I have SQL Server 7.0 installed in a Fail-over cluster and currently, Full-text indexing is not installed, since our full-text index resides on a different physical server. In an attempt to consolidate our servers I am looking at installing full-text indexing on our cluster. I understand that there will probably be issues getting the Full-text indexing service to fail-over, but I'm not too concerned with that.
What I am concerned with, is, will I need to re-install the latest SQL Server 7.0 service pack? Does anyone know of any security holes with an un-patched version of the full-text indexing service?
Any advice on this situation is greatly appreciated. Thanks!
I am using the following plumbing code to search a database column for a keyword. I can't use full-test indexing so I came up w/ this work around. But It has many flaws so I'm looking for a better way. Thx in advance.
'Open sql connection SqlConnection1.Open()
Dim datareader2 As SqlClient.SqlDataReader datareader2 = cmdFindRowsWithKeyword.ExecuteReader Dim strMsg As String Dim intRowToFlag As Integer Dim strRowsToGet As String Dim strKeywordAsTyped As String Dim strKeywordAllCaps As String Dim strKeywordAllLower As String Dim strKeywordFirstLetterCap As String Dim FirstLetter As String
'Assign keyword as typed to variable strKeywordAsTyped = txtSearchFor.Text 'Assign keyword as typed to variable then convert it to all uppercase strKeywordAllCaps = txtSearchFor.Text strKeywordAllCaps = strKeywordAllCaps.ToUpper 'Assign keyword as typed to variable then convert it to all lowercase strKeywordAllLower = txtSearchFor.Text strKeywordAllLower = strKeywordAllLower.ToLower 'Assign keyword as typed to variable then convert it so just the first letter is in uppercase strKeywordFirstLetterCap = txtSearchFor.Text FirstLetter = strKeywordFirstLetterCap.Chars(0) FirstLetter = FirstLetter.ToUpper strKeywordFirstLetterCap = strKeywordFirstLetterCap.Remove(0, 1) strKeywordFirstLetterCap = strKeywordFirstLetterCap.Insert(0, FirstLetter)
'If the string contains the keyword as typed in all caps all lowercase or w/ the 1st letter in caps then flag that row. If strMsg.IndexOf(strKeywordAsTyped) <> -1 Or strMsg.IndexOf(strKeywordAllCaps) <> -1 Or strMsg.IndexOf(strKeywordAllLower) <> -1 Or strMsg.IndexOf(strKeywordFirstLetterCap) <> -1 Then
cmdFlagRowsWithKeyword.Parameters("@recid").Value = intRowToFlag SqlConnection2.Open() Dim datareader3 As SqlClient.SqlDataReader datareader3 = cmdFlagRowsWithKeyword.ExecuteReader datareader3.Close() SqlConnection2.Close()
full text indexing Hi, In SQL Server 2005, if I set full text indexing enables in column MyDesc and 1. use “Select * from MyTable where MyDesc LIKE ‘%abc%’� would this be using full text indexing? Or have to use Contains to get it be in use? 2. Once I create the full-text index, should I be setting it to populate periodically? Isn’t it populating itself?
right-click do on database and selected properties,selected files page check box "use full-text indexing" is disable. how can enable check box above for sql server 2005 on windows xp? thanks,mohsen
How might it be possible to have on the fly full-text indexing utilizing the FREETEXT and CONTAINS statements so that when I enter a piece of data into the database it is immediatly searchable using the full-text indexing features?
Hello,I wanna learn Full Text Indexing feature in MS SQL, Please let me know where could i have a good resource about it. I tried google but i didnt find what i need.regards
Recently the full text catalogs no longer work on my sql server. We have tried a lot of different things to get them working and all have failed. I am totally at a loss. The service is running under the local admin and the local admins have sysadmin permissions. We have removed the catalogs and re-added them. We have removed the catalogs changed the DB to disable full text indexing. Checked the registry for the left over entries. Run sp_fulltext_service 'clean_up'. We have tried many difference combinations and tried restoring from backup. Nothing works. If anyone has ANY ideas I would greatly appreciate the help. We are running SQL 7.0 with SP3.
I have a SQL Server Instance on my workstation (Windows XP Pro) I'm trying to use the Full Text Indexing - but the stupid thing is greyed out in my enterprise manager. Any one know anything I can try?
