Fresh SQL 2000 To SP4 Gives Error
Jan 5, 2007
Hi,
I'm trying to Service Pack 4 a fresh installation of SQL 2000 (a named instance called 'SQLSERVER2000') and get the error "Installation of the Microsoft Full-Text Search Engine package failed. (-2147467259) 0x80004005 Unspecified Error" towards the end of the process thus I cannot service Pack my fresh installation of SQL 2000. I have done this many times before on other machines, but its not working for me this time.
At http://www.dbforums.com/ ( http://www.dbforums.com/showthread.php?t=1198047 ) someone ran into this problem and mentioned to re-install Microsoft Full-Text Search. I have followed the article http://support.microsoft.com/kb/827449 but run into problems at step 2C. At step 2C it says to start the Microsoft Search service via the Services console, but Microsoft Search was nowhere to be found.
Going back a step to Step 2B it says that all registry keys that were previously-deleted are now available and the previously-deleted 'MSSearch' folder is recreated. I took a look, but both the keys and folder WERE NOT there.
It is a fresh OS installation of MS Windows 2003 Standard SP1, 768MB RAM and is running fine.
Can you please point me in the right direction here?
Brad.
View 3 Replies
ADVERTISEMENT
Apr 21, 2008
hello, what is the general consensus on installing SQL 2005. I usually run a backup of SQL 2000 dbs and then restore on SQL 2005 and change compatibility to 9.0. Is it the right way to upgrade? I'm only asking because I also did one db in-place to SQL 2005 and thought it went well until I browsed my system dbs. All of them are missing tables that usually appear in SQL 2005 system dbs. Other than that I haven't run into too many problems.
View 3 Replies
View Related
Jun 23, 2007
Hi everyone I have been trying hard to unserstand the way my isp does things sort of a communication gap I guess. The problem is I want to use the personal website... yes I know this is a SQL forum and that is what I am going to get at. I having a problems with the database aspect of the whole situtation, I can't creat a aspnetdb.mdf on their server because that name aready exists and I am assuming that it is the system and not a user that ows it. Also I can't name the other database personal.mdf either for the same reasons, so someone at the isp has had me creat a different name database during the install process of the application and that worked fine for a little while and now it does not work no more and I am getting old faster than I'd like. So here is my plan my plan is to wipe out the current database for the application on my workstation but first make a list of tables and then create a new database for that web application. So I ask is it feasible and what do I have to look out for and if it is not to much to ask what steps might take to accomplish such a task. I want to thank anybody that is willing to help me in this matter.
DKB
View 4 Replies
View Related
Oct 24, 2007
Can anybody provide me with the guidelines to install a fresh copy of SQL Server 2000 Enterprise Edition? The previous installation included a system account and it was on the same drive as the operating system. I remember reading this was not a good practice. Am I wrong?
thanks in advance
View 1 Replies
View Related
Apr 20, 2006
greets, im coding a few queries to a table. im storing sets of records into the table, each set of records will haev a different batch id. so basically 2 sets of records can occupy this table at the same time, and their batch id is the main key (with 2 other fields also being PKs). i want to compare the 2 sets in the same table and get the differences:
1. records that were added
2. records that were updated
3. records that were deleted
ive written queries for the added records, and the updated records but i cant get the query for finding deleted records. the logic looks good to me but im obviously missing something so i could use a fresh pair of eyes.
