GENERATING A LIST OF DATES
Jan 25, 2002Can someone show me how to load a list of dates into a table.
(i.e. from Jan. 1, 1995 to Jan, 1, 2005)
Thanks in advance!
BV
ADVERTISEMENT
Generating A Series Of Numbers Or Dates?
Jul 20, 2005I want to generate a resultset that is just a series of numbers inascending order or perhaps a series of dates.. What I mean is, isthere a way to generate a temporary table of dates given an input of astart date and an end date.. This table would then contain an entryfor each date in ascending order from the start date to and includingthe end date..Or perhaps with numbers, given a start of 5 and and end of 7the resulting table would be567Would appreciate any help with this one.. ThanksChris
View 2 Replies View RelatedSQL Server 2008 :: Generating Dates At Runtime
May 29, 2015I am trying to generate dates for a roster dynamically in a stored procedure. If my start date is '01/01/2015', end date is '12/31/2015', I should generate dates from '01/01/2015' adding 7 days.
The output comes like this:
01/01/2015
01/08/2015
01/15/2015
.
.
.
until end date
I do it through loop but just posting it here to know, if there is any other efficient way using CTEs or some sort of queries which can avoid loop in SP.
Generating Drop-Down List At Server
Nov 1, 2013we can generate drop-down list on the tables by writing sql query at "Access". I was wondering whether or not the same thing can be done for SQL Server?
View 4 Replies View RelatedGenerating Reports From SharePoint List Using Reporting Service
Feb 29, 2008Hello Everybody,
I am presently working on a project which handles much larger amount of data. The application demands extensive reporting from the SharePoint data. I'd like to know how I can generate reports from the SharePoint lists using Reporting Services.
Planning to install in SQL Server Integrated mode
Thank you,
Arun
RS Pick List Not Generating From Data Set With Stored Procedure
Apr 1, 2008I have a stored procedure that is pulling 3 parameters: @user_id, @, begin_date and @end_date. The parameters are setup in the 'parameters' tab of the data set, and also the 'report parameters', however, when I go to run report, I get textbox for user_id, instead of a drop down with pick list.
I tried creating a separate dataset to bring in user_id's only and manually create a parameter for it in 'report parameters'. I then get a drop down box with repeating data, and when I run the report, I get back all user_id's instead of the one I chose.
I'm finding the parameters are the most difficult concept within RS. Does anyone know I can make this work?
Thanks!
Get List Of Dates Between A Given Range.
Oct 12, 2006I'm trying to get a list of dates (actually, only the mondays) between a given range of two dates.Any help on the SQL statements I need to use, I'm having no luck.Thanks in advance.
View 3 Replies View RelatedList Parameterized Dates
Apr 4, 2007Hello,
For my report I want to have the days listed as a dropdown with simple dates during the month (3/27/2007), but there may be many records for that date as it is using the time as well. Unfortunately I don't even know where to begin
Ultimately the user will be given a dropdown listbox showing the simple dates only for the current month and on selection user will view only that days report. How do I basically treat each day as a group in the parameter?
Thanks!
SQL 2012 :: Generating Date Range Values (start / End Dates) From Month Columns With Boolean Values
Jan 13, 2015I've got some records like this:
ID_________Jan Feb...........................Dec
0000030257 0 0 0 0 0 0 1 1 1 1 1 0
where each month field has a 0 or 1, depending on if the person was enrolled that month.
I'm being asked to generate a table like this:
ID_________ Start_Date End_Date
0000030257 July 1, 2014 Nov 30, 2014
Is there some slam dunk way to do this without a bunch of If/Then statements?
The editor compressed all my space fields, so the column headers are off in some places.
Transact SQL :: List Date Between Dates
Aug 22, 2015i have a table like below
CREATE TABLE #Test (FromDate DATE,ToDate DATE)
insert into #Test VALUES ('2015-08-08','2015-08-11')
insert into #Test VALUES ('2015-08-13','2015-08-16')
insert into #Test VALUES ('2015-08-19','2015-08-21')
SELECT * from #Test
drop TABLE #Test
i need to display the dates as single column between from and todate.my expected result is like below
CREATE TABLE #Result (ResDate DATE)
insert into #Result VALUES ('2015-08-08')
insert into #Result VALUES ('2015-08-09')
insert into #Result VALUES ('2015-08-10')
insert into #Result VALUES ('2015-08-11')
[code]....
