Hi! I'm a newbie to SSIS and I'm trying to insert a flat file into a table.
The flat file contains some bad data so I want to insert the data into a text column.
I'm getting the following error below... It seems like SSIS cannot find the row delimiter, but I just want to load the file into a text column as a single row. I am able to insert the data to a text column in SQL 2000 DTS. Is there a way to do this in SQL 2005?
Please help... and Thanks in advance!!
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092.
The component returned a failure code when the pipeline engine called PrimeOutput().
The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.
[Flat File Source [1]] Error: An error occurred while processing file \sss.sss on data row 1.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (1) returned error code 0xC0202092.
In a foreachloop, I am inserting records into a flat file which is working fine. But the thing is that as the file grows, it takes longer for it to locate the EOF(End of File) of the flat file so as to insert the records.
I have around 70-100 lines written to the file at each loop and there are more than 20k records to be looped. wihich means that at the end I should be having 1400k - 20000k line in the text file.
One solution would be to insert the records at the start of the file itself so that it does not has to lookup the EOF each time before writting.
Another would be to generate separate files and then merge it.
Any idea how can this can be done?
Beside this I have to zip the file and then SFTP to a given address.
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better way to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
How do I insert data from a flat file or .csv file into an existing SQL database???
Here what I've come up with thus far and I but it doesn't work. Can someone please help? Let me know if there is a better wway to do this... Idealy I'd like to write straight to the sql database and skip the datset all together...
I have rows in a table in a SQL Server 2005 that I want to send to a Flat file. When I am executing the task for the first time it is OK and works perfectly. But the problem is when I am trying to do it again. I seems like the path to the file and the filename dissappears after the first time and the execution failes with an error message that tells me that the file is invalid and dont exists.
I dont now why this is happening and its such an easy thing to do and I cant make it work.
I have a text file with a single column that i need to bulk insert into a table with 2 colums - an ID (with identity turned on) and col2
my text file looks like:
row1 row2 row3 ... row10
so my bulk insert i have like this: BULK INSERT test FROM 'd: estBig.txt' WITH ( DATAFILETYPE = 'char', FIELDTERMINATOR = ',', ROWTERMINATOR = ' ' )
but i get the error:
Server: Msg 4866, Level 17, State 66, Line 1 Bulk Insert fails. Column is too long in the data file for row 1, column 1. Make sure the field terminator and row terminator are specified correctly.
However, as you can see from the text file, there is only one column, so i dont have any field terminators.
I hope this is easy stuff for you.. First of all i searched the forum but didnt exactly find what iam searching for:
I have a File folder which contains 1..n Files of the same type. The files contain a DateValue at the beginning of each row. I now want to read the first Record of the file - extract the datevalue and search in my Importtable if there are any records with that Date. If there are allready Records with this date i know i allready imported that file and skip it in my For each File Container. If no records where found I want to copy them from the file to the table.
So I have a flatfile source and thoght I just make an oledb command task afterwards which looks like "Select count(*) from Import where Processdate = ?. and then a conditional split if the count == 0 or not... but i have problems getting the Count value out auf the OLD DB Command Task because everytime I try to add an outputcolumn i get the message: "An Output cannot be added to the output collection" and since there is no possibility to map an expression to the result...
I tried to workaround the problem using a lookup task.. but that seems to be the wrong way.
I have to insert the Values from the Flat Files , My table structures have Primary keys , how do i insert only the distinct values into the table without the ERROR VIOLATION OF Primary Key already exists a record.
Dropping and Adding Relationships after insert is a way but doesnt serve the whole purpose is there a way we can eliminate duplicate records based on their Primary key before inserting them into the Database.
I am having trouble importing a flat file that was extracted from an AS400 server, into a SQL 2005 DB table using Bulk Insert. This file contains a column (field) that is of a Packed Decimal data type. Data in all other fields is displayed normally when viewing this file in a text editor such as Note Pad or Text Pad, but this one field comes up with unknown encoding: squares, thick vertical lines, basically strange characters and no numeric data.
Does anyone have any experience dealing with file of this sort?
I am running a set of SQL statements on a SQL server, to insert flat file data into a SQL table. The flat file is already FTP'ed to the SQL server. I seem to be getting an error, which is possibly pointing to a permissions issue
The statements:
BULK INSERT [Jedox_prod].[dbo].[B_BP_Customer] FROM 'c:jedox_dailyjdcom4401.txt' WITH ( FIRSTROW = 2, MAXERRORS = 0, FIELDTERMINATOR = '|', ROWTERMINATOR = ' ' ) GO
The error is : Msg 4861, Level 16, State 1, Line 1 Cannot bulk load because the file "c:jedox_dailyjdcom4401.txt" could not be opened. Operating system error code 3(failed to retrieve text for this error. Reason: 1815)
If it is permissions issue, how do I overcome this?
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
I am new to SSIS and I thought maybe someone would give me tips for solving the problem I am facing.
Overview: I want to insert data contained in a flat file into several DB tables, which have N-M relations.
For illustration, I would explain the problem on a very simple DB: 1. The database contains the following 3 tables: EMPLOYEE (EMP_ID, EMP_NAME) PROJECT (PROJ_ID, PROJ_NAME) EMP_PROJ (EMP_ID, PROJ_ID) , where EMP_ID and PROJ_ID are foreign keys referencing records in the EMPLOYEE and PROJECT tables respectively.
