Forecasting In Analysis Tab Cannot View
Jan 2, 2007Hi I installed the add-in for excel data mining but when i try to select a table, in the tab of analyze, dont have any properties. please help me.
carlos of southamerica
Hi I installed the add-in for excel data mining but when i try to select a table, in the tab of analyze, dont have any properties. please help me.
carlos of southamerica
I have built an analysis cube and I am wondering how I can now somehow add in some kind of forecastinbg to it?
I have a time dimension in years, quarts, months, days.
Is there a way I can show forecasting calculations for future dates?
I have a cube. Its xml is different at some point than its design view. Suppose for some dimension and its attributes, source table is different than what it showing in the properties window for them..
Is this possible? How to read cube xml because there are repeating tags in it. There are two type if dimension tags.. one has only attributed and other has all properties.
I've saw many tutorials about using TimeSeries. But all of them using a table. But I'm using a cube to represent data. So I'm trying to build forecast from cube, but it doesn't so good as in could be.
I've got the same problem as desribed in Microsoft's tutoral Adventure work. So I need to forecast a series of sales.
The problem is that I can't create second key value, as it shown in tutorial. So I can't split good's sales. I have created dimentions for goods and for time. So cube's browser shows me very handsome view, but the problem with mining model still remains...
Please, help me! How can I solve this problem?
Can I create a separate table from cube to build forecast by this table?
Or I can solve this problem not using tables?
Hi,
We are trying to forcast product sales for next three months based on their sales for previous 12 months. In this case, Microsoft Time Series algorithm requires the sales data to be present for each product for past 12 months (???). However, our products have typical life span of 6 months and obviously the new products will not have sales before they were added. Any help will be very much appreciated.
Thanks
Riju
In order to setup my forecasting mining model I have created a special view that runs against my fact table and creates time series on the level I need.
Code Snippet
Select DFUKEY, DATE, QTY from Dim_FACT where DFKEY like '020%'
So I get the following input fr my model:
time series key (e.g. DFUKEY)
date (time key)
QTY (to be predicted)
For testing purposes I created a small view (similar to AdventureWorks) that only contained a few time series. The model was created and processed in ~2 minutes or less. The viewer came up almost immediately and I was able to see results.
Now my real view has about 25000 time series I need a forecast for and that I also like to review in the viewer. If I create a mining model against that bigger view the processing takes ~15m or so and the viewer is likely to time out.
The worst part thought is when I try to get the forecast for a time series (see query below) it takes minutes before the answers come back.
Code Snippet
SELECT FLATTENED [DFUKEY], PredictTimeSeries([QTY], 12)
FROM [TimeSeries]
WHERE [DFUKEY] = '02078147AG'
I would understand if without the WHERE clause it would take long but as is?
I am pretty sure I created the model the right way so I wonder if somebody can give me recommendations as to how forecast larger numbers.
Finally I intend to call the foarcast for a particular series using an Action from within a cube.
Thanks in advance.
Dirk
Hi All,
Does anyone know how is forecasting defined in the Data Mining Add-In (Excel)? If we look to the web, we would see different Forecasting Standards. What specific Forecasting algorithm and standards used in the Forecasting in the Data Mining Add-In (Excel)?
Regards,
Joseph
1. As per my current development SQL Sever Analysis Database consists of two Cube (Cube A and Cube B). Cube A and Cube B share the same data source view (DSV1). The source for both these cubes has the same data source (DS1).
2. As per the requirement I need to create third Cube i.e. Cube C. Is it possible to create a second Data Source View (DSV2). The Source of second Data Source View (DSV2) will be the same data source(DS1).
I am thinking to create second Data Source View (DSV2) for Cube C because existing layout of the DSV1 has become complex. I wanted to know the pros and cons of creating a multiple data source view with same data source
I want to change the color of the ssas cube calculated member in formview from red background to white or back to default color settings. This also includes changing the text color back to default. What properties do I have to change?