How Do Order The List By Date To Show For New Dates.
Aug 2, 2007 <asp:SqlDataSource ID="SqlDataSource1" runat="server" ConnectionString="<%$ ConnectionStrings:NWHCConnectionString %>"
SelectCommand="SELECT [Title], [URL], [Date] FROM [Article] ORDER BY [Date] DESC"></asp:SqlDataSource>
<asp:Repeater id="myRepeaterUL" runat="server" DataSourceID="SqlDataSource1">
<HeaderTemplate>
<ul>
</HeaderTemplate>
<ItemTemplate>
<li><a href="<%# DataBinder.Eval(Container.DataItem, "URL") %>"><%#DataBinder.Eval(Container.DataItem, "Title")%></a><br /><%# Eval("Date") %></li>
</ItemTemplate>
<FooterTemplate>
</ul>
</FooterTemplate>
</asp:Repeater>
This is my code above, I am trying to order them to show the four new list of news. Here is a picture, yeah its old and everybody loves pictures. see the box on the right, i want to show only four, not all of it.
SQL Server 2012 :: List Dates In Columns
Nov 11, 2014I have a table (Event_Table) like:
EmployeeID, CustomerID, Date
1, 11, 2014-11-11
2, 13, 2014-12-10
1, 11, 2014-12-21
2, 13, 2015-01-11
1, 11, 2015-03-02
And now I would like to have a summary with a unique Employee/Customer combination and 3 Date columns like:
EmployeeID, CustomerID, Date1, Date2, Date3
1, 11, 2014-11-11, 2014-12-21, 2015-03-02
2, 13, 2014-12-10, 2015-01-11
Dates should be arranged with the first date in Date1, the next in Date2 and the third in Date3 (if there are forth and more dates I don´t care)
Dynamic CASE Statement Based On List Of Dates
Oct 5, 2007I have the following table of data. I need to take a date from a large table and do the following case:CASEWhen date < date(0) Then '0'When date between date(0) and date(1) Then '1'When date between date(1) and date(2) Then '2'When date >= date(3) Then '3'What I need is to be able to read all the dates the the Date table, sort then chronologically, and build the dynamic CASE statement so that the first When statement is < Date(0) and the last When statement is >= Date(Last)I hope I am making sense. Dates will be added to the table about once a year or so and I don't want to keep going back into the sql function and rewrite it with the latest date. Any ideas how to manipulate these dates into a case statement? Don't worry about the second table below. I just wanted you to see why I need to return an int from the Case function.thanksMilton
Dates Table
Date
4/1/2003
1/1/2006
4/2/2007
Fee Table
Date
Period
Class
Fee
1
Daily
True
329
1
Half Day
True
178
1
OT
True
49
1
Hourly
True
41
1
Daily
False
156
1
Half Day
False
86
1
OT
False
27
1
Hourly
False
19
2
Daily
True
355
2
Half Day
True
192
2
OT
True
50
2
Hourly
True
44
2
Daily
False
171
2
Half Day
False
92
2
OT
False
28
2
Hourly
False
21
3
Daily
True
364
3
Half Day
True
197
3
OT
True
51
3
Hourly
True
45
3
Daily
False
175
3
Half Day
False
94
3
OT
False
29
3
Hourly
False
21
Transact SQL :: How To Generate Date Ranges From Given List Of Dates
Sep 10, 2015I want generating Valid date ranges from any list of dates.
The List of Dates could be generated from the below TSQL -
SELECT '2015-06-02' [Date] UNION ALL
SELECT '2015-06-13' UNION ALL
SELECT '2015-06-14' UNION ALL
SELECT '2015-06-15' UNION ALL
SELECT '2015-06-16' UNION ALL
SELECT '2015-06-22' UNION ALL
SELECT '2015-06-23' UNION ALL
SELECT '2015-06-24'
And the expected output should look like -
SELECT '2015-06-02' FromDate, '2015-06-02' ToDate UNION ALL
SELECT '2015-06-13' FromDate, '2015-06-16' ToDate UNION ALL
SELECT '2015-06-22' FromDate, '2015-06-24' ToDate
Want To Use Parameters To Filter For Dates Between Two (parameter, User-input) Dates
Mar 2, 2006SQL 2005 Dev
How can I do this with Parameters? I can get a single parameter to filter for a single date (or even a combo list of the dates in DB). But I want my parameters to interact so that they specify a range. Is this possible?
