I have a start_datetime column and an end_datetime column that records when a process we run starts and stops. I am trying to write a query that can calculate the difference between the start time and the end time and display it as hh:mm:ss but cannot seem to come up with a solution. Any ideas?
View 2 RepliesHi
I always seem to come back to dataset issues. Nonetheless, here is my problem:
I am retrieving data using a stored procedure that lists the number of bookings per hour and the revenue that generates also per hour. So, you enter a single date in the stored procedure, for example 2001-10-01 and it will bring back 24 rows corresponding to the 24 hours (obviously) and two columns, one displaying the number of bookings and one displaying how much revenue.
Pretty simple so far.
I have a report using SQL Reporting Services that allows users to enter two dates and therefore you get two tables with the relevant dates data. For example, table one has date 1's data and table 2 has as you'd expect date 2's data. Both tables use different datasets.
The reason why I am using different tables and different datasets is that the stored procedure I use only allows the use of one date at a time therefore, I use a second dataset to generate the second date's data.
The problem occurs when I want to calculate a difference between the two date's data, for example have another table that shows the differrence between table one and table two for bookings for each corresponding hour.
Anyone have any ideas as to how I could achieve this?
I have two columns in my table. Both the columns contains datetime datatypes. I need to write a stored procedure which will calculate the date difference between the two columns and if it exceeds more than 5 days then that record should get deleted. How to do it?Thanx
View 2 Replies View RelatedI want to create a View, which contains columns from two tables, and an additional column, which should calculate the difference between two dates.01/05/2005 7:30 AM - 01/05/2005 8:00 AMThe column should be a calculated column,Can I assign the value of a column to a user defined function?In the UDF, how to get the difference between those two dates to be: "00:30"Are there SQL Server functions to time and date that allows me to do so? I have dateadd, datediff, but I am unable to figure out the 2 problems above.thank you,
View 10 Replies View RelatedIn my table i have two cols and datatype datetime, for example they has the values,--------StartDate --------------------------------------- StopDate ------______________________________________________01/05/2005 7:30 AM ------------------------ 03/05/2005 10:00 AM13/05/2005 2:30 PM ------------------------- 01/08/2005 8:00 PM_____________________________________________How do I find out the avg time difference between StopDate and StartDate? I tried AVG(StopDate - StartDate ), but it's giving me the following error message. "The average aggregate operation cannot take a smalldatetime data type as an argument."Thanks for any reply.
View 1 Replies View RelatedFinding Time Zone:
Hi,
1. I have a patient record created in the database with a CreateDate
2. I need to find the time zone based on a state or city or zip in the record
3. And find corresponding EST time of CreateDate
Is this possible?
I have the following staement :
AVG( CASE WHEN EventTypeName=''EventA'' THEN CAST(DateDiff(s,EntryTime,EventDateTime) as float) END ) as Duration1
but the problem here is that i need to find the difference between two EventTypes EventA and EventB NOT EntryTime and EventDateTime of EventA
so how can i re-do the above query to get:
EventA - EventB
Not
EntryTime - EventA
NOTE: EventDateTiem is the time that the EventA occurred.
thanks
robby
advance thanks to all...can anybody helpme soon...........
i am using sql server 2005........i want to find out time difference between two dates in HH,MM,SS format
eg i want the time difference of these two dates
02/Nov/06 9:14:21 AM
19/Apr/07 11:52:31 AM
now i am using this calculation in my procedure is as follows...but i think this is wrong...if we will seperatly calculate like this wrong i am getting
set @totaltravelHr=datediff(HH,@datediff1,@datediff2)
set @totaltravelMI=datediff(MI,@datediff1,@datediff2)
set @totaltravelSE=datediff(SS,@datediff1,@datediff2)
I have a table containing following Columns plus other columns:
Start Date 04-01-2002(mm-dd-yyyy) varchar(10)
Start Time column 09:30:30(hh:mm:ss) varchar(8)
End Date 04-05-2002(mm-dd-yyyy) varchar(10)
End Time column 09:45:30(hh:mm:ss) varchar(8)
1]We want to create a view for Report Users So that they could just select
the other columns and difference in start Date/time to End Date /Time.
