I've got a float data type in a table. I imported data from a csv file. One value was 0.5195, but when I use the value in a calculation or select it using the Query Analyser, I'm getting a value of 0.51949999999999996. Is there any way around this, it's a real pain?
Thanks in advance.
Hi All,
Am I missing something or is there something odd with float data types. i know that float is not the most precise definition but i came across something really odd today.
first let me define the scenario.
this is sql server 2005, standard edition build 3042.
I have a table defined as
CREATE TABLE [dbo].[ASSET](
[Property_Num] [numeric](10, 0) NOT NULL,
[Accrual_Factor_Val] [float] NULL
)
the accrual_factor_val was updated to a value of 0.00005 then the web service failed because the proc returned 5E-05!
i opened the table, and discovered this is the stored value. is this correct?
thoughts and ideas?
thanks for your input!
Hi,
I´m exporting an ms-excel file, then I use a lookup transformation to get a field from a SQL Server 2005 table. The Lookup transformation editor, after selecting the table, shows a warning that says:
at least one mapping between a column from available input columns ans a column from available lookup columns must be defined on the columns page.
So I try to make a relationship in the Lookup transformation editor's column tab where I find the Available input columns and the available lookup columns but I get the following error:
The following columns cannot be mapped:
[Department, DEP_CLEGALCODE]
One or more columns do not have supported data types, or their data types do not match.
The field in SLQ Server is varchar(10) and the input field is a derived column transformation; I have tried different Data Types but I always have the same error.
The DataFlow is: ExcelSource --> Derived Column --> Lookup --> Flat file destination
thanks.
I can't take full credit for this. I want to share this with Jeff Moden who did the important research for this calculation here.
All I did was just adapting some old code according to the mantissa finding Jeff made and optimized it a little
Some test codeDECLARE@SomeNumber FLOAT,
@BinFloat BINARY(8)
SELECT@SomeNumber = -185.6125,
@BinFloat = CAST(@SomeNumber AS BINARY(8))
SELECT@SomeNumber AS [Original],
CAST(@SomeNumber AS BINARY(8)) AS [Binary],
dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Converted],
@SomeNumber - dbo.fnBinaryFloat2Float(CAST(@SomeNumber AS BINARY(8))) AS [Error]
And here is the code for the function.CREATE FUNCTION dbo.fnBinaryFloat2Float
(
@BinaryFloat BINARY(8)
)
RETURNS FLOAT
AS
BEGIN
DECLARE@Part TINYINT,
@PartValue TINYINT,
@Mask TINYINT,
@Mantissa FLOAT,
@Exponent SMALLINT,
@Bit TINYINT,
@Ln2 FLOAT,
@BigValue BIGINT
SELECT@Part = 1,
@Mantissa = 1,
@Bit = 1,
@Ln2 = LOG(2),
@BigValue = CAST(@BinaryFloat AS BIGINT),
@Exponent = (@BigValue & 0x7ff0000000000000) / EXP(52 * @Ln2)
WHILE @Part <= 8
BEGIN
SELECT@Part = @Part + 1,
@PartValue = CAST(SUBSTRING(@BinaryFloat, @Part, 1) AS TINYINT),
@Mask =CASE WHEN @Part = 2 THEN 8 ELSE 128 END
WHILE @Mask > 0
BEGIN
IF @PartValue & @Mask > 0
SET @Mantissa = @Mantissa + EXP(-@Bit * @Ln2)
SELECT@Bit = @Bit + 1,
@Mask = @Mask / 2
END
END
RETURNSIGN(@BigValue) * @Mantissa * POWER(CAST(2 AS FLOAT), @Exponent - 1023)
END
Thanks again Jeff!
Peter Larsson
Helsingborg, Sweden
I am using SQL Server 7.0. I create a table with one field..type of float.
Using SQL Server Query Analyzer:
INSERT INTO MyTable(MyField) VALUES (4.9)
INSERT INTO MyTable(MyField) VALUES (Round(4.9,2))
SELECT * FROM MyTable
Result = 4.9000000000000004
This is a basic example of a problem I am having in another table with the
same float field that I am using to store money in. I don't want to use
the money field as the BDE from Borland has some issues with money fields.
Any suggestions? Thanks in advance.
We are using a GL package called Solomon. It uses SQL Server 7.0 for it's database. I want to create a data warehouse using this data as the source. The package uses the float data type for dollar amounts. The dollar amounts in the data have either no numbers, 1 number, or 2 numbers after the decimal point. Is the float data type the best one to use in my data warehouse for dollars and cents, or should I try using the monetary or decimal (precision 2) data type? Which type uses the most storage?