T-SQL (SS2K8) :: Calculate Sum Of Dates Minus Repetitive Dates
Jul 18, 2014Today I have got one scenario to calculate the (sum of days difference minus(-) the dates if the same date is appearing both in assgn_dtm and complet_dtm)/* Here goes the table schema and sample data */
IF EXISTS (SELECT * FROM sys.objects WHERE object_id = OBJECT_ID(N'[dbo].[temp_tbl]') AND type in (N'U'))
DROP TABLE [dbo].[temp_tbl]
GO
CREATE TABLE [dbo].[temp_tbl](
[tbl_id] [bigint] NULL,
[cs_id] [int] NOT NULL,
[USERID] [int] NOT NULL,
[code]....
T-SQL (SS2K8) :: Insert Into Table Dates In Between Two Dates
Feb 28, 2015I have a table that has hotel guests and their start stay date and end stay date, i would like to insert into a new table the original information + add all days in between.
CREATE TABLE hotel_guests
(
[guest_name] [varchar](25) NULL,
[start_date] [date] NULL,
[end_date] [date] NULL,
[comment] [varchar](255) NULL
[code]...
Comparing Dates With Today Dates
Jun 21, 2005I want to know if there is a way to compare dates in the sql statement with dates that I input into a database and todays date. the datatype that I'm using is smalldatetime.The statement I used is:Select Date from Table where Date > 'Today.now'I get an errorCould this be done or is there another approach?
View 1 Replies View RelatedSQL 2012 :: List All Different Values That Go With Single CAS ID To Appear As Comma Separate List
Jun 15, 2015So at the moment, I don't have a function by the name CONCATENATE. What I like to do is to list all those different values that go with a single CASE_ID to appear as a a comma separate list. You might have a better way of doing without even writing a function
So the output would look like :
CASE_ID VARIABLE
=====================
1 [ABC],[HDR],[GHHHHH]
2 [ABCSS],[CCHDR],[XXGHHVVVHHH],[KKKJU],[KLK]
SELECT
preop.Case_ID,
dbo.Concatenate( '[' + CAST(preop.value_text AS VARCHAR) + ']' ) as variable
FROM
dbo.TBL_Preop preop
WHERE
preop.Deleted_CD = 0
GROUP BY
preop.Case_ID
Report Designer: Need To List Fields From Multiple Result Rows As Comma Seperated List (like A JOIN On Parameters)
Apr 9, 2008
I know I can do a JOIN(parameter, "some seperator") and it will build me a list/string of all the values in the multiselect parameter.
However, I want to do the same thing with all the occurances of a field in my result set (each row being an occurance).
For example say I have a form that is being printed which will pull in all the medications a patient is currently listed as having perscriptions for. I want to return all those values (say 8) and display them on a single line (or wrap onto additional lines as needed).
Something like:
List of current perscriptions: Allegra, Allegra-D, Clariton, Nasalcort, Sudafed, Zantac
How can I accomplish this?
I was playing with the list box, but that only lets me repeat on a new line, I couldn't find any way to get it to repeate side by side (repeat left to right instead of top to bottom). I played with the orientation options, but that really just lets me adjust how multiple columns are displayed as best I can tell.
Could a custom function of some sort be written to take all the values and spit them out one by one into a comma seperated string?
Insert Value List Doest Not Match Column List
Apr 18, 2007HI...
I need to do a simple task but it's difficult to a newbie on ssis..
i have two tables...
first one has an identity column and the second has fk to the first...
to each dataset row i need to do an insert on the first table, get the @@Identity and insert it on the second table !!
i'm trying to use ole db command but it's not working...it's showing the error "Insert Value list doest not match column list"
here is the script
INSERT INTO Address(
CepID,
Street,
Number,
Location,
Complement,
Reference)Values
(
?,
?,
?,
?,
?,
?
)
INSERT INTO CustomerAddress(
AddressID,
CustomerID,
AddressTypeID,
TypeDescription) VALUES(
@@Identity,
?,
?,
?
)
what's the problem ??
Items In List A That Don't Appear In List B (was Simple Query...I Think)
Jan 20, 2005Ok, I want to write a stored procedure / query that says the following:
Code:
If any of the items in list 'A' also appear in list 'B' --return false
If none of the items in list 'A' appear in list 'B' --return true
In pseudo-SQL, I want to write a clause like this
Code:
IF
(SELECT values FROM tableA) IN(SELECT values FROM tableB)
Return False
ELSE
Return True
Unfortunately, it seems I can't do that unless my subquery before the 'IN' statement returns only one value. Needless to say, it returns a number of values.