here is the table def:
Code:
CREATE TABLE [dbo].[UPCXREF_BATCH] (
[BATCH_ID] [char] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[CHAIN_CODE] [char] (5) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[UPC] [char] (16) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL ,
[ITM_CODE] [char] (6) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[ITM_CATEGORY] [char] (2) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[CREATE_DATE] [datetime] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[UPCXREF_BATCH] WITH NOCHECK ADD
CONSTRAINT [PK_UPCXREF_BATCH] PRIMARY KEY CLUSTERED
(
[BATCH_ID],
[CHAIN_CODE],
[UPC]
) ON [PRIMARY]
GO
and here are the queries ive gotten so far
Code:
/* This section retrieves all UPDATED records */
SELECT 'U' as FLAG, b2.CHAIN_CODE as CHAIN_CODE, b2.UPC, b2.ITM_CODE, b2.ITM_CATEGORY
FROM UPCXREF_BATCH b2 INNER JOIN UPCXREF_BATCH b1
ON b2.CHAIN_CODE=b1.CHAIN_CODE
AND b2.UPC=b1.UPC
AND (b2.ITM_CODE<>b1.ITM_CODE OR b2.ITM_CATEGORY <> b1.ITM_CATEGORY )
WHERE b2.BATCH_ID='BTC0002' AND b1.BATCH_ID='BTC0001'
/* This section retrieves all NEW records */
SELECT 'A' as FLAG, CHAIN_CODE, UPC, ITM_CODE, ITM_CATEGORY
FROM UPCXREF_BATCH
WHERE BATCH_ID='BTC0002'
AND (CHAIN_CODE NOT IN (SELECT CHAIN_CODE FROM UPCXREF_BATCH WHERE BATCH_ID='BTC0001')
OR UPC NOT IN (SELECT UPC FROM UPCXREF_BATCH WHERE BATCH_ID='BTC0001'))
here was my attempt to get deleted records which looks like it makes sense but isnt working
Code:
SELECT 'D' as FLAG, CHAIN_CODE, UPC, ITM_CODE, ITM_CATEGORY
FROM UPCXREF_BATCH
WHERE BATCH_ID='BTC0001'
AND CHAIN_CODE NOT IN (SELECT CHAIN_CODE FROM UPCXREF_BATCH WHERE BATCH_ID='BTC0002')
AND UPC NOT IN (SELECT UPC FROM UPCXREF_BATCH WHERE BATCH_ID='BTC0002')
here batch 'BTC0001' is the older set of records that already existed and batch 'BTC0002' is the new set we just inserted into the table. am i missing something else?
View 11 Replies
View Related
Oct 16, 2007
I have just completed a default install of MS SQL Server 2005 x64 edition on a 1 processor Quad core, 8GB, Windows Server 2003 Standard x64 R2 machine in an Active Directory Domain. It has 2 arrays configured with 2) 36Gb drives mirrored for the OS as C: and 3) 147Gb drives in a RAID5 array as E: drive.
I am simply the server guy who was asked to install SQL server for some projects in the future. The company will be bring in people to to the dev.
I wanted to setup the server as best as I can and so I've been searching around for "best practices" for fresh installs.
Anyone have any suggestions on things to configure/setup to improve the performance of the default install?
In addition, I want to redirect the databases to the E: drive and separate them from the OS drive (C:). Does anyone have any information on doing this? I have searched and found a few articles, but thought I would ask first.
It is probably noticeable that I have limited SQL configuration skills.
Thanks,
A simple IT guy trying to build a system right
View 4 Replies
View Related
Oct 15, 2007
Is it possible for SQL 2005 Express SP2 to ignore the UPGRADE parameter during a commandline install? We would like to use one commandline to handle both a fresh intstall and an upgrade depending on which is needed.
Does it make any difference which order the commandline parameters are used?
Do I need to write something to check if an upgrade or fresh install is needed and then feed the appropriate parameters?
Thanks
View 2 Replies
View Related
Aug 14, 2006
I am working as a consultant on a project to upgrade an Access 2000 db to SQL Server. My client has bought off on everything, and they're ordering a new dedicated box this week. They're getting a rackmount machine running Windows Server and SQL Server 2005.
My expectation was that their IT people would take care of administrative & security issues such as setting the machine up, installing & starting SQL Server and configuring the proper accounts. Suprisingly though, they're going to mount the machine in the rack, turn it on and let me do all of this.
