Food For Thought (ReIndex And Log Shipping)
Dec 29, 2003
I have a production 60GB database set to Full Recovery and every 15 minutes I am log shipping to a Stand by Server .
During the production hours there are no problems but at night when I run DBCC DBREINDEX, the log grows to 22GB and because of this I have a problem sending this over the network to the stand by server.
I tried changing the recovery model to Bulk_Logged but the there is no difference in log file backup size.
AnyIdea
View 1 Replies
ADVERTISEMENT
Apr 24, 2008
how will i start with a food handler data model?
thanks
View 2 Replies
View Related
Nov 21, 2005
SELECT e.LastName + ',' + e.FirstName + ' - ' + e.EmployeeID AS ListBoxText, e.EmployeeID, e.LastName + ',' + e.FirstName AS FullNameFROM Employee e INNER JOIN EmployeeEval ev ON ev.PeriodID = @Period WHERE (ev.Approved = 0) AND (e.DeptID = @deptID)GOI want to select everyone from the employee table in a dept (determined by DDL) who has either a) had a review and not been approved yet - or b) has not had a review yet ---- all employees are in the employee table -- and all reviews are placed in the employeeeval table.
View 4 Replies
View Related
Apr 8, 2008
So I've been working on this project and I've finally gotten into the program stages. However, I've realised some things that I need to change to some of my stored procedures so that they work the way I want them to inside the program. Anyways I have this stored procedure called "Delete_Minors" and what it originally did was delete any class found in this table called MinorRequiredClasses that matched that minor and was not considered complete. I realised that this would be a bad decision to delete classes in a minor and not consider any other majors/minors a user might have that also require those classes...SO I thought I might be able to come up with a query but it doesn't seem to work. Below are the tables the query/stored procedure deals with as well as the old procedure and the new one (that I attempted to work the way i wanted it to).
Code Snippet
DECLARE @studid int
DECLARE @minorid varchar(50)
SET @studid = 0
SET @minorid = 'Computer Science'
IF (SELECT COUNT(*) FROM Student_Minors sMinors WHERE sMinors.MinorID = @minorid AND sMinors.StudentID = @studid) > 0
BEGIN
DELETE FROM Student_Classes
WHERE StudentID = @studid AND Completed = 0
AND ClassID IN (SELECT minReqC.ClassID
FROM MinorRequiredClasses minReqC
WHERE minReqC.MinorID = @minorid)
AND ClassID NOT IN (SELECT majReqC.ClassID
FROM MajorRequiredClasses majReqC
WHERE majRecC.MajorDisciplineID IN (SELECT sMajors.MajorDisciplineID
FROM Student_Majors sMajors
WHERE sMajors.StudentID = @studid))
DELETE FROM Student_Minors
WHERE StudentID = @studid AND MinorID = @minorid
END
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[MinorRequiredClasses] Script Date: 04/07/2008 22:49:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MinorRequiredClasses](
[MinorClassID] [int] IDENTITY(0,1) NOT NULL,
[MinorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ClassID] [varchar](7) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_MinorRequiredClasses] PRIMARY KEY CLUSTERED
(
[MinorClassID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[MinorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MinorRequiredClasses_ClassID] FOREIGN KEY([ClassID])
REFERENCES [dbo].[Classes] ([ClassID])
GO
ALTER TABLE [dbo].[MinorRequiredClasses] CHECK CONSTRAINT [FK_MinorRequiredClasses_ClassID]
GO
ALTER TABLE [dbo].[MinorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MinorRequiredClasses_MinorName] FOREIGN KEY([MinorID])
REFERENCES [dbo].[Minors] ([MinorID])
GO
ALTER TABLE [dbo].[MinorRequiredClasses] CHECK CONSTRAINT [FK_MinorRequiredClasses_MinorName]
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[MinorRequiredClasses] Script Date: 04/07/2008 22:49:44 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MinorRequiredClasses](
