Forced Output Format - RS2000
Mar 14, 2007
A few details first:
The report server is remote to the development server (VS 2003).
The web application that will be calling it is ASP.NET 2.0 and developed in VS 2005.
I have a couple of questions:
a: Can I link to the report from the web application using a basic Hyperlink control rather than using a ReportViewer control?
b: How can I force which format it opens in? Say I want it to be rendered as a PDF in one instance but at an XSL document in another.
Many thanks and kindest regards,
TwoForTea
View 1 Replies
ADVERTISEMENT
Aug 19, 2015
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies
View Related
Dec 9, 2004
Hello everyone:
There is query output like:
1
2
3
4
How to specify it to be like"
1,2,3,4
?
Thanks
ZYT
View 1 Replies
View Related
Jun 12, 2002
Hello All,
I am new to SQL Server. I would like to know how to format output using isql on SQLServer7.0
e.g.
I want this selection
CUST_ID CUST_NAME CUST_TYPE ADDRESS
----------- ----------- ----------- -----------
1 CUST 1 CREDIT RISK ADDRESS1
1 CUST 1 CREDIT RISK ADDRESS2
2 CUST 2 GOOD ADDRESS1
2 CUST 2 GOOD ADDRESS2
2 CUST 2 GOOD ADDRESS3
3 CUST 3 BAD ADDRESS1
to display like this
CUST_ID CUST_NAME CUST_TYPE ADDRESS
----------- ----------- ----------- -----------
1 CUST 1 CREDIT RISK ADDRESS1
ADDRESS2
2 CUST 2 GOOD ADDRESS1
ADDRESS2
ADDRESS3
You are help will be much appericated.
Thanks & Regards
Nitin.
View 1 Replies
View Related
Oct 25, 2007
Using sql server
I want to create a txt file from a table i have. I have the data in the correct formats but i want to include some padding around my selected four columns.
Im not sure about the best way to go about this?
View 1 Replies
View Related
Apr 5, 2007
Hi,
I have the following problem.
I have made a parametered report where i ask a begin date (@datefrom) and an end date (@dateto).
when i enter my dates via the little calendar is see the format dd/mm/yyyy
When i do a preview of report i have a textbox with the following expression :
="Total work time from " & Parameters!DateFrom.Value & " to " & Parameters!DateTo.Value
but the output of the date format is mm/dd/yyyy.
What can i do to have the output format dd/mm/yyyy
Vincent
View 4 Replies
View Related
Aug 9, 2007
I am trying to format the result output from my query so that it looks like currency. Does anyone know how to do this?
Here is my very simple select statement:
SELECT Field_Value
FROM tbl_all_results
I was thinking some kind of cast/convert would do the trick but I can't seem to get anything to work.
Thanks for your help!
View 5 Replies
View Related
Aug 29, 2007
In my report I have used the "jump to url" for the report output but when I export this to excel I get a column with the correct data and also the url.
Is there anyway of exporting the data without the url?
I want my users to be able to view the report and click on the column the want to URL jump to but also be able to export just the raw data without the URL?
View 5 Replies
View Related
May 21, 2008
Month NoofAttendanceDays NoofPresentDays
January 25 20
Febrauary 23 21
March 26 20
April 24 21
Thanx in Advance
View 3 Replies
View Related
Jun 4, 2008
I have the following Query which gives the output in XML format.
select * from <Table_Name> For XML auto
I wanted to store this output in a .Xml file at my local machine.
I would prefer to have a proc when called generates the xml and stores it on the local m/c. Any ideas ?
Thanks,
View 3 Replies
View Related
Dec 6, 2004
I manually build my url for my reports. In the url I build, I can specify the output format I would like it to automatically use when the report opens. However, it always first opens the dialog box to either Save, Open, or Cancel. Is there anyway to bypass this and just open it in the format I have coded in the url? Thanks.
View 2 Replies
View Related
Sep 19, 2001
Hi Kids,
I've just upgraded a 6.5 database to version 7.0 and I'm having a problem with default date output formats.
Under 6.5 the output format was: Sep 2 2001 12:00PM
Under 7.0 the same field is output as: 2001-09-02 12:00:00.000
Is there a way to permanently set the default output format for dates on a database or server wide?
Thanks
Ron
View 1 Replies
View Related
Jun 8, 2004
Has anyone had experience formatting an excel file (i.e. run a macro) after it is (created &) outputted from a DTS package?