I may have to achieve this with some kind of logical loop but I don't know how to do that.
Can anyone help?
Select List Contains More Items Than Insert List
Mar 21, 2008I have a select list of fields that I need to select to get the results I need, however, I would like to insert only a chosen few of these fields into a table. I am getting the error, "The select list for the INSERT statement contains more items than the insert list. The number of SELECT values must match the number of INSERT columns."
How can I do this?
Insert Query:
insert into tsi_payments (PPID, PTICKETNUM, PLINENUM, PAMOUNT, PPATPAY, PDEPOSITDATE, PENTRYDATE, PHCPCCODE)
SELECT DISTINCT
tri_IDENT.IDA AS PPID,
tri_Ldg_Tran.CLM_ID AS PTicketNum,
tri_ClaimChg.Line_No AS PLineNum,
tri_Ldg_Tran.Tran_Amount AS PAmount,
CASE WHEN tln_PaymentTypeMappings.PTMMarsPaymentTypeCode = 'PATPMT'
THEN tri_ldg_tran.tran_amount * tln_PaymentTypeMappings.PTMMultiplier
ELSE 0 END AS PPatPay,
tri_Ldg_Tran.Create_Date AS PDepositDate,
tri_Ldg_Tran.Tran_Date AS PEntryDate,
tri_ClaimChg.Hsp_Code AS PHCPCCode,
tri_Ldg_Tran.Adj_Type,
tri_Ldg_Tran.PRS_ID,
tri_Ldg_Tran.Create_Time,
tri_Ldg_Tran.Adj_Group,
tri_Ldg_Tran.Payer_ID,
tri_Ldg_Tran.TRN_ID,
tri_ClaimChg.Primary_Claim,
tri_IDENT.Version
FROM [AO2AO2].MARS_SYS.DBO.tln_PaymentTypeMappings tln_PaymentTypeMappings RIGHT OUTER JOIN
qs_new_pmt_type ON tln_PaymentTypeMappings.PTMClientPaymentDesc =
qs_new_pmt_type.New_Pmt_Type RIGHT OUTER JOIN
tri_Ldg_Tran RIGHT OUTER JOIN
tri_IDENT LEFT OUTER JOIN
tri_ClaimChg ON tri_IDENT.Pat_Id1 =
tri_ClaimChg.Pat_ID1 ON tri_Ldg_Tran.PRS_ID =
tri_ClaimChg.PRS_ID AND
tri_Ldg_Tran.Chg_TRN_ID =
tri_ClaimChg.Chg_TRN_ID
AND tri_Ldg_Tran.Pat_ID1 = tri_IDENT.Pat_Id1 LEFT OUTER JOIN
tri_Payer ON tri_Ldg_Tran.Payer_ID
= tri_Payer.Payer_ID ON qs_new_pmt_type.Pay_Type
= tri_Ldg_Tran.Pay_Type AND
qs_new_pmt_type.Tran_Type = tri_Ldg_Tran.Tran_Type
WHERE (tln_PaymentTypeMappings.PTMMarsPaymentTypeCode <> N'Chg')
AND (tln_PaymentTypeMappings.PTMClientCode = 'SR')
AND (tri_ClaimChg.Primary_Claim = 1)
AND (tri_IDENT.Version = 0)
Insert Only New Items From A List But Get ID's For New And Existing In The List.
Feb 12, 2008Hi,
I have a a table that holds a list of words, I am trying to add to the list, however I only want to add new words. But I wish to return from my proc the list of words with ID, whether it is new or old.
Here's a script. the creates the table,indexes, function and the storeproc. call the proc like procStoreAndUpdateTokenList 'word1,word2,word3'
My table is now 500000 rows and growing and I am inserting on average 300 words, some new some old.
performance is a not that great so I'm thinking that my code can be improved.
