Flustered... A Database With The Same Name Exists, Or Specified File Cannot Be Opened, Or It Is Located On UNC Share.
Dec 5, 2006
Hello everyone,
I have been playing with a Standard Version of VS 2005 and SSE 2005 and I just cannot get these two to interact together well. I am sure it is a noob problem but I have seen this error addressed on this forum and I am just not getting it. Here is exactly what I am doing.
I want to create a database within SSE using the Management Studio. Then, I want to connect to it with VS2005. Both SSE and VS2005 are local. I just cant seem to get this to work.
I always seem to get this error "An attempt to attach an auto-named database for file C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataSecond.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share."
One thing... I create the website with Location: HTTP. I don't even know anymore why I do this.. I think because I like to be able to pull up a browser and get to my app. Other than that I am doing nothing special. However, I get the above error when I hit F5 to run the app inside VS2005.
Is there someplace where a complete noob can find a thorough and simple covering of this? Again, I have read through some of the previous posts on this and I don't understand too many of them and it seems as if there are at least 13 causes of which I don't know which one I have. Help!
Thanks.
View 30 Replies
ADVERTISEMENT
Sep 2, 2007
Greetings, I have just arrived back into the country (NZ) and back into ASP.NET.
I am having trouble with the following:An attempt to attach an auto-named database for file (file location).../Database.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.
It has only begun since i decided i wanted to use IIS, I realise VWD comes with its own localhost, but since it is only temporary, i wanted a permanent shortcut on my desktop to link to my intranet page.
Anyone have any ideas why i am getting the above error? have searched many places on the internet and not getting any closer.
Cheers ~ J
View 3 Replies
View Related
Mar 24, 2006
I know allot of folks are having this problem and I tried lots of things but nothing works. I understand the problem is coping the SQL Express on another server is the problem - I just not sure what to do?
Version Information: Microsoft .NET Framework Version:2.0.50727.42; ASP.NET Version:2.0.50727.42
This is the last statement on the Stack Trace:
SqlException (0x80131904): An attempt to attach an auto-named database for file e:wwwdata81d0493fwwwApp_DataTestDatabase.mdf failed. A database with the same name exists, or specified file cannot be opened, or it is located on UNC share.]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +735091
I checked my server forum and they said I had to name a database:
Example: Database=(unique name);
But this didn't work either.
I just tried a simple web project that has only one database and one table in SQL Express with one sqldatasource and one datagrid. It works fine on my pc but when I use the copy function in Visio Studio 2005 Pro - I can't run the site on the remote server: www.myjewelrydirect.com
I tried coping the database manually. I tried disconnecting the database before I copy it. Below is my connection statement:
<connectionStrings>
<add name="TestDB" connectionString="Data Source=.SQLEXPRESS;AttachDbFilename=|DataDirectory|TestDatabase.mdf;Integrated Security=True;User Instance=True"
providerName="System.Data.SqlClient" />
</connectionStrings>
With all the comments in these forums - this must be a bug.
I have been working on this problem for over 2 weeks - HELP!
View 1 Replies
View Related
Jun 20, 2001
is there a way to find out what data file and object(table) resides on?
View 1 Replies
View Related
Apr 9, 2015
where the .tuf file is located in Logshipping ?
View 3 Replies
View Related
Feb 20, 2004
Hi all,
I want to create a database on a computer but datafile nad transaction log file located on the other computer.
please show me,
best regard.
View 2 Replies
View Related
Apr 2, 2007
hi
with my ssis-package i have to read several flatfiles. this files are stored in different folders on a unix machine. in my loop-task i have first a script, that checks whether the file exists. it does, so i set the path to a variable. in the connection-manager for the flat-file i have set source for the file to that variable. the bulk-insert-task starts, read the file and everithing is cool. but, sometimes, the package fails with this message:
[Bulk Insert Task] Error: An error occurred with the following error message:
"Cannot bulk load because the file "\Owpu0kas 0 0 5
eceivedw000005.090"
could not be opened. Operating system error code 53(error not found)."
i stop the degugging-mode, restart debuging and what happens? it runs ... maybe for the next one, two or three files and the error comes again, but never on the same file. i'm going crazy, what can i do?
thanks for your help.
