationNo
LearnerRegistrationNo
QualficationName
SubjectName
AssessmentName
DateAssigned
Marked
DateMarked
Price
So I'm looking for something like this:
Select AssessorRegistrationNo from AssessorAllocations where {Select the Assessor who has the smallest number of AssessmentNames assigned to him/her where Marked='0' and DateAssigned<>''}
Thanks
Neil
Hey all,I am having some serious trouble getting the correct syntax for a select statement to work the way I need it, any help I could get on this would be greatly appreciated.I have a table called Units which stores computers and a table called Software which stores software. I have a bit field in Units called OEM, when this is set to true I don't want the select statement to pull this unit down when I am assigning software to other units.Here is my select statement: SELECT Software.SID, Software.SN, Software.Name, Users.First + ' ' + Users.Last AS 'Assigned User', Units.Make + '-' + Units.Model AS 'Assigned Unit' FROM dbo.Software LEFT JOIN dbo.Units ON Software.SN = Units.SN LEFT JOIN dbo.Users ON Units.UID = Users.UID WHERE (Units.OEM = 'FALSE') AND (Software.SN LIKE '%' + @SearchString + '%')Everything works as expected, unless of course the unit has no software assigned to it yet, it won't return it because its not tied to a Units.OEM field. Is there anyway to have it return ALL records that even arn't joined OR are joined but have OEM set to false?Thanks, let me know if I need to clear anything up.-Matthew
View 2 Replies View Relatedi want to select all the user tables within the database and then all the records with in each table.
plz tell me one query to do this.
ex: suppose x and y are user tables and x contain 10 records and y contains 20 records . i want a query which displays all 30 records together.
What is the simplist/correct way to delete multiple records from multiple tables. Any help appreciated. Thanks! (Yes, I'm totally new to this.)
delete dbo.tblcase
where dbo.tblcase.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseclient
where dbo.tblcaseclient.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseinformation
where dbo.tblcaseinformation.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaselawyer
where dbo.tblcaselawyer.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
delete dbo.tblcaseprosecutor
where dbo.tblcaseprosecutor.case_id in ('299760', '299757', '299739', '299732', '299902',
'299901', '299897', '299894', '299873', '299872', '299870', '299865', '299860',
'299858', '299854', '299846', '299838', '299834', '299821', '299813', '299803')
Hi all,
Anybody would tell me how can I find last 10 records in a table using T-SQL?
Thank you very much!
Lee
Hello,
Having trouble describing my problem……
I have the table below, and I am trying to retrieve TileIDs that have the same ModelIDs.
ModelID TileID
HP DL380 G3 120v Dual15400
HP DL380 G3 120v Dual15400
HP DL380 G3 120v Dual15400
HP DL380 G3 120v Dual15400
HP DL380 G3 120v Dual15400
HP DL380 G3 120v Dual15400
Sun SF 280R 120v 15401
Sun SF 280R 120v 15401
Sun SF 280R 120v 15401
Sun SF 280R 120v 15401
Lantronix MSS4 15401
So TileID ‘15400’ would be a keeper, since all ModelIDs are the same.
Any help would be appreciated.
Thanks
Hello friends,
plza help meeeeeeee
tbl_user Data
user Updatedate
Bill 08/02/2006
Bill 08/02/2008
Peter 11/02/2008
Liz 01/02/2008
sam 01/02/2007
select * from
where Updatedate < getdate()-30 days and (not in Updatedate > getdate())
i want to get all records
output i am looking....
user Updatedate
Liz 01/02/2008
sam 01/02/2007
Hi All, I am trying to find records when searchProductCount = 2 AND when searchProductCount < 2 BUT productID not in (select pid from TableB) ... I have the query below ... but is there any other better way to do this?
TableB has IDs: 100, 700 ...etc
eg: searchProduct ID is 50,100
-- means returns everything when we found ALL productID (50,100) from TableA, count =2
Select productName, productID from TableA where searchProductCount = 2 AND productID IN (50,100)
union all
-- when not all productID found in TableA, we only return productsID from TableA which ID found in TableB, count < 2
Select productName, productID from TableA where searchProductCount < 2 and productID IN (select pid from TableB) -- in this case, pid found in TableB from searchProductID will be 100
------------------------------------------------------------------
it comes out there are duplicates results (when first query is valid, we union all second query, so we have duplicates records). How can we eliminate the duplicates? Or is there better way to acheive this without using union all?
Hi,
Does anybody know the SQL query to find the duplicate records?
Many Thanks in advance!
