Hi,
Recently I installed MSDE and then Analysis services and also applied SP3's for both...
However I have noticed that the FoodMart Database which was automatically installed previously with Analysis services is not installed. Is there any way to get that?
Many TIA.
Hi,
I am busy going through the Microsoft official curriculum for 'Designing and Implementing OLAP solutions' and the online tutorial.
Is Foodmart 2000 an OLTP, datamart or data warehouse?
I just think I am missing an important part in creating the Fact Table. This seems like the more important task when creating cubes. Would this be covered in a data warehousing module?
When is this created and where can I get some documentation about creating it. I just dont think it is part of a normal relational database design or development.
Any help?
Regards
Ian
If Everything Seems To Be Going Well, You Have Obviously Overlooked Something.
Hi i have a sorted procedure that create a @temp table that return strNomObjet,strNomDescripteur,strReponse,Percentage
I need to calculate the Percentage for strReponse for each strNomDescripteur. strReponse can be = to A,B,C, or D
To calculate the Percentage i have no problem my is that something it possible that a certain strNomDescripteur that will have only A,B and D and there no C i need to put 0%.
Here what i have
DECLARE @Temp table
(
strLastName varchar(50),
strFirstName varchar(50),
strReponse char(10),
strNomObjet nvarchar(200),
strDescripteurOrdre char(10),
strNomDescripteur nvarchar(200),
strObjetOrdre char(10)
)
INSERT INTO @Temp
Select te.stdlastn,te.stdfirstn,COALESCE(NULLIF(REPLACE(tr.T3,'*',''),' '),REPLACE(tr.T2,'*','')),tob.Nom,tob.Affichage,td.Nom,td.Affichage
fromBulletin.dbo.tblEleves as te
INNER JOIN Bulletin.dbo.tblBulletin as tb ON te.stdnumber=tb.NoEtud
INNER JOIN Bulletin.dbo.tblNomBull as tnb ON tb.NoBull=tnb.ID
INNER JOIN Bulletin.dbo.tblSection as ts ON ts.ID_Bull = tnb.ID
INNER JOIN Bulletin.dbo.tblObjetas tob ON tob.ID_Sec = ts.ID
INNER JOIN Bulletin.dbo.tblDescripteur as td ON td.ID_Obj = tob.ID
INNER JOIN Bulletin.dbo.tblReponse as tr ON tr.ID = tb.ID
whereintActif = 1 and
tb.NoBull not like '%EdPhy%'
and tnb.Nom not like '%EdPhy%'
and tnb.Date = '2006-2007'
and te.STDGRADeID = 3
and te.schoolid = '1202'
and ts.Nom = 'MATHÉMATIQUES'
and tr.[Desc] = td.ID
and tr.T2 <> 'NULL'
and tr.T3 <> 'NULL'
and (tr.T2 <> '' OR tr.T3 <> '')
ORDER BY tob.Affichage,td.Affichage
SELECT t1.strNomObjet,t1.strNomDescripteur,t1.strReponse,
t1.ReponseCount * 100.0/t2.PersonCount AS Percentage
FROM
(
SELECT strNomObjet,strNomDescripteur,strReponse,count(*) AS ReponseCount FROM @Temp
GROUP BY strNomObjet,strNomDescripteur,strReponse)t1
INNER JOIN (SELECT strNomObjet,strNomDescripteur,count(*) AS PersonCount FROM @Temp
GROUP BY strNomObjet,strNomDescripteur)t2
ON t2.strNomObjet=t1.strNomObjet
AND t2.strNomDescripteur=t1.strNomDescripteur
This will give this result :
As you can see it always A,B,C,D A,B,C,D
Except for "FORMES utilise les transformations géométriques pour" it only A,B,C there no D.
So is there a way that i could insert D = 0
So if i don't find any A,B,C or D for certain strNomDescripteur put that letter = 0
Thanks for your help in advance!!