View 4 Replies View RelatedMy Power view reports do not show the grand totals correctly. I think my issue relates perfectly to [URL]. However we have updated service pack 2 on both the sql data warehouse and the ssas box. They are 2012. However the power view is still incorrect. Pivot tables seem to work just fine. In AS I have a 2 separate measure groups that has a total count. I then use mdx to bring those two together. Something I have done many times in past with as 2008. My mdx looks like this below. I then hide Total Count EC (from measure group 1) and Total Count SF (from measure group 2). This way I have 1 total count value and they can use another dimension to see the two separate if needed.
CREATE
MEMBERCURRENTCUBE.MEASURES.[Total
Count New] AS
//
([Measures].[Total Count] + [Measures].[Total Count SF]),
DISPLAY_FOLDER
=
'Totals',
ASSOCIATED_MEASURE_GROUP=
'Report',
FORMAT_STRING
=
"#,#0",
VISIBLE=
1;
The measure Total Count EC works just fine but the Total Count (MDX) does not . All in Power Pivot works fine but in Power View the grand totals are not correct.
After connected to Analysis Services and following the path below:
Analysis Service - Databases - Cubes
I create the parameters for a custom report after right click on a specific Cube and select Browse to arrive at a view where i can define dimensions and parameters as well as drag and drop measure to the report rows and columns. The left top File bottom only give me a Save Selection or Save ALL option. However, i'm not sure where it saves it to or if it saves the settings for this custom report at all.
I pull this report monthly and it's a pain to recreate all the parameters. How to save this template for future pulls or maybe even incorporate the pull into excel for monthly refresh instead?
Im having a problem with Excel 2007 DM and SQL 2005 and I hope someone out there has a solution.
Consider the following environment:
Windows XP SP2 or Windows Vista, Excel 2007, Data Mining Add-in, SSAS 2005 (with session mining models enabled, an AdventureWorksDW cube deployed and drill-through actions available).
Now take the following steps:
1. In Excel 2007 set up a connection to SSAS
2. Connect to the cube and create a new pivot table report (drag and drop whatever you like)
3. Right-click on one of the cell values in the data region and either select a drill-through action, or, select Show Details in the context menu
4. Ensure that you have at least 10 detailed records that are generated on a new worksheet page; you should have a time-based column in your detailed records
5. Select the table of detailed data, then select the Analyze tab (within the Table Tools grouping) which appears in the topmost menu above the ribbon
6. Click the Forecast button in the ribbon and choose both the field which you want to predict as well as the time-based column (from step 4) as well as the number of time periods to forecast
7. Finally click OK.
1. Having followed these steps on both WinXP SP2 and Vista, I keep coming across the exception: HResult:0x800A03EC. Any ideas as to why this exception pops up? If I was using a normal table of data (which was not generated from a Show Details or drill-through action), then the Forecast button works fine.
I googled it and thought the localization settings for SSAS 2005 and Excel 2007 needed to be the same (initially they werent). Ive tried removing the auto-filters which appear atop each column in the detailed data table prior to clicking the Forecast button, and, Ive also tested for a series of data across a number of time periods with the same result.
Also, a colleague of mine discovered that the column headers that appear by default from a drill-through start with "$[", and, in removing them the Forecast function appears to work.
I would have thought there would be a seamless transition in Excel 2007 between data retrieved from a cube and the DM Add-in featueres (or at the very least, a more meaningful exception message than the one presented).
Is there something Ive missed, or, is there a KB article I havent come across yet? As I know for a fact that the problem is reproducible, is there a fix to this problem on its way to us? Is there a useful workaround that doesn't require manual intervention?
Thanks,
A.
I am trying to configure the reporting for TFS using SQL Server. But I get following error when viewing any report:
So I try to manually process the cube to check if it works. I am following this article: [URL] ....
When I click on GetProcessingStatus and invoke it (with last field set as TRUE) I get following error:
How to resolve this issue and be able to see the reports.
