I have a large query that I am trying to debug in query analyzer.
However, the errors I get have no line number or reference to where
they are failing. How can I find out what line in the query is causing
a particular error message to appear?
Thanks
John Ivey
South Pike School District
i have id, start_date, end_date
View 2 Replies View RelatedI have a problem with a 3rd party piece of software. Doesn't matter which, really. The problem lies
in a table called payments, with a column called txnumber...the newest version of this software fails
a check during installation with the message "duplicate txnumber in payment table." Not sure how
this could have happened, since there is no way to manually assign the txnumber, but the point is
not important. What I'd like to do is figure out a sql script that will return only the duplicate number(s)
so that I can either remove or change them manually. Unfortunately, I'm not terribly familiar with sql.
Any suggestions?
I need to write a SQL to find number of hours between a begin time and end time. The fields are varchar. There are several date functions in sql, but I am not able to figure out how to get the hours between two times that is not in date format.
BEGIN_TIME END_TIME
0900----- 1500
1000----- 1700
1000----- 1230
0930----- 1030
Hi,
How do you generate line numbers in Transact SQL?
Example:
In Sybase, I could use this...
select number(*), customer_name from customer_table
number(*) customer_name
----------------------------------------------------
1 Customer Name 1
2 Customer Name 2
3 Customer Name 3
Thanks,
Geoff
when we get something like this in QA:
Server: Msg 170, Level 15, State 1, Line 3
Line 3: Incorrect syntax near ','.
I only have 3 lines inclusing only one insert. How do I know what value or keyword is wrong from the error message above.
Thanks
Hello.
I have a query That look like that:
"SELECT COUNT(*),MONTH FROM TABLE GROUP BY MONTH"
The result is:
Jun 2
Feb 2
Mar 3
Apr 0
May 5
What I want to have is that every month will sum up the previous month and him self so in the end I will be able the create a graph wuth those numbers:
Jun 2
Feb 4
Mar 7
Apr 7
May 13
Any ideas on how to start?
When you get a server error message referring to a line number in ascript, is there an easy way to jump to the correct line? It's noteasy to count down in a big script or when there is a lot of whitespace.In WordPerfect we had a linenum macro that allowed you to enter theline number and it would jump to the line using the same countingmethod as the interpreter that generated the error message. Is theresomething similar with TSQL, or another way?Kerry
View 2 Replies View RelatedHello.
I have a query That look like that:
"SELECT COUNT(*),MONTH FROM TABLE GROUP BY MONTH"
The result is:
Jun 2
Feb 2
Mar 3
Apr 0
May 5
What I want to have is that every month will sum up the previous month and him self so in the end I will be able the create a graph wuth those numbers:
Jun 2
Feb 4
Mar 7
Apr 7
May 13
Any ideas on how to start?
Hey,
Is there somewhere in MSDE (or SQL) where you can see how many transaction are made to a sertain database or by a sertain user? At this way i could figure out witch database/user uses most (or least) recources (cpu) over a period of time.
I am trying to determine the amount of days in a month to prorate a month end estimate.
We measure service calls and need to approximate how many we will have at month end.
I would like to automate a query to post on our web and need to know how many days are in the current month.
A possible solution would be to piece together a datetime variable using getdate and dateadd then use a datepart.
However , I don't know how to create a datetime variable this way.
Thanks in advance
Hi and Thank you in advance
I am trying to find a away to calculate the number of business days between two dates. In other word, I do not want to count Saturday nor Sundays if those days are between the two dates.
Example
if Date1 = 11/26/1999
Date2 = 11/30/1999
the DateDiff(dd,Date1,Date2) the result should be 2
I need to do this against a table which might not have a lot of records, but I also need to not count Holidays if they fall within the two Dates.
Thank you in advance
Tomas
Hi and Thank you in advance
I am trying to find a away to calculate the number of business days between two dates. In other word, I do not want to count Saturday nor Sundays if those days are between the two dates.
Example
if Date1 = 11/26/1999
Date2 = 11/30/1999
the DateDiff(dd,Date1,Date2) the result should be 2
I need to do this against a table which might not have a lot of records, but I also need to not count Holidays if they fall within the two Dates.
Thank you in advance
Tomas
I know the ..Program FilesMicrosoft SQL ServerMSSQL.1MSSQLLOGErrorLog on the server contains the information. But that needs I to RDP to the server or open the file remotely. Is there any other way to find out the port from my SSMS connection?
