I have an application that connects to an externally hosted SQL server. The first time i go to the web page, the application times out. I can then immediately refresh and everything works. After a period of about 20-30 minutes of inactivity, the issue repeats itself.
This is very hard to trouble shoot.
Anyone know what to do?
If this post belongs somewhere else I appologize. I have spent several days trying to solve this problem with no luck. My site is online. Hosted at NeikoHosting. I can connect to the database remotely when adding a datacontrol. It tests fine. But when running the page it won't connect. Even if I go in and change the Web.Config connection string to a local Data Source provided to me by Neiko, it still won't work. It just won't connect. Here are the two connection strings in the Web.Config, minus my login info: Only the remote string will pass testing. Neither works on the site. <add name="yourchurchmychurchDBConnectionString" connectionString="Data Source=MSSQL2K-A;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
<add name="yourchurchmychurchDBConnectionString2" connectionString="Data Source=66.103.238.206;Initial Catalog=yourchurchmychurchDB;Persist Security Info=True;User ID=me;Password=pwd" providerName="System.Data.SqlClient" />
Here is the stack trace, if that helps.
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.OleDb.OleDbException: [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below. Stack Trace:
[OleDbException (0x80004005): [DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.]
System.Data.OleDb.OleDbConnectionInternal..ctor(OleDbConnectionString constr, OleDbConnection connection) +1131233
System.Data.OleDb.OleDbConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningObject) +53
System.Data.ProviderBase.DbConnectionFactory.CreateNonPooledConnection(DbConnection owningConnection, DbConnectionPoolGroup poolGroup) +27
System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +47
System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105
System.Data.OleDb.OleDbConnection.Open() +37
System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +137
System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable) +83
System.Web.UI.WebControls.SqlDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1770
System.Web.UI.DataSourceView.Select(DataSourceSelectArguments arguments, DataSourceViewSelectCallback callback) +17
System.Web.UI.WebControls.DataBoundControl.PerformSelect() +149
System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70
System.Web.UI.WebControls.FormView.DataBind() +4
System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82
System.Web.UI.WebControls.FormView.EnsureDataBound() +163
System.Web.UI.WebControls.CompositeDataBoundControl.CreateChildControls() +69
System.Web.UI.Control.EnsureChildControls() +87
System.Web.UI.Control.PreRenderRecursiveInternal() +50
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Control.PreRenderRecursiveInternal() +170
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
So....... HELP!!!!
Thank you!
SQL Server 2012VS 2010 SQL Server data toolsFTP Connection Manager - port 21, chunk size 1kb, passive mode=false, saved plain text pwDownloads 1 csv file to local directory on SQL Server box.This always works when run from the package. And always gives a timeout error when scheduled.
Message
Microsoft (R) SQL Server Execute Package Utility
Version 11.0.2100.60 for 64-bit
Started: 11:04:59 AM
Error: 2014-03-27 11:05:31.12
Code: 0xC001602A
[code]...
SQL Server Agent is set to Logon As my domain account, and in the package history it says "logged on as " my account.
I got this ERD and I have 2 questions about it:
What is the minimum number of times that R2 can appear in the connection? and what is the maximum?
A=5
B=5
C1=1
C2=2
When I create a new odbc connection to a SQL server 2005 Db I get a failure telling me dat de SQL server does not allow remote connections.
How can I allow the server to allow this.
Any help appreciated
regards
I am trying to create a logon trigger. As I am testing this, I discovered that each time I do a connection, I get 19 rows, inserted into my audit table. I ran profiler, and I see it is going through the logon trigger multiple times, for a single connection. So, what am I doing wrong? The code is fairly simplistic, and the profiler doesn't give a clue, as to what is going on. When I look at the output, I see the spid for the first couple of connections are different, then a spid, that is different from those 2 is in the next 17 rows. But, when I do an sp_who2, that spid does not exist.
This issue was noticed on a 2012 version, that I was first testing on, then had the same issue on a 2008 R2. I am currently testing on a 2014 version, that is doing the same thing. Is the logon trigger itself, firing, and causing this?
I also tried using the After Logon option, and got the same issue.
Here is the code:
CREATE TRIGGER LogonAuditTrigger
ON ALL SERVER WITH EXECUTE AS 'sa'
FOR LOGON
AS
BEGIN
DECLARE @Body NVARCHAR(2000),
[code]....