View 2 Replies View RelatedHi all,
I have declared a field with datatype as float.
When I enter value with two precision it chooses to round off to lower value and insert into the database.
I am losing precision in this case.
I want to insert 4.56. It inserts the way shown and hence all my further calculations go haywire.
Is SQL server designed to store float like this or Am I doing soemting wrong ???
Please advise...
4.56 (Inserted)
4.5599999999999996 (Stored)
I am using SQL Server 2000, VS 2003
I have Education table in which there is a field CGPA having float data type (null allowed) I retreive the data from SQL server using stroed proc and store it in SqlDataReader dr while reading if CGPA contains 0 then it raises an error that "Specified cast is not valid" other wise it does not raise any error.
while (dr.Read()){ Education e = new Education(); e.EducationId = dr.GetInt32(0); e.Country = dr.GetInt32(1); e.InstitutionName = dr.GetString(2); e.Grade = dr.GetString(3); e.CGPA = dr.GetFloat(4); // ERROR HERE e.Percentage = dr.GetFloat(5); e.PassingYear = dr.GetString(6);}
where as in Education CGPA is also the float property can any one tell me how to read 0 value of float from SQL server
Hai...
Hopefully ur guys can help me. I declare data type as float in price table. So the problem here is, whenever i enter a float number and move to the second row to enter a new number. The first number in the first row will automatically change to integer, without no reason. For example "2.3" will become "25".
Is there any configuration that need to do.
1. In c++ (or any other language) I'm copying bit by bit to a doublevariable dob_var.2. If I copy dob_var to dob_var2 which is also a double I do not loseinformation.3. This implies that the same would be when copying to a data base, butwhen I write dob_var to an sql server float field (same size as adouble variable = 64 bit) it sometimes loses information. e.g. whenvalue=1E-320.It is true that SQL float is valid until 1E-308 but so is a C++ double.Any comments?
View 2 Replies View Related
For example load 0.15 from Excel to varchar field in database and get 14.99999, why?
How just get 0.15 in varchar field?
Hello,
I am connecting to MSSQL through ODBC using regular SQL commands (SQLAllocHandle, SQLConnect, SQLFetch). Sometimes when I retrieve float data from the server it gets corrupted. For instance, instead of 59.457443 I will actually get 59.45744299999998. The value that is stored in the database is 59.457443 and it is stored as a float. The code I use to retrieve the data worked OK with an Access database, the problem only appeared after switching to MSSQL. Does anybody know if it's a configuration issue? Any help would be greatly appreciated.
EoF
Error converting data type varchar to float.
I am getting this error. Any one there to guide me
hello anyone... i got this message "Error converting data type varchar to float" when i was trying to insert values into table using instead of trigger...
below is my table ClimateData
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[ClimateData] Script Date: 03/26/2008 03:04:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[ClimateData] WITH CHECK ADD CONSTRAINT [FK_ClimateData_Photovoltaic] FOREIGN KEY([PV_application_id])
REFERENCES [dbo].[Photovoltaic] ([PV_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below is photovoltaic table
quote:USE [PVMC Database]
GO
/****** Object: Table [dbo].[Photovoltaic] Script Date: 03/26/2008 03:06:58 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
USE [PVMC Database]
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_OrganizationDetail] FOREIGN KEY([Org_application_id])
REFERENCES [dbo].[OrganizationDetail] ([Org_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
GO
ALTER TABLE [dbo].[Photovoltaic] WITH CHECK ADD CONSTRAINT [FK_Photovoltaic_Users] FOREIGN KEY([User_application_id])
REFERENCES [dbo].[Users] ([User_application_id])
ON UPDATE CASCADE
ON DELETE CASCADE
Below also my command for instead of trigger
quote:set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
go
CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Organization Detail already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Organization Types already in the table ***/
END -- trigger def
and finally, i hav tried using this command to insert into table v_PhotovoltaicClimateData.. this is the command to insert
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44, 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
and i got this error...
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
so anyone... plzz help me...