[MinorClassID] [int] IDENTITY(0,1) NOT NULL,
[MinorID] [varchar](50) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
[ClassID] [varchar](7) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_MinorRequiredClasses] PRIMARY KEY CLUSTERED
(
[MinorClassID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[MinorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MinorRequiredClasses_ClassID] FOREIGN KEY([ClassID])
REFERENCES [dbo].[Classes] ([ClassID])
GO
ALTER TABLE [dbo].[MinorRequiredClasses] CHECK CONSTRAINT [FK_MinorRequiredClasses_ClassID]
GO
ALTER TABLE [dbo].[MinorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MinorRequiredClasses_MinorName] FOREIGN KEY([MinorID])
REFERENCES [dbo].[Minors] ([MinorID])
GO
ALTER TABLE [dbo].[MinorRequiredClasses] CHECK CONSTRAINT [FK_MinorRequiredClasses_MinorName]
USE [C:COLLEGE ACADEMIC TRACKERCOLLEGE ACADEMIC TRACKERCOLLEGE.MDF]
GO
/****** Object: Table [dbo].[MajorRequiredClasses] Script Date: 04/07/2008 22:50:36 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
SET ANSI_PADDING ON
GO
CREATE TABLE [dbo].[MajorRequiredClasses](
[MajorClassID] [int] IDENTITY(0,1) NOT NULL,
[MajorDisciplineID] [int] NULL,
[ClassID] [varchar](7) COLLATE SQL_Latin1_General_CP1_CI_AS NULL,
CONSTRAINT [PK_MajorRequiredClasses] PRIMARY KEY CLUSTERED
(
[MajorClassID] ASC
)WITH (PAD_INDEX = OFF, IGNORE_DUP_KEY = OFF) ON [PRIMARY]
) ON [PRIMARY]
GO
SET ANSI_PADDING OFF
GO
ALTER TABLE [dbo].[MajorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MajorRequiredClasses_ClassID] FOREIGN KEY([ClassID])
REFERENCES [dbo].[Classes] ([ClassID])
GO
ALTER TABLE [dbo].[MajorRequiredClasses] CHECK CONSTRAINT [FK_MajorRequiredClasses_ClassID]
GO
ALTER TABLE [dbo].[MajorRequiredClasses] WITH CHECK ADD CONSTRAINT [FK_MajorRequiredClasses_MajorDisciplineID] FOREIGN KEY([MajorDisciplineID])
REFERENCES [dbo].[MajorDisciplines] ([MajorDisciplineID])
GO
ALTER TABLE [dbo].[MajorRequiredClasses] CHECK CONSTRAINT [FK_MajorRequiredClasses_MajorDisciplineID]
OLD QUERY
DECLARE @studid int
DECLARE @minorid varchar(50)
SET @studid = 0
SET @minorid = "Computer Science"
DELETE FROM Student_Classes
WHERE StudentID = @studid AND Completed = 0
AND ClassID IN (SELECT minReqC.ClassID
FROM MinorRequiredClasses minReqC
WHERE minReqC.MinorID = @minorid)
NEW QUERY
DECLARE @studid int
DECLARE @minorid varchar(50)
SET @studid = 0
SET @minorid = 'Computer Science'
DELETE FROM Student_Classes
WHERE StudentID = @studid AND Completed = 0
AND ClassID IN (SELECT minReqC.ClassID
FROM MinorRequiredClasses minReqC
WHERE minReqC.MinorID = @minorid)
AND ClassID NOT IN (SELECT majReqC.ClassID
FROM MajorRequiredClasses majReqC
WHERE majRecC.MajorDisciplineID IN (SELECT sMajors.MajorDisciplineID
FROM Student_Majors sMajors
WHERE sMajors.StudentID = @studid))
Let me know if you need more information...Hope someone can help!
View 4 Replies
View Related
Jul 14, 2006
I had originally thought a full outer join would solve this, but alas I'm a roadblock. Perhaps it's because it's a Friday!
The goal is to create the most efficient query that will display results of the daily calls and sales as
this:
Date EmpID Calls Sales
7/1/2006 1 20 5
7/1/2006 2 25 7
7/1/2006 3 NULL 1
7/1/2006 4 10 NULL
The problem is a simple full outer join ends up ignoring EmpID 3 who has no Calls in t1, but I still want that row displayed in the results. Any ideas? TIA
create table t1 (Date smalldatetime, EmpID int, Calls int)
create table t2 (Date smalldatetime, EmpID int, Sales int)
insert into t1
values ('7/1/2006', 1, 20)
insert into t1
values ('7/1/2006', 2, 25)
insert into t1
values ('7/1/2006', 4, 10)
insert into t2
values ('7/1/2006', 1, 5)
insert into t2
values ('7/1/2006', 2, 7)
insert into t2
values ('7/1/2006', 3, 1)
View 5 Replies
View Related
Feb 3, 2004
I have a hunch this one is going to be a resounding "no", but I thought I'd try anyways.
