Function With Unlimited Parameters
Aug 17, 2006Is there any way to write procedure with ulimited number of parameters?
Like in COALESCE function. You can pass one or more parameters.
ADVERTISEMENT
Passing Parameters To LIKE Function
Jul 22, 2007Hi,I want to pass parameter in to LIKE functionIs there anyway to do thatThanks,Janaka
View 6 Replies View RelatedFunction With Optional Parameters
Jan 19, 2008Hi, I wish to create a user defined funtion in sqlserver2005 with optional parameter list. So at the time of function calling the parameters should be a optional one. How can i do this? please help me .
View 2 Replies View RelatedAdd Temp Parameters To A Function
May 4, 2006I am writing a set of functions and then a stored procedure to allow me to view some data in Reporting Services. I have written the first part of the function as shown ;
set ANSI_NULLS ON
set QUOTED_IDENTIFIER ON
GO
ALTER FUNCTION [dbo].[fnWTRTerrierData]
(@vch_site_ref nvarchar (3), @dt_src_date datetime)
RETURNS @WeeklyTerrierRSPI TABLE
(Areacode varchar(2),siteref nvarchar(3),
estatename nvarchar(100), Securitised nvarchar(255),
unitref nvarchar(15), unittype nvarchar(30),
unittype_count int, tenantname nvarchar(100),
tenantstatus nvarchar(25), tenantstatus_count int,
unitstatus nvarchar(15), unitstatus_count int,
floortotal float, floortotocc float,
initialvacarea float, initialvacnet float,
TotalRent float, NetRent float,
FinalRtLsincSC float, DiscEndDate datetime,
ErvTot float, Leaseterm int,
leasestart datetime, rentreview nvarchar(255),
leaseend datetime, breakclause datetime,
tenancyterm datetime, landact nvarchar(255),
datadate datetime)
AS
BEGIN
INSERT @WeeklyTerrierRSPI
SELECT Areacode, siteref, estatename, Securitised, unitref, unittype, unittype_count, tenantname,
tenantstatus, tenantstatus_count, unitstatus, unitstatus_count, floortotal, floortotocc,
initialvacarea, initialvacnet, TotalRent, NetRent, FinalRtLsincSC, DiscEndDate, ErvTot,
Leaseterm, leasestart, rentreview, leaseend, breakclause, tenancyterm, landact, datadate
FROM dbo.src_terrier
WHERE (datadate = @dt_src_date) AND (siteref = @vch_site_ref)
RETURN
END
I have then written a stored procedure which picks up the result set from the function and ultimately will deliver it to Reporting Services. The problem I have is that as soon as I run the CREATE PROCEDURE script, I get an error saying ;
Msg 216, Level 16, State 1, Procedure spWTRWeeklyTerrierData, Line 16
Parameters were not supplied for the function 'fnWTRTerrierData'.
How can I add parameters to the function sufficently so that I can run the Create procedure element of my code?
Regards
Parameters In Function In OLE DB Source
Jan 12, 2007Hi there!
I need to use some parameters in an OLE DB Source like that:
select * from mdm.mdm_pos_hierarchies
where dbo.fkt_get_guelt_von (posh_valid_fr) <= dbo.fkt_get_guelt_von (?)
and dbo.fkt_get_guelt_bis (posh_valid_to) >= dbo.fkt_get_guelt_bis (?)
The function returns a valid datetime. These parameters normaly works fine, but not with use as funtion-paramerters. I get feeble error messages (by trying to map the parameters) like that:
"Falsche Syntax in der Nähe von ')'. (Microsoft SQL Native Client)" - what means "Wrong syntax near ')'" and says nothing. If i replace the parameters with the mapped value (i.E. '200601') it works fine.
What is the reason for that? It there any solution or a workaround?
Thanks, Torsten
Unlimited Attributes On A Table
Nov 23, 2006Bit of a design question as I'm interested to know if anyone's done anythign like this...This is my main table (ish) Thing(ThingId, Ref)I then need to be able to give this "Thing" any number of attributes. Thing1 - Type:Red, Location:LondonThing2 - Type:Blue, Height:400, Width: 300Thing3 - Height:500, Location:Norwich But I have no idea how to model this in the database - it needs to be in such a way that I can add a Thing and all its attributes in one database hit basically (is there a stored procedure you could pass an array into?) My initial thoughts were to have Thing(ThingId, Ref) Attribute(AttributeId, ThingId*, AttributeTypeId*, Value) AttributeType(AttributeTypeId, Description) Is that completely mad? It seems like quite a lot of data accesses to enter a ThingIt could be Thing(ThingId, Ref, Type, Location, Height, Width) but then when "Thing - Color:White" comes along the model is stuffed Any ideas? (hope that makes sense)
View 3 Replies View RelatedUnlimited Characters In A String?
