Other than using the -o parameter of ISQL, is there any way to mimic the DBMS_OUTPUT.PUT_FILE capability that exists in ORACLE (also set serveroutput xxx). I have a big need to run both queries and stored procedures and have the output placed in a flat file. This flat file will then be edited and loaded into another SQLServer 7.0 table. Basically,
SP or SQL stmt -> output to flat file -> external manipulation -> SQL table
Thanks in advance.
I am transferring data from an OLEDB source to a Flat File Destination and I want the column width for all of the output columns to 30 (max width amongst the columns selected), but that is not refected in the Fixed Width Flat File that got created. The outputcolumnwidth seems to be the same as the inputcolumnwidth. Is there any other setting that I am possibly missing or is this a possible defect?
The following bcp command is present in an NT job I have scheduled each daybcp "EXECUTE DailyProd.dbo.GetIndexComponentStocks_XML '2006-04-05'" queryout "D:TABLESINPUTAPIndexComponentStocks.wrk" -S(local) -c -T -o"..IndexComponenet_XML_LOG.txt" -e"..IndexComponenet_XML_ERR.txt" My trouble is that every 2034 characters the output contains a :0D:0A (CR/Linefeed).
Other than that all the output data looks peachy.
Is there some line size setting I am missing (would it be packetsize?)?
Ideally I would just like to not have any CR/LF in my file at all...is there some way to turn it off? I see there are flags to set to change the column and row terminators, but how to turn them OFF???
I am using a simple input from an SQL data base where I have 4 dates defined as type D. I am writing to a flat file with the fileds defined with any available date format and the output on the flat file comes out as "mm/dd/yy 00:00". I'd like to just have the date portion with no time. The input does not have a time on it so I understand the 00:00 as the value. It seems that I shouldn't have to do any extra work as it is date to date. I've seen the gyrations for a date from the SQL database when it is a character field, but that's not the issue here.
I tried to find some information about this, but surprisingly can't seem to find anything. Seems like it would be a very common scenario.
I need to send the output of a stored procedure to a flat file. First, I created an Execute SQL Task that calls the stored procedure. I selected "full result set."
My first question is, how do I capture the individual column values? For example, under "Result Set", should I create an Object variable, or should I use individual column variables? I've tried both ways, but can't seem to get to the next item, below...
Now, how do I map the variables to the flat file? If I use a data flow task, the flat file has "no available inputs". If I add an OLE DB Source before the flat file destination, there's no place to capture the result set.
I am moving data from a flat file source to a SQL Server table. But I want to add a columm that IS in the destination table, but NOT in the source file. Say the table column name is XXX in destination table, and there will be a global variable called @[User::XXX] that remains constant throughout the package. I would like to put the variable value into the destination column, even though the source file does not contain the field. Is there an easy way to do this?
I cannot seem to get my flat file to write columns in error when inserting into a SQL table. I have tried a few examples from MS and did not get anything written to my flat file output. I have set the Source Error Output on this flat file and it uses a script task to created the error description and then write it to a Flat File Destination.
I am new to SSIS and have not had any formal training on it. However, I am very familiar with VS.Net/c# and SQL 2000 DTS - I need to get this working ASAP as there are 45 total flat files that need to be processed. Once I have this solved for one, the rest will follow suit.
I have a SSIS package that dumps data from an internal table to a flat file output using standard data flow tasks. The entire table is output - no special SQL. Most of the time the records are placed in the output file in the same order as the internal DB table, but occasionally the order appears to be more random. When that happens, the record order in the internal table is correct - it is just the output.
I can find no properties that seem to affect this. I would appreciate any hints and advice that anyone can give me. Has anyone else encountered this same problem?
I am stuck with a problem and need your help. As we know, all columns that go to error flow of flat file source connection are displayed as a single column e.g. FlatFileSourceErrorOutputColumn, but my requirement is to extract the first column value from this FlatFileSourceErrorOutputColumn, my data is dilimeted by "|" pipe operator. I have created a script component to deal with this. However if we take FlatFileSourceErrorOutputColumn column as input column in script component, it comes as BLOB data. I wrote below code in transformation script component to extract BLOB data from column in string form and then do a Left function search to take first column out.
When I am running this script component I am getting '??????????' question marks as a result in Row.Pname.
Can anyone please help me understand if I am doing anything wrong in this script or suggest a better way to take the data out?
I appreciate your help.