I'm new at SQL Server, but I'm comfortable working with database objects (tables, views, etc...) I'm not so comfortable with the networking or administrative side of things. It took me a couple of hours to be able to connect to the DB on my desktop machine over my home network. You can see why I'm intimidated at the prospect of getting things integrated & running on a pretty large corporate network.
Maybe I'm overblowing this, but this just gives me the willies.
Are my fears justified? Am I going to be ok if I just follow the standard procedures for allowing TCP/IP connections to the server? Am I going to have to deal with firewalls? (I think I know the answer - "it depends on their network.." - that's what I'm scared of.. I don't know anything about their network, and I don't know enough about networking in general to figure things out..)
Are there any other best practices that I should follow for a fresh install?
View 2 Replies
View Related
Jan 14, 2004
I have done DTS that export data from SQL to .xls, it works perfect, my problem is my table from SQL get truncated everytime before i load data but my .xls file always come with previous records which I don't want. i.e. if my Sql table had 3 rows , when i finish to execute the dts, my .xls come with 3 rows, when I exec again, my table get truncated and my .xls add another 3 rows. How can I solve this
View 7 Replies
View Related
Jun 4, 2007
I have three tables:
Category: category id, category name, more…
Topic: topic id, topic name, category id, more…
Post: post id, post text, topic id, more…
I need help with a query to display the following:
Category name, # of topics, # of posts
Example:
Category.........................Topics.....Posts
SQL Stored Procedures.........12........562
It’s coming along but there are some problems, ASP.NET actually has 2 posts not 1. And the java totals are correct but it should be Java, 3, 10 (all in one line)
Category.....Topics...Posts
ASP.NET.........2........1
C#................1........1
Java..............1........1
Java..............1........2
Java..............1........7
Overview: use category id to get count of topics then use the topic id to get the count of posts.
SELECT C.CategoryName, T.ThreadCount AS Threads, T.PostCount AS Posts
FROM Category AS C LEFT OUTER JOIN
(SELECT tt.CategoryID, PostID.PostCount, COUNT(tt.ThreadName) AS ThreadCount
FROM Thread AS tt LEFT OUTER JOIN
(SELECT ThreadID, COUNT(PostID) AS PostCount
FROM Post AS P
GROUP BY ThreadID) AS PostID
ON tt.ThreadID = PostID.ThreadID
GROUP BY tt.CategoryID, PostID.PostCount) AS T
ON C.CategoryID = T.CategoryID
WHERE (C.CategoryID = T.CategoryID)
GROUP BY C.CategoryName, T.ThreadCount, T.PostCount
ORDER BY C.CategoryName
Thanks in advance
View 6 Replies
View Related
Sep 18, 2007
How do I go about if I want to capture a fresh copy of the stored procedure?
Nishi
View 5 Replies
View Related
Jun 4, 2015
I am using SQL Server 2012 Express.
I am doing performance tuning of SP/Query in Dev-Test environment.
I found that SQL Server caches plan between successive executions.
So if I test/execute SP 10 times, after 1st or 2nd execution, SQL server will pull-up plan-info from CACHE...Not from SQL SERVER Or Database...
Means i am not getting correct answer...
I found this 2 commands:
DBCC FREEPROCCACHE
DBCC DROPCLEANBUFFERS
But they say that executing above command might interfere/bother other people executing other query/sp on this server.
They also say that: Freeing the plan cache causes, for example, a stored procedure to be recompiled instead of reused from the cache. This can cause a sudden, temporary decrease in query performance.
Part of query was using Dynamic-SQL executed with EXEC command.
I replaced that with SP_EXECUTESQL.
How can I start testing of each SP-run with Fresh/Blank CACHE ?
View 1 Replies
View Related
Feb 22, 2008
Hi Everyone,
I was playing around with SQL2k5 Express, but decided to download Enterprise using my MSDN subscription. I installed it, but none of the services are running. I don't understand why?
I've checked the requirments and I notice that Vista x64 is not on the list for compatible OS's.
