Is there a function in SQL Server 2005 that can add GMT deviation hours to the existing date. I have a data field with the GMT_Deviation_Hours listed in numeric format e.g. -1, 12 etc. I have another date field to whom i wish to deviate the datetime according to the GMT_Deviation hours.
Thanks
My question here is whether or not MS SQL is processing joins according to the ANSI SQL standard. The situation is this, a friend of mine has the following query (The definition for the tables and the data in them are at the end of the message):
SELECT t.*, v.*
FROM Table3 T LEFT OUTER JOIN
TableView V ON T.tx = V.tx
WHERE V.tx IS NULL and V.part IN (1,2)
My friend is implying that the OUTER join takes precedence over the WHERE clause and should return ALL rows from table3 that don't exist in the view. The view, as you will see below, is a partitioned view. My contention is that the proper join processing is to join the tables first and then apply the WHERE clause to that result set (regardless of the join type). In my friend's case, he expects this query to return four rows. My expectation is that it will return zero rows, because in the result set after the join is performed there are no rows that have a NULL in the v.tx column AND 1 or 2 in the v.part column. The actual ouput agrees with my premise and my friend is sure that this is not proper ANSI SQL join processing. Is this proper ANSI join processing or is MS SQL deviating from the standard?
/************************************************** **********************/
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table1]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table1]
GO
CREATE TABLE [dbo].[Table1] (
[Part] [tinyint] NOT NULL ,
[id] [int] NOT NULL ,
[tx] [INT] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD
CONSTRAINT [PK_Table1] PRIMARY KEY CLUSTERED
(
[Part],
[id]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table1] WITH CHECK ADD
CONSTRAINT [CK_Table1] CHECK ([Part] = 1)
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table2]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table2]
GO
CREATE TABLE [dbo].[Table2] (
[Part] [tinyint] NOT NULL ,
[id] [int] NOT NULL ,
[tx] [INT] NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table2] WITH CHECK ADD
CONSTRAINT [PK_Table2] PRIMARY KEY CLUSTERED
(
[Part],
[id]
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table2] WITH CHECK ADD
CONSTRAINT [CK_Table2] CHECK ([Part] = 2)
GO
if exists (select * from dbo.sysobjects where id = object_id(N'[dbo].[Table3]') and OBJECTPROPERTY(id, N'IsUserTable') = 1)
drop table [dbo].[Table3]
GO
CREATE TABLE [dbo].[Table3] (
[tx] [int] NOT NULL
) ON [PRIMARY]
GO
ALTER TABLE [dbo].[Table3] WITH CHECK ADD
CONSTRAINT [PK_Table3] PRIMARY KEY CLUSTERED
(
[tx]
) ON [PRIMARY]
GO
--DROP VIEW TableView
CREATE VIEW TableView AS
SELECT * FROM Table1
UNION ALL
SELECT * FROM Table2
GO
INSERT TableView (Part,Id,Tx) VALUES (1,1,1)
INSERT TableView (Part,Id,Tx) VALUES (1,2,2)
INSERT TableView (Part,Id,Tx) VALUES (1,3,NULL)
INSERT TableView (Part,Id,Tx) VALUES (2,4,4)
INSERT TableView (Part,Id,Tx) VALUES (2,5,5)
INSERT TableView (Part,Id,Tx) VALUES (2,6,NULL)
INSERT Table3 (tx) VALUES (1)
INSERT Table3 (tx) VALUES (2)
INSERT Table3 (tx) VALUES (3)
INSERT Table3 (tx) VALUES (4)
INSERT Table3 (tx) VALUES (5)
INSERT Table3 (tx) VALUES (6)
INSERT Table3 (tx) VALUES (7)
INSERT Table3 (tx) VALUES (8)
GO
Hi All,
I want to create following matrix report on SSRS.
Yearmonth
Jan-07
Feb-07
Mar-07
Apr-07
May-07
Sales
Deviation
Sales
Deviation
Sales
Deviation
Sales
Deviation
Sales
Deviation
Product
X1
100
0
110
10
130
20
100
-30
90
-10
Here the Problem is i want calculate Deviation:
Deviation for Feb 07= Sales in Feb - Sales In Jan
Deviation For Mar 07 = Sales in Mar - Sales in Feb.
I don't know how to apply formula in Matrix:
Is anybody hele me???
Thank You.
Balwant Patel.
I want to display Days Hours Mins Format.
I am Having two columns Like below,
Col1 (in days) col2 (In Hours : Mins)
3days 4:5
In this first have to add Col1 and Col2 (Here one day is equals to 9 hours ) so the addition is 31.5
From this 31.5 I should display 3 Days 4 Hours 30 Mins because 31.5 contains 3 (9 hours) days 4 Hours and .5 is equals to 30 mins.