Hello board,
I was wondering if anyone can tell me an easy way to find duplicate records on sql. The thing is this, at work we have a database (table) which includes tracking numbers, I need a easy way to be able to search this table for duplicate tracking numbers and print them out. I currently access this table to edit some data by using the following path “Start > Programs > Microsoft SQL Server > Enterprise Manager” then work my down the tree to “Databases > Master > Tables” on tables I do a right click and “open table/query”. Any help would be most appreciated. Believe me I’m very “SQL illiterate”
Bill
:confused:
Hi,
As far as I know in SQL Server 6.5 there is no concept called rowid. How can I find duplicate records in a table and delete them.
Thanks,
Srini
I have this query that I have been using to find duplicate records works great except for now. The logic I am adding is pcs_rreas <> 'NG'. When I add this it does take out the NG, but it also excludes the reocords that have NULL data in this field. I don't want that to happen. How can I fix this? I tried adding (pcs_rreas <> 'NG' or pcs_rreas is null) but nothing is pulling now.
SELECT pcs_id1, pcs_rreas, pcs_lname, pcs_fname, pcs_minit, pcs_degree, pcs_xtyp, pcs_office, pcs_dba, pcs_dob, pcs_sex, pcs_eff, pcs_trm, pcs_spec1, pcs_spec2, pcs_spec3,
pcs_spec4, pcs_tax1, pcs_ssn, pcs_altid, pcs_upin, pcs_medic, pcs_mcaid, pcs_ecs, pcs_npi, pcs_status, pcs_dir, pcs_den, pcs_www, pcs_hold, pcs_email,
pcs_misc1, pcs_misc2, pcs_newdt, pcs_newby, pcs_chgdt, pcs_chgby, pcs_malp, pcs_pf, pcs_ctl, pcs_sys, pcs_pay, pcs_ann, pcs_bcert, pcs_pass, pcs_w9,
pcs_taxex, pcs_tax2, pcs_type, pcs_rreas, pcs_routo, pcs_rtime, pcs_rdate, pcs_force, pcs_flag, pcs_v419, pcs_bcity, pcs_bstate,
[code]...
Hi all,
I have a question regarding SQL Server Performance and would be grateful for a tip. Let's say I have a DB with 50.000 records. These records belong to 1.000 different datasets, so there is 1 actual and 49 historical data records. For example a company with 1000 employees has a database where each year a new record is created for each employee so after 50 years they have 50.000 records (50 years x 1000 employees). 1 record is actual, and 49 are historical. What is the best way to store this? Main target is performance for the enduser, so when an employee clicks "See all my records" it should be fast. But on the other hand the application mainly works only with the current year. Additionally it should also be fast for the boss of business unit who wants to see the latest records of his e.g. 100 employees. I have some ideas and would like to get your opinion:
1. Retrieve by latest date
Just store the records. To get the current year just select the record with the latest year. Disadvantage might be with larger databases: If the company switches to store the requests per month, each user would have 600 records (12 months x 50 years). Each time the latest record should be retrieved, 600 recards have to be compared regarding the latest date (or sorted by date descending using Top1, but this might be a problem for the boss then? Or could this be combined for a group if the boss wants to see all the latest records of his employees?).
2. Add a 'IsCurrent'-Flag
Each time a new record is stored it should be compared to the latest record. If it is newer, the 'IsCurrent'-Flag should be removed and then checked on the new record. This should be fast processed (because on saving a new record it only needs to be checked against the currently 'IsCurrent'-flagged record), and for retrieving the current record no further comparison is necessary. But how could I do this? I need to update the "AddRecord"-SP with this comparison, but I don't know how to do this.
Currently number 2 is my favorite, I just don't know how to do it ;-) What is your opinion about it, and could you include an example?
Thanks
Hello,
I would like to find all the records that contain only digits. So far, I have this:
SELECT *
FROM tmp1
WHERE (word LIKE N'[0-9]')
It returns only ten results, each containing a single digit. What I need is to find all the records of any length containing only digits, like '378', '2005', etc. but not records containing both digits and other stuff (e.g. letters) like 'I95' or 'P2P'.
Any idea?
Cornelius
Version: Microsoft SQL Server 2000 - 8.00.2040 (Intel X86)
Problem:
Server: Msg 8964, Level 16, State 1, Line 1
Table error: Object ID 515532920. The text, ntext, or image node at page (1:377289), slot 1, text ID 897099563008 is not referenced.
Server: Msg 8964, Level 16, State 1, Line 1
Table error: Object ID 515532920. The text, ntext, or image node at page (1:377447), slot 1, text ID 897100939264 is not referenced.
<... and 4 same errors>
DBCC results for 'CC_Document'.
The repair level on the DBCC statement caused this repair to be bypassed.
<same messages>
The repair level on the DBCC statement caused this repair to be bypassed.
There are 192 rows in 6 pages for object 'CC_Document'.
