Flat File Source Column Parsing Error

May 12, 2006

Hello All,

I have come across this issue with the Flat File Source when the delimiter is set to a comma.

"""KAILUA KONA,HI""","CA",

In the data snippet above and with the setting of using a comma as a column delimiter

and a " as the text qualifer.

the data will be parsed in this fashion:

"""KAILUA as a column:

HI""" as a column

CA as column

when it should be

"KAILUA,HI" as a column

CA as column.

Is there a way to let the Flat File Source to let it know not to parse the data in multiple quotes ?

Thank you

Eric Flores

View 5 Replies

Flat File Source - If An Error Occurs, Continue Parsing The Remaining Columns In The Row Before Failing

Jan 14, 2008

Hello everyone,

I have a package that extracts data from a Flat File. If any errors or truncation occur during the extraction of the input data, the package should fail. All fields that have erroneous values should be reported in the log file.

My Solution:
- I have created a Data Flow Task that contains a Flat File Source Adapter and a dummy destination.

- I have left the default "Error Output" configuration of the Flat File Source adapter, namely if a truncation or an error occur for a certain column, then the reaction is "Fail Component".

Problem:
This configuration gives me only the first erroneous column in the row being processed.

Question:
Is it possible to make the Flat File Source adapter continue parsing the current row before it fails? This way, I would be able to get all the erroneous columns in the row in one shot.

Thanks in advance...
Samar

View 6 Replies View Related

[Flat File Source [8885]] Error: The Column Data For Column CountryId Overflowed The Disk I/O Buffer.

Jul 31, 2007

Hi everyone,
I am using SSIS, and I got the folowing error, I am loading several CSV files in a OLE DB, Becasuse the file is finishing and the tak dont realize of the anormal termination, making an overflow.
So basically what i want is to control the anormal ending of the csv file.
please can anyone help me ???

I am getting the following error after replacing the '""' with '|'.
The replacng is done becasue some text sting contains "" wherein the DFT was throwing an error as " The column delimiter could not foun".

[Flat File Source [8885]] Error: The column data for column "CountryId" overflowed the disk I/O buffer.
[Flat File Source [8885]] Error: An error occurred while skipping data rows.
[DTS.Pipeline] Error: The PrimeOutput method on component "Flat File Source" (8885) returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure code is defined by the component, but the error is fatal and the pipeline stopped executing.

[DTS.Pipeline] Error: Thread "SourceThread0" has exited with error code 0xC0047038.

[DTS.Pipeline] Error: Thread "WorkThread0" received a shutdown signal and is terminating. The user requested a shutdown, or an error in another thread is causing the pipeline to shutdown.

[DTS.Pipeline] Error: Thread "WorkThread0" has exited with error code 0xC0047039.

[DTS.Pipeline] Information: Post Execute phase is beginning.

apprecite for immediate response.

Thanks in advance,
Anand

View 1 Replies View Related

How To Redirect The Error Of A Source Flat File To The Destination Flat File?

Nov 10, 2006

Hi all,

I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.

Debugging is succesful but i am not getting any error output in the Flat file destination file.

i had done exactly which is written in the msdn tutorial of SSIS.

Plz tell me why i am not getting the error output in the destination flat file?

thanx

View 1 Replies View Related

Flat File Connection Manager Throws Error When A Column Gets Added To The Flat File

Dec 27, 2006

Hi,

I have a situation where a tab limited text file is used to populate a sql server table.

The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?

View 5 Replies View Related

OLE DB Source To Flat File Destintation Using Fixed Width Columns - Determining Source Column Width

Feb 13, 2007

Hi,

I am trying to create a program that transfers tables to flat files.
At this point in time, I have suceeded in created one that creates delimited files.

However, I am now trying to create fixed-width files as you can do with the SSIS designer, but programatically.

Is there a way to programatically determine the width of a column from the source table? I can not seem to find any kind of function or member that stores this information or allows me to retrieve it.

I know what I need to change in order to set a width for a column, but I just don't know how to find the width without just asking the user to provide one.