FORMES utilise la mesure pour résoudre des problèmesA 47.222222222222
FORMES utilise la mesure pour résoudre des problèmesB 38.888888888888
FORMES utilise la mesure pour résoudre des problèmesC 8.333333333333
FORMES utilise la mesure pour résoudre des problèmesD 5.555555555555
FORMES utilise les figures géométriques pour résoudre A 61.111111111111
FORMES utilise les figures géométriques pour résoudre B 25.000000000000
FORMES utilise les figures géométriques pour résoudre C 11.111111111111
FORMES utilise les figures géométriques pour résoudre D 2.777777777777
FORMES utilise les transformations géométriques pour A 62.857142857142
FORMES utilise les transformations géométriques pour B 28.571428571428
FORMES ET ESPACE (géométrie)utilise les transformatC 8.571428571428
NOMBRE ET OPÉRATIONSdémontre une compréhension A 69.444444444444
NOMBRE ET OPÉRATIONSdémontre une compréhension B 16.666666666666
NOMBRE ET OPÉRATIONSdémontre une compréhension C 5.555555555555
NOMBRE ET OPÉRATIONSdémontre une compréhension D 8.333333333333
Hello all,I hope someone can help me; if got a value in a cell (040 1234567),when I run a queryin the Analyser I got as respons only 40 1234567, so missing the zero(0) not the whole number is displayed. When I run a query on a cellwith value 1234567 I received the number 1234567 and that's oke. TheData Type of the Column is Char.Thanks,Marko
View 6 Replies View RelatedWhy is is in SSMSE or through code in VB.NET when running a query on a linked server that is an Excel spreadsheet is the first row not returned?
My spreadsheet has 320 rows with no column headings.
My select query within SSMSE returns only 319, the first row is ommitted, I beleive treated as a column heading.
If I insert a row at the very beginnning and enter any jibberish this row is ommitted and I get all my data.
Now I dont really want to have to tell my users that to get the import function of my app to work correctly they have to do this?
Is there a way to configure it to not treat first row as headings?
Thanks
When I log in to Windows (XP Pro SP2), I get the following message displayed in the Application Event Viewer.
"The ASP.NET DLL (Path: C:WINDOWSMicrosoft.NETFrameworkv2.0.40607aspnet_isapi.dll) (Version:2.0.40607.0) is missing"
The message is quite correct in its assertion that the file is not where it says it is. There is a copy of the noted DLL however, in C:WINDOWSMicrosoft.NETFrameworkv2.0.50727 and in C:WINDOWSMicrosoft.NETFrameworkv1.1.4322
Why is the Report Server looking for that particular version? Why can't it point at the later version?
I'm trying to access some files on a file server in CLR code and I have to impersonate the windows login to get permission. I am using the classic example of SqlContext and i can see that after calling the impersonate method it changes. I always get false from the System.IO Direcotry and File functions to see if there are any files or even if the directory exists. The permissions are correct on the file share and the batch submission is using the correct login.
Directory.Exists ALWAYS returns false.
Slimmed down code
WindowsImpersonationContext OriginalContext = null;
WindowsIdentity CallerIdentiy = SqlContext.WindowsIdentity;
try
{
OriginalContext = CallerIdentiy.Impersonate();
bDirectoryExists = Directory.Exists(@sSourceDir);
finally
{ OriginalContext.Undo(); }
Any ideas????
hi,
I am using time series algorithm.and my prediction query is like this
SELECT PredictTimeSeries([Performance]) FROM [Stud_Model]
The output is like this
Date Perf
9/11/2006 90
10/11/2006 92
11/11/2006 93
12/11/2006 -- (no prediction)
1/11/2007 --(no prediction)
I dnt know why there is no prediction after certail date?
Thanks,
Karthik
When I sign on to my computer I get this message, MSVCR70.dll can not be found try to reinstall it this may fix the problem, BUT CAN'T find the dll that is missing to reinstall it, HOW DO I FIX THIS please HELPPPPPPPPP!!!!!!
View 6 Replies View RelatedI have a normal nvarchar(50) field in a table that has a single comma in it but when i read it using OleDbDataReader the comma gets removed.
any ideas what i am doing wrong ?
many thanks
Hi guys
need some help, someone has given me some code to help me filter a gridview by the surname field by the selected letter of a dropdown list.