Hi
I have two machines, the one has Windows 2003 server and the other has Windows Xp Pro on.
The 2003 one has SQL Standard Edition 2000 on where as the XP Pro has MSDE 2000.
I'm trying to run a windows based app from the 2003 server and it connects to a database on the XP Pro PC.
When running the application i keep getting the following exception:
"A Transport-Level error has occured when sending the request to the server (Provider: Named Pipes Provider, error: 0 - The specified network name is no longer available)
After using Preformance monitor on the XP machine it seems that when the app starts and the user logins in it make a SQL connection but then the connection is lost then the exception pops up. then i click continue and try it again then it works, then a couple of secs when using the system it pops up again. The Performance Monitor Test shows that the SQL connection keep being lost. The network is fine. its has something to do with SQL and Named Pipes and stuff.
When running the app on the Xp machine and the Connection is made to the 2003 machine there is no problem.
There are other connection made to the Windows XP Machine but i doubt that it affects the app.
The Windows firewall is off as well.
Please can anyone help.
Hi,
I've worked with SQL Server plenty but never in this specific manner. Hoping someone can shed some light.I have a webform on web server A that needs to talk to a SQL server database that web server B accesses via its web application. I do not haveany privelidged access to server B or the sql server it uses (no FTP to webserver, no remote access via Enterprise Manager to the SQL server). The Admin of Server B told me that I can use a DSN connection to talk to the SQL server database that the web app on server B uses. He emailed me the names of the SQL database tables AND a copy of the web.config from server B which shows the DSN implemented like this:<appSettings> <add key="dsn" value="data source=sql3.domainname.net;database=dbname;User Id=dbuserid;password=dbpw;" /> <add key="default_language" value="en" /> <add key="error_email_to" value="someone@domainname.com" /> <add key="baseHref" value="http://www.mysite.com/" /> <add key="website_name" value="$$$$$$$$$$$$$$$$$" /></appSettings>
I was planning to run my webforms on Server A where I do have FTP, Control Panel, etc.So, I wrote this code into my VB.NET codebehind file.
Dim oODBCConnection As OdbcConnectionDim sConnString As String = _"Driver={SQL Server};" & _"Server=sql3.domainname.net;" & _"Database=dbname;" & _"Uid=dbuserid;" & _"Pwd=dbpw"oODBCConnection = New Odbc.OdbcConnection(sConnString)oODBCConnection.Open()... commands to access data and load something into a control on a webformoODBCConnection.Close()
When I attempt to run the webform in my browser from Server A. I'm getting this error:ERROR [08001] [Microsoft][ODBC SQL Server Driver][DBNETLIB]SQL Server does not exist or access denied. ERROR [01000] [Microsoft][ODBC SQL Server Driver][DBNETLIB]ConnectionOpen (Connect()).The error is EXACTLY the same whether I place the appSettings section in server A's web.config or leave them out.I have obvious questions about the error like...Might sql3.domainname.net simply be refusing communication requests that don't come from the Server B domain?Might the sql3.domainname.net be setup so that I need to use another protocol (not tcp/ip)?Might my code need to be changed to support this type of connection (i.e. I didn't code it right)?I spent some time reading http://support.microsoft.com/kb/328306/en-us but I'm at a loss as to what the best course is to take for debugging this.Thanks in advance for any insight you can offer.
Stewart
I would appreciate any help anyone can offer
I am developing a web application that needs to access SQL Server. I have implemented forms authentication. My Sql server is on another machine and I am unable to connect because ASPNET is a local account. Is there a way around this, I really need to keep forms authentication and I am forbidden to place Sql Server on the same machine
Hi all,
I am trying to connect to remote sql server in vb.net application.
I am getting an error "login failed for user'abc' ".
why am I getting this error, what could be the possible reason.
any help will be appreciated.
Hi,
Just want to know what I need to check to make sure the remote connection is configure properly other than "Enable the remote connection" for the server? what ports that need to open up if firewall is running on the Server Machine?
I tested with a remote user, it seems the application just hung there and wait.. wait.. it seems something block the connection.
No error message, If I ping from the remote PC to the server, the response time is in acceptable range.