Jan 24, 2005Is there a way to make a string field that has an unlimited amount of characters?
View 1 Replies View RelatedTransact SQL :: Passing Parameters Through SP To A Function
Sep 23, 2015I have an SP that is working, it creates a Union between 3 tables then creates a single table - I am using Visual studio Grid Control to view this by a browser, its working. at the bottom of the SP is a line of code that calls a function, the function queries a View. When I run the SP, SQL returns the data from the Union plus the data from the select statement on the Function. This all works but I can't get the data returned by the function query onto a browser.
I am doing it this was as the parameters in my SP are also used when calling the function, works really well. Is GTotal a return value?
Here is my function:
USE [LOGONs]
GO
/****** Object: UserDefinedFunction [dbo].[FX_AnnaulBudget1] Script Date: 23/09/2015 12:27:50 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
[Code] ....
...and here is my SP:
USE [LOGONs]
GO
/****** Object: StoredProcedure [dbo].[USP_AnnualBudget] Script Date: 23/09/2015 12:57:46 ******/
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
ALTER PROCEDURE [dbo].[USP_AnnualBudget]
[Code] .....
Need An Unlimited Length Char Field
Dec 7, 1998Hi,
If I want to make a field of characters to be unlimited length(or maybe 2k for example), what datatype should I use?
Char, varchar and text have a max. limit of 255...
Will appreciate any suggestions.
Thanks,
Nishi
Unlimited Number Of Characters In A Field
Feb 4, 2005Hello,
I am developing a message board using ASP on IIS and SQL Server 2000, and I am running into a problem.
When a user enters their post, they enter their user name, subject, and of course all of their post content. Now the post content should be an unlimited number of characters since it could end up being multiple paragraphs.
I know I could just use an ASP file system object and write the text to a file, but I wanted to save all of these paragraphs as a field in a database table so I could pull it from the database so it could be edited by the user.
Is there a way to make a field be able to take in an unlimited amount of characters?
Or is this the wrong way to do things; is it bad to have an unlimited amount of characters in a table field? Should I stick to using the ASP System File Object?
Using SQL Trigger To Create Unlimited Unique Id's
Jan 26, 2007Introduction
This MS SQL Store Procedure solves a problem which is not common
except when you have a table in a database which each row needs
to be uniquely identified and their are more rows in the table
than you can identfy with a big int or Unique Identifier.
So for example,
if you used a "unique identifier" you would be limited to
8.6904152163272468261061026005374e+50 unique rows at best.
If you used a "Big Int" you would be limited to -2^63 (
-9223372036854775808) through 2^63-1 (9223372036854775807).
This method will allow you to have 2.2528399544939174411840147874773e+106. (With cluster indexing the
identity field.)
or, 4.722366482869645213696e+129 (Without indexing the identity field)
Why would you need that many unique values? Well, the reason for
this invention is due to the need to track every email that an
application sends for Sarbanes/Oxley Requirements. With this
technique, every email sent out will be uniquely identified for a
very very very long time.
The purpose of this is to show how to set up an identity column with
a larger range than a big int or unique id. Try transaction logs
where you need to track every change, or determining click paths
through a website, etc.
The point is, that this method pretty much does what the title
says, "Create unlimited Unique ID's". What table you apply this too
and for what reason is up the the programmer.
Background
This design uses basic counting methods and handles the limitations
of MS SQL TSQL. First, you can use a varchar(4000) as the unique id
column but the issue with this is that as of MSSQL 2000, the largest
indexable field is 900 character. So if you need to be able to
quickly search the table by key, or clustered keys, you need to limit
your key column with to 900 characters, otherwise if you use a varchar(4000) make sure when searching the table you create a
temporary table, select the subset into it and search that.
Using the code
First, copy and paste all the TSQL into a Query Window and
compile it in the database you wish to use it in.
[Code]
/**********************************************************************************
Program: ALTER Unlimited Unique ID's (Auto Increment)
Programmer: Vince Gee
Date: 9/28/2005
Parameters:
@TABLE_NAME - The name of the table to establish the auto incrementing field in
@COLUMN_NAME - The column name in the table to establish the auto incrementing field in
@DROP_EXISTING_TRIGGER - Whether or not on running to drop an existing trigger with
the same name.
Theory:
A varchar 900 field will be able to have 2.2528399544939174411840147874773e+106 unique identifiers in it.