My code is below, however if i select a letter from the dropdown and click the button i get an error, can someone take a look please. <%@ Page Language="VB" MasterPageFile="~/MasterPage.master" Title="Untitled Page" %>
<script runat="server">
Protected Sub Button1_Click(ByVal sender As Object, ByVal e As System.EventArgs)
Dim dset As New Data.DataSet
Dim dview As New Data.DataView
dview.Table = dset.Tables("modelRegistration1")
dview.RowFilter = "surname LIKE" + surnameFilter.SelectedValue.ToString() + " % "
GridView1.DataSource = dview
GridView1.DataBind()
End Sub
</script>
<asp:Content ID="Content1" ContentPlaceHolderID="ContentPlaceHolder1" Runat="Server">
<table>
<tr>
<td style="width: 100px">
Surname Filter:</td>
<td style="width: 100px">
<asp:DropDownList ID="surnameFilter" runat="server" AppendDataBoundItems="True">
<asp:ListItem> - Please Select -</asp:ListItem>
<asp:ListItem Value="A">A</asp:ListItem>
<asp:ListItem Value="B">B</asp:ListItem>
<asp:ListItem Value="C">C</asp:ListItem>
<asp:ListItem Value="D">D</asp:ListItem>
<asp:ListItem Value="E">E</asp:ListItem>
<asp:ListItem Value="F">F</asp:ListItem>
<asp:ListItem Value="G">G</asp:ListItem>
<asp:ListItem Value="H">H</asp:ListItem>
<asp:ListItem Value="I">I</asp:ListItem>
<asp:ListItem Value="J">J</asp:ListItem>
<asp:ListItem Value="K">K</asp:ListItem>
<asp:ListItem Value="L">L</asp:ListItem>
<asp:ListItem Value="M">M</asp:ListItem>
<asp:ListItem Value="N">N</asp:ListItem>
<asp:ListItem Value="O">O</asp:ListItem>
<asp:ListItem Value="P">P</asp:ListItem>
<asp:ListItem Value="Q">Q</asp:ListItem>
<asp:ListItem Value="R">R</asp:ListItem>
<asp:ListItem Value="S">S</asp:ListItem>
<asp:ListItem Value="T">T</asp:ListItem>
<asp:ListItem Value="U">U</asp:ListItem>
<asp:ListItem Value="V">V</asp:ListItem>
<asp:ListItem Value="W">W</asp:ListItem>
<asp:ListItem Value="X">X</asp:ListItem>
<asp:ListItem Value="Y">Y</asp:ListItem>
<asp:ListItem Value="Z">Z</asp:ListItem>
</asp:DropDownList></td>
<td style="width: 100px">
<asp:Button ID="Button1" runat="server" Text="Filter:" OnClick="Button1_Click" /></td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
<tr>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
<td style="width: 100px">
</td>
</tr>
</table>
<br />
<asp:GridView ID="GridView1" runat="server" AutoGenerateColumns="False" DataKeyNames="ID"
DataSourceID="getModel" AllowPaging="True" EmptyDataText="N/A" PageSize="15">
<Columns>
<asp:BoundField DataField="ID" HeaderText="ID" InsertVisible="False" ReadOnly="True"
SortExpression="ID" />
<asp:BoundField DataField="applicationDate" HeaderText="Sign Up Date" SortExpression="applicationDate" />
<asp:BoundField DataField="firstName" HeaderText="First Name" SortExpression="firstName" />
<asp:BoundField DataField="surname" HeaderText="Surname" SortExpression="surname" />
<asp:BoundField DataField="dateOfBirth" HeaderText="DOB" SortExpression="dateOfBirth" />
<asp:BoundField DataField="postcode" HeaderText="Post Code" SortExpression="postcode" />
<asp:TemplateField HeaderText="Male" SortExpression="isMale">
<ItemTemplate>
<asp:CheckBox ID="isMale" runat="server" Checked='<%# Eval("isMale") %>' />
</ItemTemplate>
</asp:TemplateField>
<asp:TemplateField HeaderText="Female" SortExpression="isFemale">
<ItemTemplate>
<asp:CheckBox ID="isFemale" runat="server" Checked='<%# Eval("isFemale") %>' />
</ItemTemplate>
</asp:TemplateField>
</Columns>
</asp:GridView>
<asp:ObjectDataSource ID="getModel" runat="server"
SelectMethod="GetDataBySurname" TypeName="KayKayDataTableAdapters.modelRegistration1TableAdapter">
</asp:ObjectDataSource>
</asp:Content>
error message is
Server Error in '/KayKay' Application.