I remember in SQL Server 2000 you could find the information by choosing Properties of a connection in EM and click on the Network Configuration button. (I know it works when you are ON THE SERVER! But when I tried from my desktop, pressing the button didn't do anything)
Canada DBA
i have a huge stored proc which has about 8-9 cursors which move data from a few temp tables to the final tables...and also do lots of calculations in between..
anytime there is an error in the stored proc i have an error page which looks like this
**********************
Server Error in '/WebApplication3' Application.
--------------------------------------------------------------------------------
Error converting data type varchar to bigint. 139 pdiscnum 37 3429 4978 139 139 4979 50.93 189.93 4980 -189.93 0 4981 139 139 4982 -139 0 4986 23 23 4987 0 23 4988 0 23 5121 139 162 5122 -328.93 -166.93 3430 4983 89 89 4984 -89 0 5096 89 89 5097 -178 -89 5135 89 0 5144 139 139 3431 4989 89 89 4990 -89 0 5100 89 89 5101 -178 -89 3432 4991 139 139 4992 4.32 143.32 4993 -143.32 0 5102 139 139 5103 -278 -139 3433 4994 139 139 4995 50.93 189.93 4996 8.64 198.57 4997 -198.57 0 5003 0 0 5123 139 139 5124 -328.93 -189.93 3434 4998 59 59 4999 -59 0 5000 59 59 5001 -59 0 5002 0 0 5041 19 19 5042 0 19 5043 -2.39 16.61 5044 -16.61 0 5045 19 19 5046 -2.39 16.61 5047 -16.61 0 5056 0 0 5084 39 39 5085 -5.85 33.15 5086 -49.76 -16.61 5104 59 42.39 5105 .........
************************************************
a very lengthy page...the numbers are prbly due to the print stmts of the results of some calculations...
but my q is..is there any way to return the xact line number where the error occured in the stored proc instead of these infinite list of numbers...its taking pretty long time to go through the entire stored proc to isolate the error...
thanks
dinakar
I am wanting to set up a trigger on our SQL server 2000 to create a sequential order line number in the OrderDetails table for OrderID.
I will be inserting data from an OrderLinesAdd table into the OrderLines table but want the LineNumber field to be incremented by 1 for each group of orders grouped by OrderID that I insert into the table eg.
OrderID LineNumber
1 - 1
1 - 2
1 - 3
2 - 1
2 - 2
3 - 1
3 - 2
I have just started using SQL so am not sure how I go about writing the code for the trigger ? It would seem like I will need to use the Max function in the code.
Thanking you in advance.
Hi there,
I have a matrix report that shows a certain columns and rows. I need a row counter to show me the amount of rows in that matrix but it doesn't count properly by using the expression: =Int(RowNumber("matrix1") -1)
I actually don't have any idea on what this expression should be to fix the row count...to illustrate what I get in the report:
______________________________________________________________________________
Chkp | Row | Serial No | Call of Date |Colour| Pillar | AV | Sport | USA | SRA | TAPE |
2019 | 1 | 7006892 | 2003/02/11 | 3644 | 78222 | 3902 | 9182 | | | |
| 3 | 7000123 | 2003/02/11 | 3299 | 17283 | | 9238 | 2793 | | |
| 5 | 7302031 | 2004/01/11 | 3902 | 28932 | | 3233 | 2332 | | |
| 7 | 7273211 | 2004/02/08 | 6727 | 39232 | 8228 | 3293 | | | |
| 8 | 7382728 | 2004/11/11 | 7822 | 32342 | 3902 | | | | |
| 13 | 7342934 | 2004/12/03 | 8323 | 23422 | 2031 | 9212 | 2934 | 2934 | 2982 |
| 18 | 7329491 | 2004/13/02 | 8291 | 92423 | 7922 | 0231 | 2342 | 2355 | 2223 |
| 22 | 7328438 | 2004/12/22 | 8399 | 92311 | | 0289 | 8392 | | 3982 |
As you can see above, the row count numbers are not lining up at all, it starts at 1, then jumps 2 every count then all of a sudden jumps 5 per line...a pattern that is interesting but difficult to understand. The unique value in this matrix is that serial number but even though i group it by the serial number, it still gives me the funny Row count values.
What would be the approach to solving this?
Regards
Mike
Example data
CA1000
CA10001
CA10002
CA10003
CA11597
CA11603
CA1001
CA998
CA999
As you can see, CA11603 is the largest number in this list.