Public Overrides Sub Input0_ProcessInputRow(ByVal Row As Input0Buffer)
I have a text file that is comma delimited and im pulling it in with a flatfile connection manager. I want to read some of the data, then output another flat file but in a fixed column width. What settings do I made to the connection manager of the output flatfile ?
how do I make the output columns padded with extra space ? I intentionally set my output width larger than the input width, but the generated file is still jamming all the columns next to each other
I want to make a very simple package: Export all rows in a table to a flat file. This package I can create pretty much by only using the wizards. Now to my problems:
H is a header post, in this case with date and time following. D is a details post, that is all the rows that was exported. E is and end post, containing only the number of rows in the file, including H and E posts.
2) I need to set the file name dynamically, preferably using date and time to name the file.
Ive done this very same thing in T-SQL, like so:
Code Snippet USE AVK GO SET TRANSACTION ISOLATION LEVEL SNAPSHOT; GO SELECT * FROM tempProducts GO CREATE VIEW EXPORT_ORDERS AS SELECT 1 AS ROW_ORDER, 'H' + REPLACE(CONVERT(char(8), GETDATE(), 112) + CONVERT(char(8), GETDATE(), 108), ':', '') AS Data_Line UNION ALL SELECT 2 AS ROW_ORDER, 'D' + COALESCE (CONVERT(char(10), LBTyp), '') + COALESCE (CONVERT(char(50), Description), '') + COALESCE (CONVERT(char(5), Volume), '') AS Data_Line FROM dbo.tempProducts UNION ALL SELECT 3 AS ROW_ORDER, 'E' + RIGHT('0000000000' + RTRIM(CONVERT(char(13), COUNT(*) + 2)), 11) AS Data_Line FROM dbo.tempProducts AS tempProducts_1 GO IF @@ROWCOUNT > 0 BEGIN BEGIN TRANSACTION SELECT * FROM tempProducts DECLARE @date char(8) DECLARE @time char(8) DECLARE @sql VARCHAR(150) SELECT @date = CONVERT(char(8), getdate(),112) SELECT @time = CONVERT(char(8), getdate(),108) SELECT @time = REPLACE(@time,':','')
DECLARE @dt char(14) SELECT @dt = @date + '_' + @time SELECT @sql = 'bcp "SELECT Data_Line FROM avk..EXPORT_ORDERS ORDER BY ROW_ORDER" queryout "c:AVK_' + @dt + '.txt" -c -t -U sa -P dalla' EXEC master..xp_cmdshell @sql
--WAITFOR DELAY '0:00:10'; DELETE FROM tempProducts
COMMIT TRANSACTION END DROP VIEW EXPORT_ORDERS GO
But Im sure it can be done in SSIS aswell, giving me some nice options for i.e. error handling aswell. Pointers please
I have a simple SSIS package that runs a query on the db and outputs a fixed width flat file. I have all my column widths defined and in the connection manager i can preview the output. Everything looks great. All the fields fall where they should and each record is on it's own line.
When i run the SSIS program and then go open my text file with a text editor the ouput is all on the same line. I have tried changing my file format from fixed width to ragging right and adding a row delimiter but that doesn't work either. I feel like i'm missing something small here. It could even be an issue w/ my text editor (although i've tried to open the text file in multiple editors). In the flat file connection manager I have my file defined to be 187 characters long, So figure every 187 characters it should output a new line (it should add the carraige return right?).
hi all... i want to store the output of an sql query as a text file.this is for my project i am doing in java.can u help me how to do this..it is very urgent
Hi, I am trying to import a excel file in to my database... The improt works fine.. But some of the data is missing though it is present in the excel spread sheet.
I have some data for cusip which are 9 characters and they be a combination of numbers wiht a letter.. for eg.. 123456789 or 12345R789. And in the my spread sheet there are around 73 rows.. until the 62 row it has numbers like 123456789 and from the 62 to 73 it has 12345R789 this is an just example but the data is in that format.
I went to sqlServer 2005 and imported the data using Tasks -ImportData and selected my excel spreadsheet, the user name and password for the database and i selected the sheet i want to import.. and when i preview the data ... Until the 62 row i can see the numbers and after that i cannot see any data in that column.... and when i import the data from 62 row the value is NULL...
So can some please tell me what going on why isnt that data been recognised by the importer in sql server.
Hi, I am trying to import a excel file in to my database... The improt works fine.. But some of the data is missing though it is present in the excel spread sheet.