I do get this when trying to install:
- SQL Server Edition Operating System Compatibility (Warning)
Messages
SQL Server Edition Operating System Compatibility
Some components of this edition of SQL Server are not supported on this operating system. For details, see 'Hardware and Software Requirements for Installing SQL Server 2005' in Microsoft SQL Server Books Online.
Also, during the install, Componoents to Install: All the services are greyed out... is that because they can't be installed or because they're going to be installed by default?
Anyone else have it running on Vista Ultimate x64? Am I doing something wrong or does it just not install on this version of Vista?
Cheers,
Mike Avelar
View 6 Replies
View Related
Oct 31, 2007
New ssrs istall. I think they loaded sp2. It's a cluster, but ssrs was not clustered (I think)
When I attempt to open report manager, i just get
SQL Server Reporting Services
Home
with no option for creating a folder etc, like i have on development
When I attempt to deploy to ther server I get :
Deploying to http://amsqlclusterxx/reportserver/
Error rsItemAlreadyExists : The item '/Retailer' already exists.
How do I create an ssrs reports folder?
Also, and this is strange, but in vs.net I had to create a new shared datasource after removing the old one on the report with the same name. The report renders fine when I do an f5 pointing to a new datasource, but I no longer have the RUN "!" icon available while in the data tag to run my query. Why is this?
Thanks for any help or information.
View 1 Replies
View Related
Apr 10, 2007
I have a web application developed in VS.NET 2005 [using C# as code behind]; and it uses SQL Server 2000 Enterprise edition as backend.
The application runs fine, though it gives an error on IRREGULAR intervals on SQL data requests.
Error Details:
An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server)
My problem is this:
1) Why does it show an error of SQL 2005, while I use SQL 2000. SQL 2005 is not even installed on the server, though VS.NET 2005 is installed.
2) The error comes only at irregular intervals. Users are able to login properly otherwise.
3) Application starts working again if we do either of the following: (a) Restart IIS (b) Restart application pool (c) Restart server.
4) Named pipes and TCP/IP are added to the "Network Configuration" of the SQL server 2000.
5) Error does not come on any specific page; or any specific code; or at any specific time.
6) We do not have any background service or any other activity happening on the server; and the server hosts only this application, within a single virtual root.
Any thoughts on why is this happening, and how to resolve this?
View 10 Replies
View Related
Jan 7, 2008
Hello,
I am applying hourly differential backup to the backup server from production with the following command. This command makes the database on standby server into read only mode.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
Now I want to run a command which will put the database in write mode. I have created a job which would make the datbase Write mode. This job runs successfully sometimes and fails sometimes. I need to ensure that the job always succeeds. When it fails, how do I troubleshoot and what is the possible fix?
Thanks in advance.
The error message is
Cannot apply the backup on device 'E:SQL backup from productionSQL daily diff back up' to database 'ARSYSTEM'. [SQLSTATE 42000] (Error 3136) RESTORE DATABASE is terminating abnormally. [SQLSTATE 42000] (Error 3013). The step failed.
The steps for the job are as follows with the failing step highlighted in bold.
copy /y "\172.31.9.12Remedy BackupackupSQL backupsql_full_backup" "E:SQL backup from productionsql_full_backup"
copy /y "\172.31.9.12Remedy BackupackupSQL backupSQL daily diff back up" "E:SQL backup from productionSQL daily diff back up"
xp_cmdshell 'net stop "bmc remedy action request system server"'
exec rp_kill_db_processes 'ARSYSTEM'
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
NORECOVERY
Failing step
RESTORE DATABASE ARSYSTEM
FROM DISK = 'E:SQL backup from productionSQL daily diff back up'
WITH
MOVE 'arsystem' TO 'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
RECOVERY
xp_cmdshell 'del /f "E:SQL backup from productionsql_full_backup"'
xp_cmdshell 'del /f "E:SQL backup from productionsql daily diff back up"'
xp_cmdshell 'net start "bmc remedy action request system server"'
I have scheduled the following hourly diffential restore job too which never fails.
