Does anyone know how to force a SSIS step to fail? I don’t want to export a file if no records were written.
I found this but not quite sure how to implement it:
To do this, double-click on the connector line joining 2 of your
ExecuteSQL tasks and change the "Evaluation operation:" to any of the
options that include "Expression". This enables you to enter a
boolean expression that must evaluate to true for the path to be
followed. Assuming you've got an int parameter called "sp1rtnvalue"
which must evaluate to 1 for the flow to continue; your expression
would be: @sp1rtnvalue == 1
Am I suppose to define a @sp1rtnvalue in the stored procedure that creates the file I want to monitor? Do a record count in the stored procedure. In my pkg I enter the expression @sp1rtnvalue == 1 when I run that step the expression will evaluate to false and fail?
If so where exactly do I enter the Boolean expression (@sp1rtnvalue == 1) , what tab in what dialog/wizard??
I have a DTS package in which I would like it to fail if the table is empty. I would like to create the first task as this check (i.e. select @cnt = count(*) ... if @count = 0 then fail the task (to prevent further DTS Task processing.
Does anyone have an example or suggestion on how to set this particular Execute SQL Task to fail?
I have added an email task to the ON Error Event of my SSIS package, so that I will always know when there are errors. However I would like the SQL Server job executing the package to succeed even if the package fails. What setting do I change in the SSIS packageto achieve this? MaximumErrorCount?
I am currently going through a DTS package which I use to build my DW after changes all the connections I fired it and
"Cannot resolve the collation conflict between "SQL_Latin1_General_CP1_CI_AS" and "Latin1_General_CI_AS" in the equal to operation.". Possible failure reasons: Problems with the query, "ResultSet" property not set correctly, parameters not set correctly, or connection not established correctly. Any ideas?
I have created a SSIS master package. It is contains two child package. The master package is running in fine .
But i am calling the master package in the sql server agentjobs,the following error coming.
An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Native Client" Hresult: 0x80040E4D Description: "Login failed for user 'test1'."
I've SQL statement that fail when I execute it on the server. I get the below message:
Msg 50000, Level 18, State 1, Procedure USP_GTL_Transform, Line 226 A transformation of an important table failed
When I execute the sql statement in the SSIS Control flow 'Execute SQL Task" the task succeed and paint in green. When I check in db log its still failing but only presented succeeded in the SSIS
Why the task didnt fail? how can i make it fail and paint in red?
I am likely to work on moving our ETL system from SQL server 2000 to SQL server 2005. Code is being re written. I wanted to know from anyones previous experience like what kind of activity/data can cause a package to fail. I need to check that a certain package fails and logs error to the server error log and stops. And also check that a certain package fails, logs an error to the server error logs but continues to run.
Any thoughts in this regard would be very helpful for me.
I am running SQL Server 2012 on a VM and am trying to pull data from a network drive (S: or misvnascfs0003).I can import data using the Import Wizard and save the package as an SSIS package. When I try to Run the Package I get The Acquire Connection method call to the connection manager "SourceConnectionExcel" failed with the error...
If I save the file to the VM local drive the SSIS package run fine.When I log into SSIS through SSMS i have to run as "Administrator".
When I try to debug the break points will always say the source code is different from the current version, but the custom component in the GAC has the new version number. The other strange thing is the toolbox will not reset to the original version meaning it will not remove the custom components. The funny thing is after I compile the custom components and restart VS the custom component runs with the new code changes. I can see the new features I added, but the debugger and toolbox still seem to be broken.
I have tried the following 1) Reset the tool box. 2) uninstall all my custom dll from the GAC €śC:WINDOWSassembly€? 3) remove all my custom dll from €śC:Program FilesMicrosoft SQL Server90DTSPipelineComponents€? 4) restart VS 2005 5) reselect the custom components. 6) reboot my computer.
It seem like VS has another cache. For the tool box or something.
I need to detach a Database, but with "EXEC sp_detach_db 'test','false'" I can't do this because it is in use. Is there a Possibility to make a "force detach" or something?
Forgive my ignorance. I have been told you cannot run a force restore without SQL Agent running? Is that so?
Also, is it possible to execute a force restore from a command line. If so, how would you go about do this.
I ask these questions because recently our database and MSBD files became corrupted and couldn't restore them in the normal way. Had to manually rebuild MSDB file.