I have a table of product inventory I want to be able to search using the CONTAINS and/or FREETEXT functions. There are actually 4 columns I want to be searchable: brand, product name, etc. Since the table can have only one full-text index, should I just define an index on all 4 columns? It would be large in relation to the table, but the table itself is small (~600 rows). The index would not exceed the 900 byte limit.
Will this give me problems in terms of workability or performance? Is there a better approach? I could also just use LIKE searching, but it's significantly less sophisticated.
Hi, I am working on programming a knowledge base using ASP and MS SQL and we're running into the problem of how to search it... In that past we've just had a type of like statement... but this isn't really a search function and isn't really doing the trick...
So, what I'm thinking is that we might be able to use the full-text indexing service on Microsoft SQL server and then somehow search the full-text index from an ASP page and then procede with the db interface from there.
Are there better ways of searching MS SQL databases which I'm not aware of? Is it possible to access the full-text index from an ASP page and how would you do this? Are there documents that people could recommend on how to setup full-text indexing on MS SQL Server?
Hello,Is there a query or a method that can return the list of all theindexed words in a column that has been full-text indexed in sqlserver 2000? I need to get the words returned above in aContainstable[] query on another column to get a rank that can suggesta degree of similarity between the two.Thanks,J
I am using sql server express edition and when i try to apply full text indexing on the table - the setting is set to "NO" and i am unable to set it to Yes please advise - thanks Jeff
Trying to make a full-text table of a few tables in SQL server 2000 using the SQL Server Managment Studio. I am getting the following error when I then try to view the columns using the table. The column it is having a problem with is just a varchar text column. I have tried a few different tables and each time it has a problem with one of the columns. It does not give me an error when creating the full-text table. Anyone have any information on this? I check on a full text table I made a while ago and it is giving me the same error but searches on it seem to be working, but cannot tell if it is using the one column it is having an issue with.
Property TypeColumnName is not available for FullTextIndexColumn '[MyColumnName]'. This property may not exist for this object, or may not be retrievable due to insufficient access rights. (Microsoft.SqlServer.Smo)
I´m trying to enable full-text indexing in SQL Server Management Express 2005. I can see the option is there (Database name - Properties - Files), but the options is blurred and I´m not able to select it. How do I solve this problem? Getting desperate trying now...
I'm about to deploy full-text searching to complement ASP.NET/C#.NET. I unfortunately have not had much experience in Full-Text Indexing...
I will be creating catalogs for each table in the database (end-users pretty much require that we are able to search by anything). I see that there is a catalog population schedule...typically, what is the best practice for updating the catalogs? The database entries will most likely be updated frequently, as it contains the end-users curriculum vitae. Would once a day, say midnight, be a sufficient schedule?
And also, as it pertains to best practices, is the method I am applying the best way to do this (a catalog per table)...I have about 30 tables in a relational model...is there a better way to catalog the entire thing instead of table by table?
I was trying Full text indexing on my database. it seems to work fine on all databases except one. On one particular database it returns '0 results' immediately even though the table has a large number of records. The search returns just fine if tried on the same table on a different database on a different server.
Does anyone have a faintest clue as to what could be wrong ? please reply ASAP.
I am having a few tables in my database on which I am implementing FullText Searching. As the tables are huge, full population of the catalog takes a lot of time. I want to go for incremental population but I did not have a timestamp column for this purpose when I initially designed the database. Is there any way to ensure incremental population without the timestamp column? Because of the design constraints I do not like to have a timestamp column and would like to avoid it if it is possible. But with out that SQL performs a full population and it is taking more than two hours now for full population and I also have several databases on which I have to do the same but the structure is more or less the same. What are the performance issues when users are accessing the database when full text catalog population is in progress?Does it slow down reads and writes?It is a web based application for the internet catalog for industrial suppliers and needs to be online with no performance degradation. Any help and info on this is greatly appreciated.
I'm attached to two different SQL 7 servers and neither one has the options enabled for full-text indexing. I am the DBO for those databases and the services are running.
Any ideas what's missing? I'm using SQL 7 clients tools on my NT Workstation.
Also, are there samples of using the index/search within ASP?
I've created a Full-Text index on a table using Enterprise Manager. I've followed all of the steps outlined in BOL but I can't seem to get it to populate. Any ideas on what I'm doing wrong.