SQL Express 2005 SP2
Windows Server 2003
1GB Ram....(I know, I know)
TIA
Code Snippet
GO
CREATE TABLE [dbo].[Tokens](
[TokenID] [int] IDENTITY(1,1) NOT NULL,
[Token] [varchar](255) COLLATE SQL_Latin1_General_CP1_CI_AS NOT NULL,
CONSTRAINT [PK_Tokens] PRIMARY KEY CLUSTERED
(
[TokenID] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, IGNORE_DUP_KEY = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
) ON [PRIMARY]
GO
CREATE UNIQUE NONCLUSTERED INDEX [IX_Tokens] ON [dbo].[Tokens]
(
[Token] ASC
)WITH (PAD_INDEX = OFF, STATISTICS_NORECOMPUTE = OFF, SORT_IN_TEMPDB = OFF, IGNORE_DUP_KEY = ON, DROP_EXISTING = OFF, ONLINE = OFF, ALLOW_ROW_LOCKS = ON, ALLOW_PAGE_LOCKS = ON) ON [PRIMARY]
GO
CREATE FUNCTION [dbo].[SplitTokenList]
(
@TokenList varchar(max)
)
RETURNS
@ParsedList table
(
Token varchar(255)
)
AS
BEGIN
DECLARE @Token varchar(50), @Pos int
SET @TokenList = LTRIM(RTRIM(@TokenList ))+ ','
SET @Pos = CHARINDEX(',', @TokenList , 1)
IF REPLACE(@TokenList , ',', '') <> ''
BEGIN
WHILE @Pos > 0
BEGIN
SET @Token = LTRIM(RTRIM(LEFT(@TokenList, @Pos - 1)))
IF @Token <> ''
BEGIN
INSERT INTO @ParsedList (Token)
VALUES (@Token) --Use Appropriate conversion
END
SET @TokenList = RIGHT(@TokenList, LEN(@TokenList) - @Pos)
SET @Pos = CHARINDEX(',', @TokenList, 1)
END
END
RETURN
END
GO
CREATE PROCEDURE [dbo].[procStoreAndUpdateTokenList]
@TokenList varchar(max)
AS
BEGIN
SET NOCOUNT ON;
create table #Tokens (TokenID int default 0, Token varchar(50))
create clustered index Tind on #T (Token)
DECLARE @NewTokens table
(
TokenID int default 0,
Token varchar(50)
)
--Split ID's into a table
INSERT INTO #Tokens(Token)
SELECT Token FROM SplitTokenList(@TokenList)
BEGIN TRY
BEGIN TRANSACTION
--get ID's for any existing tokens
UPDATE #Tokens SET TokenID = ISNULL( t.TokenID ,0)
FROM #Tokens tl INNER JOIN Tokens t ON tl.Token = t.Token
INSERT INTO Tokens(Token)
OUTPUT INSERTED.TokenID, INSERTED.Token INTO @NewTokens
SELECT DISTINCT Token FROM #Tokens WHERE TokenID = 0
return the list with id for new and old
SELECT TokenID, Token FROM #Tokens
WHERE TokenID <> 0
UNION
SELECT TokenID, Token FROM @Tokens
COMMIT TRANSACTION
END TRY
BEGIN CATCH
DECLARE @er nvarchar(max)
SET @er = ERROR_MESSAGE();
RAISERROR(@er, 14,1);
ROLLBACK TRAN
END CATCH;
END
GO
Generate Dates Between Two Dates
Nov 8, 2006Hi,
I have a table which records employees'time-off records. There are 6 columns in this TimeOff table. They are RequestID, EmpName, StartDate, EndDate, Type, NumofDays. I have another table which has all the dates from 01/01/1950 to 01/01/2056.
I am trying write a query which lists all the dates between the timeoff startdate and enddate, including the the start and end dates, but my query so far only lists the start and end date in a timeoff record:
SELECT D.[Date], Datename(dw,D.[Date]) AS Weekday
FROM Dates D LEFT JOIN TimeOff T ON D.[Date] = T.OffStartDate OR D.[Date] = T.OffEndDate
WHERE (OffType = 'Sick Day' AND EmpName = 'Cat White') AND (D.[Date] BETWEEN T.StartDate AND T.EndDate)
Any advice will be greatly appreciated!
Getting Individual Dates Between 2 Dates
Mar 4, 2008Has anyone ever written a function to retrieve all individual dates between two given dates? Using DATEDIFF I can get the number of days between two dates. However I need to iterate through the days to identify weekend and holiday dates. Has anyone ever written a function to do this?
So, if select datediff(d,'07/01/2007','07/15/2007') as NumOfDays returns 14, I'd need to iterate through the 14 days and get the weekends and holidays. Would I have to use a cursor to iterate through the days?