Also an easier question:
What is the best (easiest) way to create a unique filename in Excel with a datetimestamp in the file name (i.e. MyFile-20040608.xls)
Thanks!
View 3 Replies
View Related
Dec 12, 2014
I have sample data like 'J.S.xxxx','J.xxxx.'
Want to separate the . in the middle of word with single space and display results in following way.
J. S. xxxx
J. xxxx
Need the code in optimized way.
View 3 Replies
View Related
Jun 7, 2006
Hi All,Currently the query returns 2006-03-27 00:00:00, can I make it output03/27/2006, I want to truncate the time, and replace the hyphens withforward slashes. Any ideas?Thanks In Advance,~CK
View 6 Replies
View Related
Feb 21, 2007
Hello -
I am aware of the new password policies in SQL Server 2005, but I have not seen this yet. Can anyone please tell if it is part of the new software?
When a password has been reset, you can force the user to change it upon initial login?
Your help is appreciated!
Thanks,
David
View 2 Replies
View Related
Apr 28, 2008
is there a standard for forcing a timeout on a stored procedure? id like to test the exception handling on an application that calls some stored procedures and cant think of a way to test a timeout that is reliable.
View 3 Replies
View Related
May 22, 2007
I'd heard that upgrading SQL 05 to SP2 forced any databases at SQL 2000 compatibility (80) to SQL 2005 compatibility, but I can't find any documentation that says one way or the other.
Can anyone provide insight as to whether or not this is true?
Thanks,
Lenny
View 1 Replies
View Related
Sep 23, 2005
Hi all,
I'm Trying to replicate the creation of an "xml" file that is currently created using a C++ application. I want to take that application out of the picture, but need to create the same format XML file because a step later in the production process uses this file, and I cannot change it.
The output format I am looking for is:<?xml version="1.0" encoding="utf-8"?>
<FUNDS>
<AMRGX>
<NAME>AMERICAN GROWTH D</NAME>
</AMRGX>
<AHERX>
<NAME>AMERICAN HERITAGE FUND</NAME>
</AHERX>
<AMRVX>
<NAME>AMERICAN INVESTORS GROWTH FUND</NAME>
</AMRVX>
.
.
.
</FUNDS>The problem I am having is that I cannot seem to get the level/node of the fund symbol (AMRGX, AHERX, and AMRVX in the example above) as it needs to be. I think this must be some non-standard use of XML, since the tag is really the data itself (?)
The closest I have been able to get so far is:
<FUNDS>
<SYMBOL>AMRGX</SYMBOL>
<NAME>AMERICAN GROWTH D</NAME>
</FUNDS>
<FUNDS>
<SYMBOL>AHERX</SYMBOL>
<NAME>AMERICAN HERITAGE FUND</NAME>
</FUNDS>
.
.
.As you can see (hopefully) I am able to get the data I need but cannot get:
(1) the FUNDS tag(s) to be the very highest level/root.
nor (2) the SYMBOL part (tag label?) to be the actual variable stock fund.
Am I 'splaining this well enough? I don't necessarily need all the code, since I know I haven't given enough info to help with that, but my basic question is - - Is it possible to get a variable TAG based on the table DATA?
I want my SYMBOL tag to be the actual SYMBOL for the stock fund.
Confused? Not as much as I am *LOL* I am new to the use of all but XML EXPLICIT use, so any help would be appreciated - at least regarding my two formatting questions.
Yes, I have (and am still) searching around BOL for my answers, but so I have found nothing that helps me out. Meanwhile, suggestions are welcome!
Thanks!
View 6 Replies
View Related
Feb 28, 2014
I have the following code and the result set is coming out as nvarchar. So, when I create a report in SSRS, it is not formatting as a date.
, CASE
WHEN isnull(cv2.Accepted,0)='True' AND cv2.Visit ='V2' AND cv2.StepNo='3' THEN 'Y'
ELSE CONVERT(varchar,[dbo].[fn_Get_WorkingDays] (co.PlannedGoLiveDt, -10))
END AS 'System Verified'
View 3 Replies
View Related
Feb 8, 2007
Hello folks,
A while back I wrote a .NET assembly with a COM wrapper to provide an interface between Report Services and legacy MS Access applications. Basically, it returns the byte arrays from the .render method (output format emf) to be written into an Access image control.