I have some data for cusip which are 9 characters and they be a combination of numbers wiht a letter.. for eg.. 123456789 or 12345R789. And in the my spread sheet there are around 73 rows.. until the 62 row it has numbers like 123456789 and from the 62 to 73 it has 12345R789 this is an just example but the data is in that format.
I went to sqlServer 2005 and imported the data using Tasks -ImportData and selected my excel spreadsheet, the user name and password for the database and i selected the sheet i want to import.. and when i preview the data ... Until the 62 row i can see the numbers and after that i cannot see any data in that column.... and when i import the data from 62 row the value is NULL...
So can some please tell me what going on why isnt that data been recognised by the importer in sql server.
I am testing SSIS and have created a Flat File Destination. I defined the Flat File Connection as New for the first time and it worked fine. Now, I would like to go back and modify the Flat File Connection in the Flat File Destination Editor, but it allows only to create a New connection rather allowing me to edit the existing one. For testing, I can go back and create a new connection, but if my connection had 50-100 columns then it would be an issue to re-create it from scratch.
i have a weird situation here, i tried to load a unicode file with a flat file source component, one of file lines has data like any other line but also contains the character "ÿ" which i can't see or find it and replace it with empty string, the source component parses the line correctly but if there is a data type error in this line, the error output for that line gives me this character "ÿ" instead of the original line.
simply, the error output of flat file source component fail to get the original line when the line contains hidden "ÿ".
I have a situation where a tab limited text file is used to populate a sql server table.
The tab limited text file comes from a third party vendor. There are fixed number of columns we need to export to the sql server table. However the third party may add colums in the text file. Whenenver the text file has an added column (which we dont need to import) the build fails since the flat file connection manager does not create the metadata for it again. The problem goes away where I press the button "Reset Columns" since it builds the metadata then. Since we need to build the tables everyday we cannot automate it using SSIS because the metadata does not change automatically. Is there a way out in SSIS?
I m using SSIS and i am transfering the data from Flat File Source to the OLE DB destination File. The source file contain some corrupt data which i am transfering to the other Flat file destination file.
Debugging is succesful but i am not getting any error output in the Flat file destination file.
i had done exactly which is written in the msdn tutorial of SSIS.
Plz tell me why i am not getting the error output in the destination flat file?
First, a couple of important bits of information. Until last week, I had never touched SISS, and therefore, I know very little about it. I just never had the need to use it...until now. I was able to convert my first 3 flat files to SQL2005 tables by right clicking on "SISS Package" and choosing "SISS Import and Export Wizard". That is the extent of my knowledge! So please, please, please be patient with me and be as descriptive as possible.
I thought I could attach some sample files to this post, but it doesn't look like I can. I'll just paste the information below in two separate code boxes. The first code box is the flat file specifications and the second one is a sample single line flat file similar to what I'm dealing with (the real flat file is over 2 gigs).
My questions are below the sample files.
Code Snippet Record Length 400
Positions Length FieldName
Record Type 01 1,2 L=2 Record Type (Always "01") 3,12 L=10 Site Name 13,19 L=7 Account Number 20,29 L=10 Sub Account 30,35 L=6 Balance 36,37 L=1 Active 37,41 L=5 Filler Record Type 02 1,2 L=2 Record Type (Always "02") 3,4 L=2 State 5,30 L=26 Address 31,41 L=11 Filler Record Type 03 1,2 L=2 Record Type (Always "03") 3,6 L=4 Coder 7,20 L=14 Locator ID 21,22 L=2 Age 23,41 L=19 Filler Record Type 04 1,2 L=2 Record Type (Always "04") 3,9 L=7 Process 10,19 L=10 Client 20,26 L=6 DOB 26,41 L=16 Filler Record Type 05 1,2 L=2 Record Type (Always "05") 3,16 L=14 Guarantor 17,22 L=6 Guar Account 23,23 L=1 Active Guar **There can be multiple 05 records, one for each Guarantor on the account**
and the single line flat file...
Code Snippet 01Site1 12345 0000098765 Y 02NY1155 12th Street 03ELL 0522071678 29 04TestingSmith,Paul071678 05Smith, Jane 445978N 05Smith, Julie 445989N 05Smith, Jenny 445915N 01Site2 12346 0000098766 N 02MN615 Woodland Ct 04InfoJones,Chris 012001 01Site3 12347 0000098767 Y 02IN89 Jade Street 03OWB 6429051282 25 04Screen New,Katie 879500
As you can see, each entry could have any number of records and multiples of some of the record types, with one exception, every entry must have a "01" record and can only have one "01" record. Oh, and each record has a length of 400.