When I try the follow sql code,
SELECT
MAX([MyCode])
FROM
[MyTable]
WHERE (SUBSTRING([MyCode], 1, 2) = 'CA')
The largest number comes back as CA997
When I try
MAX([MyCode])
FROM
[MyTable]
WHERE [MyCode] LIKE 'CA%'
The largest number comes back as CA997
SELECT
TOP 1 (SchoolMasterCode)
FROM
SchoolMaster
WHERE (SUBSTRING(SchoolMasterCode, 1, 2) = 'CA') ORDER BY Schoolmastercode
The largest comes back as CA10001
When I try....
SELECT
TOP 1 (SchoolMasterCode)
FROM
SchoolMaster
WHERE (SUBSTRING(SchoolMasterCode, 1, 2) = 'CA')
The largest comes back as CA1278
What am I doing wrong?
RecordNo Speed
-------- -----
1 0
2 0
3 0
4 0
5 23
6 66
7 48
8 0
9 31
10 0
11 34
12 23
The above data shows the speed of vehicle over a time period, given the above data I need to achieve the result below:
RecordNo Speed LastAcceleration
-------- ----- ----------------
1 0 0
2 0 0
3 0 0
4 0 0
5 23 23
6 66 66
7 48 66
8 0 66
9 31 31
10 0 31
11 34 34
12 23 34
The code below is almost there but falls over on Recordno 8:
select
curr.recordno,curr.speed
,CASE WHEN curr.speed >= ISNULL(prev.speed,0) THEN curr.speed
ELSE (
SELECT MAX(speed) FROM speedtest
WHERE recordno between (CASE WHEN curr.speed >= prev.speed then curr.recordindex else prev.recordno end ) and curr.recordno
[code]...
Hello all
Trying to delete some data from a SSCE (2005) DB produces the exception:
SqlCeException
There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C]
Here is the code I am using
string dsc = Application.StartupPath + "\FCDB07.sdf";
conn = new SqlCeConnection("DataSource = " + dsc);
conn.Open();
cmd = conn.CreateCommand();
cmd.CommandText = "DELETE FROM DataContainer WHERE FileName =" + dgContainers[0, SelRowIndex].Value.ToString();
cmd.ExecuteNonQuery(); //There was an error parsing the query. [ Token line number = 1,Token line offset = 43,Token in error = C ]
conn.Close();
Any Idea on What causes this?
TIA
Trophus
Hey all-
I'm trying to insert some values into an SQL Compact database on a WM6 device but there is something apparently wrong with my SQL statement...
The program is going to allow users to schedule an SMS message to be sent at a certain date and time. I'm using a database to keep track of the scheduled SMS messages. The database has 3 rows: phone number, message, and the date/time to be sent.
Here is the relevent code:
private void scheduleMenu_Click(object sender, EventArgs e)
{
//connect to DB and do our scheduling magic
string message = messageBox.Text; //should rename messageBox...
string phoneNum = phoneNumBox.Text;
string dataBase = @"Program FilesSMS_Scheduler2SMSDatabase.sdf";
//SqlCeEngine eng = new SqlCeEngine(dataBase);
SqlCeConnection conn = new SqlCeConnection("Data Source=" + dataBase);
conn.Open();
//insert phone number, message text, and date/time into DB
string cmd = "INSERT INTO Scheduler(phoneNum, message, date) VALUES("+ phoneNum + ", "+ message + ", "+ dateTimePicker1.Value +")";
SqlCeCommand cmdPhone = new SqlCeCommand(cmd,conn);
cmdPhone.ExecuteNonQuery(); //error occures here...
messageBox.Text = "";
MessageBox.Show("Message Scheduled!");
}
I'm guessing it doesn't like how I am trying to get the data from the different text boxes and the DateTimePicker to go inside the SQL command. Does anyone have any ideas on how to fix my SQL command or how to get data from a textbox and DateTimePicker to be inserted into a database a different way?
I need to build TSQL query to return the Last unit Cost from my table of movement of goods SL (on CTE) but the MAX(Datalc) must be Less or Equal to my HeaderInvoice.
This is my script:
With MaxDates as (
SELECT ref,
MAX(epcpond)[Unitcostprice],
MAX(datalc) MaxDate
FROM sl
[code]....
the problem I have right now is that the Unitcostprice of my table of goods movements has a top date greather than the date of my bill.
Example:
invoice date : 29.01.2015 unitcost on invoice line = 13,599722
Maxdate (CTE) : 19.03.2015 unitCost from my table of movement of goods = 14,075
That ´s not correct because the MAxdates > invoice date and the unitCost of 14,075 is the cost on 19.03.2015 and not just before my invoice date.