I have a report that uses a user defined date range many, many times throughout the datasource. Ideally, I would like to pass a query declaring and setting variables and let sql server (2000) sort out the dirty work. Essentially I'm working on something that would look like this:
DECLARE @sDate AS DATETIME
DECLARE @eDate AS DATETIME
SET @sDate = 'this string gets constructed during the On Open event of a report
SET @eDate = 'same thing here
SELECT lotsOfStuff, (SELECT oneOfManySubSelects FROM t2 WHERE t2.field BETWEEN @sDate AND @eDate)
FROM somewhere
WHERE somefield BETWEEN @sDate AND @eDate
I have some five subselects that are dependent on this daterange. I can construct the entire string purely in VB, but it's messy and rather tedious. Ideally I'd like to set the variable ONCE at runtime and be done with it. This way, I keep a full record source that calls @sDate and @eDate. Then I simply set the variables and insert them before the query.
The problem is Access doesn't seem to know how to pass the query without trying to parse the variables itself. So it gets mad that @sDate and @eDate haven't been defined for each occurance. I'm looking for a way to make access ignore the fact that there are variables in the query, and pass it as-is to the sql server.
Thoughts?
View 3 Replies
View Related
Feb 7, 2004
HI FRIENDS,
IS THERE ANY PERFORMANCE IMPACT WHEN I USE "CHAR" AS A DATA TYPE INSTEAD OF USING "INT" FOR RETRIEVING DATA OR FOR SOME COMPLEX QUERY.
THANKS
WITH BEST REGARDS,
DHIRAJ
View 3 Replies
View Related
Oct 6, 2006
I assume that MS has a directive never to change the format of SSIS raw files...
However, what I'd like to know is that when I'm planning long-term systems where I've got backups of data (staging, logging, whatever) using raw files, can I be assured that future versions of SSIS will be able to read those raw files?
I assume a certain level of backwards compatibility, however, I'm just curious if I should think about building processes into my projects that would factor that in and rebuild raw files everytime a new/major release of SSIS comes out.
Phil
View 5 Replies
View Related
Nov 15, 2007
So, Jimmy G helped me out with it in showing a little bit how to do it. SqlCommand command = new SqlCommand(, object>)
SqlParameter param = new SqlParameter();
param.ParameterName = "@return";
param.Direction = ParameterDirection.ReturnValue;
command.Parameters.Add(param);
command.ExecuteNonQuery();
//get the return value
int val = int.Parse(command.Parameters[0].ToString());
Where I get lost is in the declaring of a new sqlcommand and sqlparameter. Can you please spell out where to use this and if I need to change my SQLdataSource. I currently was trying to use it in the OnClick of a button. What I had did the following
Protected Sub CreateIssue_Click(ByVal sender As Object, ByVal e As System.EventArgs) dim returnValue as integer 'how do I get a return value from the stored procedure executed in 'insertissue.insert() here to a variable? InsertIssue.Insert() Response.Redirect("/addarticletoissue") End Sub
again, thank you for your help and patience with such a beginner =)
View 2 Replies
View Related
Sep 11, 2007
Two tables:FruitfruitID, fruitNameBasketbuyerID, fruitID(ie. we can see which buyer has what fruit in their basket)I simply want to display all available fruit and whether or not it'sin a specific persons' basket.SELECT Fruit.fruitID, Fruit.fruitName, IsNull(buyerID, 0)FROM Fruit INNER JOIN Basket ON Fruit.fruitID = Basket.fruitIDWHERE Basket.buyerID = 12but this just gives me what's in buyer 12s' basket.What am I doing wrong? Am I a basket case...
View 2 Replies
View Related
Jul 20, 2005
It is my understanding that Views cannot have parameters. Also thatstored procedures can not be queried. My problem is this:I want to select the rows that match a certain parameter.From that I want to select the most current 20 rows (there is a datefield).From that I want to select the lowest 10 rows based on a numericfield.Finally I want that to be input to a report and some calculations.What this basically is the selection for USGA Golf Handicap Index. Itis the most current 20 rounds of golf by a golfer, then the best 10 ofthose 20 and then finally the calculation.Any help would be appreciated.
View 3 Replies
View Related
Oct 22, 2007
Hi
I have a table which has the column [itemNumber] Which contains numbers from 000 to 999. I have another table which has the UPC data for given items
I am trying to get results from my query that will show me every number in the itemNumberSet table that does not already exist (in the substring) of the UPCcode column.
By using the query below i am able to retrieve the opposite, and it works by returning results that do exist in the UPCcode column. But I cannot seem to get it to do the opposite which is what i am after. I figured it would be as simple as using NOT IN but that returned 0 results.