View 5 Replies View Related

Adding New Column To Flat File Source Connection

Feb 1, 2007

What is the best way to deal with a flat file source when you need to add a new column? This happens constantly in our Data Warehouse, another field gets added to one of the files to be imported, as users want more data items. When I originally set the file up in Connection Managers, I used Suggest File Types, and then many adjustments made to data types and lengths on the Advanced Tab because Suggest File Types goofs a lot even if you say to use 1000 rows. I have been using the Advanced Tab revisions to minimize the Derived Column entries. The file is importing nightly. Now I have new fields added to this file, and when I open the Connection Manager for the file, it does not recognize the new columns in the file unless I click Reset Fields. If I click Reset Fields, it wipes out all the Advanced Tab revisions! If I don't click Reset Fields, it doesn't seem to recognize that the new fields are in the file?

Is it a waste of time to make Advanced Tab type and length changes? Is it a better strategy to just use Suggest Types, and not change anything, and take whatever you get and set up more Derived Column entries? How did the designers intend for file changes to be handled?

Or is there an easy way to add new fields to this import that I am overlooking? I am finding it MUCH more laborious to set up or to modify a file load in SSIS than in DTS. In DTS, I just Edit the transformation, and add the field to the Source and Destination lists, and I'm good to go. My boss isn't understanding why a "better" version is taking so much more work!

thanks,

Holly

View 11 Replies View Related

Flat File Source - How To Configure An Appropriate Column Delimiter?

Feb 19, 2008

Good day everyone,

I have a package that reads data from a CSV file, transforms it and finally loads it in a destination DB table.

My current problem lies in the parsing of the input flat file. I shall illustrate it using a small example.

Source File:
P;Product-1;Short Description for product 1
P;Product-2;Short Description for product 2

Problem:
I configured the flat file connection manager to use semicolon as the column separator. But then I have received some sample flat files where I found that the semicolon might be sometimes used as content of a column data.

Possible Solutions:
I have thought about 3 different solution and I would like to get your feedback and recommendations about them.

Alternative 1:
Use a complex column delimiter, which wouldn't be used in the data.

Example:
P#~#Product-1#~#Short Description for product 1
P#~#Product-2#~#Short Description for product 2

Question 1:
- Is it possible to define such a customized column delimiter for the Flat File Connection Manager?
- If yes, how can I do this?

Alternative 2:
Use double quotes around the data, which the Flat File Source Adapter must somehow recognize and trim before pushing the data down the Data Flow.

Example:
"P";"Product-1";"Short Description for product 1"
"P";"Product-2";"Short Description for product 2"

Question 2:
- Is it possible to configure the Flat File Source Adapter to work as described?
- If yes, how can I do this?

Alternative 3:
Use a Script Component and write the needed code for parsing the Flat File.

Question 3:
- Do you have further suggestions/ideas for solving this parsing problem?

Thanks in advance and my regards,
Samar

View 3 Replies View Related

Flat File Source Error

Feb 8, 2008

i am importing a file using the Flat File Data Flow Source, it works fine but seems to miss data records every so often (not entire rows, just records inside the rows). The file has 149 columns and usually has around 15,000 to 20,000 rows.

For example, this is a sample of the input:
AccountNum, CancelDate, CancelReason
123~2/2/08~ADC
345~2/1/08~CCC
789~2/5/08~CRC

After the Flat File Source imports the file I get back:
AccountNum, CancelDate, CancelReason
123~2/2/08~ADC
345~2/1/08~
789~2/5/08~CRC

has anyone ever seen this or heard of this happening. It is usually the same column that misses records and this only happens when it runs from a job (in debug mode it always works fine).

View 6 Replies View Related

Flat File Source For SSIS Package Don't Have Column In Destination Table: How To Add?

Apr 19, 2007

Hi all,

I am passing flat file source as a variable to Dtexec Utility. (like package.variables[User::varFileName].Value;"D:sourcedata.txt).

Destination table is having one more column.

I want to add custom value in that column at run time by parameter to Dtexec(User::varDate)

I dont know how to do it, please help me.