2]The Difference in time should be based on Business Day. i.e.
Saturday & Sunday should be excluded. &
3]Each business day is defined as 8.00 am to 5 .00pm
( 1 Business day = 9 hrs)
4]The time is stored as 24 hour clock.
For e.g.
Start Date Start TimeEnd Date End Time Desired Output
04/01/2002 10:00:0004/01/2002 3:30:00 0 Days 5:30 Hrs
04/01/2002 16:00:0004/02/2002 10:45:00 0 Days 3:45 Hrs
04/01/2002 09:00:0004/03/2002 10:45:00 2 Days 1:45 Hrs
04/05/2002 16:30:0004/08/2002 9:45:00 0 Days 2:15 Hrs******
******In last case as 04/06/2002 & 04/07/2002 were Saturday & Sunday ,hence
excluded.So the difference of time is just 2:15 hrs
Can you please give me a suggestion/pseudo code/logic on how I might do this?
We cannot use cursors as we want to make a view.This is for SQL Server 2000
hi to all,
very urgent query
how to minus the two times(hh:mm:ss)in sql server
regards
ammu
Table
DateField--------------CNT-1 CNT-2 CNT-3
2013-12-09 09:00:00.000 8 1 2
2013-12-09 09:01:00.000 3 7 1
2013-12-09 09:02:00.000 1 2 3
2013-12-09 09:03:00.000 2 5 2
2013-12-09 09:04:00.000 1 1 7
2013-12-09 09:05:00.000 2 3 2
My requirement is to get the output in the following format if i take the time with 2 minutes difference
DateField ------------------ Sum-CNT-1 Sum-CNT-2 Sum-CNT-3
09:00:00.000 - 09:02:00.000 12 10 6
09:02:00.000 - 09:04:00.000 3 6 9
Is there anyway i can write down a query to get the sum of the counter with 2 minutes difference. I may take time slot between 9 AM to 10 AM so i should get the sum of the counter with 2 minutes gap in a single query.
I am new to SQL Server and am trying to write a query that subtracts the time difference in the same column. I need to know the time difference between BatchSequence 2, LoadSequence 1 and BatchSequence 13, LoadSequence 3. Below is an example of the data. Thanks in advacne for the help!
BatchSequenceLoadSequenceScanLabelProcessDate
13 1Part Number11/1/2007 6:08:02 AM
13 2Scan Trace11/1/2007 6:08:03 AM
13 3Slot Position11/1/2007 6:08:04 AM
2 1Part Number11/1/2007 5:53:06 AM
2 2Scan Trace11/1/2007 5:53:07 AM
2 3Slot Position11/1/2007 5:53:08 AM
Hi,I have a table called Bookings which has two important columns;Booking_Start_Time and Booking_End_Time. These columns are both of typeDATETIME. Given any day how can I calculate how many hours are availablebetween the hours of 09.00 and 17.30 so a user can see at a glance how manyhours they have unbooked on a particular day (i.e. 8.5 hours less the timeof any bookings on that day), can this be done with a queryor do I have to work it out in my code?Thanks for your help
View 2 Replies View RelatedMy table has two datetime columns (TheatreArivalDate and TheatreDepartDate). Can I get an average value of the time differences of them? Thanks
View 1 Replies View RelatedHi Friends,
Is there any way to find the time when the last DDL was happened in a table?
For example: The time when the new column(s) were added into a table or changed the datatype.
Thanks for the help in advance.
--Raj
I have a table that contains the following
UserName - Which is unique to each user
TimeStart - Which is the time and date that the user logs in
TimeEnd - Which is the time and date that the user logs out
Using SQL, how do you find who has logged in using the same account within the same time period. In other words, Two people are using the same username and are logged in at the same time.
What is the easiest way to write a query statemet to find two or more instances that occur in a 15 minute period? Any help would be greatly appreciated. Thanks.