A uniqueID only has 8.6904152163272468261061026005374e+50 unique identifiers in it.
Description:
The purpose of the sql procedure is to automate the creation of
auto updating identities on a sql table without the trouble of
writing the trigger each time.
So what does this do? Well for example lets say we have the following
table which you will have many many many rows in.
ALTER TABLE [Countertest]
(
[myKey] [varchar] (900) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[anyvalue1] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[anyvalue2] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[AA] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL
)
myKey is the unique identifier for each row. We can set it's size really
to anything, This proc will look for the column specified and determine it's
size. The column should be nvarchar of type
All the other columns don't matter, the only issue is if all the column names concated
together exceed the storage compacity w/ the trigger code of 4000 characters. If this
is the case your gonna have to write the trigger manually.
So to set the auto incrementing field up you would call this proc:
Execute SP_SET_UNIQUE_FIELD 'Countertest','myKey'
or
Execute SP_SET_UNIQUE_FIELD 'Countertest','myKey',1
Output:
When data is inserted into the table, the auto incrementing field will look like
0000000001
0000000002
0000000003
0000000004
0000000005
0000000006
0000000007
0000000008
0000000009
000000000A
000000000B
000000000C
000000000D
000000000E
000000000F
000000000G
000000000H
000000000I
000000000J
000000000K
000000000L
with how many 0's set up etc. It goes 0-9, then A-Z
***********************************************************************************/
ALTER PROC SP_SET_UNIQUE_FIELD
@TABLE_NAME VARCHAR(255),
@COLUMN_NAME VARCHAR(255),
@DROP_EXISTING_TRIGGER BIT =0
AS
DECLARE
@EXECSQLSTRING nvarchar (4000),
@counter int,
@COLUMN_NAMES varchar(4000),
@tCOLUMN_NAME varchar(4000),
@MAXORDINAL int,
@KEYLENGTH int
--If the trigger
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[' + 'IO_Trig_INS_' + @COLUMN_NAME + ']') and OBJECTPROPERTY(id, N'IsTrigger') = 1)
begin
IF @DROP_EXISTING_TRIGGER = 0
BEGIN
-- USER DOESN'T WANT US TO AUTODROP THE TRIGGER, BY DEFAULT AUTODROP TRIGGER IS OFF
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
PRINT 'STOP ERROR :: PLEASE DROP THE EXISTING TRIGGER BEFORE RUNNING THIS PROC'
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
RETURN
END
ELSE
BEGIN
--CREATE A SQL STRING TO DROP THE TRIGGER SO WE CAN RECREATE IT.
set @EXECSQLSTRING = 'drop trigger IO_Trig_INS_' + @COLUMN_NAME
--EXECUTE THE SQL
EXEC SP_EXECUTESQL @EXECSQLSTRING
END
end
--CREATE A TABLE TO HOLD THE RESULTS FOR THE SP_COLUMNS
create table #temp
(
TABLE_QUALIFIER varchar(255),
TABLE_OWNER varchar(255),
TABLE_NAME varchar(255),
COLUMN_NAME varchar(255),
DATA_TYPE int,
[TYPE_NAME] varchar(255),
[PRECISION] int,
LENGTH int,
SCALE int,
RADIX int,
NULLABLE int,
REMARKS varchar(255),
COLUMN_DEF varchar(255),
SQL_DATA_TYPE int,
SQL_DATETIME_SUB varchar(255),
CHAR_OCTET_LENGTH int,
ORDINAL_POSITION int,
IS_NULLABLE varchar(255),
SS_DATA_TYPE int
)
--POPULATE THE TEMP TABLE W/ A SP_COLUMNS ON THE TARGET TABLE
insert into #temp
exec sp_columns @TABLE_NAME
--CYCLE THROUGH ALL THE COLUMN NAMES AND BUILD OUR COLUMN NAME STRING
--FOR INSERTS. THE LAST COLUMN NAME IS ALWAYS THE IDENTITY FIELD.
SELECT @MAXORDINAL = MAX(ORDINAL_POSITION) FROM #TEMP
SET @COUNTER = 1
SET @COLUMN_NAMES = ''
WHILE @COUNTER <= @MAXORDINAL
BEGIN
select @tCOLUMN_NAME = COLUMN_NAME FROM #TEMP WHERE ORDINAL_POSITION = @COUNTER
if (@tCOLUMN_NAME <> @COLUMN_NAME)
begin
SET @COLUMN_NAMES = @COLUMN_NAMES + @tCOLUMN_NAME+ ','
end
else
begin
select @KEYLENGTH = LENGTH FROM #TEMP WHERE ORDINAL_POSITION = @COUNTER
end
SET @COUNTER = @COUNTER +1
END
--CLEAN UP
drop table #temp
IF @KEYLENGTH > 900
Begin
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!WARNING:: YOU WILL NOT BE ABLE TO INDEX THIS TABLE BY YOUR CHOSEN COLUMN,!!!!!!!!!!!!!!!!!!!!!'