I have a script or SP that takes a very long time to performmultiple tasks, and after each one there is a PRINT statementthat shows the time and what was just accomplished, to help memonitor what's happening and estimate how long it will take.In a script, I can put a GO after each PRINT to cause the outputto appear immediately, but that's not possible inside an SP.Instead, it seems the output goes to a buffer, and the bufferis only output when a PRINT causes the buffer to become full.Sometimes there is a long delay before the buffer fills. Isthere a way other than GO to cause immediate printing? (Iguess I could just use longer messages, and fill up thebuffer with every one, but that's not very elegant.)Thanks,Jim GCountrywide Home Loans
I've a complex stored procedure, that makes a lot of insert, update,delete and so on.I would like to make some commits durint this sp, but of course theyare not "real" commit because who call the sp could decide for arollback.But I know that this commit has to be real. In fact, the transactionlog grows really too much during the execution.Is there a way to force a commit durint a sp ?thank you very much!
I set up odbc to link to sql express from access 2003, using sql authentication to force a login, and did not click 'save password'. when i open up access again, and open table, it goes right in without a login. How can I set so it does a login, at least each time Access opens?
I want to configure SQL 2k5 Express so that all connections are encrypted. I've found the documentation that gives the How-To steps, but I don't see the SSL option in the Network Configuration.
Is this possible with the Express edition?
Do I need to do something special with the installation?
My data flow has several transformations: 1. Search an employee, if the employee already exists, update it, otherwise insert it. 2. Once the new employee is created, i have to get its id (with another search transformation )to update another table with it. This id is an autonumeric , thats the reason i have to get it once the record is inserted.
At this momment this second search transformation to get the assigned id for the new reacord doesnt find any employee... i suppose its because these new data is not commited in the database....
I have a report that has multiple graphs on it. I would like to force a page break (new page) in between the different reports causing a report to be generated on it own page. Im assuming that Im missing something here because it seems like a easy/usable feature. Any help would be great.
I have a package that goes out and picks up a file off of a ftp server using the ftp task. How do I force the package to stop running if the file is not there?
I would like to know if there would be any special way to force drop a database from an ASP.NET page.
When I try to do it in the normal way, it gives me an exception like: Cannot drop the database 'xxxxxxx' because it is currently in use. I'would have to wait until there is a timeout. In fact that database can be accessed from another pages, but I want to know if I'd be able to force drop database even when another pages are using it.
I am connection to a SQL server that has force protocol encryption checked. From my ASP.net application, specifically in my connection string, what parameter do I need to use to take advantage of this encryption?
Does anyone know a way to force out all users from a particular database? I need to script this to perform some maintenance at a particular time every day.
I created a view from a table with out any where clause. All the rows from the table will be in the view with some extra info.
The table has a few indexes.
In my stored procedure I am storing two columns from the table ( IdHi , IdLo - primary key ) into a temp table and joining the temp to the view. Here the query is taking too much time and not using the index. Can I force the primary key index on View?
I have a complex query (16 table join) that until five days ago took 30sec to run. It now takes eight hours. I restored a backup of thedatabase from five days ago and the query plans are completelydifferent for the same exact query. Five days ago the final estimatedrow count is 1.6M now it is 1.7E+10 OUCH! The amount of data added inthose five days is insignificant (percentage wise). I rebuilt all theindexes using DBCC DBREINDEX with no change in the plan or results. Isthere anyway to save the query plan (from the backup) and run itagainst the new data?TIA,Tracy
I've been using some of the data mining capability in SQL 2005, and have been very impressed. But I've mostly been using decision trees/neural nets, and now have a problem that would seem to require clustering, but I'm not sure how to approach it...
Have list of parts by serial number and part number, and in a data cube have crunched a bunch of data to give me each parts' relative reliability.
So what I can do so far is to ask the cube "for a certain part number, which specific serial numbers are our 'bad actors'", ie have an unacceptably high failure rate compared to the average, by standard deviation.
The next logical question would be... what factors do these particular "bad" parts have in common? Environmental exposure, usage rates, a particular repair facility, etc etc. I have that type of raw data in other tables, no problem.
So what it seems like I would want to do is force a clustering algorithm to choose a certain segment of parts as a cluster and then use DM to determine what characteristics those parts share. Then we could see if there was any corrective action we could take, or whether we should just chuck those parts in the bin (if the DM didn't find any reasonable relationships between the parts). But I don't know enough about the clustering/association type DM to figure it out.
Hi, I've got an IS package which reads a lot of records from a text file and loads that into the database. The text file has column such as Firstname, Lastname, phone number etc and same as the database table.
The problem: IS works fine if I have the text file columns in the same order as the database columns but for example if have phone number in the place of firstname (in the text file) IS puts the phone numbers as firstname in the database and moves all the columns dow the order.
Is there anyway I could force IS to use the heading names in the text file and put it in the appropriate database columns?
Im looking at the sql server log, and I see a strange behavior. Im getting at least 5 "sa" login attempts from an sepcific IP address. How can I avoid this, lock that IP or add a delay to 'sa' failed logins?
In some text boxes within the table header, I want to force the text to wrap. This would be comparable to using Alt+Enter in Excel. For example, the text box may read like this...
