Is the name of the last backup file recorded anywhere in SQL2K? I do backups every 2 hours, and want to restore backups from database A to database B once a day using the latest backup. Unfortunately the backup files don't have the time the backup started (e.g. 1600), but have the time they ended (I presume); e.g. 1604.
I want to automate the process; any suggestions on how to find the name of the last database file?
TIA,
Al
My backups are failing sometimes.My db size is around 400 GB and we are taking backup to the remote server. Free size available on the disk is showing 600 GB but my database full backup run more than 10 hrs and failed. The failure reason is there is not enough space on the disk.
What could be the possible failure reasons? It has more than the the database size on the backup server but why it is showed that msg on the job failures. I noticed same thing occurred couple of times in the past.
Is there any way to find how much the backup file will be generate before we run the backup job?
i.e. If we run the full backup of test1 database now, it will generate ....bak file for that test1 db
currently we are using maintenance plan and with compression (2008R2) and the database has TDE enabled
Hello:
We have, on a devlopment server, running a long_running transaction for
almost two days. It was still running. This morning I decided to look at
three of two backup devices under EM to see if any backups were made to
these devices during the last couple of days on a de,mand basis by anyone.
The first one had a backup and the second and third device did not.
Somehow, and for some unexplained reason, the following message was put
into the MSSQL error log (and pretty much the same message went into the NT
event viewer).
----------------------------------------------------------------------
99/02/23 10:05:45.81 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run02.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
99/02/23 10:05:48.48 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run02.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
99/02/23 10:05:49.17 kernel dbsvolopen: Backup device
'E:MSSQLBACKUPEaglePro2_run03.DAT' failed to open, operating system
error = 2(The system cannot find the file specified.)
---------------------------------------------------------------------
This error, I beleive, caused DR watson to kick off and we could only sopt
it and revive the long running transaction by rebooting the machine, of
course thus requiring us to restart the lon_running transaction.
It look like NT couldn't find the backup device and therefore activated the
drwatson executible or so it seems to me.
Has anyone experienced this error before? IS it caused by NT? Or that
perhaps a certain threshhold was reacched on NT and drwatson kicked in?Any
other ideas?
Any information that can be provided would be GREATLY appreciated. THanks.
David Spaisman
When importing data from a source server it is useful to know which rows have changed since the last import. Is there a good way to get this information from the SQL Server log files? Does "dbcc log" provide this function, for example? Is this something that is done a lot or would it be considered a kludge?
Thanks,
Ron Rice
Using SQL Server 2005 Server Management Studio, I attempted to back up a database, and received this error:
Backup failed: System.Data.SqlClient.SqlError: Backup and file manipulation operations (such as ALTER DATABASE ADD FILE) on a database must be serialized. Reissue the satement after the current backup or file manipulation is completed (Microsoft.SqlServer.Smo)
Program location:
at Microsoft.SqlServer.Management.Smo.Backup.SqlBackup(Server srv)
at Microsoft.SqlServer.Management.SqlManagerUI.BackupPropOptions.OnRunNow(Object sender)
Backup Options were set to:
Back up to the existing media set
Overwrite all existing backup sets
I am fairly new to SQL 2005. Can someone help me get past this issue? What other information do I need to provide?
Hi,
I'm having difficulty configuring a package to look for an xml configuration file that contains values for source/destination connection strings.
The goal is to be able to have a package and its configuration file on one file system and to be able to copy/move the file dtsx and dtsx.config between build/staging/production servers while only having to set the xml value for the source/destination configurations.
In the package, I've created an xml configuration file called zzz.config. I took the absolute path out of the location of the xml file so that I have
xml location = zzz.config
instead of
xml location = e:ssiszzz.config
I'm assuming that when it gets to the point of validating the location of that file, it starts by looking in the current directory where the package is found.
All is well as long as I execute the package through the execute package utility by double clicking on the package file.
The problem lies when configuring a job in the sql server agent, it doesn't seem to pick up the xml configuration values because its pointing to the old server and not the current server stored in the xml file. I'm assuming its because the current directory is not the package directory at this point.
How can I get around this? Do I have to move the xml config file (zzz.config) to another directory where the agent will look for?
I know I could configure this as an environment variable but this contradicts the point of having movable packages without any extra tweaks.