View 3 Replies
View Related
Dec 26, 2007
Hi,
I have a package which is pulling data from a text file. The text file is located in different domain.
when I copy the text file manually to same domain where my sel server is located then Job is working fine.
How can I avoid this. Do we have any oher options ?
View 2 Replies
View Related
Jan 19, 2007
I'm exporting reports daily to a file share and I need to rename the reports with a pseudo time stamp.
Example: I have a report named "Disk Usage" and when I export (using a data-driven subscription) I want to rename it "Disk Usage - (Jan07)" - or something to that effect.
Can anybody tell me how to accomplish this.
View 1 Replies
View Related
Jun 21, 2007
I'am doing functionality test on DTS packages and saving my DTS packages to meta data services instead of saving them as local packages. We would like to see what information would be provided by saving them this way, but when we try to open the meta data browser (the 3rd icon under DTS) we get the following error:
An error occurred while trying to access the database information. The msdb database could not be opened.
View 3 Replies
View Related
Feb 7, 2012
I'm working on a SQL Server 2005 mirroring database test.The idea is to stop main DB server and activate the standby being mirrored (pretendng that principal DB Server is down)
Mirror works fine.
But for the test I do the following:
- Stop the principal SQLSERVER
- Connect to the standby server and execute the followng:
sqlcmd -S <IP> -d master -U opmirror -P xxxxx -Q "ALTER DATABASE DB_NAME SET PARTNER FORCE_SERVICE_ALLOW_DATA_LOSS;"
And it returns this error:
"Database 'DB_NAME' cannot be opened. It is in the middle of a restore"
Why can't the standby database be opened?
View 3 Replies
View Related
May 15, 2015
I am asked to create 100 procedures to a database. Any best way to create them in a database one by one by calling the files and saving the execution output files in a folder?
View 9 Replies
View Related
Apr 1, 2007
i have curputed mdf and ldf file for ms sql 2005
i have tried to put the db in standby mode and when i try to run dbcc checkdb or any other command i get this message
Database 'dbname' cannot be opened because its version (611) is later than the current server version (539).
but without standby mode i get this error
TITLE: Microsoft SQL Server Management Studio
------------------------------
Failed to retrieve data for this request. (Microsoft.SqlServer.SmoEnum)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&LinkId=20476
------------------------------
ADDITIONAL INFORMATION:
Could not find row in sysindexes for database ID 40, object ID 1, index ID 1. Run DBCC CHECKTABLE on sysindexes. (Microsoft SQL Server, Error: 602)
For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft+SQL+Server&EvtSrc=MSSQLServer&EvtID=602&LinkId=20476
------------------------------
BUTTONS:
OK
------------------------------
View 2 Replies
View Related
Jun 12, 2006
Hello,Could you explain me please the following error:"Database 'DemoDotNET' cannot be opened due to inaccessible files orinsufficient memory or disk space. (Microsoft SQL Server, Error: 945)"I have checked: free disk space is large enough, I have much enoughmemory, other files in the directory are accessible.Here is tail of ERRORLOG:2006-06-12 21:19:55.68 Logon Error: 18456, Severity: 14, State:16.2006-06-12 21:19:55.68 Logon Login failed for user 'PCRobert'.[CLIENT: <local machine>]2006-06-12 21:20:43.39 Server Server resumed execution afterbeing idle 1 seconds: user activity awakened the server. This is aninformational message only. No user action is required.Please help to solve this.Thank you./RAM/
View 3 Replies
View Related
Jun 6, 2006
Anyone help?
I opened SQL Server management studio and tried to connect with the local database and received the error message:
Database 'msdb' cannot be opened. It has been marked suspect.....
I have pasted the only error from the event log I could find below, but it doesn't mean much to me.
In the event I can't find what the problem is, and not being a database administrator, can anyone tell me what I can do to get back in working order without messing up all the databases in my SQL Server 2005. I'm afraid I only have a MASTER backup from several months ago, and am afraid if I use this, I will loose the latest data. I'm a novice, and do not understand the relationship of the master/msdb/model databases to my core custom databases. Can I do some sort of master rebuild without affecting the other databases I have?