Madhukar

View 4 Replies View Related

SSIS Randomly Empties Out Column Data While Using Flat File Source

Jan 12, 2007

I'm having a problem using the Flat File Source while using the underlying .Net classes to execute SSIS Packages. The issue is that for some reason when I load a flat file it Empty's out columns randomly. Its happening in the Flat File Source Task. By random I mean that most of the times all the data gets loaded but sometimes it doesnt and it empty's out column data. Interestingly enough this is random and even the emptying out of columns isnt a complete empty, its more like a 90% emtpying. Now you'll ask that is the file different everytime and the answer is NO. Its the same file everytime. If I run the same file everytime for 10 times it would empty out various columns maybe 1 of those times. This doesnt seem to be a problem while working with dtexec or the Package Executor utility. Need Help!!

View 9 Replies View Related

Flat File Source - Continue On Error?

Oct 20, 2007

Hi

I have a CSV file which sometimes contains the odd CSV error, for this reason the odd row throws an error.

If I have a clean CSV file my SSIS package works great, but I am having problems getting the package to continue past the rows in the file that throw errors.

How do I :

Get the package to continue on error, I have tried playing with the Propagate Variable with no joy

Add an Error event, which will capture the error and log it to a SQL table or File Destination?
Any help will be great!

Thank you

View 3 Replies View Related

Flat File Source Error Output Conversion Error With UNICODE Files

May 14, 2008

i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.

simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".

i hope you can help me with issue.

Thanks in advance.

View 5 Replies View Related

Potential Loss Of Data Error On Flat File Source

Nov 19, 2007

I'm getting a very strange potential loss of data error on my flat file source in the data flow. The flat file is fixed width and the column in question is defined as numeric [DT_NUMERIC]. The transform runs great if this column IS NOT A ZERO. As soon as a zero value is found, I get the error. It errors on the flat file source, so I haven't been able to use a data viewer to see what's going on.

Please Help!?

Thanks,
Scott Mescall

View 8 Replies View Related

Flat File Connection Manager Not Parsing File Correctly

Apr 3, 2007

Hi,

I have a flat file, comma-delimited, with strings in double-quotes.

In the connection manager for the file, I have specified that the Text Qualifier = ""

However, in the preview tab, it still shows the strings as surrounded by the quotes, e.g. "mycol1" whereas it should show mycol1 without the quotes.

Next, when I examine the data in the database after the load, it's messed up there also.

"mycol1" ends up in the database as "mycol1

"mycol2" ends up as "mycol2

This is not right.

I have format set to delimited, header row delimiter crlf, etc.

Any ideas?

Thanks

View 3 Replies View Related

Another Flat File Parsing Problem

Dec 5, 2006

Hello All!

I know this has come up before and I have tried several of the solutions found within the forum but I just can't seem to import my file correctly and could use some input, please.

Sample file (less fields than actual file):

Name (str), Phone# (str), Description(str), Resolved(bool), Met(bool)

"Kay, Mary","123-4567","Used a "."not a"," in text", "1", "1"

The text is qualified with " and columns delimited with commas but the description field has embedded quotes and commas. Normally it works except if there embedded quotes and commas.

I have tried unqualified data and undouble, but that does not work either because of the embedded commas in quotes.

Do I need to do something before the data flow? Do I need to do custom code similar to undouble (I tried modifying undouble but using unqualified fields caused the source file to not like the data and go red)? Should the row be read as one field and parsed?

Thanks in advance for any help you can give!

View 12 Replies View Related

Output Column Width Not Refected In The Flat File That Is Created Using A Flat File Destination?

May 11, 2006

I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?

Any inputs will be appreciated.

M.Shah

View 3 Replies View Related

Extract Column Data From Flat File Error Output

Dec 10, 2007

Hi Friend,

I am stuck with a problem and need your help. As we know, all columns that go to error flow of flat file source connection are displayed as a single column e.g. FlatFileSourceErrorOutputColumn, but my requirement is to extract the first column value from this FlatFileSourceErrorOutputColumn, my data is dilimeted by "|" pipe operator. I have created a script component to deal with this. However if we take FlatFileSourceErrorOutputColumn column as input column in script component, it comes as BLOB data. I wrote below code in transformation script component to extract BLOB data from column in string form and then do a Left function search to take first column out.

