Format / Alignment
Feb 20, 2007
Does anyone else have this issue?
When making a report with VS2005, things get spaced out wierd and dropped down when deployed to the web?
I can't get things like images to position properly. Does it have anything to do with the fact that I am using a Matrix?
For example, I create an image and embed it, I have it all the way to the left of the form and when deployed it is more towards the middle of the page?
Very frustrating, just wondering if anyone has any tips/solutions.
View 4 Replies
ADVERTISEMENT
Aug 20, 2007
Dear Friends,
my server is sqlserver 2005. iam writing sps in sql 2000 . if i open in sql 2005 the alignment of my sps is changed. i have changed the tab order of 2005 as equal to 2000.then also the problem comes. so plz give me solution to solve the problem.
View 1 Replies
View Related
May 14, 2007
After i upload the report to server , and try to convert it to excel, the alignment of report is out!!the width of columns is different with the width i set in design..=.= however, the report is pretty when i preview in reporting servcise design.
Anyone face same problem?
View 2 Replies
View Related
Aug 11, 2006
Hi there,
I'm using the SQL 2005 Express Edition and i would like to know if there's any way to change the Table alignment to Right To Left.
Please if you can, send me your reply to my E-Mail address: zaki666@zahav.net.il
Hope you can help me,
Isaac
View 1 Replies
View Related
Feb 26, 2007
Hi All,
I am working on a report, in this report a textbox is present, which is expected to show string. This string length is larger than what textbox can accommodate in single line. I want this textbox to show only right part of the string in case it can accommodate full string.
After using the right alignment I assumed it would do show, however it does not work like that. It always shows the left part of string in case, string is bigger than width of textbox.
Restriction from design:
1. Cannot increase the width of textbox.
2. Cannot use the Can Grow = true to show string in multiple lines.
Below is the example of my issue:
Say there is a string: "Microsoft SQL Server Reporting Services".
because the textbox width is not sufficient to see full string, I want to "Reporting Service". Which is of same size which column can accommodate. So I used Right alignment in textbox. however text box shows "Microsoft SQL Server". So, is there a solution to see required text in the textbox.
View 1 Replies
View Related
Jan 9, 2004
Greeting
I have more than one language installed on my computer, and I tried to use my Enterprise Manager yesterday... What Im getting is with all the GUI im using Im having everything is Right Aligned.....
Any help as to what I should change?
Thanks
This is my first post so would be great to have a qucik and handy answer :D
View 8 Replies
View Related
Feb 21, 2008
I am representing negative number within parenthesis , but as I am working on reporting service, it is possible to make the exact alignment of the number and parenthesis.
here is one example ....
when i format number with #,##,0;(#,##,0) i am getting output in a format in subsequent rows like
123,345
(145,567)
How can I make this alignment like
123,345
(145,567)
where the parenthesis will be outside the number space keeping in mind the alignment is in right .
any help will be apriciated.
thanks
Aru
View 1 Replies
View Related
Jun 7, 2007
I just can not understand why when I add text to a group header the report displays more group row space but when I export to excel the extra space disappears....
What the....Help Microsoft please explain...
Thank You...
View 1 Replies
View Related
Jul 27, 2006
i try to insert the following string in the database
the red car (driver)
this string save like this
)the red car (driver
i have a problem when inserting string contains special character at the end of the string.
we have arabic and english string like this
تعني شعاعي (R) radial كلمة
and it appear in reverse like this
كلمة (R) radial تعني شعاعي
View 5 Replies
View Related
Sep 22, 2007
Hi ,
Report when displayed in firefox browser the alignment is disturbed alot.
But when same report is viewed in IE browser its working fine.
Thanx in advance.
Thanks & Regards,
KK
View 3 Replies
View Related
Apr 1, 2015
I've yet to use partitioning in a production environment, and pretty much last ran any partitioning related code a few years back when looking at certification; so I'm definitely not an expert on the matter and only loosely clued up on the concepts.
I've recently started with a new employer, and they have just implemented a new system for sms messaging. The database tables tracking the sms messages being sent are going to get big and so they have created decided to implement partitioning on some of the tables using a partition scheme on the CreatedDate column; the DBA involved in designing the partitioning has left and I'm picking this up.