I need to get this information into a SQL 2005 database so I can create a front end for accessing the data. Originally, I wanted one line for each account and have null values listed for entries that don't have a specific record. Now that I've looked at the data again, that doesn't look like a good idea. I think a better way to do it would be to create 5 different tables, one for each record type. However, records 2 through 5 don't have anything I can make a primary key. So here are my questions...
Is it possible to make 5 tables from this one file, one table for each of the record types?
If so, can I copy the Account number in record 01, position 13-19 in each of the subsequent record types (that way I could link the tables as needed)?
Can this be done using the SISS Import and Export Wizard to create the package? If not, I'm going to need some very basic step by step instructions on how to create the package.
Is SISS the best way to do this conversion or is there another program that would be better to use? I know this is a huge question and I appreciate the help of anyone who boldly decides to help me! Thank you in advance and I welcome anyone's suggestions!
How can I take this example Flat file and parse out each section to a new flat file? Each section starts with HD (header row)
http://www.webfound.net/flat_file_example.txt
e.g. an example output file based on above (cutting out the first section) would be:
http://www.webfound.net/flatfile_output.txt
Also, I'll need to grab a certain value in each header row (certain position in the 100 byte header row) to use that as part of the filename that's outputed. I assume it would be better to insert these rows into a temp table then somehow do a search on a specific position in the row...but that's impossible? The other route is to insert each row into a temp table separated out by fields but that is going to be too combursome because we have several formats to determine separation of fields based on the row type so I'd have to create many temp tables and many components in SSIS when all we want to do is again:
1) output each group (broken by each header row) into it's own txt file
2) use a field in the header row as part of the name of the output txt file (e.g. look at the first row, whcih is a header row in flat_file_example. txt. I want to grab the text 'AR10' and use that as part of the filename that I create
Any suggestions on how to approach this whole process in SSIS...the simplest approach that will work ?
Hi I need a function which gets 3 parameters and input and returns 4 integers as output. I don't know how to return 4 integers as output any idea is appreciated.
Deaa group,I am using SQLServer 2000 in an XP Sp2. I would like to do thefollowing:I have a program running on a database server that generates some datawhich are loaded to the database. This program is used in a webapplication, invoked by some java program and JSP scripts. (I amfrontend illiterated.)The question is, is it possible to write a stored procedure to generateoutput in excel spreadsheet? So that user could call this procedureand get spreadsheet output on the client side.Any pointer to a solution would be immensely apprecaited.thanks,charia
I have a package in which there are only one Data flow Task and it has only three components. 1) Source , which is a SQL db 2) destination and 3) OLE DB Destination flat file Error output file. I want the error file to be created ONLY if there is any error while dumping the data into destination DB. But , the issue is, the error flat file is being created inspite of No error while dumping the data from Source to Destination.
Need to know how I can get the dynamic filename created in the FlatFile destination for insert into a package audit table?
Scenario: Have created a package that successfully outputs Dynamiclly named flat files { Format: C:Test’Comms_File_’ + ‘User::FileNumber’+’_’+Date +’.txt’
E.g.: Comms_File_1_20150724.txt, Comms_File_2_20150724.txt etc} using Foreach Loop Container :
* Enumerator Set to: “Foreach ADO Enumerator” with the ADO object source variable selected to identify how many total loop iterations there are i.e. Let’s say 4 thus 4 files to be created
*Variable Mappings : added the User::FileNumber – indicates which file number current loop iteration is i.e. 1,2,3,4
For the DataFlow task have a OLDBSource and a FlatFile Destination where Flat File ConnectionString is set up as:
I need find out the number of columns in flat file before i process that particular file.I have file name in @filename variable and file path is @filepath variable.But do not not that how i will check the column name in before i will process that file.
@filePath = C:DatabaseSourceFilesCAHCVSSourceFiles And i am using for each loop container to read the file one by one and put the file name in @filename variable.and my file name like
Now what i have to do is i need to make sure that ID,Name,City,County,Phone is there in flat file.if it is not there then i have to send mail to client saying that file is not valid.I need to also calculate the size of flat file.
What is the easiest way to accomplish this task with SSIS?
Basically I have a stored procedure that unions multiple queries between databases. I need to be able to export this to a text file on a daily basis and add a total records: row to the end of the text file.