View 6 Replies View RelatedI have data in which i need to calculate employees working hours for a day...
name time in_out
manisha 2011-01-01 9:30:00.000am 1
manisha 2011-01-01 10:30:00.000 0
manisha 2011-01-01 10:45:00.000 1
manisha 2011-01-02 1:00:00.000am 0
How can i calculate time in that two dates as 1 is for entry an 0 is for exit..
Is it possible to send a sql statement to update column 1 where the current time is 10 mins older than the time in col 2.
Column 1 is holding a true statement that we need to update to false if over 10 mins old...
It has been a while since I have used SQL server and require to show a time difference between a start and end time, with only 1 date to determine these times
SQL
select
Arrival_date
locationdate as LocDate,
locationid as Loc_ID,
locations.loc_name as Location_Name
from current_locations
left outer join locations on
locations.loc_id = current_locations.location_id
where current_locations.Attend_ID = '1234567'
Results
Arrival Date LocDate Loc_IDloc_name
26/02/2013 19:2126/02/2013 19:271270Queue
26/02/2013 19:2126/02/2013 19:341278Dept 1
26/02/2013 19:2126/02/2013 21:10222Dept 2
26/02/2013 19:2127/02/2013 02:5631Left Department
What I want to acheive is the following where the Start location date is either the arrival date or the next location date and the endLocDate is the next finish date.
StartLocDateEndLocDateTime DifferenceDept
26/02/2013 19:2126/02/2013 19:2700/01/1900 00:06Queue
26/02/2013 19:2726/02/2013 19:3400/01/1900 00:07Dept 1
26/02/2013 19:3427/02/2013 02:5600/01/1900 07:22Dept 2
Hi Guys,
I want to group the records on the time difference
declare @tbl as table(id int,intid int,val int,dt datetime)
insert into @tbl
select 1,1,10,'03/31/2006 15:05:22' union all
select 2,1,12,'03/31/2006 15:10:22' union all
select 3,1,15,'03/31/2006 15:15:22' union all
select 4,1,12,'03/31/2006 15:25:22' union all
select 5,1,8,'03/31/2006 15:30:22' union all
select 6,1,6,'03/31/2006 15:35:22' union all
select 7,1,4,'03/31/2006 15:40:22' union all
select 8,1,3,'03/31/2006 15:45:22' union all
select 9,1,10,'03/31/2006 15:50:22'
declare @tbl1 as table(intid int,Tm int,val int)
insert into @tbl1
select 1,5,10
I want a output such that when the val in @tbl goes below the val in @tbl1 for the Tm mentioned in @tbl1
then the time difference should be shown.For example record 1 it starts with 10 the records remain more than 10 till
record number 5.From 5 the records remains lower than 10 till record number 9.So I need to show the the time
difference from record number 5 till 9.
But there is a catch.In @tbl1 there is column named Tm.The time difference sould be calculated only if the diff
more than Tm value in @tbl1.
For example if the value of Tm is changed to say 25 then the there is no need to show the time difference since the
time difference value from record 5 to record 9 is less than 25.
Hope I am clear.
Please help me out.
Regards
I receive the following result set from TableA (In Time)
7/9/2013 9:27:00.000 AM
7/9/2013 10:24:00.000 AM
7/9/2013 11:25:00.000 AM
7/9/2013 1:23:00.000 PM
7/10/2013 7:27:00.000 AM
Then we receive the following result from TableB (Out Time)
7/9/2013 9:30:00.000 AM
7/9/2013 10:29:00.000 AM
7/9/2013 1:37:00.000 PM
[NULL]
[NULL]
We may not always get Out Times in TableB so I want to merge these into one table to have the In Time and Out Time in separate columns in that one table. In this example with the red type those should be In Time and Out Time for mapped unique identifiers from each table and yet the purple color coded example would have an In Time of 11:25 AM and the Out Time would remain as NULL.
I am using this block of code but is not working the way I want it to because the 11:25am In Time is getting mapped to the 1:37pm Out Time.
and out_time = (select min (out_time)
FROM tableB WHERE
tableB.record# = tableA.record#
and tableB.loc_id = tableA.loc_id
GROUP BY tableB.record#, tableB.loc_id )
It seems I need to focus on the minimum datediff for each record line but can't figure that part out.
i am using this expression to get the time difference between two times.