SELECT itemNumber FROM itemNumberSet
WHERE itemNumber IN (select SUBSTRING(UPCcode, 9, 3) FROM itemUPCtable)
ORDER BY itemNumber
Thanks for any suggestions you might have.
J
View 3 Replies
View Related
May 13, 2007
Hi
I could not able to find Forums in regards to 'Log Shipping' thats why posting this question in here. Appriciate if someone can provide me answers depends on their experience.
Can we switch database recovery model when log shipping is turned on ?
We want to switch from Full Recovery to Bulk Logged Recovery to make sure Bulk Insert operations during the after hours load process will have some performance gain.
Is there any possibility of loosing data ?
Thanks
View 1 Replies
View Related
Feb 19, 2002
Hi guys.
I an application here developed by a third party software house.
In the past, for some reason, the database would fail daily. The software
house recommended that we use dbcc reindex on all tables within the
databases twice daily. This was scheduled and is now running. Now the
database no longer fails.
The fix works and I don't understand why.
I don't understand why this would fix the problem. Why would reindex
twice daily solve the problem.
It seems excessive to have to reindex every user table twice daily.
Parg
View 1 Replies
View Related
Apr 26, 2001
I tried to run dbcc reindex on all user tables in a database. There are no
clustered indexes, but multiple non-clustered indexes on each table.
The output file from dbcc reindex shows that it should have worked. But when I
run DBCC SHOWCONTIG, the scan density of the indexes that were in bad shape did
not improve.
Any ideas?
Thanks,
Ben Reeder
.
View 1 Replies
View Related
Sep 25, 2002
Hello everybody.
1. I have 28 Gig database with 4 tables above 4 Gig each with very bad
fragmenataion, each table has between 3 and 5 indexes
2. Database set for full recovery and I use custom log Shipping to restore
db on stand by server every 15 min.
I tried to run DBCC INDEXDEFRAG on one index on 4Gig table .
following took place
1. It took 4 hrs to complite DBCC INDEXDEFRAG
2. log shipping fail.
3. log file size of 2 Gig generated after DBCC INDEXDEFRAG complited
I tried to run drop and create clustered index on table it create same
problem - log growing, log shipping fails
(if log shipping fails and stand by database get suspended it will take 6- 8
hrs to restore it from backup and apply all logs)
So my question is
What would be best way to rebuild- reindex - defragment 28 Gig database
when it set to fully recovery and log shipping
Thank you
Alex
View 1 Replies
View Related
Apr 16, 2002
Hi guys,
I need a help with this question. In SQL 2000, Can i run update,insert or delete queries while the Indexes of that table is being Rebuilt? Will
i get blocked by the DBCC DBreindex process?
thank you
View 1 Replies
View Related
May 1, 2008
I have a process that runs each day and it imports about 550K records into a database. My questions is it appears I have to reindex the database after each import otherwise the sp's that I have written will just run and run and run. After the reindex job things run within 60 seconds. I am just looking for some insight on why, I understand why a reindex is done, but dont know if I understand why I have to reindex every time.
View 9 Replies
View Related
Jul 12, 2007
Hi experts, I would like to ask for this error that occurs upon executing my reindexing script
here is my script
USE mydatabase
DBCC DBREINDEX('outpatient', '', 70)
go
Then this error message will appear. I researched for this error and from the site that I've found they say that the table is corrupted? That I need to restore a better backup..?
The statement has been terminated.
Msg 824, Level 24, State 2, Line 1
SQL Server detected a logical consistency-based I/O error: torn page (expected signature: 0x55555555; actual signature: 0x55555545). It occurred during a read of page (1:353409) in database ID 10 at offset 0x000000ac902000 in file 'C:Program FilesMicrosoft SQL ServerMSSQL.1MSSQLDataBizbox_HS7.mdf'. Additional messages in the SQL Server error log or system event log may provide more detail. This is a severe error condition that threatens database integrity and must be corrected immediately. Complete a full database consistency check (DBCC CHECKDB). This error can be caused by many factors; for more information, see SQL Server Books Online.
Darren Bernabe Blanco
View 4 Replies
View Related
Jul 18, 2007
how often should be done and if it don't do it what will happen?
=============================
http://www.sqlserverstudy.com
View 1 Replies
View Related
Oct 21, 2007
I#ve been doing disaster recovery on a web box that died today.
So I thought I'd do some "downtime" maintenance on the DB server
I ran a BDREINDEX on all tables, all indexes. (I know this is the 2000 way, but I assume its as good as the proper 2005 way??).