I have tried sp_resetstatus but this didn't fix the problem, but it did enable me to actually connect to the SQL server instance so I could access all the other databases.
Many thanks
Gerard
Event log error detail:
The log scan number (152:284:1) passed to log scan in database 'msdb' is not valid. This error may indicate data corruption or that the log file (.ldf) does not match the data file (.mdf). If this error occurred during replication, re-create the publication. Otherwise, restore from backup if the problem results in a failure during startup.
View 19 Replies
View Related
Feb 14, 2008
I have a stored procedure that is located in one database and I would like to have it execute against a different database. My problem is when I go to execute it, it is still executing against the database it is stored in. Is it possible to tell this stored procedure when it runs to execute its code against this second database?
This is what I have now, which isn't working:
Code Snippet
use [Database2]
exec [Database1].[dbo].usp_SetupDatabaseUser
The end result still executes against Database1.
Thanks for any advice,
Flea#
View 9 Replies
View Related
Nov 13, 2015
Now I'm trying to implement logic to check if excel file is opened or not if open send out email in Script task. Using c#
I'm using this one but it's not working fine. always give me file is opened
public void Main()
{
Boolean FileLocked = true;
// Check if the file isn't locked by an other process
try
[Code] ....
View 4 Replies
View Related
Aug 24, 2007
hye everyone,
when i browse my web application the eror as below display..
what should i do..
any suggestion or tips...
"Cannot start your application. The workgroup information file is missing or opened exclusively by another user. Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.Data.OleDb.OleDbException: Cannot start your application. The workgroup information file is missing or opened exclusively by another user. "
thanks in advance..
thank you very much..
View 1 Replies
View Related
Jul 23, 2007
When I try the open the report file, I got the following error message. Database 'ReportServer$SQLExpressTempDB' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details. Anyony have ideas to fix this error?
View 3 Replies
View Related
May 17, 2008
I am creating a website. where the data to be stored in my server. I had my webspace from some service provider.
How can i connect the website and thee database.
--> website is deployed at webspace given by the provider.
--> database is at my server( located in our office).
****************How can i connect these website and database.*******************
View 3 Replies
View Related
Feb 25, 2007
Can someone please tell me what is meant by a file share?I'm doing a little reading on MS Sql Server and they talk about howyou can connect to the sql server through a named pipe.I'm guessing that a file share means a specific service running on aserver. Is this correct?The book says the following:When you connect to a file share you use a Universal Naming Conventionpath to a file server: \FILESERVERSharename.To connect to a named pipe, you connect to a share of the form:\COMPUTERpipesqlqueryThanks Hope you can clear this up for me.
View 2 Replies
View Related
May 7, 2008
Hi all,
I'm kinda new at programming, and am currently attempting to create a web application. I have an error when I try to insert information into a sql server database, and can't find how to fix it no matter how hard I try.
The error I get is: Cannot start your application. The workgroup information file is missing or opened exclusively by another user.
I have it so a user is logged in and is shown a form to fill out, then submits it (which creates an insert statement and sends it to the database).
My connection string is as follows:
CnnString = "Provider=Microsoft.Jet.OLEDB.4.0;" + "data source=serverdestination;" + "User id=user;" + "Password=pass;";
If you need any more information, just let me know.
Any help would be greatly appreciated!
View 2 Replies
View Related
Jan 23, 2007
I am facing a issue with bulk upload on Test Server.
Issue: When running Openrowset command from SQL server other that Test Server query runs fine when trying to run the same command from Test Server it gives error.
Msg 4861, Level 16, State 1, Line 1
Cannot bulk load because the file "\ServerNameinputFileName.csv" could not be opened. Operating system error code 5(Access is denied.).
For example: If the command is run from System A connecting to SQL Server instance on Test Server Test Server it gives this error. If the same command with same rights is run from any other SQL server instance say Dev1 its running fine.
If the command is run from Test Server connecting to any SQL Server instance including Test Server it is running fine.
Tried: 1) Given the read/write rights on shared folder, to user under which the SQL server service is running on Test Server
2) Given the read/write rights on shared folder to everyone.