I have, a SSAS 2012 tabular instance with SP2, there is a database on the instance with a read role with everyone assigned permissions. When configuring the Power BI analysis services connector, at the point where you enter Friendly Name, Description and Friendly error message, when you click next I receive the error "The remote server returned an error (403)." I've tested connecting to the database from Excel on a desktop and connect fine.I don't use a "onmicrosoft" account so don't have that problem to deal with.
We use Power BI Pro with our Office 365. As far as I can tell that part is working ok as I pass that stage of the configuration with a message saying connected to Power BI.The connector is installed on the same server as tabular services, its a Win2012 Standard server. The tabular instance is running a domain account that is the admin account for the instance (this is a dev environment) that account is what I've used in the connector configuration. It's also a local admin account. There is no gateway installed on the server.
I have a cube that we are processing nightly via an Analysis Service Processing Task in SSIS. In order to increase the performance of the processing time, we elected to use a lot of rigid dimension attributes, and do a full process of everything in the SSIS task. The issue that I am having is that after that task completes, I need to go into Visual Studio to deploy the cube becuase we are unable to browse or use the cube. This issue seemed to start once we changed the SSIS Analysis Service Processing Task to do a full process on the dimensions, rather than an incremental.
I would expect that once development is done, and it is processed and deployed, that is it. My thinking is that the SSIS task should just update the already deployed cube,
How to right choose key column in"Mining Structure" for Microsoft Analysis Services?
I have table:
"Incoming goods"
Create table Income (
ID int not null identity(1, 1)
[Date] datetime not null,
GoodID int not null,
PriceDeliver decimal(18, 2) not null,
PriceSalse decimal(18, 2) not null,
CONSTRAINT PK_ Income PRIMARY KEY CLUSTERED (ID),
CONSTRAINT FK_IncomeGood foreign key (GoodID) references dbo.Goods ( ID )
)
I'm trying to build a relationship(regression) between “Price Sale” from Good and “Price Deliver”.But I do not know what column better choose as “key column”: ID or GoodID ?
It is possible to create Analysis Services project (*.dwproj) in Visual Studio 2012 Data Tools?
View 5 Replies View RelatedI am using
SSAS: version 2008
Excel: version 2013
I am connecting to SSAS cube from Excel and I have date dimension with 4 fields (I have others but I don't use it for this case). I created 4 fields in order to test all possible scenarios that I could think of:
DateKey:
- Type: System.Integer
- Value: yyyyMMdd
Date:
- Type: System.DateTime
DateStr0:
- Type: System.String
- Value: dd/MM/yyyy (note: I am not using US culture)
- Example: 01/11/2015
DateStr1:
- Type: System.String
- Value: %d/%M/yyyy (note: I am not using US culture)
- Example: 1/11/2015
Filtering on date is working fine:
Initially, in excel, filtering on date was not working. But after changing dimensional type to time, and setting DataType to Date, as mentioned in [URL] filter is working fine as you can see in the picture.Grouping on date is not working:
I have hierarchy in my Date dimension and I can group based on hierarchy, no problem. But user is used to pre-build grouping function of excel, and he wants to use that. Pre-build functions of Excel, Group and ungroup seems to be available as you can see in following picture:
But when user clicks 'Group', excel groups it as if it is a string, and that is the problem. User wants to group using pre-build grouping function available in Pivot table. I also find out that Power Pivot Table does not support this excel grouping functionality. And if I understood well, this pre-build grouping functionality of excel, needs to do calculation at run time, and that is not viable solution if you have millions of rows. So Power pivot table does not support pre-build grouping functionality of excel and hence we need to use dimension hierarchy to do the grouping. But I am not using Power Pivot table, I am using simple Pivot Table. So I expect grouping functionality to be working fine. Then I tried to do simple test. I created a simple data source in excel itself. And use it as source of my Pivot table. Then grouping is working fine. The only difference that I can see is (When double click the Measure value in Excel),For date values of my simple test, excel consider them as 'Date'.