This worked flawlessly on any 8.5"x11" RS report we threw at it on the first two Report Services I tried it against. When we set up a third Report Service at another facility, the same reports were coming out with the physical dimension metrics on the emf as10"x13", so the Access version of the report is clipped significantly on the edges.
I trapped the output into a System.Drawing.Image object in the .NET assembly and put a watch on it. The two servers that work as I expected show HorizontalResolution and VerticalResolution as 96.0946, while the one that doesn't has these values as 81.2799. The PhysicalDimension property shows 21542.3672 x 27939.4316 on the working servers and 25531.25 x 33031.25 Otherwise, the properties of the images seem to be identical. The PhysicalDimension values I see are completely consistent with the size units of 0.01 mm, as the the emf documentation indicates. The resolution of 96 is consistent with the "Windows default" values of 96 dpi. The ratio of the resolutions is correct for an 85% scaling factor for the "misbehaving" Report Service.
I have not been able to find any reason for the differences between the Report Services, and I have not been able to figure out how to control it. I tried setting DpiX and DpiY as 96 in the DeviceInfo for the render call with no change in the behavior of either server.
Can anybody enlighten me on what is happening and what I need to do to get consistent behavior between the servers? Or why the DpiX and DpiY settings for the emf rendering extension don't seem to work?
Thanks,
Tim Bailey
Energy Laboratories, Inc.
View 4 Replies
View Related
Jan 29, 2005
SELECT membername, outputval
case when choice = 0 then outputval else null end as outputval
from MyDatabase
group by membername, outputval
how to format outputval:
if outputval < 40000
format outputval as:
5 - 5.78 - 6.9 - 6,778 - 4,567.8 - 12,456.78 - etc.
if outputval >= 40000
format it as a scientific.
View 1 Replies
View Related
May 16, 2013
I am trying to output a number in a specific format. I am playing with CAST() and CONVERT() but have not been able to get what I need.
Current: 0.019891
Desired: 000199
It doesn't have to remain in a number format, as i will be output to a CSV in order to bulk load into another system.
View 4 Replies
View Related
Aug 19, 2015
I have a table Test123 having three column EmpID,AttribName,AttribValue.
run the below query to generate table structure and data.
Create Table Test123(EmpID int,AttribName varchar(50),AttribValue varchar(50))
insert into Test123 values(1,'Name','X')
insert into Test123 values(1,'Age',50)
insert into Test123 values(1,'Salary',1000)
insert into Test123 values(2,'Name','Y')
insert into Test123 values(2,'Age',30)
insert into Test123 values(2,'Salary',2000)
insert into Test123 values(3,'Name','Z')
insert into Test123 values(3,'Age',35)
insert into Test123 values(3,'Salary','One Hundred')
And I want output in below format.
AttributeValueType
=================
AGE | NUMERIC
NAME | ALPHABET
SALARY | ALPHANUMERIC
==================
View 6 Replies
View Related
Jan 24, 2007
Hi all,
We have to support forced failover under certain scenarios. Whilst using 'ForceFailoverAndAllowDataLoss' work perfectly the database is not available for several minutes. The failover command returns very quickly, but the database enters a recovery/restore state and will not accept connections for up to 2 minutes.
Am I missing an additional step that would speed this up?
Many thanks,
Nick
View 2 Replies
View Related
Apr 17, 2014
I need to display the output of a table in a specific format, I have attached the sample screenshot and code for reference.
I tried with pivot but does not seems to be working.
View 2 Replies
View Related
Mar 23, 2015
I am working on a code that will convert the query output into a html query output. That is the output of the query will be along with html tags so that we can save it as a html file.
The stored procedure that i have used is downloaded from symantec website and is working fine. Below is the code of that stored procedure.
/****** Object: StoredProcedure [dbo].[sp_Table2HTML] Script Date: 12/21/2011 09:04:30 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[sp_Table2HTML] (
@TABLENAME NVARCHAR(500),
@OUTPUT NVARCHAR(MAX) OUTPUT,
[Code] ....
The code works fine and i am able to get the output with html tags. The problem occurs when i insert stylesheet in the code. I tried to enforce styles using a stylesheet for the table returned in my sql code, so that it will look good. below is the stylesheet code that i inserted between <head> and </head> tags.