Any help would be appreciated.
Thanks,
Robin
What is the difference between "Files aned File Groups" backup and Partial Backup?
Looks like both are same.. Please comment.
I got full backup on daily schedule its taking more space on Drive because each file has more than 25GB.I am using SLQ server 2008R2 so I'm looking to take the backup with compression instead of uncompressed Backup. What are the impacts of compressed backup. Is there any problems with compressed backup while restoring the backup file.
View 8 Replies View RelatedI should restore a SQL Server 2005 Database from backup. The backup contains three files, named user.bak0, user.bak1 and user.bak2.
How is the syntax of the restore filelistonly and the restore database ... ?
I usualy write
restore filelistonly from disk = 'path and filenam.bak'
restore database. zy
from disk = 'path and filename.bak'
with replace,
move.....
move....
This works but I cannot use it with a splitted backup file. The files are much too big to put together to one file.
Thanks in advance for any help.
My customer got a total hard drive failure.After sending it to drive recovery specialist we were able to recover the LDF log file (MyDB_0.LDF).But the MDF file was completely destroyed (MyDB.MDF).They have a good full backup from a month ago.
1) Installed SQL Server 2012 on a new PC
2) Created a new database of same name (MyDB) - with same MDF and LDF file names as original
3) Took the new database offline
4) deleted the MDF and LDF files of the new database
5) put "MyDB_0.LDF" in the place of the LDF file I just deleted
6) put the database back on-line
7) after hitting F5 to refresh databases - it shows "MyDB (Recovery Pending)"
8) tried to do Tail Log Backup with this command
BACKUP LOG [MyDB] TO DISK = N'C:BACKUPMyDB_TailLog.bak'
WITH NO_TRUNCATE
And I get this error...
Msg 3447, Level 16, State 1, Line 3
Could not activate or scan all of the log files for database 'MyDB'.
The sad thing is I know we can get this data back using ApexSQL-Log. I can see all the transactions since the last full backup in this program - so the log file is not damaged. But my client doesn't want to pay the $2000 fee for this software.There has to be a way to restore this data, without having to purchase a third party tool.
I checked quickly one network and I ran into the folders; I found out the folder MSSQL backup, nothing strange so far. Within that folder, anyway, I found out several backup and one very huge file (datawarehouse) with extension FILE. I am wondering what can be? I got datawarehouse mdf of course and datawarehouse log but what is that huge file (1 TB)?
View 6 Replies View RelatedHi,
I tried to backup the master key by the following syntax :
OPEN MASTER KEY DECRYPTION BY PASSWORD = 'mypassword'
BACKUP MASTER KEY TO FILE = 'c: empmaster' ENCRYPTION BY PASSWORD = 'mypassword'
but it failed and i got the following message:
Cannot write into file 'c: empmaster'. Verify that you have write permissions, that the file path is valid, and that the file does not already exist.
NB: I am using the "sa" user to execute this command.
I know that we have a security permission issue , but where and how ?
Regards,
Tarek Ghazali
SQL Server MVP
Hi there,
After a bad server crash, the only remnant we have of our SQL server database are the .mdf and .ldf files in the MSSQL7/Data folder. Can we restore this database from either of these files and if so, what is the procedure? Sorry but I'm an SQL server newbie.
Thanks in advance,
Paul
Hi,
I dropped a SPROC, and was in the process of reacreating it when I lost power. Now I don't have the SPROC except for in an old backup file.
Is there anyway to get this without restoring the DB ? If not, can I easily restore to a different DB name and then delete it? My backups are on my live server and I don't want to overwrite my current DB with my backup :)
thanks for any suggestions!!
mike123
I rigth click my project , i choose add -> new item -> sql database
and i write
SqlConnection cc = new SqlConnection(@"Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|DataData.mdf;Integrated Security=True;User Instance=True");
when i code
cmd.CommandText = "Backup database Data to disk = 'C:\123.bak'";
i recieve Error
Could not locate entry in sysdatabases for database 'Data'. No entry found with that name. Make sure that the name is entered correctly.
BACKUP DATABASE is terminating abnormally.
help me to solve this problem please!!!
Thanks.
One of my databases is approxiamtely 1.5 GB's but when I run a backup the backup file explodes to 38GB's.