Thanks!
hi
i added 2 databases to my SQL server on a machine next door using Microsoft SQL server management studio express... I made sure that the server allows remote connection
then from this computer i pass a connection string to my SQLCLient in VB2005 that looks a bit like this
Code: ( text )
ConnString = "Server=USER-PTDH8Z5ESHSQLEXPRESS;Database=FSS.MDB;Trusted_Con nection=True;User Instance=True"
for which it gives me this error when i open the connection
SQLConnecton.Open()
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Att emptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Log inNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.Creat ePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateOb ject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCrea teRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConne ction(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Flying_School_Scheduler.DBEngine.StartConnection() in
whats the big idea?
i'm in a bit of a tight schedule here... can anyone help me here?
We have a database on a shared SQL Server stored on our ISP's server. I canconnect to this via Enterprise Manager from our office, but when I try thesame from Enterprise Manager on my PC at home I get the following message:A connection could not be established to MFSERVER.Reason: SQL Server is not running or access denied.Any ideas?Thanks
View 1 Replies View Relatedhi
I am developing a web application using C# and SQL Server 2000. It works fine when the Application and DB are in same machine. Now I want to connect to the DB located in another machine in the same network.
I used the connection string as follows.
"Data Source=ip add,1433; user id=uid; password=pwd;"
"Data Source=machine name; user id=uid; password=pwd;"
but the appliation always throws the error:
"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)"
what is the problem in the connection. Do I need any special configuration that has to applied on the DB machine.
Anyone pls give a solution ASAP.
thanks in advance
yenkay
I am trying to connect to the SQL Server 2000 installed on Windows 2003 Server using VB .Net SQL Connection Class. I am getting an error
Error: An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
(provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
I'm currently connected to SQL Server 2005 over local network usint (TCP/IP)
every thing is well
The question is how to connect to the server over the intrenet?
my pc info
- windows xp sp2
- dsl line 512
- 2 giga ram
Hi,I trying to connect to the sql server in the network. The sqlserver is in the machine called "pinnacle". I am Using the following connection string to connect and i am getting the error "Sql server does not exist or Access denied"Public databaseConnectionStringSQL As String = "Data Source=(pinnacle);Initial Catalog=cms;Trusted_connection=True;User Id=dbuser;Password=password"Any help will be appriciated.Reagrds,Thiyasoft
View 4 Replies View RelatedDear All,I have TWO PCs, one of them having SQL Server 2005 Expressi get sure the TCP is enables , Active, Remote conneciton is enabled via TCP onlyfrom VS2005 (C#) i can add new sqlconnection contorl and configure it with any of the installed DBsbut when i got to the Other PC with VS2005 as well, i can't configure itall i can do is to see the server inthe server list.. but NO databases are retieved at all in the Select database drop down menu any solution or suggestion
View 1 Replies View RelatedHi, I have an issue with ASP.NET 2.0 and SQL Server 2005
My project when hosted in a machine its working, but in case of some other machine it is throwing the following error
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)I have turned off my firewall and network configuration for sql server and its also done as tcp/ip and named pipes…though it is not working …
The surprise is if I run using IDE its running , in the same machine after hosting it is not running, where the db is in another machine. What could be the problem? Any suggestions would be highly appreciated. Regards,Naveen
Regards,
Naveen
I know this is strickly not a website question, but dunno where else to post...To remotely admin and monitor some functions of the website, I wish to use a local application to connect to the MSSQL DB which is held on the remote webhosting serverI have the following code: Dim StrSQLUN As String = "[UN]"
Dim StrSQLPW As String = "[PW]"
Dim StrServer As String = "[IP][INSTANCE]"
Dim StrDB As String = "[DB]"
Dim strTimeOut As String = "Connection Timeout=0;"
Dim pStrSQLConn As String = "Server=" & StrServer & ";Database=" & StrDB & ";User Id=" & StrSQLUN & ";Password=" & StrSQLPW & ";" & strTimeOut
Dim sqlConn As New SqlClient.SqlConnection(pStrSQLConn)
If sqlConn.State = ConnectionState.Closed Then sqlConn.Open()
This has basically been take from the existing code on the website, but changing to the server details. I had just started dev'ing this app when the admins decided to move the SQL server over to a different server. It was working on the old one, but the new one doesn't. It just times out after whatever time you put in the timeout variable. 0=unlimited, and so just sits there.I am also using the MSSQL Server Management Studio locally to connect to the same database, and although slow, does connect after about a minute or so. I thought they would be using the same type of underlying connection to access the server and database? Is this correct?