Hi,
I want set a specific port number of SQL Server(express) during installation not by Configuration Manager after install.
Is it possible?
Can you help me with SQL issue I€™m stuck on?
I wish to take source data that looks like this:
Invoic_num
Line_num
6658
0
6658
2
6658
8
7721
2
7721
3
And rebuild the line numbers like this:
Invoic_num
Line_num
6658
1
6658
2
6658
3
7721
1
7721
2
This seems completely impossible to me. So I was thinking that maybe a second procedure using update could be run against the table after the initial build.
hi all,
maybe this is not a serious problem, but I tried for days to come toi a solution without success.
My Problem:
I have have several flatfile sources I need to import into a sql-server 2005 DB.
It is very important for me to have the original line number from inside the source file for each record. The rowcount transform doesn't fit in for this task, because it accumulates all rows until the end of the dataflow.
I tried script components and it works fine if i assume there are no errors in my source. then I simply could declare a local variable and count it up and add a custom collumn to my output. But for errors in my source this won't work, because a second script component won't know the actual value of a package level variable, which i use to store the value, because i am only allowed to access this variable in the post execujte method of the script.
How can I achieve my goal? Please help me...
Thanks in advance .. Bernd
Hello everyone,
I'm having an issue with dynamically setting the Send Mail task's to field to decent sized recipient list(approx 15 email addys). The strange thing is that this same package works fine if I'm using a list of say 4 email addys. I have double checked everything I can think of....list is seperated by semicolons, each address looks good....and have ran script tasks to check my variables along the path of the package but so far have not found the reason. The error I get is below:
"The specified string is not in the form required for an e-mail address"
Also of note, these addresses are being populated from a table, that is then setting the To string of the send mail task via a seperate variable...that variable being populated from a foreach loop. Again, all of this works fine with a smaller recipient list. Any ideas?
The only thing I can think of right now is to run the send mail task within the foreach loop...but then I'll be sending a seperate email for each address and would like to avoid that if possible.
Thanks,
Adrian
Hi,
for some AP issue, the file I upload must be without the line feed/carriage return in the last line.
for example:
original fixed-length file (exported from SSIS)
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
4 <-- with line feed/carriage return in the last line
The file format that AP request. The file only has 3 records, so it should end in the third line.
line NO DATA
1 AA123456 50 60
2 BB123456 30 40
3 CC123456 80 90
Should I use script component to do it ? I am new for VB . Anyone would help me ?
Thank you all.
I need the Trend line for the following data in Line chart they are the following data. The following are the graph are my output and i need the trend line for these Key_gap value.
This is the link [URL] ....
I need the same trend line for the Bar-Chart in SSRS 2005.
I hope I'm posting this in the correct forum (forgive me if I'm not) since I'm not sure if this is an issue with inserting an item into a db or the processing of what I get out of it. I wrote a basic commenting system in which someone my post a comment about something written on the site. I wanted to keep it very simple, but I at least want the ability for a user to have newlines in their comment without having to hardcode a <br /> or something like that. Is there a way for me to detect a newline if someone, for example, is going to their next paragraph?
Let me know if you need a better explanation.
Thanks in advance!
G'day everyoneThat's a space between the ticks.It's all part of a longer script but seeing as the failure occurs online 1if exists (select * from dbo.sysobjects where id =object_id(N'[dbo].[config]') and OBJECTPROPERTY(id, N'IsUserTable') =1)drop table [dbo].[config]GOThat's three lines only. Does it matter that they're in Unicode?Any ideas?Kind regards,Bruce M. AxtensSoftware EngineerStrapper Technologies
View 3 Replies View RelatedWe have a line graph which plots the actual data points (x,y), everything is working fine with this graph. Now we need to add a trend line to this existing graph after going thro. the articles we came to know that there is no direct option in SSRS to draw a trend line. So we need to calculate the trend values ourselves which we need to plot as atrend line. This trend line is similar to the trend line which comes in Excel chart, do anyone know how to calculate the trend values from the actual data points. We got through several formulas, but were not clear, have anyone tried out exactly the same, if so please help us out by providing an example to calculate the trend values.
View 1 Replies View RelatedI have a line graph which shows positive and negative values. Is it possible to have the line one color when its negative and another when its positive?
kam
HEllo can anybody tell me how to monitor a long store procedure
line by line. Also how to put progress bar in it to tell user how
much is done.
Sabih.