The relevant DDL for the table is below:-
CREATE TABLE [Message].[Sms](
[SmsId] [bigint] IDENTITY(250000001,1) NOT NULL,
[CreatedDate] [datetime] NOT NULL CONSTRAINT [DF_Sms:CreatedDate] DEFAULT (getdate()),
CONSTRAINT [PK_Sms:SmsId] PRIMARY KEY NONCLUSTERED
[code]....
There are some issues with the above that I will be addressing seperately (e.g. the clustered index should be unique as it contians the unique key, and the fillfactors are daft), but my concerns for this post are below.
1) How to define the Primary Key and enforce it's uniqueness whilst trying to ensure it's aligned with the partition in order to be able to switch out old data once an as yet undefined retention period has passed. In books online it states:- "If it is not possible for the partitioning column to be included in the unique key, you must use a DML trigger instead to enforce uniqueness. " Books online - Special Guidelines for Partitioned Indexes. However, I'm not sure what this means, nor how I create the primary key to use the partition function seeing as it doesn't have the CreatedDate in the unique key?
2) The original partition function was envisaged as the following:-
CREATE PARTITION FUNCTION [DateFunction](datetime) AS RANGE
LEFT FOR VALUES (N'2014-01-01T00:00:00.000'
, N'2014-04-01T00:00:00.000'
, N'2014-07-01T00:00:00.000'
, N'2014-10-01T00:00:00.000'
, N'2015-01-01T00:00:00.000'
, N'2015-04-01T00:00:00.000'
, N'2015-04-02T00:00:00.000'
, N'2015-04-03T00:00:00.000'
, N'2015-04-04T00:00:00.000'
, N'2015-04-05T00:00:00.000')
GO
There is a procedure that has been created and scheduled daily that will create a new partition for each day, and then merge these together at the end of the quarter. My understanding of partitioning is that this is a bad idea, as it will result in merging several populated partitions together. Is my understanding correct? If so, I'm planning on removing the day partitions at the end of the function, and simply adding quarterly partitions, maintaining a spare empty partition at the end of the table. Would this make more sense?
View 9 Replies
View Related
Jan 31, 2007
Can we have more than 2 parameters displayed in a single row on report (when browsed using web browser). The parameters BY DEFAULT - seems to be lined up in an array of 2 columns, and N rows - which gets frustrating because so much of space is left blank (gray space just left of <View Report> button and to the right of parameters line-up).
How can we have more than 2 parameters displayed in one single row ? As this will help the actual report content to take up more space on the screen than the parametes taking up almost 1/2 of the screen.
Thanks a bunch for ideas.
RJ
View 1 Replies
View Related
Apr 7, 2011
I understand that in 2008 server it'll align the disks for you automatically. I've run the following commands on another one of my DB servers and the offset was 1024 on all of them. I get the following from my other DB server and it doesn't list the alignment on every partition save the first one.
DISKPART> select disk 0
Disk 0 is now the selected disk.
DISKPART> list partition
Partition ### Type Size Offset
[code]....
Need to verify that all is fine with my file system or do I need to repartion everything? My DB servers are in a virtualized environment using EqualLogic and VMWare.There is always a way...
View 3 Replies
View Related
Mar 21, 2007
Relative newb to SSRS here, but the answer to this question evades me; answers and insight are appreciated.
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements.
This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope.
Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.
So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.
I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.
Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report. Does anyone have any insight?
Thank you for your time in reading this.
View 14 Replies
View Related
Mar 21, 2007
Report in question is an invoice form. It requires an absolutely bottom-of-page aligned footer that has databound elements. This is so that whatever page that footer finally appears on will print in such a way that the address will align in a windowed envelope. Ironically, Books Online gives this exact scenario in explaining headers and footers in SSRS, but they cleverly don't explain how an absolutely bottom-of-page-aligned and data-bound footer can be made to happen. Headers at absolute page top is obviously no problem. Footers at page bottom, not so much.So, this is not a "page footer"--page footers are employed in the body. Also this footer is databound, so a page footer as it's known in SSRS is out the window anyway.
Most of the time this will print on a single page, but if it breaks to multiple pages, that footer needs to go all the way to the absolute bottom.I grasp that the "report footer" for SSRS is just what appears at the end of any repeating controls that you've implemented in your body. Because SSRS uses this kind of repeating-control based idiom rather than a section-based idiom as Crystal does, this kind of (what I would consider very basic) positioning control is looking fairly impossible right now.Among what I've tried:
--Page footer (can't; databound)
--Specifying a page break after the pre-footer controls, and/or a page break before the controls that make up the footer in their properties. This leads to unpredictable results with blank printed pages (as many as 8 for what previews as a 2-page report, how silly is that?).