Can they put restrictions in place for this specific sort of data access?Does anyone have any suggestions on how to resolve this issue??Thanks for any helpAdam.
Here is my environment and problem:
I have VWD 2005 and SSE 2005 installed on my local machine. I also have these installed on my Windows 2003 Server. I developed my database using SSE on my local machine but pointing to directory on my server. I have been developing the web app using VWD on my server. I now want to use VWD on my local machine and point to the project on my server. I am able to open the project. In order to access the database in the "Database Explorer" I use as my "Data Source", "MS SQL Server (SQL Client) and it attaches fine and I can see my tables and data.
Now for my problem:
When I try to run the application "VIew in Browser", which login.aspx page is my first page, I get the page, but it doesn't inherit my master page which has the basic navigation and layout. Then after I try to login I get this message.
The file "W:BBAppApp_DataTimeTracker.mdf" is on a network path that is not supported for database files.An attempt to attach an auto-named database for file W:BBAppApp_DataTimeTracker.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
Here is a portion of my web.config file for the connection string.<connectionStrings>
<remove name="LocalSqlServer" />
<add name="LocalSqlServer" connectionString="Data Source=.SQLExpress;Integrated Security=true;AttachDBFilename=|DataDirectory|TimeTracker.mdf;User Instance=true" />
My website I started with the source code for the TimeTracker start kit and have added more pages and changed the sitemap.
In general I guess I need to know how to handle using VWD on my local machine, but accessing the project on the server. The reason I'm doing this is because my colleague needs to be able to access the web app too to add pages to the site.
Thank you for any help.
HI I have installed VS 2005 with that SQL express edition came default and i then installde SQL server Enterprise Edition .....There i created database and tables and other my colleagues are not able to connect to the Database from there System...........I am using This on XP.......Is it possible to access databse from other remote systems .....IF yes What is the procedure to connect from my other computer to my database which is on XP not any Server OS..
View 7 Replies View RelatedI have a problem in connecting to my hosting database using .net file.
I am able connect to database with my ASP page.
Any sugession is greately appretiated!
Here is my code:
".net" page:
<%@ page language='vb' debug='true' %>
<%@ Import Namespace="System.Data" %>
<%@ Import Namespace="System.Data.SqlClient" %>
<html>
<script runat="server">
Sub Page_Load(Src As Object, E As EventArgs)
Dim MyConnection As SqlConnection
Dim da AS sqlDataAdaptor
Dim ds As DataSet
MyConnection = New SqlConnection("DSN=***;UID=***;PWD=***")
da = new sqlDataAdaptor("select * from city", MyConnection)
Try
MyConnection.open()
Response.write "Connection Success " & MyConnection.Database & "<br>"
catch sx AS sqlException
Response.write "Connection successful: <br>"
End Try
ds=new Dataset()
da.Fill(ds, "City")
With DataGrid1
.DataSource = ds.Tables("city").DefaultView
.DataBind()
End With
MyConnection.Close()
End Sub
</script>
<body>
<p>
<ASP:dataGrid id='DataGrid1' runat='server'/>
<p>
</body>
</html>
---------------------------------------------
"ASP" page:
Set DB = Server.CreateObject("ADODB.Connection")
DB.Open ConnectionString
SET RSCheckeMail = DB.Execute ("select * from city")
While not RSCheckeMail.eof
Response.write "City: " & RSCheckeMail("Name") & "<br>"
RSCheckeMail.Movenext
Wend
Thanks for your help in advance.
Hi all, I am new to SQL Server but I'm trying to learn it.. :)
I've created a database on my campus server. Now I want to configure it so that I can access the database from my laptop computer through internet.
I have an account in the SQL server installed on my remote server. I can connect to the remote server through remote connection.
I appreciate your help,
thank you,
chikitha5466
hi sql team i've been reading much of the ms walkthroughs and some forum how they solve sql server 2005 (express) remote connection but non of them squared my problem.
in my case since we dont have in-house web server i need the script (ASP) run from our domain host/hoster and the sql database will be somewhere in our office. i try making a local (LAN) run of script just to test if the connection (asp-to-sql dbase) was established and im getting all things work.