I have data coming from a telephony system that keeps track of when anemployee makes a phone call to conduct a survey and which project numberis being billed for the time the employee spends on that phone call in aMS SQL Server 2000 database (which I don't own).The data is being returned to me in a view (see DDL for w_HR_Call_Logbelow). I link to this view in MS access through ODBC to create alinked table. I have my own view in Access that converts the integernumbers for start and end date to Date/Time and inserts some otherinformation i need.This data is eventually going to be compared with data from someelectronic timesheets for purposes of comparing entered hours vs hoursactually spent on the telephone, and the people that will be viewing thedata need the total time on the telephone as wall as that total brokendown by day/evening and weekend. Getting weekend durations is easyenough (see SQL for qryTelephonyData below), but I was wondering ifanyone knew of efficient set-based methods for doing a day/eveningbreakdown of some duration given a start date and end date (with theday/evening boundary being 17:59:59)? My impression is that to do thiscorrectly (i.e., handle employees working in different time zones,adjusting for DST, and figuring out what the boundary is for switchingfrom evening back to day) will require procedural code (probably inVisual Basic or VBA).However, if there are set-based algorithms that can accomplish it inSQL, I'd like to explore those, as well. Can anyone give any pointers?Thanks.--DDL for view in MS SQL 2000 database:CREATE VIEW dbo.w_HR_Call_LogASSELECT TOP 100 PERCENT dbo.TRCUsers.WinsID, dbo.users.username ASInitials, dbo.billing.startdate, dbo.billing.startdate +dbo.billing.duration AS EndDate,dbo.billing.duration, dbo.projects.name ASPrjName, dbo.w_GetCallTrackProject6ID(dbo.projects.descript ion) AS ProjID6,dbo.w_GetCallTrackProject10ID(dbo.projects.descrip tion) AS ProjID10,dbo.billing.interactionidFROM dbo.projects INNER JOINdbo.projectsphone INNER JOINdbo.users INNER JOINdbo.TRCUsers ON dbo.users.userid =dbo.TRCUsers.UserID INNER JOINdbo.billing ON dbo.users.userid =dbo.billing.userid ON dbo.projectsphone.projectid =dbo.billing.projectid ONdbo.projects.projectid = dbo.projectsphone.projectidWHERE (dbo.billing.userid 0)ORDER BY dbo.billing.startdateI don't have acess to the tables, but the fields in the view comethrough as the following data types:WinsID - varchar(10)Initials - varchar(30)startdate - long integer (seconds since 1970-01-01 00:00:00)enddate - long integer (seconds since 1970-01-01 00:00:00)duration - long integer (enddate - startdate)ProjID10 - varchar(15)interactionid - varchar(255) (the identifier for this phone call)MS Access SQL statement for qryTelephonyData (based on the view,w_HR_Call_Log):SELECT dbo_w_HR_Call_Log.WinsID, dbo_w_HR_Call_Log.ProjID10,FORMAT(CDATE(DATEADD('s',startdate-(5*60*60),'01-01-197000:00:00')),"yyyy-mm-dd") AS HoursDate,CDATE(DATEADD('s',startdate-(5*60*60),'01-01-1970 00:00:00')) ASStartDT,CDATE(DATEADD('s',enddate-(5*60*60),'01-01-1970 00:00:00')) AS EndDT,DatePart('w',[StartDT]) AS StartDTDayOfWeek, Duration,IIf(StartDTDayOfWeek=1 Or StartDTDayOfWeek=7,Duration,0) ASWeekendSeconds,FROM dbo_w_HR_Call_LogWHERE WinsID<>'0'
View 3 Replies View RelatedI have a report that calculates mean, min, max, stddev of somer exercises for a class (pushups, situps, trunk lifts, etc). I also have to calculate those for the 1-mile run time (ex: data -- 7:56, 6:35, 9:45 ( in minuteseconds). Obviously the standard Avg(), Min(), Max(), StdDev() functions won't work for time. So I put in some custom code to convert the time to seconds so I can use the standard functions on the seconds and also code to convert that answer back to minuteseconds. Max() works, but for example when I try to calculate the min(), it includes nulls from the dataset as zeros (not every student has to do the mile run). So the min is always 0. How can I exclude nulls from being calculated. The min() function excludes nulls so it returns the correct min() on integer data. What else can I do?
View 3 Replies View RelatedI have below table structure
DECLARE @table Customer (Date DATE, CustomerID VARCHAR(5))
INSERT INTO @Customer (Date, CustomerID) VALUES
('2/6/2015','ADXPA'),
('2/6/2015','AKXLV'),
('2/7/2015','CPDYA'),
('2/7/2015','ZXDQW'),
('2/8/2015','LK1MP'),
etc, till 3836 Records for '2/8/2015' and 4869 Records for '2/8/2015' etc...