--Putting in a page-height rectangle as part of the footer (with and without the page breaks mentioned above), with the idea of forcing a basically blank page at the end of the report so that the footer will go to the bottom. SSRS will go ahead and break the page anyway on long elements like that, which again leads to the "footer" being printed in the middle or top of the final page, or whereever it happens to fall.
I may be having to explain to my client that you can't get there from here, and they may have to redesign their report.
View 13 Replies
View Related
Jun 29, 2015
I have question about tempdb needs to be configured 100GB 64kb block size.its fresh installation.
how to allocate the file sizes.still im not sure how many log files needs to be created with 100GB equals to 64KB block size.
what is 64KB block size and how to divide the logfiles 64KB into the 100gb or 50GB?
what is 64 KB cluster has 128 sectors?
tempdb drives should be formatted with a 64K allocation? how many files needs to created for good performance with 50GB or 100GB? ot 1TB
View 3 Replies
View Related
Jun 22, 2007
All,
I have a report that grows horizontally as it contains a matrix. In the header section of the report, I have items such as Title and time stamp in text boxes. How can I make these items align in the center if the report grows horizontally, it looks kinda odd with report title not being in the center? Any input will be appreciated.
Thanks.
View 1 Replies
View Related
Aug 19, 2015
I have created SSRS report which has many overlapping objects, the output in PDF format seems to good but in word format it is not giving the required output.
View 5 Replies
View Related
Nov 19, 2014
We are migrating data from old DB2 systems to sql server 2012, the DATE FORMAT in those systems is in decimal format with 7 digits. CYYMMDD format.
I need to convert this into DD/MM/YYYY format.
View 9 Replies
View Related
Jun 15, 2005
I have date coming to one page as a string in the following format"May 4 2005 12:00AM"
I need to query one of my tables using this date in combination of other nondate values. How can I convert this date into valid sql server datetime format before I query a database tables
Please help
View 3 Replies
View Related
Jun 4, 2015
I have a table which stores date-of-birth in varchar 19861231(yyyymmdd). A view takes this data. I want to store this date as mmddyyyy in the view. How can we achieve this?
View 18 Replies
View Related
Dec 19, 2007
Hi,
I have a set of csv files and a set of Format Specification files for each of the csv files. I need to convert the csv files into another format of csv files as specified in the Format Specification files. All the columns of the input csv files do not have a mapping with the columns of the output csv files. How can I achieve this using SSIS ? This is an urgent requirement. Please reply asap. Thanks.
View 1 Replies
View Related
Jun 16, 2006
Hello Expert!
I need help to I translate this data...
Table "LeaveDetail"
StaffNo | StartDate | EndDate | LeaveType |
1 | 23/04/2006 | 26/04/2006 | AL |
2 | 24/04/2006 | 25/04/2006 | MC |
3 | 26/04/2006 | 27/04/2006 | EL |
1 | 30/04/2006 | 02/05/2006 | EL |
Into this format...
|Apr|Apr|Apr|Apr|Apr|Apr|Apr|Apr|May|May|May|May|
StaffNo |23 |24 |25 |26 |27 |28 |29 |30 |01 |02 |03 |04..
---------------------------------------------------------
1 |AL |AL |AL |AL | | ... |EL |EL |EL |
2 | |MC |MC | | |
3 | | | |EL |EL |
Parameter:
Date From e.g. 23/04/2006 to 23/05/2006
Using only query statement...
Is this possible??
TIA
Regards.
View 7 Replies
View Related
Nov 16, 2006
Hi All,
I am stuck at one place, where I have to convert CSV format file data into SAP IDOC format file. In SSIS we don't have any such SAP adapter (though we have .NET Data Provider for mySAP suite [SSIS SAP Adapter] but this is still not fully supported by Microsoft, plus it doesn't have feature to convert data into IDOC format) that can do this. Can someone here please provide me some pointers on any third party adapters available in market to do this job or if anyone has already developed some custom approach to achieve this task?
Your quick response on this is highly appreciated.
Regards,
Kuldeep Chauhan
View 2 Replies
View Related
May 4, 2008
dear all can anybody help me soon....
i am using visual studio 2005 webapplication based on sql server 2005 database.
i can get one date from sql using one query.