OUT PUT
http://images.cjb.net/114e8.gif
http://images.cjb.net/343e3.gif
problem/nightmare comes when i access the test script through domain host with error:
Microsoft OLE DB Provider for ODBC Drivers error '80004005'
[Microsoft][ODBC SQL Server Driver][TCP/IP Sockets]SQL Server does not exist or access denied.
i tried using the following connection string thinking it will work for me but nothing seems happen:
test connection 1
cn.Open "Driver={SQL Server};" & _
"Server=www.gpzgroup.com;" & _
"Address=10.0.0.254,1433;" & _
"Network=DBMSSOCN;" & _
"Database=testdb;" & _
"Uid=xx;" & _
"Pwd=xx;"
test connection 2
cn.Open "Driver={SQL Server};" & _
"Server=live-static-ip;" & _
"Address=10.0.0.254,1433;" & _
"Network=DBMSSOCN;" & _
"Database=testdb;" & _
"Uid=xx;" & _
"Pwd=xx;"
test connection 3
cn.Open "Provider=sqloledb;Network Library=DBMSSOCN;" & _
"Data Source=10.0.0.254,1433;" & _
"Initial Catalog=testdb;" & _
"User ID=xx;Password=xx;"
where i am getting wrong at this point?
your response will be greatly appreciated thanks.
I have a software to connect the SQL Server as DB, and it is ok to connect to the SQL Server 2000 on the remote server in our firm, but got errors when doing the connection to the SQL Server 2005. the error messages are:
Error #1:
ADO Error #-2147467259
Description SQL Network Interfaces: Error Locating Server/Instance Specified [xFFFFFFFF].
Source Microsoft SQL Native Client
Error #2:
ADO Error ##-2147467259
Description An error has occurred while establishing a connection to the server. When connection to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections.
Source Microsoft SQL Native Client
Error #3:
ADO Error ##-2147467259
Description Login timeout expired
Source Microsoft SQL Native Client
I'm using SQL Server 2005 version 9.00.1399.00, not the Express version. Should I update the SQL Server 2005 Network Configuration in SQL Server Configuation Manager? But I don't know what should be set to "Enable" or Disabled". Is any other place need be configured?
Thanks.
i use connection to connect to a remote sql server.Here are the details
provider :Native OLE DB/SQL Native client
Server :ip address
databaseelect respective database
authentication ql server
i have a problem and it comes up with this message
"Test Connection failed because of an error in initializing provider.Login timeout expired.An Error has occured when establishing a connection to the server .when connection sql server 2005 database,this failure may be caused by the fact that under default settings sql server does not allow remote connections"
i do the same locally and it works out fine.
what do i have to check.
I think remote connections are not opened.
Its been almost 2 months i start running a test script page to check if i made the remote connection until now its getting worst.
I did follow every bit of the instruction and pre-evaluation in fact the script is working locally with this string:
cn.Open "Driver={SQL Server};" & _
"Server=global-static-ip;" & _
"Address=local ip,1433;" & _
"Network=DBMSSOCN;" & _
"Database=testdb;" & _
"Uid=xx;" & _
"Pwd=xx;"
i also review the ff post for client and server trouble shooting tips:
http://blogs.msdn.com/sql_protocols/archive/2006/09/30/SQL-Server-2005-Remote-Connectivity-Issue-TroubleShooting.aspx
surface configuration, sql browser, firewall exemption...
and nothing seems change when i access the uploaded script.
is there anything i am missing?
by the way the script is uploaded by company.
I have installed SQL server 2005 express on my main server.
It has been installed with windows authentication.
I can use sqlcmd -S machinenameinstancename to connect to the server, but when I try to connect from another machine on my lan, I get the error about user not part of trusted sql connection msg 18452 level 14 state 1
I have tried using a windows username and password from my server to access it but that fails also.
Any help would be appreciated
This has probably been answered before, but...
I have a local SQL Server 2005 instance running, and I would like to have another user on my network connect to this instance. However, when he tries to connect, he always receives the same error message:
"An error has occured while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error 28: - Server doesnt' support requested protocol)"
So, I checked the properties for the server, and under the connections tab the allow remote connection box is checked.