2. Each entry in the falt file contains the following data: EMP_ID, EMP_NAME, PROJ_ID, PROJ_NAME
3. In SSIS, I have created a Data Flow Task containing: - a path from a Falt File Source to an SQL Server Destination (Table: Employee) - a path from a Falt File Source to an SQL Server Destination (Table: Project) - a path from a Falt File Source to an SQL Server Destination (Table: Emp_proj)
Note: I used SQL Server Destination, because I need to import a huge amount of data and I read that this component performs better than the OLE DB Destination!
Questions: 1. I would like to eliminate EMP_ID and PROJ_ID from the Flat File Source. Instead, I would like these fields to be generated automatically upon insertion. a. How can I do this and propagate the generated key among the different paths, which I have explained previously? b. Can I first generate the two keys somehow then the parallel insertions into the different tables should start using the generated keys?
2. Is my solution correct in the first place? Or is there another better way for inserting data which belong to N-N relations?
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
I am working in one company and currently I am assigned to new project for Data Migration from company X to our company Y using SSIS. I am totally new and i just completed 5 tutorial which was gien on MSDN website.
Basically client is going to send us first flat file with 1 million records with Header, Detail and Trailer records. I want to create a Package in such a way that it dumps all this first load into 7 to 8 different tables at a time. we also have to include functionlity for validation and error check. On successfull load error file should only return Header and Trailer but no detail records. If there are any errors then error file should contain Header, Detail records which were unable to load plus trailer which we have to sent back to client.
When 2nd file comes that time we have to check whether this is new records or change (update) one depending on Flag which tells it.
This is basically high level idea of my Package what i need to create. If u guys have any question then let me know.
I know you guys are very experienced one. Anyone of you please give me some detail idea on it I would really appricate it. I have very limited time line for it.
I'm new to SQL Server 2005 SSIS. I'm trying to do something very simple, but I cannot figure it out, PLEASE HELP!
I have a flat file, which I read and then insert the data in a database table, that works fine. The problem is that I don't want to insert duplicate records. For example; if I run the package again, it will appent to the table. What I need to do is that if the package runs again, check if the record already exist, based one two columns, date and hour, and do not insert the record.
I can't use DTS nor DTSwizard as I need to put it in a .sql and run it through a command line via .bat file (it's more for the users).
Each row ends with an EOL character, the fields are all fixed width, but I have a little problem here, some rows are empty but just with a EOL character.
Can we bulk insert only the desired column from a flat file to a table?
I am using SSIS to bulk insert from a file with more than 200 columns. I am trying to find a way I can bulk insert them to multiples table through SSIS.
The one way I can think is pre map the columns from the file to the destination tables. Build numerous Bulk Insert tasks to achieve that. But not sure if SSIS will let me do that.
I'm importing a large csv file two different ways - one with Bulk Import Task and the other way with the Data Flow Task (flat file source -> OLE DB destination).
With the Bulk Import Task I'm putting all the csv rows in one column. With the Data Flow Task I'm mapping each csv value to it's own column in the SQL table.
I used two different flat file sources and got the following:
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet Record Length 400
Positions Length FieldName
Record Type 01 1,2 L=2 Record Type (Always "01") 3,12 L=10 Site Name 13,19 L=7 Account Number 20,29 L=10 Sub Account 30,35 L=6 Balance 36,37 L=1 Active 37,41 L=5 Filler Record Type 02 1,2 L=2 Record Type (Always "02") 3,4 L=2 State 5,30 L=26 Address 31,41 L=11 Filler Record Type 03 1,2 L=2 Record Type (Always "03") 3,6 L=4 Coder 7,20 L=14 Locator ID 21,22 L=2 Age 23,41 L=19 Filler Record Type 04 1,2 L=2 Record Type (Always "04") 3,9 L=7 Process 10,19 L=10 Client 20,26 L=6 DOB 26,41 L=16 Filler Record Type 05 1,2 L=2 Record Type (Always "05") 3,16 L=14 Guarantor 17,22 L=6 Guar Account 23,23 L=1 Active Guar **There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet 01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use? I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
Hello Experts, I am createing one task (user control) in SSIS. I have property grid in my GUI and 2 buttons (OK & Cancle). PropertyGrid has Properties like SourceConnection, OutputConnection etc....right now I am able to populate Connections in list box next to Source and Output Property.
Now my question to you guys is depending on Source Connection it should read that text file associated with connection manager. After validation it should pick header (first line of text file bases on record type) and write it into new file when task is executed. I have following code for your reference. Please let me know I am going in right direction or not.. What should go here ? ->Under Class A
I am running my package in sql server 2012, in which i am giving network path for flat file destination. And its working fine. But if i give m local path, its giving me error " cannot open data file" ...
Here's a really annoying problem. Let's say you have a text file with 2 million rows.Delimiters all look good and rows are previewed well but the file has a missing row at say lin 1234567 - way deep in the file. When SSIS encounters the blank row, an error is raised and processing on the file STOPS! I verified this in by checking the SSIS log and have even developed an error routine to notify me via email when the error occurs (really cool if I do say so myself ). The main problem still remains - how to resume processing from the point of failure in the file? Any help is appreciated. Thanks.
I have a package A which is copied from another existing package B as most of the data structure and ETL mappings are same.
What I need to change in Package A is to change the file in Flat File Connection Manager. I can change it in the conneciton manager editor. However, it is automatically changed back to the previous one everytime when I try to Save All or run the package.
I also tried to copy/paste this Flat File Connection Manager in the same package but samething happen. The package file is not set 'Read Only" so anything else can Saved well except for the File name in connection manager.
Is this a bug? It would be very appreciated if anyone can give me any idea about this.