CHECKTABLE found 0 allocation errors and 8 consistency errors in table 'CC_Document' (object ID 515532920).
repair_allow_data_loss is the minimum repair level for the errors found by DBCC CHECKTABLE (crmproded.dbo.CC_Document repair_fast).
I won't run checktable with 'repair_allow_data_loss' before all records aren't find out
I try run DBCC PAGE on this pages. It print info
PAGE: (1:377289)
----------------
BUFFER:
-------
BUF @0x01249540
---------------
bpage = 0x2928A000 bhash = 0x00000000 bpageno = (1:377289)
bdbid = 8 breferences = 0 bstat = 0x9
bspin = 0 bnext = 0x00000000
PAGE HEADER:
------------
Page @0x2928A000
----------------
m_pageId = (1:377289) m_headerVersion = 1 m_type = 3
m_typeFlagBits = 0x0 m_level = 0 m_flagBits = 0x8000
m_objId = 515532920 m_indexId = 255 m_prevPage = (0:0)
m_nextPage = (0:0) pminlen = 0 m_slotCnt = 2
m_freeCnt = 3742 m_freeData = 4446 m_reservedCnt = 0
m_lsn = (19116:290571:12) m_xactReserved = 0 m_xdesId = (0:0)
m_ghostRecCnt = 0 m_tornBits = 856438469
Allocation Status
-----------------
GAM (1:2) = ALLOCATED SGAM (1:3) = NOT ALLOCATED
PFS (1:372048) = 0x42 ALLOCATED 80_PCT_FULL DIFF (1:6) = NOT CHANGED
ML (1:7) = NOT MIN_LOGGED
Blob fragment at: Page (1:377289) Slot 0 Length: 4266 Type: 3 (DATA)
Blob Id:897099563008
2928A06E: 7fe8108f 64a115ed 245a1a1a b68e502c .......d..Z$,P..
<blob fragment ... >
2928B0FE: 00006278 00006e87 00007ad1 xb...n...z..
Blob fragment at: Page (1:377289) Slot 1 Length: 84 Type: 4 (LARGE_ROOT_2)
Blob Id: 897099563008 Level: 0 MaxLinks: 5 CurLinks: 5
Child fragment at Page (1:377237) Slot 0 Offset: 8080
Child fragment at Page (1:377238) Slot 0 Offset: 16160
Child fragment at Page (1:377239) Slot 0 Offset: 24240
Child fragment at Page (1:377288) Slot 0 Offset: 32320
Child fragment at Page (1:377289) Slot 0 Offset: 36572
There are 5 links at Slot 1 , that's generate error. But why? What does it mean - "The text, ntext, or image node at page (1:377289), slot 1, text ID 897099563008 is not referenced" ???
I saw other pages (not 'broken') - there is: Blob Fragment don't contains links - links are in other pages.
What are these 'broken' records in my example - they are chunks of lost information, that i can't recover?
Or not? May be exists a way, that i find all 'broken' records? Because, my table contains 192 records. But there is BLOB field - and i can't check consistency of every file, that uploaded in my table. In addition I will fully appreciate this problem.
At last, if i find record, i run checktable with repair_allow_data_loss, then upload file again.
p.s. These errors contained in backup too.
Hello friends,
I have a one problem, i have a table in that some reocrds are duplicate.i want to find which records are duplicate.
for exp. my table is as follows
emp_id emp_name
1 aa
2 bb
3 cc
1 aa
3 cc
3 cc
and i want the result is like
emp_id emp_name
1 aa
1 aa
3 cc
3 cc
3 cc
On a webform, I have three button ... [7 days] [15 days] [30 days]When the user clicks one of the buttons, I want to return their orders for the past X days. The WHERE clause would include something like this (for 7 days):WHERE (Order_Date BETWEEN CONVERT(DATETIME, GETDATE() - 7, 102) AND CONVERT(DATETIME, GETDATE(), 102))How do I parameterize the number of days?Thanks,Tim
View 2 Replies View RelatedI want to be able to use a query to display all the records in the 6.5 database that have no data in the STATUS field. This is the query I thought would work....."SELECT * from travel_date WHERE status="''"
But, that is not working. Can someone please help me figure out the right way to wrtie this?
I appreciate your help!
I need to be able to find certain data as the user has submitted that data twice and delete one record,except that have hundreds of tables and don't know the table where she would have submitted the data, but I have some other key info that I can start with.
My question is,how do i select a record from the database if I don't know the table it comes from?
Could somebody give me an expamle please?
I have a DateTime field, I need to find out how many records are in 8am-11am, 12pm-5pm, 6pm-7am regardless of date. How can I do this?
Kamran Shahid
Sr. Software Engineer(MCSD.Net)
www.netprosys.com