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!BECAUSE THE COLUMN IS OVER 900 CHARACTERS. 900 CHARS ARE THE MAX THAT !!!!!!!!!!!!!!!!!!!!!'
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!THAT CAN BE INDEXED !!!!!!!!!!!!!!!!!!!!!'
PRINT '!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!'
END
SET @EXECSQLSTRING = '
CREATE TRIGGER IO_Trig_INS_' + @COLUMN_NAME + ' ON ' + @TABLE_NAME + '
INSTEAD OF INSERT
AS
BEGIN
DECLARE
@VALUE VARCHAR(' + CONVERT(VARCHAR(900),@KEYLENGTH) + '),
@REVERSED_VALUE VARCHAR(' + CONVERT(VARCHAR(900),@KEYLENGTH) + '),
@COUNTER INT,
@LEFT_SIDE VARCHAR(' + CONVERT(VARCHAR(900),@KEYLENGTH) + '),
@RIGHT_SIDE VARCHAR(' + CONVERT(VARCHAR(900),@KEYLENGTH) + '),
@CHAR_VALUE CHAR
select @VALUE = ISNULL(MAX(' + @COLUMN_NAME + '),REPLICATE (' + "'0'" + ',' + CONVERT(VARCHAR(900),@KEYLENGTH) + ') ) from ' + @TABLE_NAME + '
SET @REVERSED_VALUE = REVERSE(@VALUE)
SET @COUNTER = 1
WHILE @COUNTER <= LEN(@REVERSED_VALUE)
BEGIN
SET @CHAR_VALUE = SUBSTRING(@REVERSED_VALUE,@COUNTER,1)
IF ASCII(@CHAR_VALUE) <> 122
BEGIN
IF @COUNTER = 1
SET @LEFT_SIDE = ''''
ELSE
SET @LEFT_SIDE = LEFT (@REVERSED_VALUE,@COUNTER - 1)
IF @COUNTER = LEN(@VALUE)
SET @RIGHT_SIDE = ''''
ELSE
SET @RIGHT_SIDE = RIGHT (@REVERSED_VALUE,LEN(@REVERSED_VALUE)- @COUNTER)
IF ASCII(@CHAR_VALUE) + 1 = 58
SET @CHAR_VALUE = CHAR(97)
ELSE
SET @CHAR_VALUE = CHAR(ASCII(@CHAR_VALUE) + 1)
SET @REVERSED_VALUE = ISNULL(@LEFT_SIDE,"") + ISNULL(@CHAR_VALUE,"") + ISNULL(@RIGHT_SIDE,"")
BREAK
END
ELSE
BEGIN
IF @COUNTER = 1
SET @LEFT_SIDE = ''''
ELSE
SET @LEFT_SIDE = LEFT (@REVERSED_VALUE,@COUNTER - 1)
IF @COUNTER = LEN(@VALUE)
SET @RIGHT_SIDE = ''''
ELSE
SET @RIGHT_SIDE = RIGHT (@REVERSED_VALUE,LEN(@REVERSED_VALUE)- @COUNTER)
SET @CHAR_VALUE = CHAR(48) --SET THE CURRENT POSITION TO ZERO AND WE INCREMENT THE NEXT DIGIT.
SET @REVERSED_VALUE = ISNULL(@LEFT_SIDE,"") + ISNULL(@CHAR_VALUE,"") + ISNULL(@RIGHT_SIDE,"")
END
SET @COUNTER = @COUNTER +1
END
SET @VALUE = REVERSE (@REVERSED_VALUE)
INSERT INTO ' + @TABLE_NAME + ' (' + @COLUMN_NAMES + @COLUMN_NAME + ')
SELECT
' + @COLUMN_NAMES + '@VALUE
FROM
inserted
END'
if len(@EXECSQLSTRING) <4000
begin
EXEC SP_EXECUTESQL @EXECSQLSTRING
end
else
begin
print 'STOP ERROR:: BUFFER OVERFLOW. THE GENERATED TRIGGER TEXT > 4000, Trigger must be hand written.'
end
GO
SET QUOTED_IDENTIFIER OFF
GO
SET ANSI_NULLS ON
GO
First, to test the functionality create a temp table.