RESTORE DATABASE ARSYSTEM FROM DISK = 'E:SQL backup from productionsql_full_backup'
WITH MOVE 'arsystem' TO
'd:ardataarsystem.mdf' ,
MOVE 'arsystem_log' TO 'D:ARLOGARsystem' ,
STANDBY = 'E:SQL backup from productionSQL daily diff back up'
EXEC MASTER..XP_CMDSHELL 'del /f "E:SQL backup from productionSQL daily diff back up"'
View 12 Replies
View Related
Jul 13, 2006
Our SQL Server 200 box is getting perflib errors when we get a decentamount of people using an application that I wrote, call queue system,web based. To accomplish a queue type system on a button push I wrotea query like this...BEGIN TRANSACTION;Select top 1...fields here...FROM table with (xlock,readpast)(2 joins)WHERE numerous where clausesORDER BY 2 order bys.Now our sql server starts timing out..then in the app log this showsup....Error: 1203, Severity: 20, State: 1Process ID 62 attempting to unlock unowned resource PAG: 6:1:126407.For more information, see Help and Support Center athttp://go.microsoft.com/fwlink/events.asp.The reason I am doing xlock is to make a record not viewable to 2people if they click the button on the web form that runs the abovequery within the same minute, they would get different records....So to avoid this error which I assume is due to my xlock should Irethink my query?
View 3 Replies
View Related
May 2, 2007
We have a stored procedure that calculates the floor nr for users at our company campus using their office location. The calculation is done by a function that returns an integer. Unfortunately, not all users enter their information correctly so the function sometimes raises an error. Below is the code of that stored procedure.
UPDATE PERSONS
SET FLOORNR = dbo.FloorNR(OFFICELOCATION)
WHERE OFFICELOCATION IS NOT NULL
IF(@@ERROR <> 0 OR @@ROWCOUNT = 0)
BEGIN
RAISERROR ('Failed to calculate the floor number', 16, 1 ) with nowait
END
However, when the function dbo.FloorNR fails, it doesn't raise our error, but it seems to raise the error that comes from dbo.FloorNR.
How can we catch errors that come from dbo.FloorNr so that we can raise our own error? Our company still uses SQL 2000, so we cannot use the SQL 2005 try/catch option.
View 3 Replies
View Related
Oct 23, 2007
Hi
I'm trying to finish a DTS Package by controlling the error flow with @@ERROR.
Yet, there's one error which I can't seem to capture
'Syntax error converting the varchar value to a column of data type int'
If you try the code below, I can't seem to pull an @@ERROR ID from it.
IF
OBJECT_ID('tempdb..##LogTemp') IS NOT NULL
BEGIN
DROP TABLE
##LogTemp
END
CREATE TABLE
##LogTemp
(
Error_ID INT
)
INSERT INTO ##LogTemp
(
Error_ID
)
VALUES
(
'Test'
)
PRINT @@ERROR
Query Analyzer prints this out:
Server: Msg 241, Level 16, State 1, Line 83
Syntax error converting datetime from character string.
View 7 Replies
View Related
Jun 21, 2001
I upgraded a SQL 6.5 NT 4.0 server to SQL 2000 sp1. I successfully upgraded the databases and everything appeared to be working properly. When I attempted to create a backup device the Enterprise Manager MMC seemed to freeze and would not respond. I closed EM and tried to reopen. I get an error box that states "Snap-in failed to initialize. Name: Microsoft SQL Enterprise Manager CLSID:{00100100-1816-11D0-8EF5-00AA0062C58F}".
I have tried loading a generic MMC console and adding the EM snap-in, same error. I have reloaded the NT SP5. I have rebuilt the registry and tried reinstalling the SQL 2000 sp1. Nothing seems to work.
Any ideas?