Hello everyone... i have some problem with instead of trigger... after insert values into v_PhotovoltaicClimateData, i got this error, Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
below is my DDL for Photovoltaic table
quote:CREATE TABLE [dbo].[Photovoltaic](
[PV_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_Photovoltaic_PV_application_id] DEFAULT (newid()),
[PV_site] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_state] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_type_of_system] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_nominal_power] [float] NULL,
[PV_module] [varchar](150) COLLATE Latin1_General_CI_AI NULL,
[PV_mounting] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_building_type] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_topology] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_new_or_retrofit] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_design] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_period_of_construction] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[PV_commissioning_date] [datetime] NULL CONSTRAINT [DF_Photovoltaic_PV_commissioning_date] DEFAULT (getdate()),
[PV_site_photo] [varbinary](max) NULL,
[PV_peak_nominal_rating] [float] NULL,
[User_application_id] [uniqueidentifier] NULL,
[Org_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_Photovoltaic_1] PRIMARY KEY CLUSTERED
(
[PV_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
Below is my DDL for ClimateData table
quote:CREATE TABLE [dbo].[ClimateData](
[Climate_application_id] [uniqueidentifier] NOT NULL CONSTRAINT [DF_ClimateData_Climate_application_id] DEFAULT (newid()),
[Latitude] [float] NULL,
[Longitude] [float] NULL,
[Altitude] [varchar](50) COLLATE Latin1_General_CI_AI NULL,
[Climate_type] [varchar](100) COLLATE Latin1_General_CI_AI NULL,
[PV_application_id] [uniqueidentifier] NULL,
CONSTRAINT [PK_ClimateData_1] PRIMARY KEY CLUSTERED
(
[Climate_application_id] ASC
)WITH (IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
below is my v_PhotovoltaicClimateData
quote:CREATE VIEW [dbo].[v_PhotovoltaicClimateData]
AS
SELECT dbo.Photovoltaic.PV_site, dbo.Photovoltaic.PV_state, dbo.Photovoltaic.PV_type_of_system, dbo.Photovoltaic.PV_nominal_power,
dbo.Photovoltaic.PV_module, dbo.Photovoltaic.PV_mounting, dbo.ClimateData.Latitude, dbo.ClimateData.Longitude, dbo.ClimateData.Altitude,
dbo.ClimateData.Climate_type
FROM dbo.ClimateData INNER JOIN
dbo.Photovoltaic ON dbo.ClimateData.PV_application_id = dbo.Photovoltaic.PV_application_id
below is my instead of trigger command...
quote:CREATE trigger [tr_v_PhotovoltaicClimateData] on [dbo].[v_PhotovoltaicClimateData] instead of insert as
BEGIN
insert Photovoltaic (PV_site, PV_state, PV_type_of_system, PV_nominal_power, PV_module,
PV_mounting)
select distinct inserted.PV_site, inserted.PV_state, inserted.PV_type_of_system,
inserted.PV_nominal_power, inserted.PV_module, inserted.PV_mounting
from inserted left join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
and inserted.PV_state = Photovoltaic.PV_state
and inserted.PV_type_of_system = Photovoltaic.PV_type_of_system
and inserted.PV_nominal_power = Photovoltaic.PV_nominal_power
and inserted.PV_nominal_power = Photovoltaic.PV_module
and inserted.PV_nominal_power = Photovoltaic.PV_mounting
where Photovoltaic.PV_site IS NULL /*** Exclude Photovoltaic already in the table ***/
insert ClimateData (Latitude, Longitude, Altitude, Climate_type, PV_application_id)
select distinct inserted.Latitude, inserted.Longitude, inserted.Altitude, inserted.Climate_type,
Photovoltaic.PV_application_id
from inserted inner join Photovoltaic on inserted.PV_site = Photovoltaic.PV_site
left join ClimateData on inserted.Latitude = ClimateData.Latitude
and inserted.Longitude = ClimateData.Longitude
and inserted.Altitude = ClimateData.Altitude
and inserted.Climate_type = ClimateData.Climate_type
where ClimateData.Latitude IS NULL /*** Exclude Climate Data already in the table ***/
END -- trigger def
this is my commad insert values using instead of trigger that i've created...
quote:insert into v_PhotovoltaicClimateData(PV_site, PV_state, PV_type_of_system, PV_nominal_power,
PV_module, PV_mounting, Latitude, Longitude, Altitude, Climate_type)
values ('CETDEM', 'Sequ Inspection', 'Cheras', 34.44 , 'ew', 'ewew',
34343.44, 323.32, 'ewew', 'ewewe')
after execute this commad, i got this error..
quote:Msg 8114, Level 16, State 5, Procedure tr_v_PhotovoltaicClimateData, Line 6
Error converting data type varchar to float.
what should i do??? anyone help me.