First, to test the functionality create a temp table.
Create TABLE [Countertest]
(
[myKey] [varchar] (900) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[anyvalue1] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[anyvalue2] [varchar] (10) COLLATE SQL_Latin1_General_CP1_CI_AS NULL ,
[AA] [text] COLLATE SQL_Latin1_General_CP1_CI_AS NULL
)
Second, call the proc on the table. Parameters are:
Table Name - Name of the table to put the trigger on.
Column Name - Name of the column to use as the key.
Drop Existing Trigger - If this is set to 1 and a trigger with the name generated by this stored procedure exists it will drop it. (OPTIONAL)
Execute SP_SET_UNIQUE_FIELD 'Countertest','myKey'
or
Execute SP_SET_UNIQUE_FIELD 'Countertest','myKey',1
Now, we are going to test how this works. Copy and paste the following code into a query analyzer.
declare @t int
set @t = 0
while @t <= 40000
begin
insert into countertest
select '','s','s','s'
set @t = @t + 1
end
GO
Once this completes, you can inspect the unique id by selecting it from the table
SELECT RIGHT (MYKEY,10) FROM countertest
The table will keep incrementing the key column first 0-9 then a-z. When it reaches all 'z' it will roll over, but if your key column is wide enough this shouldn't happen while your still employeed.
Also, the stored procedure figures out how wide the key column is automatically and adjusts the script accordingly. So if you widen or shrink the key column, just rerun the proc to update the trigger script.
Problem With Getdate Function In Optional Parameters
Mar 29, 2007Hi, I want to write a StoredProcedure with one optional input parameter of Date and when it is missing I want current date to be used.
I have written the following StoredProcedure, but getdate function doesn`t work. If I replace it with a constant date, it works.
ALTER PROCEDURE [dbo].[LinksFees_Record]
@Date datetime = getdate
AS
INSERT INTO LinkSearchFees
(LinkID, Price, [Date])
SELECT ID AS LinkID, SearchDayFee AS Price, @Date
FROM Links
WHERE (SearchDayFee > 0)
RETURN
When I call the StoredProcedure the following exception occur: Conversion failed when converting datetime from character string.
How can I fix it?
SqlDecimal Function Parameters With NULL Values
Oct 4, 2007Hi,
I have a CLR function that throws an error if one of the parameters is NULL. Am I using the IsNullable tag correctly or am I supposed to do this another way? The function simply formats decimal values using .NET culture information and returns a string. Thanks very much for any help. -- Erik
[Microsoft.SqlServer.Server.SqlFunction(IsDeterministic=true, DataAccess=DataAccessKind.None)]
[return: SqlFacet(MaxSize = 30, IsNullable=true)]
public static string FormatGeneralDecimal([SqlFacet(Precision = 28, Scale = 8, IsNullable = true)] SqlDecimal sqlDc,
[SqlFacet(MaxSize = 10)] string cultureName)
{
string result = null;
if (!sqlDc.IsNull)
{
CultureInfo ci = CultureInfo.CreateSpecificCulture(cultureName);
result = sqlDc.Value.ToString("G", ci);
}
return result;
}
It works great unless I call it with a NULL value for sqlDc, in which case I get this:
select [dbo].[FormatGeneralDecimal](NULL, 'de-DE')
Msg 6522, Level 16, State 2, Line 1
A .NET Framework error occurred during execution of user-defined routine or aggregate "FormatGeneralDecimal":
System.Data.SqlTypes.SqlNullValueException: Data is Null. This method or property cannot be called on Null values.
System.Data.SqlTypes.SqlNullValueException:
at System.Data.SqlTypes.SqlDecimal.ToDecimal()
at System.Data.SqlTypes.SqlDecimal.get_Value()
at MyFunctions.FormatGeneralDecimal(SqlDecimal sqlDc, String cultureName)
Which Datatype Supports Unlimited Characters In Sqlserver2000
May 3, 2008hi
am using vs2005 with sqlserver2000 .
i want to store word file/rtf/txt content in a table.which datatype i have to select.
which datatype supports unlimited characters?it has to support all type of characters(including html tags).
Thanks
shobha
Server Tables Getting Locked For Unlimited Time
Oct 20, 2014We have a project developed on asp.net 3.5 with SQL Server 2008 R2 as back end database. One of our client is facing issue of system performance in the afternoon time only. Mostly the tables are getting locked for unlimited time and system gets very slow. Need a professional SQL Server DBA to identify the root cause.