Thanks in advance
Janet
View 3 Replies
View Related
Sep 13, 2004
Hi
Some times I get this eeror when I want open my web pages
what is this?
=========
Microsoft OLE DB Provider for SQL Server error '80004005'
[DBNETLIB][ConnectionOpen (Connect()).]SQL Server does not exist or access denied.
/common.asp, line 260
=========
note: some times I get this error
I installed SQL on my system
My web site is in ASP
thanks
View 2 Replies
View Related
Mar 5, 2007
Facts:1. I am using my account on Godaddy trying to connect to my sql server db.2. I can get into my db using user id and password.3. Godaddy's help file shows this for a connection string: connectstr = "Driver={SQL Server};SERVER=" & db_server & ";DATABASE="
&db_name & ";UID=" & db_username & ";PWD=" &
db_userpassword4. My connection string: "Server=whsql-v09.prod.mesa1.secureserver.net;uid=dbasolutions;pwd=***;database=DB_87972;" & _ "Trusted_Connection=False providerName=System.Data.SqlClient"{password **** out}5. Get error message An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: Named Pipes Provider, error: 40 - Could not open a connection to SQL Server) I tried to email Godaddy's help desk with this information. There first response: We do not allow remote connections to our sql server database.There second response was to read the help file!Does anybody have any suggestions? Thanks in advance,bswanson
View 1 Replies
View Related
Aug 12, 2007
I am using Visual Studio 2005 with SQL Server 2000. I'm having an issue where I can build my website just fine for long periods of time, and then for what appears to be no reason, my site errors out when trying to connect to the database with the message below -- the thing is I don't want to use a SQL Server 2005 database, nor do I have Server 2005 or Server Express loaded. How can I unhook this and make it use SQL 2000?"An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings SQL Server does not allow remote connections. (provider: TCP Provider, error: 0 - No connection could be made because the target machine actively refused it.) "
View 5 Replies
View Related
Sep 11, 2007
I am trying to connect to a sql 2k database using a Microsoft Application block. I get the following error. It is saying about 2005, I verified that SQL 2K is running on the server.
System.Data.SqlClient.SqlException: An error has occurred while establishing a connection to the server. When connecting to SQL Server 2005, this failure may be caused by the fact that under the default settings
Any help will be appreciated.
View 5 Replies
View Related
Nov 28, 2007
select ZT_AuthDetail
Where MasterKey in (select * from ZT_AuthDetail d, ZT_AuthMaster m where (ReplyTime Between '2004/11/22' and '2004/12/31') And (m.CustId = '33196700') And (m.Prikey = '1840'))
when I run this query , the error message shows somethins wrong with "Sub Query from Exists....."
if I run (select * from ZT_AuthDetail d, ZT_AuthMaster m where (ReplyTime Between '2004/11/22' and '2004/12/31') And (m.CustId = '33196700') And (m.Prikey = '1840')) alone
the result is fine and Ok.. but with select ZT_AuthDetail where MasteKey in... I got error message
can you please tell me why and how to fix it?
** I use SQL2000
thank you very much
View 2 Replies
View Related
Feb 13, 2008
Hi i need help.,What does this error means and what should i do to fix it.BTW. i made a data driven site, using Visual Web Dev 2008, and i used the Sql Server 2000 enterprise all in the same PC, when i run it in my IIS also in the same PC, this error apear, please help me.thanks
Server Error in '/' Application.