Any clue where to look next?
hi
i added 2 databases to my SQL server on a machine next door using Microsoft SQL server management studio express... I made sure that the server allows remote connection
then from this computer i pass a connection string to my SQLCLient in VB2005 that looks a bit like this
Code: ( text )
ConnString = "Server=USER-PTDH8Z5ESHSQLEXPRESS;Database=FSS.MDB;Trusted_Con nection=True;User Instance=True"
for which it gives me this error when i open the connection
SQLConnecton.Open()
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified)
at System.Data.SqlClient.SqlInternalConnection.OnErro r(SqlException exception, Boolean breakConnection)
at System.Data.SqlClient.TdsParser.ThrowExceptionAndW arning(TdsParserStateObject stateObj)
at System.Data.SqlClient.TdsParser.Connect(ServerInfo serverInfo, SqlInternalConnectionTds connHandler, Boolean ignoreSniOpenTimeout, Int64 timerExpire, Boolean encrypt, Boolean trustServerCert, Boolean integratedSecurity, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Att emptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject)
at System.Data.SqlClient.SqlInternalConnectionTds.Log inNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart)
at System.Data.SqlClient.SqlInternalConnectionTds.Ope nLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlInternalConnectionTds..ct or(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance)
at System.Data.SqlClient.SqlConnectionFactory.CreateC onnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionFactory.Creat ePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options)
at System.Data.ProviderBase.DbConnectionPool.CreateOb ject(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.UserCrea teRequest(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionPool.GetConne ction(DbConnection owningObject)
at System.Data.ProviderBase.DbConnectionFactory.GetCo nnection(DbConnection owningConnection)
at System.Data.ProviderBase.DbConnectionClosed.OpenCo nnection(DbConnection outerConnection, DbConnectionFactory connectionFactory)
at System.Data.SqlClient.SqlConnection.Open()
at Flying_School_Scheduler.DBEngine.StartConnection() in
whats the big idea?
i'm in a bit of a tight schedule here... can anyone help me here? ??
Having all kinds of problems trying to establish a connection between a VB5 application and a remote server Sql Express database. The connection works fine with a user instance on my local machine. At one time I did have the remote connection working successfully using Sql Server authentication, whereby the application was passing the login and password through the connection string as so:
Provider=SQLNCLI.1;Persist Security Info=False;Data Source=<server name>sqlexpress;Database=<database name>;Uid=<userid>;Pwd=<password>;
I've been away from using this development database for several weeks. Things are little foggy from that initial effort, and I recently tried putting up a newer copy of the development database on this server from my local machine copy. That local database copy apparently didn't have authentication login/user used by the app, so I created the Login account and assigned the default database, then created the User account, referenced it to the Login account, and gave the user account a role as db_owner. Now when my app attempts to connect with aforementioned connect string, I get an error "Login failed for '< userid>'. I've redone this thing a hundred times and I still get this error. I did put a Windows Update on this server recently so don't know if that's an issue.
I could try using Windows authentication mode, but am not sure how to establish Logins/Users under this mode. Mainly, I'm don't know what the name of these accounts should be. Do you set the Windows login name up in both Login and User accounts? Below is a modified connect string I'd probably use for this mode:
Provider=SQLNCLI.1;Persist Security Info=False;Integrated Security=SSPI;Data Source=<servername>sqlexpress;Database=<database name>;
Any ideas or suggestion on things to try on either of these modes? At my wits on this and am up against the clock.
TIA ... Rick
Hi ,
After reading the SQLexpress weblog , I tried the solution and its still not working
http://blogs.msdn.com/sqlexpress/archive/2005/05/05/415084.aspx
The client computer gives me this:
Run-Time error -2147217843 (80040e4d)
Log-in failed for user "KitGuest"
The connection string in the ADO object in my testing VB6 program is:
my_connection.ConnectionString = "Provider=SQLOLEDB.1;Integrated Security=SSPI;Persist Security Info=False;User ID=kit;Initial Catalog=AdelaideMushroom;Data Source=KITSQLEXPRESS"
I am confused with the error massage as my conncection string is set to connect on UserID = Kit
I am not sure what is gone wrong. The same VB6 program runs perfectly on host machine
I am not sure is there anything to do with SQL Config. Manager's SQL server 2005 service's Log-ON setting:
Log On as - Build-in account: Network service
could Anyone who managed to get remote connection work give me some advise?? I am desperate. have read that weblog many times and do not know how to get it work