View 1 Replies View RelatedDatabase Size Not Growing Despite Unlimited Growth
Mar 11, 2004Hi All,
Database size is not increasing automatically ,however I have set it as unlimited growth. Any idea about this ?
thanks for in advance,
Sedat Duztas
Probil
HOw Can I Alter Databases To Change Log Size To Unlimited?
Feb 17, 2008 We have 300+ databases on one sinlge server. If I need to change log size to "unlimited" for all of them, is there any way to do so? Please advice.
-Julie
SQL Server 2012 :: Passing Parameters To Table Valued Function?
Mar 13, 2014I am creating a function where I want to pass it parameters and then use those parameters in a select statement. When I do that it selects the variable name as a literal not a column. How do I switch that context.
Query:
ALTER FUNCTION [dbo].[ufn_Banner_Orion_Employee_Comparison_parser_v2]
(
@BANNER_COLUMN AS VARCHAR(MAX),
@ORION_COLUMN AS VARCHAR(MAX)
)
RETURNS @Banner_Orion_Employee_Comparison TABLE
[code]....
Returns:
I execute this:
select * from ufn_Banner_Orion_Employee_Comparison_parser_v2 ('a.BANNER_RANK' , 'b.[rank]')
and get:
CerecerezNULLNULLa.BANNER_RANKb.[rank]
Programatically Control Show/hide Parameters (chevron Symbol Function)
Jan 4, 2008I'd like the state of the function bars to stay at whatever it was as the user moves from one report to the next rather than opening to full each time a new report is opened. Can this be done through a setting or programatically at teh report level? Is there a <default_toolbars_OpenState> tag or something?
Thanks in advance.
SQL Server 2012 :: Optimize PIVOT Table To Include Unlimited Column And QTY Of SKU
Jan 24, 2014Reformatting data in a PIVOT Table or find a better way to display.
--ORDERDETAIL TABLE
SKUO QTYO ORDERIDO
KUM 1 12345
KUS 2 12345
SUK 1 12345
KHN 4 12345
DRE 1 12345
[Code] ....
Number of SKU's in order could be over 1000.
Looking to change my current pivot table to allow an unlimited number of SKU's and add QTY.
Data I am looking to get. MAX of 15 SKUS Per line.
ORDERID SKU1 QTY1 SKU2 QTY2 SKU3 QTY3 SKU4 QTY4 SKU5 QTY5 SKU6 QTY6 SKU7 QTY7 SKU8
QTY8 SKU9 QTY9 SKU10 QTY10 SKU11 QTY11 SKU12 QTY12 SKU13 QTY13 SKU14 QTY14 SKU15 QTY15
12345 KUM 1 KUS 2 SUK 1 KHN 4 DRE 1 HGF 2 FDE 1 CDS 1 GYT 1 POI 3 LKH 2 TTT 4 JHG 8 YUI 2 WQE 1
12345 PMN 1 BVC 1 ABD 1
[Code] ....
CURRENT PIVOT ONLY GOES TO 150 - BELOW
SELECT PKGCUSTOM4, [1] AS [SKU1], [2] AS [SKU2], [3] AS [SKU3], [4] AS [SKU4], [5] AS [SKU5], [6] AS [SKU6], [7] AS [SKU7], [8] AS [SKU8], [9] AS [SKU9], [10] AS [SKU10],
[11] AS [SKU11], [12] AS [SKU12], [13] AS [SKU13], [14] AS [SKU14], [15] AS [SKU15], [16] AS [SKU16], [17] AS [SKU17], [18] AS [SKU18], [19] AS [SKU19],
[Code] ....
The 'Unlimited Data Mining Attributes.' Feature Is Not Included In The 'Standard Edition' SKU
Feb 21, 2008When trying to process my minding model (using Association Rules) i receive the following errors
Errors and Warnings from Response
Error (Data mining): The 'Items Recommendations' mining model has 64675 attributes. This number of attributes exceeds the attribute limit of 5000 allowed by the current version of the algorithm associated with the mining model.
Errors related to feature availability and configuration: The 'Unlimited data mining attributes.' feature is not included in the 'Standard Edition' SKU.
I searched through the internet and found that a hotfix can be installed to make it work (http://support.microsoft.com/kb/932609). I emailed microsoft and they provided me back with the hotfix and a password.
I tried to install the fix but i couldnt. It needed a prerequisit fix. So i installed SQL Server 2005 Service Pack 2 from (http://support.microsoft.com/?kbid=921896)
Then tried to install the fix for my unlimited attributes problem.