Syntax error: Missing operand after 'LIKEC' operator.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code. Exception Details: System.Data.SyntaxErrorException: Syntax error: Missing operand after 'LIKEC' operator.Source Error:
Line 6: Dim dview As New Data.DataView
Line 7: dview.Table = dset.Tables("modelRegistration1")
Line 8: dview.RowFilter = "surname LIKE" + surnameFilter.SelectedValue.ToString() + " % "
Line 9: GridView1.DataSource = dview
Line 10: GridView1.DataBind()Source File: E:InetpubwwwrootKayKayAdminupdateModels.aspx Line: 8 Stack Trace:
[SyntaxErrorException: Syntax error: Missing operand after 'LIKEC' operator.]
System.Data.ExpressionParser.Parse() +3158
System.Data.DataExpression..ctor(DataTable table, String expression, Type type) +109
System.Data.DataView.set_RowFilter(String value) +171
ASP.admin_updatemodels_aspx.Button1_Click(Object sender, EventArgs e) in E:InetpubwwwrootKayKayAdminupdateModels.aspx:8
System.Web.UI.WebControls.Button.OnClick(EventArgs e) +75
System.Web.UI.WebControls.Button.RaisePostBackEvent(String eventArgument) +97
System.Web.UI.WebControls.Button.System.Web.UI.IPostBackEventHandler.RaisePostBackEvent(String eventArgument) +7
System.Web.UI.Page.RaisePostBackEvent(IPostBackEventHandler sourceControl, String eventArgument) +11
System.Web.UI.Page.RaisePostBackEvent(NameValueCollection postData) +33
System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +4921
In the console, when right clicking on a table name...then selecting 'open table', the toolbar at the top of the page is not displaying. This is the graphical bar with the 'SQL' button that lets you filter the results.
How do I get the toolbar back, is it a setting?
Thanks!
Carl
Hello
I'm missing an RDL file... I've deployed the report to the server. Is there any way to recover the report as a RDL file again?
I'm using SQL Server 2000.
Many thanks
robhob
SELECT SkillNo, SkillName FROM [Skill] WHERE SkillName = " & oRs.Fields(lngCol).Value
whats wrong with this
Newbie SQL Question.
I need to build a results grid that reports totals or zero for an attribute
SELECT ClaimType, VendorNumber,
COUNT (ClaimNumber) AS ClaimCount
FROM ClaimHeader
GROUP BY VendorNumber, ClaimType
ORDER BY VendorNumber ASC;
THe underlying data has two claim types (UB, and HCFA). Some vendor numbers have only UB claims or only HCFA claims. I want my totals to show a zero for those vendor numbers. Example
VendorNumber ClaimType ClaimCount
234 UB 21
234 HCFA 12
235 UB 0
235 HCFA 15
My current group by doesn't give me the 3rd row in my example. How do I change my query to add those rows that have no claims as a zero. Put another way, every vendorNumber has to report a HCFA total and a UB total, even if they're zero.
Thanks.
Hi,
I have encountered an issue with one of my log files which has me somewhat puzzled.
I receieved notification at 00:02:16:36 that the Log file was full:
The log file for database 'TDS' is full. Back up the transaction log for the database to free up some log space..
A large number of these same messages have followed.