What is the proper usage of Shrink Database, is this safe or is there another method to reduce the size?
My database's log file is full. i want to backup it .
First i create a backup device named aa.
Than i use Enterprise to backup trasaction log.
But it popup an error messagebox.
The title is "Microsoft SQL-DMO(ODBC SQL state:42000)
The content is "write on 'aa' failed,status=112. See the SQL error log for more details.Backup or Restore operation terminating abnormally.
What's the matter ?
I am using SQL Server 7 and have about 5 databases. One of them has a data file of about 10 Meg, and most of the others are larger. I do a nightly backup to both a local and mapped drive. On both, the size of the backup file for this database is more than 500 Meg, but the rest appear to be an appropriate size. Does anyone know why this would be happening? The database works fine, it does not get a lot of insert/delete activity and I run DBCC every weekend. If anyone has any ideas I would sure like to hear from them.
View 1 Replies View RelatedHi,
How can we create a new D/B from a D/B Backup file (DataBase.Bak).
Thanks,
Princy
Hi,
I am new to SqlServer (I am using 7.0) and I have just recieved a database.bak file from one of our clients and I want to create a new D/B from this back up file ,I have already installed the MS SqlServer. Can you tell me how to do this.
Thanks,
Princy
Anyone have anything hints on getting the option of DELBKUP to work. I have a maintenance job that backs up the database. Also set to delete backups older than 1 day. This doesn't seem to be working.
Any thoughts.
Thanking you in advance.
Is the name of the most recent backup file for each database stored anywhere in SQL2K? I want execute a SQA job periodically that takes the BAK from database A and restores it over database B (using the T-SQL RESTORE DATABASE procedure), but I need to know the exact name of the .BAK file; i.e. I need to know the yyyymmddhhmm value at the end of that file.
TIA,
Al
Can you backup individual files within a file group.?
View 1 Replies View RelatedCan you backup individual files within a file group.?
View 1 Replies View RelatedHi,
I have a database which size is 64Go, and i backup it everyday with 1 day of retention.
But the maintenance plan don't delete the file older than 1 day.
This works fine for the other db.
Do you know what is the pb ?
regards.
I tried to use backup and restore database tasks to restore backup file but it does not work. The backup file I tried to restore in SQL server 2000 is from somewhere else (from my friend) and saved in cd-rom, not the one I created before.
How can I restore it to view in SQL server 2000 database?
Can you show me step by step?
Thanks for your help
Any easy way to compress backup file. I use SQL Server 2008 R2
View 3 Replies View RelatedHi all,
How can I see what is exact size of SQL server backup file while backup is running. The process is running for more than 2 hours, it is chewing up disk space (it already took about 20G), but the size of backup file is still showing as 0.
Thanks in advance
I would like to set up sort of schedule by using FTP to move database back up file from Production server to Staging server every night. Is someone telling me how to do this and any other good way to handle it? I appreciate help!
JQ
Hi This is chetan jain sql server DBA.
I came accross a probplem while synchronising production with DR in logshipping.
logshipping was stopped and the message was " Cannot copy the ......TRN . file is corrupted.
can anybody suggest that what should be done if TRN file is corrupted...because if i manully restore the logs at DR i will need every log file to sync Prod with Dr.log file that is corrupted cannot be skipped...neither it can be restored at Dr.
please suggest the solution..
Thanks in Advance...
Thanks in advance.
-- Chetan
hi
i am using isp_backup store procedure to get the daily backup of database and this is work fine but i have copy the database file in network sharing folder to use
following cmd
EXEC master..xp_cmdshell 'D:filename M:foldernam'
M: is network folder to window2003
but their no copy this folder
thank
I am considering some disaster recovery scenarios.
Lets assume my MDF is gone - the disks are dead.
The LDF is on a different disk channel. Lets assume its fine.
Can I make a "final" TLog backup from the "good" LDF file?
Maybe copy some-earlier-MDF file into place, would that enable a TLog backup from the LDF file?
'Coz if I can then I could use that as a route to getting a zero-loss recovery - make a final TLog backup, and then restore the whole lot from last FULL + All TLog backups thereafter.
Kristen
Hi Guys I need a samll help to create bat file for differential backup
SQL IN Minds