For date values of my data coming from cube, excel consider them as 'General'
2.1. But value here is same as it was in simple test.
2.2. 'Date Filter' works just fine.
2.3. If I just select this cell and unselect it, then excel change type to 'Date' though for that cell.
2.4. I have created 4 different types of fields in my date dimension thinking that values of attribute of my dimension might be the problem, but excel consider 'General' for all of them.
2.5 This value (that can be seen when double clicking on measure) comes from 'Name Column' of the attribute. And the DataType defined is WChar. And I thought that might be the reason of issue. And I changed it to 'Date'. But SSAS does not allow it to change to 'Date' giving error : The 'Date' data type is not allowed for the 'NameColumn' property; 'WChar' should be used.
So, I don't know, what is the puzzle piece that I am missing.
1. Date filter works, group does not work
2. Excel consider it as 'General' string.
3. SSAS does not allow to change 'NameColumn' to Date.
I would like to know the best practice for running analysis service in terms of port usage. Is it better to run on a specific port or have dynamic ports ? We have clustered servers that run default on 2383 but not sure with non clustered what's the best way to get performance.
View 2 Replies View RelatedI want to find out if it is possible to create a role in a cube without an AD account, e.g. using a GMail email address.
View 3 Replies View RelatedI am looking to create a constraint on a table that allows multiplenulls but all non-nulls must be unique.I found the following scripthttp://www.windowsitpro.com/Files/0.../Listing_01.txtthat works fine, but the following lineCREATE UNIQUE CLUSTERED INDEX idx1 ON v_multinulls(a)appears to use indexed views. I have run this on a version of SQLStandard edition and this line works fine. I was of the understandingthat you could only create indexed views on SQL Enterprise Edition?
View 3 Replies View RelatedWrite a CREATE VIEW statement that defines a view named Invoice Basic that returns three columns: VendorName, InvoiceNumber, and InvoiceTotal. Then, write a SELECT statement that returns all of the columns in the view, sorted by VendorName, where the first letter of the vendor name is N, O, or P.
This is what I have so far,
CREATE VIEW InvoiceBasic AS
SELECT VendorName, InvoiceNumber, InvoiceTotal
From Vendors JOIN Invoices
ON Vendors.VendorID = Invoices.VendorID
[code]...
Hi guys 'n gals,
I created a query, which makes use of a temp table, and I need the results to be displayed in a View. Unfortunately, Views do not support temp tables, as far as I know, so I put my code in a stored procedure, with the hope I could call it from a View....
I tried:
CREATE VIEW [qryMyView]
AS
EXEC pr_MyProc
and unfortunately, it does not let this run.
Anybody able to help me out please?
Cheers!
I compared view query plan with query plan if I run the same statementfrom view definition and get different results. View plan is moreexpensive and runs longer. View contains 4 inner joins, statisticsupdated for all tables. Any ideas?
View 10 Replies View RelatedHi,
I have some questions about SQL Servers 2000 and 2005 compatibility.
In my configuration I have to use both servers.
The cubes are stocked in 2005 server.
May I transfer from 2005 to 2000 Analysis Services the cubes?
If yes, what is the procedure? The result of migration is the same in the two different versions?
If not, how can I solve this problem?
Thanks in advance.
I had given one of our developers create view permissions, but he wants to also modify views that are not owned by him, they are owned by dbo.
I ran a profiler trace and determined that when he tries to modify a view using query designer in SQLem or right clicks in SQLem on the view and goes to properties, it is performing a ALTER VIEW. It does the same for dbo in a trace (an ALTER View). He gets a call failed and a permission error that he doesn't have create view permissions, object is owned by dbo, using both methods.
If it is doing an alter view how can I set permissions for that and why does it give a create view error when its really doing an alter view? Very confusing.