Prior to these messages starting the log file was backed up successfully at 00:00:01:10
Shortly after this there is a message - and this is the bit that confuses me - at 00:02:16:35 that says:
d:mssqldata ds_log.ldf: Operating system error 112(error not found) encountered.
So from what I can tell the log file was backed up successfully. Then approx 1 minute later the system can't find the log file???
Then I keep getting these log file full messages - until the next log backup (60 min later)...then everything is fine. HUH?
When looking at the log file for SQL it is sitting there, and isn't new, as it's created date is back when I setup the database initially.
Can anyone shed any light on what this message might mean and whether there is specifically something that I can do to circumvent it in the future.
Oh yeah we have nothing tricky in terms of replication or log shipping or anything like that.....
Thanks in advance for any assistance.
Troy
Hi all,
I would greatly appreciate a boost with this problem. I'm trying to 'script' the mundane task of adding descriptions to my tables (I know this can be done from Enterprise manager via Diagrams, but I have a huge (did I mention huge?) amount of tables and I really don't want to have to go to the properties of each and every table.
Now, if I read BOL right I can use sp_addextendedproperty (and here is their example):
sp_addextendedproperty 'Caption', 'Caption Test Table', 'user', dbo, 'table', TestExProp <--- Does this not add a description to the the table?
Well, I tried it and No Joy ! When I look at the table properties from the Diagram (w/in Enterprise Manager) I have a nice big EMPTY Description Box.
I tried changing it from 'Caption' to 'Description' thinking that would work but alas, I sit here and wonder where I went wrong ....
What have I missed?
Any input would put me out of my misery and make me a productive individual (at least for today !)
Schimelcat
I installed SQL server 2005 on a win2003 server box.
When I open the Connect to Server dialog box, I choose server type: Database Engine. There is no Servername listed, so I put in the name of the PC.
I get a long error message when I try to connect:
Cannot connect to PCName....
...error: 40 - Could not open a connection to SQL Server)...
When I try to go into the Surface area Configuration, I get this message:
"No sql server 2005 components were found on the specified computer. Either no components are installed, or you are not an administrator on this computer. (SQLSAC)"
I am logged in as Administrator in the PC, so did I do something seriously wrong with the installation?
In the services window, I can not fine MSSQLserver (not sure if this is relevant).
regards,
Jozi68
Hi
i need to finrd the find the missing records from a table based an formdate and todate,where the dates are not arranged in proper manner.
please helpme to find these records.
Rajesh
hi guys,
i have to check first the missign dates between dates 1/1/1999 till current date how many dates are missing and for those dates i have set - update quantity=0 for all those missing dates. docdate is datecolumn in saleshsitory and quantity is in salestable.
can anybody help me to solve this problem.
thanks a lot!
by accident the .ldf file has been deleted and no more avalible.
Is any way to receate log file and attached to my .mdf file?
pls help,
regards, Prakash
Hi,
Recently my server harddisk crashed and I Lost a one of the secondary data files of sqlserver database.
I have the main file intact and the recent data was also in that file only, but I was unable to attach the database as it required the other data files also.
Is there any way to create the database again from the existing data file( unfortunately there is no backup also which we can use to recreate the missing data file)
thanks
Anupam
Hello. We have a smaller system on one of our servers where a couple of users where beta-testing. This system used a SQLExpress 2005 database (databaseName_data.mdf).
But yesterday we saw that we couldn't use the system anymore, we got errors about the connection to the database. We open SQL Management Studio and connected to the SQL Server and we saw the name of the database in the list, but it was completly empty. Nothing. Not the "folder" for Tables, Programmability, Security... nothing.
We then browsed to the folder where the MDF file used to be, and there we only found the LDF file. The MDF file was gone.
We "know" that no one here have been shutting down the SQL Service and then deleted the DB, so we are trying to figure out what has happen.
It's not a major issue, because it's just a beta-test, but we don't want this to happen later on again...
Does anyone have a clue of what might be going on?
We are using three instances of SQL Express on this test machine btw... One for the public system (wich used this db), one for development and one for some random tests...