Login failed for user 'P078731ASPNET'. Description:
An unhandled exception occurred during the execution of the current web
request. Please review the stack trace for more information about the error and
where it originated in the code. Exception Details:
System.Data.SqlClient.SqlException: Login failed for user
'P078731ASPNET'.Source Error:
Line 2679: this.Adapter.SelectCommand = this.CommandCollection[0];Line 2680: Red.acoDataTable dataTable = new Red.acoDataTable();Line 2681: this.Adapter.Fill(dataTable);Line 2682: return dataTable;Line 2683: }Source File:
c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET
Files
oot9c387db932ec7141App_Code.v1ipo9zs.0.cs Line: 2681
Stack Trace:
[SqlException (0x80131904): Login failed for user 'P078731ASPNET'.] System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection) +800131 System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj) +186 System.Data.SqlClient.TdsParser.Run(RunBehavior runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj) +1932 System.Data.SqlClient.SqlInternalConnectionTds.CompleteLogin(Boolean enlistOK) +33 System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, Boolean ignoreSniOpenTimeout, Int64 timerExpire, SqlConnection owningObject) +172 System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(String host, String newPassword, Boolean redirectedUserInstance, SqlConnection owningObject, SqlConnectionString connectionOptions, Int64 timerStart) +381 System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(SqlConnection owningObject, SqlConnectionString connectionOptions, String newPassword, Boolean redirectedUserInstance) +181 System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, Object providerInfo, String newPassword, SqlConnection owningObject, Boolean redirectedUserInstance) +173 System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection) +357 System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnection owningConnection, DbConnectionPool pool, DbConnectionOptions options) +30 System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject) +424 System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject) +66 System.Data.ProviderBase.DbConnectionPool.GetConnection(DbConnection owningObject) +494 System.Data.ProviderBase.DbConnectionFactory.GetConnection(DbConnection owningConnection) +82 System.Data.ProviderBase.DbConnectionClosed.OpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory) +105 System.Data.SqlClient.SqlConnection.Open() +111 System.Data.Common.DbDataAdapter.FillInternal(DataSet dataset, DataTable[] datatables, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior) +121 System.Data.Common.DbDataAdapter.Fill(DataTable[] dataTables, Int32 startRecord, Int32 maxRecords, IDbCommand command, CommandBehavior behavior) +162 System.Data.Common.DbDataAdapter.Fill(DataTable dataTable) +107 RedTableAdapters.acoTableAdapter.GetData() in c:WINDOWSMicrosoft.NETFrameworkv2.0.50727Temporary ASP.NET Files
oot9c387db932ec7141App_Code.v1ipo9zs.0.cs:2681[TargetInvocationException: Exception has been thrown by the target of an invocation.] System.RuntimeMethodHandle._InvokeMethodFast(Object target, Object[] arguments, SignatureStruct& sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +0 System.RuntimeMethodHandle.InvokeMethodFast(Object target, Object[] arguments, Signature sig, MethodAttributes methodAttributes, RuntimeTypeHandle typeOwner) +72 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture, Boolean skipVisibilityChecks) +308 System.Reflection.RuntimeMethodInfo.Invoke(Object obj, BindingFlags invokeAttr, Binder binder, Object[] parameters, CultureInfo culture) +29 System.Web.UI.WebControls.ObjectDataSourceView.InvokeMethod(ObjectDataSourceMethod method, Boolean disposeInstance, Object& instance) +480 System.Web.UI.WebControls.ObjectDataSourceView.ExecuteSelect(DataSourceSelectArguments arguments) +1960 System.Web.UI.WebControls.ListControl.OnDataBinding(EventArgs e) +92 System.Web.UI.WebControls.ListControl.PerformSelect() +31 System.Web.UI.WebControls.BaseDataBoundControl.DataBind() +70 System.Web.UI.WebControls.BaseDataBoundControl.EnsureDataBound() +82 System.Web.UI.WebControls.ListControl.OnPreRender(EventArgs e) +26 System.Web.UI.Control.PreRenderRecursiveInternal() +86 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Control.PreRenderRecursiveInternal() +170 System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) +2041
Version Information: Microsoft .NET Framework Version:2.0.50727.1433;
ASP.NET Version:2.0.50727.1433
View 3 Replies
View Related
Jun 21, 2004
Hi
I just installed SQL Server 2000 EVAL ver, in my Win XP Pro machine and the installtion was succesful though I get the following error once I run the code.
What does this mean ? What should I do here ?