I have this view in SQL server:
CREATE VIEW dbo.vwFeat
AS
SELECT dbo.Lk_Feat.Descr, dbo.Lk_Feat.Price, dbo.Lk_Feat.Code, dbo.SubFeat.SubNmbr
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
When ever I open using SQL Entreprise manager to edit it by adding or removing a field i inserts Expr1,2.. and I don t want that. The result I get is:
SELECT dbo.Lk_Feat.Descr AS Expr1, dbo.Lk_Feat.Price AS Expr2, dbo.Lk_Feat.Code AS Expr3, dbo.SubFeat.SubNmbr AS Expr4
FROM dbo.Lk_Feat INNER JOIN
dbo.SubFeat ON dbo.Lk_Feat.Idf = dbo.SubFeat.Idt
I don t want Entreprise manager to generate the Expr fields since I use the real fields in my application.
Thanks for help
I was looking through our vendors views, searching for something Ineeded for our Datawarehouse and I came across something I do notunderstand: I found a view that lists data when I use it in t-sql,however when I try to use the statement when I modified the view (viaMS SQL Server Management Studio) I can not execute the statement. I getThe column prefix 'dbo.tbl_5001_NumericAudit' does not match with atable name or alias name used in the query.Upon closer inspection, I found two ON for the inner join, which I dontthink is correct.So, how can the view work, but not the SQL that defines the view?SQL Server 2000, up to date patches:SELECT dbo.tbl_5001_NumericAudit.aEventID,dbo.tbl_5001_NumericAudit.nParentEventID,dbo.tbl_5001_NumericAudit.nUserID,dbo.tbl_5001_NumericAudit.nColumnID,dbo.tbl_5001_NumericAudit.nKeyID,dbo.tbl_5001_NumericAudit.dChangeTime,CAST(dbo.tbl_5001_NumericAudit.vToValue ASnVarchar(512)) AS vToValue, dbo.tbl_5001_NumericAudit.nChangeMode,dbo.tbl_5001_NumericAudit.tChildEventText, CASEWHEN nConstraintType = 3 THEN 5 ELSE tblColumnMain.nDataType END ASnDataType,dbo.tbl_5001_NumericAudit.nID,CAST(dbo.tbl_5001_NumericAudit.vFromValue AS nVarchar(512)) ASvFromValueFROM dbo.tbl_5001_NumericAudit WITH (NOLOCK) LEFT OUTER JOINdbo.tblColumnMain WITH (NoLock) INNER JOIN---- Posters comment: here is the double ON--dbo.tblCustomField WITH (NoLock) ONdbo.tblColumnMain.aColumnID = dbo.tbl_5001_NumericAudit.nColumnID ONdbo.tbl_5001_NumericAudit.nColumnID =dbo.tblCustomField.nColumnID LEFT OUTER JOINdbo.tblConstraint WITH (NOLOCK) ONdbo.tblCustomField.nConstraintID = dbo.tblConstraint.aConstraintID AND(dbo.tblConstraint.nConstraintType = 4 ORdbo.tblConstraint.nConstraintType = 9 ORdbo.tblConstraint.nConstraintType = 3)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CAST(CAST(vToValue AS decimal(19, 6)) AS nVarchar(512)) ASvToValue,nChangeMode, tChildEventText, 5 AS nDataType,nID, CAST(CAST(vFromValue AS decimal(19, 6)) AS nVarchar(512)) ASvFromValueFROM dbo.tbl_5001_FloatAudit WITH (NOLOCK)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CAST(vToValue AS nVarchar(512)) AS vToValue, nChangeMode,tChildEventText, 2 AS nDataType, nID,CAST(vFromValue AS nVarchar(512)) AS vFromValueFROM dbo.tbl_5001_StringAudit WITH (NOLOCK)UNION ALLSELECT aEventID, nParentEventID, nUserID, nColumnID, nKeyID,dChangeTime, CONVERT(nVarchar(512), vToValue, 121) AS vToValue,nChangeMode,tChildEventText, 3 AS nDataType, nID,CONVERT(nVarchar(512), vFromValue, 121) AS vFromValueFROM dbo.tbl_5001_DateAudit WITH (NOLOCK)
View 1 Replies View RelatedA colleague of mine has a view that returns approx 100000 rows in about 60 seconds.