I have created a stored procedure that contain this field (below) inorder to meet certain criteria. But my problem is when I try to runthe stored procedure I encounter an error "Error converting data typevarchar to float".CASE Final WHEN 0 THEN '--' ELSE Final END AS FinalGradeThe Final field is a float data type.Could anyone teach me how to fix this problem?
View 1 Replies View RelatedI am trying to find a reference for a client that lists the fields available to be substituted into a data driven subscription from the query, along with the expected data types.  For example, the field on whether or not to include a link to the report seems to be expecting a bit data type.I have searched and can't seem to find anything.  I guess I could walk through the interface and try different data types, but if  a list exists, that would be better.Â
View 4 Replies View RelatedDoes anyone know of any cross-references between SQL Server data types and the new data types introduced with SQL Server Integration Services?
View 6 Replies View RelatedOne of my report has different data types like decimal,percentage and integer values.
When I exported the report to excel , all the values are showing as "general" data type.
How to get excel data type same as ssrs report data type by default when exported to excel?
I Have a table with #Sample like below
=================================
#Sample
id int,
SSN varchar(20),
State varchar(2)
Â
Sample Data:
ID SSN STATE
1 999-000-000 AB
2 979-000-000Â BC
3 995-000-000Â CD
=================================
We used filter logic based on the SSN & State.
We are passing these values through variables like
Declare @State varchar(2)
Declare @SSN varchar(20)
While run time these values are lets suppose @SSN = '999-000-000' & @State='ABC'
Now the Result is displayed with the state data Like 'AB' only.
Output: 1 999-000-000 AB
instead it should give system generated error.
Here I have 2 Questions:
1. Why it is taking 1st 2 Charecters?
2. Why it does not have any system generated for length?
I can do validation with Length function for these 2 variables however if have 100 variables then it should not feasible case. So, what is the reason behind?Â
I have an source file and i have to load it into the data base by changing datatype of the columns in ssis
View 1 Replies View RelatedHello,
I have a simple question. Is it at all possible to replace columns which has nulls with blank spaces for a float data type column.
The columns has null values( written)) in it in some rows and has numbers in other rows . I want to remove nulls before copying it to another file.
Thanks
In the following code I want to compare 2 values: AccessVal and SQLVal. The values are stored as nvarchars, so I'm isolating the numeric values in a subquery. Notice I'm only selecting 1 row. The commented line, where I compare the values, is throwing the error.
SELECT QA_AutoID, AccessVal, SQLVal
,ROUND(ABS(CONVERT(float, AccessVal,1)),0) as AccessFloat
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) as SQLFloat
FROM QA
WHERE QA_AutoID in (
SELECT TOP 1 QA_AutoID
FROM QA
WHERE ISNUMERIC(SQLVal) = 1 AND ISNUMERIC(AccessVal) = 1
)
--AND ROUND(ABS(CONVERT(float, AccessVal,1)),0) <> ROUND(ABS(CONVERT(float, SQLVal,1)),0)
ORDER BY ROUND(ABS(CONVERT(float, AccessVal,1)),0) DESC
,ROUND(ABS(CONVERT(float, SQLVal,1)),0) DESC
Here is the output with the comparison commented out...
Here's what I get with the comparison line activated:
I've tried converting to numeric, int and bigint instead of float. I've tried CAST instead of CONVERT. Nothing works.
I'm in the process of converting a rather huge VSAM database into a set of SQL tables.
I am using the same data names from the mainframe (like XDB-NAME to RDB-NAME).
I load the files using Import Export Data and it makes the tables with such column names as col001, col002, col003, etc... and always sets the data types to varchr(255).
And I have to cut and paste the data names from the manframe side to the server side (and the data types to.)
So, is there an easier way to do this? Or am I doomed to cut-n-paste my days away...
Thanks for any help.
Hi,
I can populate a dataTable with type double (C#) of say '1055.01' however when I save these to the CE3.5 database using a float(CE3.5) I lose the decimal portion. The 'offending' code is:
this.court0TableAdapter1.Update(this.mycourtsDataSet1.Court0);
this.mycourtsDataSet1.AcceptChanges();
this.court0TableAdapter1.Fill(this.mycourtsDataSet1.Court0);
This did not happen with VS2005/CE3.01.
I have tried changing all references to decimal (or money in CE3.5) without luck.
I'm beginning to think that string may be the way to go!!!!!!!
Can someone shed some light on my problem.
Thanks,
Later:
It's necessary to update the datatable adapter as the 3.01 and 3.5 CE are not compatible.