I tried to process my module after installing the fix and restarting my computer, but am still gettin the same error.I created another new model but the problem still exists.
Am i missing something here? Any idea to make it work?
Is there any alternative? I need to use all the elements in my datasource view.
ADO.NET 2-VB 2005 Express Form1:Printing Output Of Returned Data/Parameters From The Parameters Collection Of A Stored Procedure
Mar 12, 2008Hi all,
From the "How to Call a Parameterized Stored Procedure by Using ADO.NET and Visual Basic.NET" in http://support.microsft.com/kb/308049, I copied the following code to a project "pubsTestProc1.vb" of my VB 2005 Express Windows Application:
Imports System.Data
Imports System.Data.SqlClient
Imports System.Data.SqlDbType
Public Class Form1
Private Sub Form1_Load(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles MyBase.Load
Dim PubsConn As SqlConnection = New SqlConnection("Data Source=.SQLEXPRESS;integrated security=sspi;" & "initial Catalog=pubs;")
Dim testCMD As SqlCommand = New SqlCommand("TestProcedure", PubsConn)
testCMD.CommandType = CommandType.StoredProcedure
Dim RetValue As SqlParameter = testCMD.Parameters.Add("RetValue", SqlDbType.Int)
RetValue.Direction = ParameterDirection.ReturnValue
Dim auIDIN As SqlParameter = testCMD.Parameters.Add("@au_idIN", SqlDbType.VarChar, 11)
auIDIN.Direction = ParameterDirection.Input
Dim NumTitles As SqlParameter = testCMD.Parameters.Add("@numtitlesout", SqlDbType.Int)
NumTitles.Direction = ParameterDirection.Output
auIDIN.Value = "213-46-8915"
PubsConn.Open()
Dim myReader As SqlDataReader = testCMD.ExecuteReader()
Console.WriteLine("Book Titles for this Author:")
Do While myReader.Read
Console.WriteLine("{0}", myReader.GetString(2))
Loop
myReader.Close()
Console.WriteLine("Return Value: " & (RetValue.Value))
Console.WriteLine("Number of Records: " & (NumTitles.Value))
End Sub
End Class
//////////////////////////////////////////////////////////////////////////////////////////////////////////////////////
The original article uses the code statements in pink for the Console Applcation of VB.NET. I do not know how to print out the output of ("Book Titles for this Author:"), ("{0}", myReader.GetString(2)), ("Return Value: " & (RetValue.Value)) and ("Number of Records: " & (NumTitles.Value)) in the Windows Application Form1 of my VB 2005 Express. Please help and advise.
Thanks in advance,
Scott Chang
Run Report By Different Parameters Without Having To Enter Information For All Parameters At Same Time
Oct 29, 2013I have a SSRS report with four parameters,and I want to be able to enter information for two of the parameters and run the report opposed to all four of them. However, when I select allow blanks and only select the parameters that I want to run the report by, the report come back blank..Essentially, I want to be able to the run report by different parameters without having to enter information for all parameters at the same time.
View 2 Replies View RelatedQuery Duration Using Parameters Vrs No Parameters
Apr 27, 2006Hi,
I have an app in C# that executes a query using SQLCommand and parameters and is taking too much time to execute.
I open a SQLProfiler and this is what I have :
exec sp_executesql N' SELECT TranDateTime ... WHERE CustomerId = @CustomerId',
N'@CustomerId nvarchar(4000)', @CustomerId = N'11111
I ran the same query directly from Query Analyzer and take the same amount of time to execute (about 8 seconds)
I decided to take the parameters out and concatenate the value and it takes less than 2 second to execute.
Here it comes the first question...
Why does using parameters takes way too much time more than not using parameters?
Then, I decided to move the query to a Stored Procedure and it executes in a snap too.
The only problem I have using a SP is that the query can receive more than 1 parameter and up to 5 parameters, which is easy to build in the application but not in the SP
I usually do it something like
(@CustomerId is null or CustomerId = @CustomerId) but it generate a table scan and with a table with a few mills of records is not a good idea to have such scan.
Is there a way to handle "dynamic parameters" in a efficient way???
Parameters Dependencies When Using Parameters!Name.Label
Mar 7, 2007Hello:
I just recently bumped into this problem and I think I know what's causing it. This is the setup:
Report Parameters: FromDate, ToDate, DivisionalOffice, Manager, SalesRep
dsCalendarEvents Parameters: FromDate.Value, ToDate.Value, DivisionalOffice.Value,
dsDivisions Parameters: N/A
dsManager Parameters: DivisionalOffice.Value
dsSalesRep: DivisionalOffice.Label
When I query the ReportServices WS and scan the parameter dependencies for SalesRep it says there are four dependencies: FromDate, ToDate, DivisionalOffice and Manager!!!