I am selecting my field based on following code CONVERT(varchar, Oman.Positions.Datum, 9) AS LastUpdate
this case my output is May 4 2008 3:19:45:000AM.....
this output is correct but from this output i want to avoid millisecond part.
ie i want the output like May 4 2008 3:19:45 AM....
how i can do this
regards
View 4 Replies
View Related
Feb 1, 2008
E.g, i have a store procedure. The start date is long date (4/15/2007 3:00pm). i want to select the start date with a particular date (short date format 4/15/2006). Thanks in advance.
View 1 Replies
View Related
Nov 27, 2015
I have a table that has a DATE field named. AccountingDate that is in the format YYYY-MM-DD. It's not a VARCHAR field. I simply want to convert this date field into the format MM/DD/YYYY and call it New_Accounting_Date.
I've played with various combinations of CAST & CONVERT but haven't been able to get it to work.
Below is my latest effort which returns the error:
Incorrect syntax near the keyword 'as'
What code would work to return a MM/DD/YYYY value for New_Accounting_Date?
Select GLBATCH.AccountingDate,
convert(GLBATCH.AccountingDate as date),101) AS New_Accounting_Date
from GLBATCH
View 11 Replies
View Related
Nov 14, 2006
Hi
I am trying get my VB6 application to insert a record into a table (SQL Express) which has a datetime column but it would not process if the data format is differ to *American Date format*.
The date() function in VB returns 15/11/2006 which is in Australian Date format (DD/MM/YYYY) according to my setting in "Reginal and Lanuage Option-> Locale 0> English (Australia)" setting.
I get the following error:
Msg 242, Level 16, State 3, Server KITSQLEXPRESS, Line 1
The conversion of a char data type to a datetime data type resulted in an out-of-range datetime value.
The statement has been terminated.
My computer's locale is set to English (Australia) and I expect the datetime format would follow what is set in system locale
I've read an article somewhere on the net about how SQL 2005 eliminate the confusion of date conversion when read/write datetime records into a table...but it seems to me that it is still as in-flexible as MS Access
Is there a setting in the database that takes care of it?
Thanks
View 6 Replies
View Related
May 28, 2008
Hi,
I have a column date in my database which I should send it to Oracle database. The Date format in Oracle is number. I don’t know how should I convert the date to that format?
Example :
SQL FormatOracle Format
02/16/05 105046
Thanks.
View 6 Replies
View Related
Jun 9, 2006
hi siri have table hh .it has two columnsone is hhno is integer datatype another hhdoc is xml data type likehh tablehhno hhdoc---------------------------------------------------------------------------------------------100<suresh>sfjfjfjfjf</suresh>....................................101<ramesh>hhfhfhf</ramesh>..................................how to convert the xml data format into the general data format plshelp me with examples
View 1 Replies
View Related
Sep 27, 2006
Hi All, I have a serial number field in table. Field type is integer. It is just stored as 1,2,3,12,13, etc.It is showing as 00001,00002,00003,00012,00013 in interface. C# string format is very easy to changed the format.But when i export to excel there is a problem. Let me know how to format string in SQL and export to excel.ThanksAung
View 3 Replies
View Related
Jul 5, 2002
i am trying to bcp a data file to a sql table that have diffn formats. the conds are as follows -
1]the last 2 columns of the table need to be omitted
2]the first 2 fields of the data file correspond to the first 2 coulmns of the table and need to be imported
3]the last 2 fields of the data file need to be ommitted
the data in the txt file is as follows -
xxxxxxxx~xxxxxxxx~xxxxx~xxxxx
yyyyyyyy~yyyyyyyy~yyyyy~yyyyy
.....
the format file i use is -
7.0
4
1 SQLCHAR 0 32 "~" 1 C_ALIAS
2 SQLCHAR 0 254 "~" 2 C_DESC
3 SQLCHAR 0 0 "" 0 ENABLED
4 SQLCHAR 0 0 "" 0 SECNAME
5 SQLCHAR 0 0 "~" 0 c2_alias
6 SQLCHAR 0 0 "
" 0 C_DESC2
when i try to bcp data in using the format file i get error -
Unable to open BCP Host Data File
Can anyone tell me what i am doing wrong.
Thanks
View 1 Replies
View Related
Jul 11, 2003
This may be the wrong forum for this question. However, the question is, does any one have used sql server to provide output in CIF format?
Or more basic question, does anyone have worked with CIF file? Does anyone know how to generate the file automatically for sql query result?
Thanks
View 5 Replies
View Related