Query:
SELECT DISTINCT * FROM OPENROWSET
(
BULK '\ServerNameinputFileName.csv',
FORMATFILE='\ServerNameFormat.xml'
)
AS FileList
Please provide me with some solution. What can be the reason for such behaviour?
View 22 Replies
View Related
Dec 15, 2014
I have a view saved on server - mhsvi-datawarehousedatawarehouse.This view, in it's TSQL connects to a databasethat is set up as a linked server. That server is mhsvi-sql2008ainstance1.When I try to add the view to Excel in order to automatically refresh for users as a report - I get the following error - (I get it as well)
The query did not run, or the database table could not be opened.Check the database server or contact your database administrator. Make sure the external database is available and hasn't been moved or reorganized, then try the operation again.I have access to the database where the view is saved and the database that the TSQL calls.
View 6 Replies
View Related
Dec 4, 2007
Hi All:
Can anyone point out what's wrong with the following script? I wanted to print all the LOGFILE names in all databases which are not in SIMPLE recovery model. Thanks in advance.
Jim
USE masterDECLARE @db_name nvarchar(100), @log_name nvarchar(100);DECLARE DB_Cursor CURSOR FORselect name from msdb.sys.databases where recovery_model_desc <> 'SIMPLE';OPEN DB_Cursor FETCH NEXT FROM DB_Cursor INTO @db_name WHILE @@FETCH_STATUS = 0 BEGIN USE @db_name -- Can I do this? GO select @log_name = name from sys.database_files where type_desc ='LOG'; print @log_name; ENDCLOSE DB_CursorDEALLOCATE DB_CursorI got the following error:Msg 102, Level 15, State 1, Line 13Incorrect syntax near '@db_name'.Msg 137, Level 15, State 1, Line 1Must declare the scalar variable "@log_name".Msg 137, Level 15, State 2, Line 2Must declare the scalar variable "@log_name".
View 3 Replies
View Related
Oct 6, 2015
I would like to know if is possible copy data from a database located in my hosting to my database located in my pc,but using a store procedure,how can i do that ?.What tool i have to use?
Sql server 2008
View 2 Replies
View Related
Aug 22, 2007
I'm trying to deliver a report via the included File Share Delivery method. Every time the subscription fires, the delivery fails with this error in the interface:
Failure writing file Test.pdf : A logon error occurred when attempting to access the file share. The user account or password is not valid.
An in ReportServerService<dateTime>.log, I find the following error:
ReportingServicesService!library!10!08/22/2007-16:17:08:: e ERROR: Throwing Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid., A logon error occurred when attempting to access the file share. The user account or password is not valid.;
Info: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
ReportingServicesService!subscription!10!08/22/2007-16:17:08:: Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider+NetworkErrorException: A logon error occurred when attempting to access the file share. The user account or password is not valid. ---> System.Runtime.InteropServices.COMException (0x8007052E): Logon failure: unknown user name or bad password. (Exception from HRESULT: 0x8007052E)
at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at RSRemoteRpcClient.RemoteLogon.GetRemoteImpToken(String pRPCEndpointName, Int32 type, Guid dataSourceId, String pUserName, String pDomain, String pPassword)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
--- End of inner exception stack trace ---
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.GetImpersonationToken(String userName, String domain, String userPwd)
at Microsoft.ReportingServices.FileShareDeliveryProvider.FileShareProvider.SaveReport(Notification notification, SubscriptionData d)
ReportingServicesService!subscription!10!08/22/2007-16:17:08:: i INFO: Error writing file Test.pdf to path \mrhowellSYSjunkjosh
I have tried using the <domain><user> username syntax. I have tried sending to multiple different machines. The only deployment that succeeded was to \localhostc$ est with administrator credentials entered into the Subscription (unacceptable, of course).
I've seen this issue raised on this forum at least twice, and neither was met with any ideas or answers. Has anyone encountered and overcome this issue?
View 9 Replies
View Related
May 26, 2006
Hello anyone / everyone,
If you are having trouble accessing Meta Data Services on W2k3 and SQL 2000 and get the error that the "msdb database could not be opened" I found that hot fix 912812 on the operating system is the culprit. Remove it and Meta Data goes back to working, although I am being asked to approve the ActiveX control every time the page refreshes.