He wants to use the data returned from that view in an OLE DB Source component.
When he selects the view from the drop-down list of available tables then SSIS seems to hang without any data being returned (he waited for about 15 mins).
He then changed the OLE DB Source component to use a SQL statement and the SQL statement was: SELECT * FROM <viewname>
In this instance all the data was returned in approx 60 seconds (as expected).
This makes no sense. One would think that selecting a view from the drop-down and doing a SELECT *... from that view would be exactly the same. Evidently that isn't the case.
Can anyone explain why?
Thanks
-Jamie
I'm looking to see if I have a issue with excessive IO activity caused by less-than-ideal access patterns.
So I've run this query to look at logical and physical reads for logical writes:
selectsql_handle, plan_handle,
total_physical_reads, last_physical_reads,
min_physical_reads, max_physical_reads,
total_logical_writes, last_logical_writes,
min_logical_writes, max_logical_writes,
total_logical_reads, last_logical_reads,
min_logical_reads, max_logical_reads
fromsys.dm_exec_query_stats
The question is, when can it be considered excessive?
Or can you just order the results by descending order and see if you can make improvements on the worst ones?
The same goes for this query for pageiolatch wait counters and times for indexes:
select database_id, object_id, index_id, partition_number, page_io_latch_wait_count, page_io_latch_wait_in_ms
from sys.dm_db_index_operational_stats (null,null,null,null)
I have SQL query, and I am trying to write MDX with similar logic. Logic has where clause:
Where (((CD_TYP_CAT_PARENT = 'LOAD' OR CD_TYP_CAT_PARENT = 'SPEND') AND (CD_TYP_CAT NOT IN('REVERSAL','REFUND','FEE')))
OR (CD_TYP_CAT_PARENT = 'OTHER' AND CD_TYP_CAT = 'SPEND'))
how do I write this in MDX?
I just ran a testbed of 4 types of SQL queries:1. inline SQL with a StringBuilder2. managed sql3. SQL text processing (@SQL as varchar(5000); SET @SQL = 'SELECT ' + @var...)4. a regular sproc that has the columns and table name hard coded1,2, and 4 always end up at about the same time given the averages.3 is always at last 1.5 times slower, and usually closed to 2 times.1 and 2 both use StringBuilders, the code is a direct copy, and 3 is a copy as well.My managed SQL is: [Microsoft.SqlServer.Server.SqlProcedure] public static void usp_Items_Select_Managed(SqlString table, SqlString name, SqlString value) { // sql StringBuilder stringBuilder = new StringBuilder(); stringBuilder.AppendFormat( "SELECT {0}.* FROM {0} WHERE {0}.{1} = {2}", table, col, value ); SqlConnection sqlConnection = new SqlConnection("context connection=true"); SqlCommand sqlCommand = new SqlCommand(stringBuilder.ToString(), sqlConnection); sqlConnection.Open(); SqlContext.Pipe.Send(sqlCommand.ExecuteReader()); sqlConnection.Close(); }Is there anything wrong with my Managed SQL, or is this just the way that it is?Thanks
View 1 Replies View RelatedHello ,
I have a SQL 2000 with Analysis server installed on it . Its in a different domain . When i am trying to register the server remotely i.e from another domain ,from another server it gives me an error that :
'Cannot connect to the repository .
Analysis Server : <Server_name>
Error : Cannot open database requested in Login '<Database_name > Login fails . Do you wish to register this server ? '
Both the domains are trusted . Except that the OS where the Analysis server is running is Windows 2000 . I am trying to connect through SQL 2000 Server with Windows NT 4.0 Server .
We have another Analysis server which is running but on Windows NT 4.0 OS where i can easily register that server .
I tried providing access with all the rights to concerned domains , but in vain .
I am exhausted trying to figure out the problem .
Any assistance in this regard would be of great help to me .
Thanks
Ravi .