When I am running this script component I am getting '??????????' question marks as a result in Row.Pname.

Can anyone please help me understand if I am doing anything wrong in this script or suggest a better way to take the data out?

I appreciate your help.

Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)

'

'

Dim Error_Data As String

Dim Column_1 As String

Dim Len As Integer

Dim Buffer As Byte()

Buffer = Row.FlatFileSourceErrorOutputColumn.GetBlobData(0, CInt(Row.FlatFileSourceErrorOutputColumn.Length))

Error_Data = System.Text.Encoding.Unicode.GetString(Buffer)

Len = Error_Data.IndexOf("|")

Column_1 = Left(Error_Data, Len - 1)

Row.Pname = Column_1

End Sub

Thanks,
Kul

View 5 Replies View Related

Rounding Error: Between Flat File Connection Manager Source && OLE DB Connection Destination (SQL Server 2005)

Jun 22, 2006

I have a Rounding error: Between flat file connection manager Source & OLE DB Connection Destination (SQL Server 2005) in my Dataflow.

File looks like this lets call column names Col A,B,C,D

70410000 RD1 1223631.92 196042.42
70329000 ICD 11025.84 3353.88
71167300 COL 104270.59 24676.96

flat file connection manager settings: first row Column names then Advanced tab Col A float , Col B float , Col C string ,Col D float ,

OLE DB Connection Destination (SQL Server 2005)

CREATE TABLE [dbo].[PT_CUST_ABR](

[PARTY_NO] [float] NULL,

[PARTY_NAME] [varchar](75) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,

[TELECOMABR] [float] NULL,

[GENIABR] [float] NULL,

Problem: ColA (Source) Rounding error to PARTY_NO (Destination)
I have a field of text of in a flat file that the flat file connection manager Source picks up correctly ��70000893�?
However when it gets the OLE DB Connection Destination the data has changed to 70000896. That��s before its even Written to the database.
The only clue that something is wrong in the middle is the great Data viewer shows the number as 7.000009E+07
Other clues looking at the data it appears there is a rounding error on only the number that dont end in 00
ColA (Source) PARTY_NO (Destination)
71167300 71167296
70329000 70329000
70410000 70410000
Any ideas people?
Thanks in advance
Dave

View 3 Replies View Related

Regarding The Dynamic File Change Within Flat File Source.

Mar 28, 2006

Hi,

we have one requirement to run the package daily basis.

The package should run at specific time on that day.

we are using windows schedular for that.

we will have one new flatfile everyday.

Is there any process to attach this file to flat file source dynamically?

The requirement is,

The flat file should be able to read the new flatfile everyday.

we have no option change it manually, the flatfile source should have to take the file automatically at that time.

So that it can take that flatfile and load it into database table.

View 1 Replies View Related

Check File For Being Used By Some Other Process When Using Flat File Source

Feb 14, 2007

I am wondering how easy is to check for file locks and have our SSIS Package to wait until file has been release by the process which is using it.

Also, same question when we're writing to a Flat File (or Flat File Destination).

Thanks,

View 3 Replies View Related

Flat File As Source

Aug 15, 2007

Hello Ereryone,

I have Flat File as my source. Before i tried to load the data in to ORACLE Destination thru SCD component the error was with ole db.

any ways i try to load the data in Access DB but I��m getting different error in same component (OLE DB) After SCD Component. can any one help me out in this.

thank you

View 1 Replies View Related

Flat File Source, Please Help !!

Mar 6, 2006

Hi all

I have some problems with the "Flat File Source" ...
I am trying to load a textfile, but IS allways cuts the rows ...
When I look at the preview while designing, the row is complete,
so I am wondering what IS is doing ...