The public server and develop server used databases with the same name, but of course, different files on the hdd (and different instances of SQL Express).
//J
Edit: I might add that we hadn't backed this db up yet... Is there some way to use the LDF-file to restore some of the data?
Hey,
i don't see in my sql server 2005 the 'storage' under
Databases/MyDatabase/STORAGE for the full text catalogs.
How can I activate it? On an other computer I'm running the same version of my sql server 2005 i can see the storage label to click on...
I've searched so long without any mathces. Hope you can help me!!!
Thanks,
Steven
In EM that is, in QA if I use:use masterselect * from sysdatabasesI get:(6 row(s) affected)Server: Msg 220, Level 16, State 1, Line 1Arithmetic overflow error for data type smallint, value = 42840.
View 7 Replies View RelatedHisql server 2005. Is there any way to restore from a backup if the originaldb has been deleted? I have created a blank db and have tried to restoreinto it but it says the db is not the same.ThanksRegards
View 1 Replies View RelatedWe have a series of stored procedures that utilize some of the masterextended SPs such as xp_cmdshell. We migrated to SQL 2000 in April andeverything has worked great for over 3 months. However, this week wediscovered that the xp_cmdshell SP was missing from the masterdatabase. Here is the error we received:Server: Msg 2812, Level 16, State 62, Line 1Could not find stored procedure 'master..xp_cmdshell'.We reinstalled the SP from a previous instance so we are back up andrunning. What would cause the SP to all of a sudden vanish? I believewe have the SQL SP 3a patch installed. Although we have scanned theserver for worms and viruses, should we be looking in a particular logfor something malicious on the server? If it is not an attack of sometype, would there be another explanation for this? One other thingworth noting - a few weeks ago we could not utilize our systemadministrator account on SQL. In order to use the account again we hadto reset the password. Could these events be related and what could bea likely cause? For obvious reasons we are concerned and wouldappreciate any information anyone might have.Thanks!Jim
View 1 Replies View RelatedI have a report parameter with Allow null value checked (and also Allow blank value). The report works as expected when viewed in Visual Studio, i.e. if I don't supply a value for the parameter, the report still renders. However, when I try to view this report through the web ReportViewer I get the error message "The X parameter is missing a value". It works fine when a value is supplied but I want that parameter to be optional.
Any idea what's going wrong here?
Thanks.
There are 4 object ids in my sys.database_permissions view that do not exist in my sys.all_objects view in my master database. Anyone have any ideas where else I can look to identify these objects?
View 3 Replies View RelatedI am missing a dll file called d3dx9_29.dll and for the life of me I can't find it on the cd or anywhere. Can someone help me out?
Thank you for your time,
Frank Pizzolo
Please help:
when I want to create new data source from Data > Add New Data Source > Database > New Connection > Choose data sourse: MS Sql Server > Continue > Server name ----------> here in server name field i can see a lot of server names but not mine... so I'd like you to help me to find my server name...
thanks in advance!
Has anyone tried to open a cube into Business Intelligence Studio and the properties for the database vanished (project menu, properties)?
How do you get them back?
I created a report model with a single "data source view." The datasource view has three tables "Business, XRef, Employee" and a named query "PeopleCount" based on these tables. The smdl [design] view shows "Business, XRef,Employee" as "entities" and does not show the named query from the "data source view" (I don't know if that is normal). I published this report model to the reporting server (its showed "success").
I then used Report Builder to open the report model as a "chart", and it shows there is only one entity for me to play with, its called "XRef." Why do the other tables ("Business" and "Employee") not show up in the Report Builder's list of entities?
My own guess is that "XRef" is the only "actionable" table for making a chart. Indeed, I notice that among its "fields" is one called "Business Title" (which apparently comes from the Business table). But I also notice it does not have an "Employee Name." Why have the former and not the latter? Again, my own guess is that the type of the Employee.Name field, a nvarchar(MAX), might be considered unusable for reporting, since it is a "max" size. Thoughts?
I am using SQL Server 2005 RTM, which is running on Win 2K3 Server SP1.