{%Z.elapsed.time(@AK.VD.depart.date,@AK.VD.depart.time,@AK.VD.depart.date,@DV.VD.arrival.time,"hh.hh")*60} as [LOS (min)]
When Arrival time and depart time both are on same day above expression working to get the diference .
But if arrival date 2013-09-20 00:00:00.000 and arrival time 0800 and depart date 2013-09-21 00:00:00.000 and depart time 0050 when i calculate the time difference(using above expression) between these two i am getting -429.60 which is wrong. i have to get around 990.
I have a data set like so:UTC_TIME Timestamp NodeID Message FlagLineStation11/19/2005 10:45:07 1132397107.91 1 3 5 1028103411/3/2005 21:05:35 1131051935.20 2 3 5 1009104311/25/2005 21:12:16 1132953136.59 3 3 5 10371049I added the UTC_TIME column in as aconversion of the unix timestamp inthe TIMESTAMP column.Keeping things simple and straightforward, I need to be able tocalculate the difference from one record to the next (ordered byTIMESTAMP or UTC_TIME) and output the result into another column in thetable.NODEID is the unique id.First, what is the function to do so if, say, I only wanted tocalculate the difference between 2 records as just a basic SELECTstatement. That way I can answer quick question based on any one or twoNODEID's.Second, how would I further that to continually calculate (as statedabove)?WOuld this be a stored procedure? A trigger? A cursor?I am learning as I go here. Any help is greatly appreciated.R.
View 4 Replies View RelatedI am using SQL 2000 and/or SQL 2005 to link to an Oracle Db usingOPENQUERY.The SQL 2000 box is SP4 on Win2000.I can run a query thru Q.A. for SQL 2000 or I can run an Oracle querythru SQL-Plus to see the data. But, if I run a date-query using thelinked server then SQL Server returns a TIME that is off by 4 hours.SQL Query:SELECT * FROM OPENQUERY( ORASERVER, 'SELECT MYDATE FROM MYTABLE')Oracle Query:'SELECT MYDATE FROM MYTABLE'Oracle results:04/16/2006 01:07:00SQL 2000 result:04/16/2006 05:07:00Has anyone seen this before? Is there a fix?I have searched the newsgroups and MS Kb but can not find an answer.Thanks,Marty
View 1 Replies View RelatedI have a SP SPone. i have optimized that and kept it as SPone_Optimized. i would like to test the both SP's execution time to find out how best the optimized one fares.
i planned to test it as follows
declare @starttime datetime,@endtime datetime
declare @count int=0
select @starttime=getdate()
while(@i<10000)
begin
execute SPone_optimized @param='value1'
end
select @endtime=getdate()
select datediff(ms,@stattime,@endtime) 'total_exec_time'
----- for the SP that is before optimize
declare @starttime datetime,@endtime datetime
declare @count int=0
select @starttime=getdate()
while(@i<10000)
begin
execute SPone @param='value1'
end
select @endtime=getdate()
select datediff(ms,@stattime,@endtime) 'total_exec_time'
Hi guys,This might be simplest thing, but I am newbie to databases.I need to find out only rows modified within certain time period from adatabase. As I undertand a way out could be adding an where clause forthe time period might be an option, I might be wrong here again.But, wanted to know is there any other option. Can triggers or anyother things help me in this matter.Regards,Abhijeet
View 1 Replies View RelatedI am setting up a monitor to alert me if an SQL job has failed in the "last 20 minutes". This should run 24 hours a day, 7 days a week. My query looks something like this.
select * from TALMAIN.msdb.dbo.sysjobhistory where job_id = '7139D5D1-CD88-46E8-8324-5D5A0D8D3A27' and run_status <> 1 and
DATEPART(YYYY,GETDATE()) = substring(convert(char(8),run_date),1,4)and
DATEPART(MM,GETDATE()) = substring(convert(char(8),run_date),5,2) and
DATEPART(DD,GETDATE()) = substring(convert(char(8),run_date),7,2)and DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)) <= 20.