Hope this helps somebody, to took me long enough to track it down.
If anyone has a resolution to the ActiveX question I'd love to know the answer.
Thank you,
Uncle Davy
View 5 Replies
View Related
Jan 12, 2015
I have the Image in FTP Server Folder and i need to insert that image into my local database.
How can i do this I tried with the below Query but i shows the errors as below.
--INSERT INTO AcademyStudents (ImageURL)
--SELECT BULKCOLUMN FROM OPENROWSET(BULK'https://iconic-solutions.net/OTA/test/images(1).jpeg',Single_Blob) AS BLOB
--Where StudentIdentificationNum = 2
--GO
GOt Error
;
Cannot bulk load because the file [URL] could not be opened. Operating system error code 123(The filename, directory name, or volume label syntax is incorrect.).
View 1 Replies
View Related
Mar 19, 2008
Has anyone written a RSS file that is used to add new Active Directory User/Group to SSRS, and applying security ROLES such as BROWSER?
I have new IT AD group that I need to apply to ALL folders on my PROD, QA and DEV servers. Way too many folders to do via SSMS or Web interface.
Would you be willing to share the RSS file?
View 1 Replies
View Related
Apr 9, 2008
When publishing to a file share using Reporting Services (no service pack 2 yet) the following error occurs:
Failure writing file NewFile.mhtml : An impersonation error occurred using the security context of the current user.
I have tried publishing to both Windows XP and Server 2000.
The Reporting Services box is Server 2003.
Publishing account is Local Administrator on both Reporting Services and target boxes.
Logon Locally has been granted on both Reporting Services and target boxes.
Any thoughts?
View 7 Replies
View Related
Jun 19, 2007
SQL Agent will not successfully execute my package as a job. Bids executes the package correctly as well as when I run the package manually (right click, run package) through SQL Server Management Studio. This is a permissions issue with the flat file any help will be much appreciated.Background Information:OS: SQL 2005 on Windows Server 2003Flat File Connection: \servernamefolderfile.txt (If I change the flat file location to a local file the package will run as a job successfully)Domain: The package is running on a Windows machine that is not on any domain. The network location is a Windows machine on a domain.Security: The network location folder (\servernamefolderfile.txt) has no security, namely anyone can access any file to read/write/delete/etc. I can manually add and delete files as well as add and delete files when the package runs through BIDS or when I manually run it through management studio.Permissions: I have created a login, security credential, and proxy which I am using to run the package. The security credential is tied to the Administrator account on the local machine.
Error Message: Executed as user: COMPUTER-NAMEAdministrator. Microsoft (R) SQL Server Execute Package Utility Version 9.00.3042.00 for 32-bit Copyright (C) Microsoft Corp 1984-2005. All rights reserved. Started: 12:05:37 PM Error: 2007-06-19 12:05:39.25 Code: 0xC001401E Source: DataTransfer Connection manager "FILECONNECTION.FileConnection" Description: The file name "\servernamefolderflatfile.txt" specified in the connection was not valid. End Error Error: 2007-06-19 12:05:39.25 Code: 0xC001401D Source: DataTransfer Description: Connection "FILECONNECTION.FileConnection" failed validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 12:05:37 PM Finished: 12:05:40 PM Elapsed: 2.297 seconds. The package execution failed. The step failed.
(note: I replaced the fileconnection strings with FILECONNECTION and the serverpath with "servernamefolder" for privacy reasons.
Any help would be greatly appreciated. This is some sort of security issue with SQL Agent. But, the error claims that the user is running as localmachineAdministrator. Isn't this how the package would run if I manually execute it?
View 3 Replies
View Related
Feb 22, 2007
Hi
In the "Choosing Between SQL Server 2005 Compact Edition and SQL Server 2005 Express Edition" white paper, i can read that: "SQL Server 2005 Compact Edition support data file storage on a network share" and "Number of concurrent connections = 256"
But when i try to connect with two different PC at the same time to a .sdf file store on a network share, i have an error message : "File is locked by an other processus"
The firsth PC is connected but the secondth can't
";Mode=Read Write" in the connection string don't change anything.
anybody have an idea ?
View 3 Replies
View Related