I am using full text indexing to index an image column where I am storing HTML documents. Currently I have an extra column in my table storing the file extension (htm) so the indexer knows which filter to use for every row.
HTML is the only format I'll be indexing, so is there a way for me to set this somewhere else so I don't have to have a column full of htm values - this seems really wasteful, those htm's add up when there are millions of rows...
If I have a table which has multiple child rows in another table, how I can index both tables to search the parent row, and all child rows in one go for a given term?
Hi,Just found out that this error can be solvedServer: Msg 7619, Level 16, State 1, Procedure usp_ft, Line 2A clause of the query contained only ignored words.triggered when executingSELECT TOP 1000 * FROM ADS JOIN ADSFULL ON ads_adid = fads_adidWHERE (ADS_ADID IN (SELECT FADS_ADID FROM ADSFULLWHERE (CONTAINS(*, '"opel" AND "and" AND "astra"'))))can be solved by changing the language specific file with noise words ...but that's not really an option in our server configuration.Now I wondered is there a way to query via TSQL a list of the noisewords ...so I can exclude them before parsing the query??I also dedected I can not catch the error in my stored procedure with theinstruction IF @@error ... So is it true that I can only handle this errorin my client software that calls the stored procedure??Thanks a lot.--Kind regards,Perre Van Wilrijk,Remove capitals to get my real email address,
Hello,I am learning SQL Server 2005 Expres Edition. I need to create fulltext index on Books.Remarks column in my database. I tried:CREATE FULLTEXT CATALOG FTC_Books AS DEFAULTCREATE FULLTEXT INDEX ON Books (Remarks) KEY INDEX IX_Books_Remarks ONFTC_BooksUnfortunately I got error:Full-Text Search is not installed, or a full-text component cannot beloaded.I don't understand this because I marked all options during setup.Please help/RAM/
I have been trying to set up full-text indexing. All the CONTAINS searches, however, always returns 0 row. It seems the index is always empty. Could you please help figure it out?
Here is how I created the full-text catalog and index:
CREATE FULLTEXT CATALOG ft_catalog AS DEFAULT; CREATE FULLTEXT INDEX kb(title, body) KEY INDEX PK_kb WITH CHANGE_TRACKING AUTO;
Then from the full-text crawl log, I found
2006-05-06 10:59:15.14 spid15s Error '0x80040e09' occurred during full-text index population for table or indexed view '[dbs].[abc].[kb]' (table or indexed view ID '2073058421', database ID '5'), full-text key value 0x00000007. Attempt will be made to reindex it. 2006-05-06 10:59:15.14 spid15s The component 'sqlfth90.dll' reported error while indexing. Component path 'C:Program FilesMicrosoft SQL Server90COMsqlfth90.dll'. 2006-05-06 10:59:15.14 spid15s Informational: Full-text retry pass of Full population completed for table or indexed view '[abc].[dbo].[kb]' (table or indexed view ID '2073058421', database ID '5'). Number of retry documents processed: 4. Number of documents failed: 4. 2006-05-06 10:59:15.14 spid15s Changing the status to MERGE for full-text catalog "ft_catalog" (7) in database "abc" (5). This is an informational message only. No user action is required.
I tried to find if the index contains anything. 0 is returned from the following query.
Hi, I am using SQL SERVER 2005 Express. I am trying to set up Enable a Table for Full-Text Indexing. I am following these instructions: How to: Enable a Table for Full-Text Indexing (SQL Server Management Studio)
I am following the how to in the sql studio management express and for text indexing it says
================================================ To enable a database for full-text indexing
In Object Explorer, expand the server group, right-click the database for which you want to enable full-text indexing, and then select Properties.
Select the Files page, and then select Use full-text indexing This worked ok ==================================================
next it says to
================================================== To enable a table for full-text indexing
Expand the server group, expand Databases, expand User Databases, and expand the database that contains the table you want to enable for full-text indexing.
Right-click the table that you want to enable for full-text indexing.
Select Full-Text index, and then click Enable Full-Text indexing.
in object explorer ,do right-click on database and is selecting preoperties and is selecting "files" page "use full-text indexing" ckeck box is disable. how can enabled this check box? thanks , mohsen