----------------------------------------------------------------------
[SqlException: Login failed for user 'sa'. Reason: Not associated with a trusted SQL Server connection.]
System.Data.SqlClient.ConnectionPool.GetConnection(Boolean& isInTransaction) +472
System.Data.SqlClient.SqlConnectionPoolManager.GetPooledConnection(SqlConnectionString options, Boolean& isInTransaction) +311
System.Data.SqlClient.SqlConnection.Open() +383
ASP.DropDownList_aspx.Page_Load() +61
System.Web.Util.ArglessEventHandlerDelegateProxy.Callback(Object sender, EventArgs e) +10
System.Web.UI.Control.OnLoad(EventArgs e) +55
System.Web.UI.Control.LoadRecursive() +27
System.Web.UI.Page.ProcessRequestMain() +731
View 6 Replies
View Related
Oct 19, 2001
I am testing SQL Server 2000 and after having installed it on a machine with SQL 7 already on it everything went OK.
However, if I try to create a DTS package (or open and existing one) on either of my SQL Server instances I get a "DTS Designer Error". After which, the DTS package window opens but I can't see any of the tasks in the tool bar. I can't select any tasks from the Task option in the menu bar either.
Has anyone experienced anything similar? Any suggestions would be appreciated.
Thanks.
Barb
View 2 Replies
View Related
Oct 9, 2000
I am testing SQL Server 2000 and after having installed it on a machine with SQL 7 already on it everything went OK.
However, if I try to create a DTS package (or open and existing one) on either of my SQL Server instances I get a "DTS Designer Error". After which, the DTS package window opens but I can't see any of the tasks in the tool bar. I can't select any tasks from the Task option in the menu bar either.
Has anyone experienced anything similar? Any suggestions would be appreciated.
Regards,
Karl
View 1 Replies
View Related
Jul 13, 2001
I stopped and started SQL Server this morning and got this error message in the NT EVent log and SQL log (SQL 2000 SP1)
Supersocket info: Bind Failed on TCP port 1433. This error is new, it was not there in previous starts of SQL Server 2000, Any ideas? thx in advance
View 3 Replies
View Related
Aug 13, 2004
HELP
I'm trying to add the new record to the database, but got the error from IE.
HTTP 500 - Internal server error
Internet Explorer
How can I add my info to my company SQL Sever 2000???
Following is my code:
<%
Dim sql
Dim objConn
Set objConn = Server.CreateObject("ADODB.Connection")
objConn.Open "Provider=Microsoft.Jet.OLEDB.4.0;" & _
"Data Source=c:InetPubwwwrootdalyfpdbmarket.mdb"
sql="INSERT INTO Attendees (AttendeeFirstName,AttendeeLastName)"
sql=sql & " VALUES "
sql=sql & "('Saleng', 'Teng')"
objConn.Execute sql
objConn.close
%>
Thanks for your help.
scn@daly.com
View 1 Replies
View Related
Jan 25, 2007
I'm attempting to configure log shipping on 2 servers with SQL Server 2000 sp4 Enterprise Edition. I keep getting the following error when the job attemtps to execute.
Error 14261: The specified primary_server_name.primary_database_name('C')
already exists.
I have tried this KB http://support.microsoft.com/kb/298743 and i got the same error again!
Please HELP!
View 3 Replies
View Related
May 9, 2007
Hi,
I have a question to the SQL Server experts.
I have a kind of problem with an system that is trying to modify some records in a SQL Server 2K Database.
Server configuration:
Windows Server 2003 Standard Edition
MDAC 2.81 SP2
SQL Server 2000 SP3
The error that I receive is:
Description [Timeout expired], NativeError [0] SQLState [HYT00], Source [Microsoft OLE DB Provider for SQL Server], Number [-2147217871]
It happens when I try to execute a store procedure that updates a record and is just with that procedure, there's no error when I execute procedure to insert rows.
I would feel so much thankful about any suggestions.
View 9 Replies
View Related