5 minutes on a 10GB database. Not bad!
I checked the DEFRAG and UPDATE STATS processes that run overnight.
They are basically defragging only tables with SHOWCONTIG indicating fragmentation. And then doing an UPDATE STATISTICS WITH FULLSCAN on all tables
That is taking an average of 30 minutes ...
Is DBREINDEX the equivalent of an UPDATE STATISTICS WITH FULLSCAN, or is it in some way a smaller-sample version?
I'm wondering why I don't just lock the DB and do a REINDEX of everything in 5 minutes ...
Kristen
View 4 Replies
View Related
Sep 27, 2006
Hi,i have several tables in production whose contents are renewd totally in 1week. So everyd day we delete ~15% records and then insert 15% new.And after a few days, the performances drops :TABLE level scan performed.- Pages Scanned................................: 169617- Extents Scanned..............................: 21630- Extent Switches..............................: 153827- Avg. Pages per Extent........................: 7.8- Scan Density [Best Count:Actual Count].......: 13.78% [21203:153828]- Logical Scan Fragmentation ..................: 45.06%- Extent Scan Fragmentation ...................: 52.66%- Avg. Bytes Free per Page.....................: 5042.5- Avg. Page Density (full).....................: 37.70%I can't program a dbcc reindex every day because of concurrent access (itlocks the tables too long), actually i can only program it on sunday.What else can i do ? I can adjust the fill factor but how to find the goodvalue if i don't want to waste space.The total size of the database is ~150GB.Thx
View 1 Replies
View Related
Oct 2, 2001
I am currently running the Back Office Resource Kit Log shipping option for a database running on an SQL 7 installation. As part of the on-going maintenance work that we are being asked to perform by the application vendor I need to run a DBCC REINDEX run on most of the tables in the database. Currently this is done by stopping the log shipping routine and then running the reindex script, then taking a full backup and restoring the backup to the secondary server then restarting the log shipping scripts. This is a very time consuming task that has to be performed at unsociable hours.
Has anybody got an opinion as to if this would work at the same time as the log shipping scripts or do I have to continue as at present.
Responses gratefully received.
Regards
Phil Corby
Geest IT Services
View 3 Replies
View Related
Dec 14, 1999
I am maintaining a large table with millions of rows that has two non clustered indexes and data changing frequently, I need to keep the indexes fresh. Update Statistics runs much quicker than Reindex. What is the appropriate situation for each and why?
Thanks in advance.
View 1 Replies
View Related
Nov 29, 2007
All,
I first ran indexdefrag on a table with 1.5 billion rows.
logical fragmentation was at 95%.
logical frag went down to 3% with no real effect on disk.
DBCC reindex had previously been bombing undetected.
Now I've run a reindex on this table:
Reindex Job with Fillfactor =100
Ran in 3:05
Free Disk went from ~150GB before operation to 49GB
File4 went from 347GB to 504GB
Why has so much free disk been consumed by this operation and not released ??????????
Is my only choice to shrink data file???
thanks
Env.
Win2k ENT os
SQL 2k5 std 64bit
View 4 Replies
View Related
Jun 19, 2008
Dear All,
is it ok to run index rebuild script on publisher and after that in subscriber? what are the steps i need to take to do this?
will it affect the replication? please help me here.
Arnav
Even you learn 1%, Learn it with 100% confidence.