The run_date and run_time columns in msdb..sysjobhistory are stored as integers. Tried a couple of things, but I am unable to convert both of them to datetime data type. The last conditions in the above logic hold true for only "2 digit" hour and minute values.
DATEPART(HH,GETDATE()) = substring(convert(char(8),run_time),1,2)and (DATEPART(MI,GETDATE()) - substring(convert(char(8),run_time),3,2)).
What about time values like 00:05 AM and single digit time values like 1:00 AM and 9:05 AM, for example?. I pasted some sample run_date and run_time values from sysjobhistory below.
run_date run_time
2006122821510 -- 02:15:10 AM (how to get the minute count?)
2006122821510 -- 02:15:10 AM (same as above)
20061227233014 -- 23:30:14 PM (this is strt forward)
20061227233014 -- 23:30:14 PM (same as above)
200612273016 -- 00:30:16 AM (how to get minute count?)
200612273015 -- 00:30:15 AM (how to get minute count?)
Is there a simpler logic to achieve this? Hope I was clear, else let me know. Please advise. Thank you.
Currently my script is using the below mentioned query to find the time difference.
DATEDIFF(HH,DATEADD(SS,hcreacion,fcreacion) ,DATEADD(SS,hcerrar,fcreacion))
If there is 1 hr 30 minutes time difference, I am getting 2 hours as output. But we need 1.30 as output. is there any way to achieve this?
I have the below query
DECLARE @GivenDate DATE='2015-05-13'
create table #table (LedgerID int,AttDate Date, checkedtime time,checkedtype varchar(1))
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','09:01:48.0000000','I')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','13:05:52.0000000','O')
insert into #table (LedgerID,AttDate,checkedtime,checkedtype) values (1232,'2015-05-13','14:10:25.0000000','I')
[code]....
the result is like below
i need 'TotalDiffernceTime' column as new column (OUT1-IN1)+(OUT2-IN2).
i am using SQLServer 2008 R2
I have a table data like below
id type timestamp
1001 start1 10:34:23:545
1001 start2 10:34:24:545
1001 end2 10:34:24:845
1001 end1 10:34:25:545
1002 start1 10:34:25:645
1002 start2 10:34:25:745
1002 end2 10:34:25:945
1002 end1 10:34:25:965
I need the result as follows
id millisecond diff start1end1 millisecond diff start2end2
1001 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
1002 end1 timestamp-start1 timestamp end2 timestamp-start2 timestamp
SQL Server 2008 R2
Could any one please tell me how to find time difference between two dates?
i have two fields in database as datetime data type.i need to get time difference between this two fields.how to do that?
i use this one
SELECT outdate, (datediff(mi, outtime, intime) / 60.0)AS TimeUtilized FROM breaktime
but it giving me results as
1.00000000
1.250000
3.00000
i jus want it to be
1
1.25
3
How to do this?
Thanks for any help.
I have seen in this forum that many people has posted like my query time taken problem. But I couldn't get clear solution for this.
Here is the my issue:-
I have written couple of batch query to bring data from another sql server.
I have used proper index and index hints for these query.
I have used SET NOCOUNT ON in stored procedure.
I am having the time difference for one of the blow qeury in various running process that executed in QA as single query , stored procedure for whole batch query and schedule this stored procedure in job
sotored Proc = 31 second > job =28 second > seperate query = 12 second.
one of 15 batch query
declare @last smalldatetime
set @last ='11/08/2002'
UPDATE ENTERPRISE_STATE
SET RESP_BUYER_FST_NAME = i.first_name,
RESP_BUYER_LST_NAME = i.last_name
FROM oesd.dbo.individual i WITH (NOLOCK index(XPKindividual))
INNER JOIN Leap.dbo.fnIndBuyer(@last) fn
ON fn.individual_num=i.individual_num
WHERE ENTERPRISE_NUM = fn.enterprise_num
Anbody can able to give proper reason why I am getting this time difference.
Thabnks,
Ravi