Hi,
I have a excel file which i want to import the data to sql server... The sql server Data type for that particular column is
varchar and it has a contraint too like the data should be in this fashion 00000-0000 or 00000...
but when i try to import the data from the excel to sql server... 08545 just becomes 8545 (cause excel is treating it as a float) and so my insert fails...
what can i do to rectify the problem...
regards
Karen
Hello,
I have a problem with the round of SQL Server 2K on the float data type.
In my application I do a SQL request for find a row in a table of SQL Server 2K.
This is the request :
SELECT DISTINCT N_ROW_ID FROM COMM WHERE N_ARTICLE_ID=79510 AND N_DATASOURCE_ID=1 AND N_SOURCE_ID=-102 AND N_PROVIDER_ID=-100
AND N_LEAD_TIME IS NULL AND N_UNIT_PRICE = 329.78 AND N_UNIT_PRICE_CURRENCY_ID=1
N_UNIT_PRICE is a float data type.
In the line need, the field N_UNIT_PRICE has 329.78 but with the round of SQL Server 2K I have 329.779999999999997.
So I never find the row
Do you have a solution for comparate a float flied with SQL Server round and a float send in a request as my 329.78?
I can't transform the column in decimal or numeric data type.
Is it possible to Disable the function?
Regards
SQL Server 2000, ASP.Net 1.1
I've been writing this stuff for a while, and can't seem to come to the
conclusion of how I should be retrieving data and assigning this data
to variables.
Since i'm using SQL Server, I'm convinced that I should be using the
datareaders GetSqlDouble (or whatever) function, but this would mean i
need my local variables to be one of the SQL types. The problem
with that is, that there will have to be lots of conversions done by me
to be able to use a SQL type in my application.
For instance, I have a class where i'm retrieving dates. In order
to retrieve them correctly (Null values included), I need to retrieve
them with GetSqlDateTime(), then when it comes time to display the date
in a table, i must first check for nulls, then convert to a
string. This seems to be very cumbersome. Would I be better
off just using GetDateTime(), and the .ToString method, and ignoring
Sql Types all together?
so, basically, how are you guys using your sql server data? with
the supplied sql types, and doing all of the post-processing work
manually? I feel like i'm having trouble conveying my
issue...hopefully someone knows what i mean....i'd just like some
direction to save trouble in the long run, since i feel like there's
got to be a better way...
Confused!
Thanks,
JJ
So I have two tables with similar columns etc, unfortunately the Insert to the History table fails. Noto sure how to format.
Source Table.
CREATE TABLE [dbo].[SKUCURRENT](
[UID] [int] IDENTITY(1,1) NOT NULL,
[SKU] [nvarchar](100) NOT NULL,
[WHSELOC] [nvarchar](50) NOT NULL,
[WEIGHT] [nvarchar](50) NOT NULL,
[Code] ....
Is it possible to easily copy data from one table to another if the data types don't match. I know you can do a INSERT INTO table1(col1,col2) SELECT (col2,col7) FROM table2 if the data types match but is there a way to do this if they don't. I'm not trying to copy date times into bit fields or anything. I just have an old table that I built when I really didn't know what I was doing now I at leastthink I have a better understanding of what data types to use, so I was wanting to move the data in the orignal table to my new one. Most of the fields in the olddatabase are text datatypes and the new database is nvarchar(50) data types. Thanks for any suggestions.
View 4 Replies View RelatedHello,
I have a really dumb question regarding SQL data types. I have a couple columns in a table that are specified as MONEY. These columns are being read from my web app and displayed on the website for reference when filling in other information.
My problem is that when it is displayed on the website it give four decimal places instead of two. For example I want it to report $33,000.29 but what is actually displayed is $33,000.2965.
How can I set up either SQL or my web app so that it only displays the two decimal places? I've looked into changing the datatype already but SMALLMONEY and MONEY have the same type of decimal values.
Thanks!
I am looking for a chart of SQL Server data types and information about them, such as usage, constraints, etc. Could anyone point me in the right direction?
Thanks
I'm just getting used to using SQL 7 Database and am looking for some recommendations on what DATA TYPES to use when designing tables.
The site I am working on now uses cold fusion to enter, update, and insert mainly text and articles. Now the problem with the articles is that some of them are pretty big. And when inserting or updating them, if they go over the limit of characters I get an error.
I know in access I used to use the data type "MEMO" and be able to put a large piece of info in that field.
What's the equivalent for SQL server databe?
What are the most used/common or recommended data types that should be used when putting tables together?
Thanks
George