If I change "dsSalesRep" to use "DivisionalOffice.Value" the ReportingServices WS parameter dependency scan returns only one dependency for "SalesRep" parameter!!!( This is the correct behavior )
Has anybody seen this behavior and more importantly, is there a work around?
Regards,
Help Convert MS Access Function To MS SQL User Defined Function
Aug 1, 2005I have this function in access I need to be able to use in ms sql. Having problems trying to get it to work. The function gets rid of the leading zeros if the field being past dosn't have any non number characters.For example:TrimZero("000000001023") > "1023"TrimZero("E1025") > "E1025"TrimZero("000000021021") > "21021"TrimZero("R5545") > "R5545"Here is the function that works in access:Public Function TrimZero(strField As Variant) As String Dim strReturn As String If IsNull(strField) = True Then strReturn = "" Else strReturn = strField Do While Left(strReturn, 1) = "0" strReturn = Mid(strReturn, 2) Loop End If TrimZero = strReturnEnd Function
View 3 Replies View RelatedIn-Line Table-Valued Function: How To Get The Result Out From The Function?
Dec 9, 2007Hi all,
I executed the following sql script successfuuly:
shcInLineTableFN.sql:
USE pubs
GO
CREATE FUNCTION dbo.AuthorsForState(@cState char(2))
RETURNS TABLE
AS
RETURN (SELECT * FROM Authors WHERE state = @cState)
GO
And the "dbo.AuthorsForState" is in the Table-valued Functions, Programmabilty, pubs Database.
I tried to get the result out of the "dbo.AuthorsForState" by executing the following sql script:
shcInlineTableFNresult.sql:
USE pubs
GO
SELECT * FROM shcInLineTableFN
GO
I got the following error message:
Msg 208, Level 16, State 1, Line 1
Invalid object name 'shcInLineTableFN'.
Please help and advise me how to fix the syntax
"SELECT * FROM shcInLineTableFN"
and get the right table shown in the output.
Thanks in advance,
Scott Chang
A Function Smilar To DECODE Function In Oracle
Oct 19, 2004I need to know how can i incoporate the functionality of DECODE function like the one in ORACLE in mSSQL..
please if anyone can help me out...
ali
Using RAND Function In User Defined Function?
Mar 22, 2006Got some errors on this one...
Is Rand function cannot be used in the User Defined function?
Thanks.
Pass Output Of A Function To Another Function As Input
Jan 7, 2014I need to be able to pass the output of a function to another function as input, where all functions involved are user-defined in-line table-valued functions. I already posted this on Stack Exchange, so here is a link to the relevant code: [URL] ...
I am fairly certain OUTER APPLY is the core answer here; there's *clearly* some way in which does *not* do what I need, or I would not get the null output you see in the link, but it seems clear that there should be a way to fool it into working.
I Want A Function Like IfNull Function To Use In Expression Builder
Jul 24, 2007Hi,
I wonder if there a function that i can use in the expression builder that return a value (e.g o) if the input value is null ( Like ifnull(colum1,0) )
i hope to have the answer because i need it so much.
Maylo
ROW_NUMBER() Function Is Not Recognized In Store Procedure.(how To Add ROW_NUMBER() Function Into SQL SERVER 2005 DataBase Library )
Feb 4, 2008Can anybody know ,how can we add builtin functions(ROW_NUMBER()) of Sql Server 2005 into database library.
I get this error when i used into storeprocedure :
ROW_NUMBER() function is not recognized in store procedure.
i used MS SQL SERVER 2005 , so i think "ROW_FUNCTION()" is not in MS SQL SERVER 2005 database library.
I need to add that function into MS SQL SERVER 2005 database library.
Can anbody know how we can add that function into MS SQL SERVER 2005 database library?
Function To Call Function By Name Given As Parameter
Jul 20, 2005I want to write function to call another function which name isparameter to first function. Other parameters should be passed tocalled function.If I call it function('f1',10) it should call f1(10). If I call itfunction('f2',5) it should call f2(5).So far i tried something likeCREATE FUNCTION [dbo].[func] (@f varchar(50),@m money)RETURNS varchar(50) ASBEGINreturn(select 'dbo.'+@f+'('+convert(varchar(50),@m)+')')ENDWhen I call it select dbo.formuła('f_test',1000) it returns'select f_test(1000)', but not value of f_test(1000).What's wrong?Mariusz
View 3 Replies View Related