Now, I want to take the records which are meeting the standard deviation value of count of CustomerIDs in the group.
Date Count of Customers Avg. Count STD DEV
2/6/2015 2 3944.07 1849.61
2/7/2015 2 3944.07 1849.61
2/8/2015 3836 3944.07 1849.61
2/9/2015 4869 3944.07 1849.61
[Code] ....
Here I want to filter out +/- STDDEV of Average - So I need to filter out rows with dates 2/6/2015, 2/7/2015 and 2/16/2015 since these values not in the range of +/- STDDEV of Average.
Here CustomerID is Varchar type, So we need to convert them to Count first partitioning the Date Column and take the average and STDDEV of all without any partition...
I have a float variable that holds a decimal number of hours.
So 1.5 equals 1 hour 30 minutes.
I need to change this to the format 1:30
Any idea how to do this?
We have a few Servers that have space issues that need full DB Backups every day. As a result, we have to carefully watch how many DB Backup files we keep on the Server. On the Maintenance Plan, if I set the 'Delete files older than:' to '1' 'Day', will this delete anything over 24 hours old? What I have noticed, is that it tends to delete on Tuesday anything that was created on Sunday, but not Monday. Therefore, I am assuming that instead of '1 Day' being 24 hours, it is anything less than 47 hours and 59 minutes...
Is my assumption correct or do I need to look at something else. Thanks!
Billy
SELECT sysjobs.name, sysjobservers.last_run_outcome, CONVERT(varchar(8), sysjobservers.last_run_date, 112) AS LastRunDate, CONVERT(varchar(8),
sysjobservers.last_run_time, 8) AS LastRunTime, GETDATE() AS CurrentDateTime
FROM sysjobs LEFT OUTER JOIN
sysjobservers ON sysjobs.job_id = sysjobservers.job_id
WHERE (sysjobservers.last_run_outcome = 0) AND (CONVERT(varchar(8), sysjobservers.last_run_date, 112) >= DATEADD(day, - 1, GETDATE()))
I am wanting a similar solution, I need to convert an "int" to a time format, when I use this where ">= DATEADD(minute, - 720, GETDATE())" for the last_run_time I get this error:
Syntax error converting datetime from character string.
I ran the following:
ALTER TABLE Recipients ADD Obscene BIT NOT NULL DEFAULT 0
On a table with 80 million records. It's been running for 8 hours and counting now. This is ridiculous. No one else is using this server.
Server configuration:
SQL Server 2000 Enterprise Edition with SP3a
2 GB RAM
3.0 GHz P4 with hyperthreading
SCSI RAID
Any ideas why this is taking so long? Can I find out what it's doing? Is there anything I can do to make it go faster?
My database is current 135GB. I have been running the following:
DBCC SHRINKFILE([database_data],2)
DBCC SHRINKDATABASE ( [Database],20,TRUNCATEONLY)
It's been running for 28 hours. Should it be taking this long? If I stop the shrink, will it need to rollback?
Thanks!
I have a job that runs between the hours of 10 PM and 9 AM. It launches a controller stored procedure that will call other stored procedure until the entire process is done.I would like the controlling stored procedure to only call the steps between the hours of 10PM and 9AM also.. So at 8:59 AM it will start the next step, but at 9:00 AM it will exit.
View 6 Replies View RelatedI use SQL 2K with an Access 2000 project as front end. I have four date fields in a table. The first one should contain a date (eg 20th of February), the second one a starting hour (eg 8:00h), the third one the finishing hour (eg 10:00h) and the fourth should calculate the difference between the second and third column.
So I created four datetime fields. Storing a date in the first column is no problem, but storing only hours doesn't seem to do what I want. When I enter 8:00 from within the Access, it is stored 1/1/1900 8:00 in SQL Server. How can I make sure that the hours are saved with the date of the second column, so either as 8:00 without further information or as eg 20-2-2004 8:00?
I am querying a database that has hours worked listed by pay rate. I want to return sum of hours per pay rates I have been given but hours are stored in multiple columns. So If I run the below query for one worker it returns.
HoursBill_rate_1 Hours_2Bill_rate_2
34.2610.26 0.000.00
5.7410.26 5.689.67
I want to report to the business:
40hrs 10.26
5.68 9.67
The query I have written is below:
Select Sum(Hours_1) As Hours,Bill_rate_1,Sum(Hours_2) as Hours_2,Bill_rate_2--,Hours_3,Bill_rate_3
From Valid_Timesheets
Where (Department = '938' and tax_period = 3 and tax_year = 2015 AND PERSONNEL_REF = '991A001198') and
((Bill_Rate_1 = £10.26 or
Bill_Rate_1 = £9.67 or
Bill_Rate_1 = £8.27 or
[Code] ....