<style type="text/css">table.gridtable { font-family: verdana,arial,sans-serif; font-size:10px; color:#333333;border-width:1px; border-color: #666666; border-collapse: collapse; } table.gridtable td {border-width: 1px; padding: 8px; border-style: solid; border-color: #666666; background-color: #ffffff;}</style>
If I run the procedure without the style sheet code, it works fine. but when i run the procedure with style sheet code i am getting the below errors.
Msg 105, Level 15, State 1, Line 98
Unclosed quotation mark after the character string '</table></body><'.
Msg 102, Level 15, State 1, Line 98
Incorrect syntax near '</table></body><'.
[Code] .....
I checked the code and i am not able to find what is the mistake. I tried changing the quotation mark but it didn't worked.
View 6 Replies
View Related
Mar 16, 2014
i m creating one google map application using asp.net with c# i had done also now that marker ll be shown from database (lat,long)depends on the lat,long i wanna display customer,sales,total sales for each makers in html table format.
View 2 Replies
View Related
Feb 14, 2008
Hi Folks,
I have a 3 tier app and want to build a dedicated network between the app server and it's DB server. Both machines have an interface on the main network and also an interface on the dedicated network. I want to force all the SQL traffic (or even all traffic if that is the only solution) between the app and it's SQL server onto the dedicated network......?
We're using SQL Server 2000.
Any thoughts would be welcome.
Cheers
View 2 Replies
View Related
Jan 25, 2006
We want to start working with Reporting Services on a Windows Server 2003 (SP1) server that has SQL2000 (SP3) Standard Edition. I thought I could load RS from the CD but it does not appear to be on there. I seem to remember that Microsoft added RS to SQL2000 in the last year or so. Can I download a copy of it, or how do I go about getting a copy and how to I show my boss that it is a legit copy? Thanks...
View 4 Replies
View Related
Aug 15, 2007
We just applied SP2 to our Windows 2003 server & it has had an odd impact RS2000.
When trying to change the data source of a report to a shared data source, the browse button when clicked does not take you to the page to enable selection! It does nothing!
Does anyone have any ideas on what's going on there?
View 1 Replies
View Related
Oct 12, 2007
Here's the situation we're facing. Our organization is going to consolidate into a single domain. The plan of action is to disband the old domain, and create an all new domain. Most of our servers will also be renamed in the process.
We've got something of a two-server setup, with one machine handling SQL Server, and the other hosting various intranet sites, including Reporting Services 2000.
SQL Server itself shouldn't be a huge problem to migrate - the machine only has about half a dozen Windows logins set up. In my experience, though, Reporting Services is a much more fragile animal. Just getting it up and running on Win2003 SP1 and coexisting with ASP.NET 2.0 was enough of a stunt already. What will I have to watch out for to make sure this doesn't completely hose our installation? Would it be too optimistic for me to hope that I'll just have to reconcile any domain service accounts, change the connection string for the report server catalog database, and be done with it?
View 1 Replies
View Related
Nov 27, 2007
Hi there,
I've got a RS2000 report from Analysis services 2000. This report is working fine but after the upgrade to SQL2K5, i'm having issues with changes to parameters.
Basically i'm passing DateQuarter, CustomersLevel as parameters to the following mdx script. I've tried to change mdx script in RS2005 but no luck yet. I don't much about the parameter level changes in sql2k5. So can anyone suggest what is wrong in the script.
Code Block
RS2000
="with " &
"member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)' " &
"set [Rolling Quarters] as '" + Parameters!DateQuarter.value +".lag(4):" + Parameters!DateQuarter.value + "'" &
"SELECT " &
"{[Measures].[Ex Price]} ON COLUMNS , " &
"filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows " &
"FROM Sales " &
"WHERE (" & Parameters!CustomersLevel.Value & ")"
RS2005
with
member [Measures].[Ex Price] as 'coalesceempty([Measures].[Ex Price After Trade Discount - Detail],0.00)'
set [Rolling Quarters] as '@DateQuarter' +'.lag(4):' + '@DateQuarter'
SELECT
{[Measures].[Ex Price]} ON COLUMNS ,
filter({CrossJoin([Items by Class].[Item Class Description].members, [Rolling Quarters])}, [Measures].[Ex Price] > 0) on Rows
FROM Sales
WHERE STRTOSET(@CustomersLevel)
Thanks in advance,
Vivek
View 4 Replies
View Related