View 3 Replies
View Related
Jun 26, 2006
Hi Folks,SQL Server 2000 SP3 on Windows 2000. I have a database on which I ranthe command :dbcc dbreindex ('tablename')gofor all tables in the database. Then I compared the dbcc showcontigwith all_index output from before and after the reindex and on thelargest table in the database I found this. First output is prior toreindex:Table: 'PlannedTransferArchive' (1975014117); index ID: 1, database ID:7TABLE level scan performed.- Pages Scanned................................: 184867- Extents Scanned..............................: 23203- Extent Switches..............................: 23324- Avg. Pages per Extent........................: 8.0- Scan Density [Best Count:Actual Count].......: 99.07% [23109:23325]- Logical Scan Fragmentation ..................: 11.13%- Extent Scan Fragmentation ...................: 35.46%- Avg. Bytes Free per Page.....................: 60.0- Avg. Page Density (full).....................: 99.26%Second output is from after the reindex:DBCC SHOWCONTIG scanning 'PlannedTransferArchive' table...Table: 'PlannedTransferArchive' (1975014117); index ID: 1, database ID:8TABLE level scan performed.- Pages Scanned................................: 303177- Extents Scanned..............................: 37964- Extent Switches..............................: 42579- Avg. Pages per Extent........................: 8.0- Scan Density [Best Count:Actual Count].......: 89.00% [37898:42580]- Logical Scan Fragmentation ..................: 43.19%- Extent Scan Fragmentation ...................: 24.78%- Avg. Bytes Free per Page.....................: 75.1- Avg. Page Density (full).....................: 99.07%Following are my concerns:The following numbers are all higher after reindex than before reindex:pages scanned, extent switches, logical scan fragmentation, avg bytesfree per page, avg page density.scan density is lower after reindex than before reindexSeems to me that the numbers that are higher after reindex should belower and numbers that are lower after reindex should be higher? Ididn't specify the fill factor in the dbcc reindex command so it shouldhave used the default fill factor. The fill factor has never beenchanged on this machine.Am I missing something?Thanks,Raziq.*** Sent via Developersdex http://www.developersdex.com ***
View 3 Replies
View Related
Feb 3, 2000
Does running DBCCReindex update the space allocated columns in sysindexes? I understand that running dbcc updateusage updates the space allocated columns in the sysindexes table. But, I cannot find any documentation that indicates whether dynamically rebuilding the indexes as opposed to drop and recreating the indexes updates the space allocated columns in the sysindexes table?
Any information would be helpful.
Thanks.
Gail Wade
Database Administration
Raymond James Financial
gwade@it.rjf.com
View 3 Replies
View Related
Apr 22, 2004
I have a standard reorganise/reindex job running against a 32GB database on SQl Srever 2000. When trying to run the job it fails and returns Error 1105 <'PRIMARY' filegroup is full>. What's confusing me is that I have 53GB free on the drive on which my Primary file group sits.
Has anyone else come accross this problem when trying to set up a regular reindex job?
(more detail) the maintenance plan only includes the reorganisation/reindex job, no other jobs - including backing up the DB - are included. The DB in question is the only DB on the server: it's a test server.
View 2 Replies
View Related
Feb 22, 2015
I'm trying to understand what is happening to one large table.
In a DB SQL 2008R2, I'm trying to track a rapidly increasing DB size. It's due to one table recently added.
Despite the table's no rows increasing its size reduces after a scheduled re-index.
I've recorded the space used by this table by recording EXEC sp_spaceused 'tableName'
---
NoRows reserved data index_size unused
128864512300384 KB 2290928 KB9432 KB24 KB AFTER reindex
128864515406232 KB 5366184 KB39280 KB768 KBBEFORE reindex
N.B. The only thing I'm aware of happening in the time period is a reindex as part of scheduled task. I could be missing something else happening.
The table has only one Index the PK which is clustered, No Fill factor is specified. The Server Default fill factor =0.
I read fillfactor=0=100 Will always try and fill the pages so space used will be minimised?
After running the reindex the index fragmentation is v.low. I've not recorded the fragmentation before reindex.
I can see the Data is not added in Clustered index order.
View 2 Replies
View Related
May 18, 2015
I have a weekly Maintenance Plan Reindex job that has failed because of a deadlock. My question seems simple enough and I'm ashamed to say I ought to know this answer, but here goes: Does the rest of a given job continue after such failures (this one was maybe 3/4 through the log) occur?
View 6 Replies
View Related
Jun 8, 2006
Hi,
I 'm sure I am missing something obvious, hopefully someone could point it out. After a failover log shipping, I want to fail back to my inital Primary server database; however, my database is marked as loading. How can I mark it as normal?
I did the failover as follow:
I did a failover log shipping from the 2 server Sv1 (Primary) and Sv2 (Secondary) by doing the following
1) Stop the primary database by using sp_change_primary_role (Sv1)
2) Change the 2nd server to primary server by running sp_change_secondary_role (Sv2)
3) Change the monitor role by running sp-change_monitor_role (Sv2)
4) Resolve the log ins - (Sv2)
5) Now I want to fail back - I copy the TRN files to Sv1 - use SQL Ent to restore the database at point in time. The task is done; however, the database is still mark as loading. I could not use sp_dboption.
I appreciate any suggestion.
Thanks in advance
View 5 Replies
View Related
Jan 18, 2006
Does anyone know what the commands would be? I am trying to create a job that puts a DB in simple mode then launches a reorg and re-index, then sets it back to full when it is complete. This way I can eliminate large transaction logs being created.
Any help would be great!
Thanks
View 1 Replies
View Related