Thanks for any comments

Best regards
Frank Uray

Here is what I am trying to load (one row from the file):
WPBX1 1.2 19330065002695435000 001200526000 000020002002-11-13-11.17.55.2220262006-03-03-05.50.44.322629002000010001AG2006-03-03-05.50.44.322629WIS030EPF033200602173410567000101 271275 2006030220060303200603032006030320060303 200603032006030320060303 200603032006030320060303200603031 0.000 200.000A UWCE 1 24617 10844890000000000 0.000000 0.000 0.000 0 149.500 149.500 149.500 00100010 0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00 1.000000000000000E+00 1.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+0000 0000000001CV ÊÊ 00 1.150 200.000 0001-01-01-00.00.00.00000000120052600071200180K 712 71550 230.000 230.000 230.000 0.000 230.0000010 C 100.000000 2006-03-03-05.50.44.3226291567 230.000 230.000 230.000 0.000 230.0000010?C 100.000000 2006-03-03-05.50.44.3226291568 230.000 230.000 230.000 0.000 230.0000010?C 100.000000 2006-03-03-05.50.44.3226291585 230.000 230.000 230.000 0.000 230.0000010?C 100.000000 2006-03-03-05.50.44.3226291590 -80.500 -80.500 -80.500 0.000 -80.5000010?C 35.000000 2006-03-03-05.50.44.3226291640 -80.500 -80.500 -80.500 0.000 -80.5000010 C 35.000000 2006-03-03-05.50.44.3226291830 149.499 149.499 149.499 0.000 149.4990010?C 65.000000 2006-03-03-05.50.44.322629

On SQL Server I get only this:
WPBX1 1.2 19330065002695435000 001200526000 000020002002-11-13-11.17.55.2220262006-03-03-05.50.44.322629002000010001AG2006-03-03-05.50.44.322629WIS030EPF033200602173410567000101 271275 2006030220060303200603032006030320060303 200603032006030320060303 200603032006030320060303200603031 0.000 200.000A UWCE 1 24617 10844890000000000 0.000000 0.000 0.000 0 149.500 149.500 149.500 00100010 0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+00 1.000000000000000E+00 1.000000000000000E+00 0.000000000000000E+00 0.000000000000000E+0000 0000000001CV

View 7 Replies View Related

Flat File Source Nightmare

Sep 24, 2006

I've been working 4 days non stop on this project, lost a complete weekend on it and I totally had it.
Please have a look at this "simple" question:

I have a for each loop that checks for csv files in a folder. The path of the file(s) is stored in a variable varFileName.
So far so good. But then I start with a data flow task and inside that data flow task I need to access one of those csv files at the time whenever it loops.

So my best guess is use a flat file source because that's the only task I see in the list that fits my question.
But the thing is, you set up a connection to a....yes right, a flat source connection and there you have to select a flat file.

But no, I don't want to select ONE file, I need to access them all as the loop goes through all files.
I'm sure this is something easy but I don't see it anymore.

I'm off taking a nap, need sleep
Could someone please point me to a direction?

Many thanks!

Worf

View 5 Replies View Related

Flat File (CSV) Source Format

May 3, 2007

I have a SSIS package loading a lot of CSV file, which first line is the column head. Some file are ordered differently. However, package still try to load the file use predefined column order (it seems it doesn't check the head of each file see if it matchs the predefined column order).

Any way to force the package the check each file's head? or I had to manually check it using VB.Net script?

View 1 Replies View Related

FLAT FILE SOURCE DYNAMICALLY

Dec 1, 2007

hi all

I have a table which has the paths where the source files need to be collected.

So I have a set of files which I need to collect. So I need to iterate through the result set which retrieves the paths

where the files can be found and set this dynamically to connection string of flat file connection manager.

Can anyone please let me know how to do this.

Can you be a little elaborate as to how we can do this because I am really new to SSIS.

Please help me as I am new to SSIS.

Thanks

Sai

View 1 Replies View Related

Variable Flat File Source

Mar 7, 2007

I am trying to make a SSIS package that will loop trough all files in a directory and load information from them.

I can do this with Raw File Sources since they allow me to use a variable name as the file path, but I cant seem to do the same with Flat File Sources. Is there a way to change the connection to a Flat File Source on each iteration of a loop? Actually, if this is possible with all types of file sources (like excel files) I would love to know about it too.