ERROR: A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List.
May 22, 2006Hi,
I have set of 2 DTS packages, one of which calls the other by forming a command-line (dtexec) using a Execute Process task.
From the parent package-> Execute Process Task->
dtsexec /F etc... /<pkg variable> = "servername"
Each of the parent and the called package have a variable: "User::DWServerSQLInstance" which is mapped to the SQL server connection manager server name property using an expression. The outer package has the above variable and so does the inner called package (which gets assigned through the command line from the outerpackage call to inner)
I "sometimes" get the following error:
OnError,I4,TESTDOMAdministrator,ACDWAggregation,{A1F8E43F-15F1-4685-8C18-6866AB31E62B},{77B2F3C7-6756-46EB-8C01-D880598FB4B3},5/22/2006 5:10:28 PM,5/22/2006 5:10:28 PM,-1073659822,0x,The variable "User::DWServerSQLInstance" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
Help would be appreciated!
I have seen other posts on this but, not able to relate the solution to my scenario.
A Variable May Only Be Added Once To Either The Read Lock List Or The Write Lock List
May 10, 2006Hi All,
I have seen a few other people have this error.
Package works fine when run from BIDS, DTExec, dtexecui. When I schedule it, It get these random errors. (See below)
The main culprit is a variable called "RecordsetFileDIR" which is set using an expression. (@[User::_ROOT] + "RecordSets\")
A number of other variables use this as part of their expression and as they all fail, pretty much everything dies.
I have installed SP1 (Not Beta) on server. Package uses config files to set the value of _ROOT.
The error does not always seem to be with this particular variable though. Always a variable that uses an expression but errors are random. Also, It will run 3 out of 10 times without a problem. I am the only person on the server at the time.
Any ideas?
Cheers,
Crispin
Error log:
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073659822,0x,The variable "User::RecordsetFileDIR" is already on the read list. A variable may only be added once to either the read lock list or the write lock list.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073639420,0x,The expression for variable "rsHeaderFile" failed evaluation. There was an error in the expression.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636247,0x,Accessing variable "User::rsHeaderFile" failed with error code 0xC00470EA.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1071636390,0x,The file name is not properly specified. Supply the path and name to the raw file either directly in the FileName property or by specifying a variable in the FileNameVariable property.
OnError,,,DF_Header_Header,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Move All Data,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,Load Open Batches and Process Files,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
OnError,,,POSBasketImport,,,10/05/2006 12:03:34,10/05/2006 12:03:34,-1073450901,0x,"component "rsHeader" (365)" failed validation and returned validation status "VS_ISBROKEN".
Generating Numbers In SQL
Jan 19, 2004hi,
I am developing a ASP.NET application using SQL Server as my database.
I want to create a number that is unique.
The number will have 8 digits.
first 2 digits correspond to year. ex:04 or 03
the next 6 digits start with 000001 and it should get added for each new entry of data.
i am not able to generate number in the way i said. I am relatively new to SQL. so any suggestions as how to go about solving the problem???. Are there any samples/codes available for this.
Any help would be highly appreciated.
thanks,
-sriram
Generating SQL Script
May 31, 2001Hi all,
I have generated an SQL script such that when it is run, it will automatically create tables if not existing or drop the existing tables. The problem I have is that, is there any way I can also make the script create not only the tables but also transfer the data from the old database to the new database?
I would really appreciate if any of you could point me to any existing programs, scripts etc that can do that. Thanks in advance
Regards,
Celia
Generating SQL Scripts
Oct 8, 1999Is there a way to generate SQL Scripts from a stored procedure?
For disaster recovery and documenation reasons, we'd like to create scripts of our databases periodically. I, being somewhat lazy, would like to automate this so I really don't have to remember to run this every so often.
Any help would be appreciated.
Generating SQL Scripts
Jun 7, 1999Is there a way to generate SQL scripts from other than SQL Enterprise Manager?
View 3 Replies View RelatedGenerating Nested XML
Oct 29, 2014I must produce an XML file with this layout:
Code:
<root>
<dataroot>
<Professions>
<Profession>web designer</Profession>
<tags>
<tag>Ruby on Rails</tag>
<tag>Apache</tag>
<tag>HTML/CSS</tag>
[code]...
I can't get my head around it ..I've even tried to solve it by using FOR XML RAW.