I was thinking about renaming the file through a script task but that does not seem like the most elegant solution so decided to see if some one here knows of a more proper way before I go that direction.

View 1 Replies View Related

Flat File Data Source

Aug 29, 2006

Is there away to use wild card in the file name for the flat file data source?

Like //servername/directory/*.txt

View 5 Replies View Related

Flat File Source Queston

May 17, 2006

I want to read the following file using the Flat File Source flow:

10000 Router
20000 Hub
10000 Switch
30000 Server
40000 Harddisk

Spaces are used between the numbers (e.g. 10000) and the following text (e.g. Router). Each line is temrinated by a {CR}{LF} pair. I would normally think of this as a "fixed width" file.

But in the Flat File connection manager, if I use format "Fixed width", the preview shows a row width of 1 character wide (the first row contains the number "1"; the next row contains "0", and so on for the remaining 3 rows.in the first line) Not what I had in mind. How do I setup SSIS to handle this file in intended maner?

TIA,

Barker

P.S. I never had any trouble with this type of file under Sql 2000 DTS. Also, have you noticed the crappy-looking "bitmap" displayed when one wants to click and define columns for a fixed-width file?

View 4 Replies View Related

OLEDB Source To Flat File

Jun 7, 2007

Hi,

I'm using an OLEDBSource to select some data and then putting to in a Flat File destination.

However, when I look at the data in the OLEDBSource, they�re like this:

1. id

2. name

3. address

...but in the flatfile it comes out in the wrong order.

How can I fix this?

Thank you so much.

View 1 Replies View Related

Flat File Source Problem...

Jan 17, 2007

I have a weird thing happening.
I have an .csv file. When I try to load it into a table, I can do it easily in DTS 2000. But when I am trying to do it in SSIS 2005 with exactly the same settings (like Text qualifier, row delimiter etc.), I am getting an error: "The last row in the sampled data is incomplete. The column or the row delimiter may be missing or the text is qualified incorrectly." I looked at the file and it looks complete to me.

What could be the problem ?

P.S. DTS 2000 is on 32-bit Windows, and SSIS 2005 is on 64-bit Windows 2003. Could that we a problem ?

View 19 Replies View Related

Reading From SSIS Flat File Source?

Feb 9, 2012

I have a simple SSIS package -> It reads a local text file which has 10 rows of data ( id, name, telephone # ) and puts it into a table.

It uses the "SSIS Flat File source" to read and a "SQL Command" to insert into the table. I can see that it reads line by line and puts each line into one row in my table.

Now, my production data is over 5 GiG of mainframe data and it seems their data is arranged in some hierarchical form.. so the position or arrangement of data in that file is important.

I pulled the data using my package and as far as I can see , my SSIS package pulled one line at a time ( from the flat file) and pushed it into my table. For each row, I also created an identity column in my table to be able to identify the positional arrangement of the hierarchical data and then use relational mappings to suit our business needs.

In all of this, my assumption is -

"SSIS reads one line at a time, inserts to my table and goes down to the next line .

It does NOT read a snapshot of rows from the flat file so as to write them into the table using internal ordering methods based on that particular snapshot "

My question is .. is my assumption correct ?

View 1 Replies View Related

Redirect Bad Data From Flat File Source

Apr 17, 2008

Hi, all,

I have this SSIS data flow ( Flat file to sql server) that I want to add a step to redirect any "bad" data instead of fail out.

I had the red arrow hocked up to a sql new table to dump the bad data, but the flow still failed.

Here is the first error, and I knew what was wrong. A description field in that line has pipe(|) character in it, which also happen to be the column delimiter in this case.

[Flat File Source [1]] Error: Data conversion failed. The data conversion for column "Column 22" returned status value 4 and status text "Text was truncated or one or more characters had no match in the target code page.".

I knew if I fixed the data, every thing will be fine, but I just want to use this redirect feature of SSIS. Is there a place where I can turn off validation, or do something to make it work?

Thanks!

View 8 Replies View Related