Hi,I have the following query:SELECT p.employee_code, p.employee_name,CONVERT(VARCHAR(12),t.tran_date,101) AS TranDate,CONVERT(VARCHAR(12),t.post_date,101) AS PostDate, SUM(tobill_hrs) ASTotalHoursFROM tat_time t, hbm_persnl pWHERE t.tk_empl_uno = p.empl_uno AND t.tran_date BETWEEN '2005-03-01'AND '2005-03-31' AND p.employee_code IN ('0340')GROUP BY p.employee_code, p.employee_name, t.tran_date, t.post_dateORDER BY p.employee_codeI would like to sum the tobill_hrs by week (Monday-Sunday) instead ofby day. For instance the user will put in a date range (a from dateand to date).Is this possible to do?Thanks!
View 9 Replies View RelatedI am creating a report that has call duration and if i run it over amulti-day span the duration is limited to 24 hours and starts over atzero. is there a way to not limit hours?I am usign the following in my select statement:convert(varchar(12), dateadd(s,SUM(ISNULL(Calls.OutgoingCallDuration,0)), '19900101'), 108) AS[Outgoing Call Duration]
View 3 Replies View RelatedHi, i have this problem :
I have to compare 1 hour between two days , example:
I have this datetime value (BitacoraProcesoUsuario.FechaInicioProceso) in 108 format : 23:35:22
and I make this query:
Select TOP 100 * from BitacoraProcesoUsuario
INNER JOIN Turno
ON convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) > = '24:00:00'
AND convert(varchar,BitacoraProcesoUsuario.FechaInicioProceso,108) <= '06:29:00'
and returns nothing........ this because 23:35:22 is gtreater than 06:29:00' value, my question is how can I compare this hours in this format.
Regards
Would you help me ?
In the example below, how can I do to have count = 9 ?
It means that I have 9 periods of 30 minuts from 09:00 to 13:30.
Thank you.
declare initial_hour as varchar(10)
declare final_hour as varchar(10)
declare per30min as varchar(10)
declare count as int
set initial_hour = '09:00'
set final_hour = '13:30'
set per30min = '0:30'
set count = (final_hour - initial_hour) / per30min ------>>> count = 9
I would like to know the best method or the simplest method to do the following. Take a datetime value and subtract a given number of hours. I am taking a UTC time and subtracting a given number or hours in a query. I seem to be getting mixed results.
Thanks
Hi,
I need to make a select getDate() subtracting 4 hours...
How can I make it ???
Thanks
What is the best data type to use when tracking hours, for example;
2.30 < this is stored in DB
(two hours and thirty minutes)
5.15 < this is stored in DB
(5 hours and fifteen minutes)
MS SQLJust to confirm, I need to store the number of hours a user has spent doing something, am I correct using the smalldatetime field for the MS SQL database?I will eventually need to be able to calculate totals using SQL Reporting Services so it's important that the hours add up correctly (to 60 minutes, not 100).ASP.NETI'm trying to find the correct sort of formatting to use? Short time stores the time as 9:50AM, which isn't what i'm after.I need to store the hours as in 1 hour, or 01:00:00 (1 hour, 0 minutes, 0 seconds) or just 01:00 for 1 hour. I do need minutes but seconds are not required.I can't find the right formatting for this, would Long time be more suited?
View 18 Replies View Relatedits possible make a procedure or something inside the sql server to run every 5 hour?? to make a update of a table
View 2 Replies View RelatedI have a SQL 7.0 backend for a new DB of mine. This is the first time I
have developed a SQL backend from scratch, so the problem may be my design.
The problem may lie with my Access frontend (I have tried both 97 and 2k),
but I am inclined to think not considering the behavior.
On only one table (the master table no less), I cannot add records during
business hours. I can add records to other tables and edit records on this
table though. This troublesome table has a field indexed as unique that is
not the PK (don't know if that has any bearing, but it is the only table in
this DB that has that property).
The adding records problem appears to be network traffic related because
sometimes records can be added at lunchtime and definitely after hours. I currently only have 3 connected users. I had these problems with only one connected user, so the DB itself is not being strained by traffic. I often have more traffic on the DB after hours to avoid the problems. I have worked on the connection and network traffic angle for awhile, when I stumbled upon the bizarre part. If I add a record via a stored procedure and run this SP on the SQL query analyzer on the server (no network is involved) it is still slow to add the record (30 minutes or more). Needless to say this would equate to an failure on the front end. The same query will run in 0-3 seconds after hours!
Does anyone have any clue how this could happen? I am stumped.
I do have a budget for a consultant if I need one, but I need to find
someone who has a chance to fix this problem. If you don't know the answer
but can refer someone in the DFW area, I am in your debt.
Debbie
I am trying to calculate business hours that an order that is open. The rules are 8am-5pm. For instance the first row, the clock would stop at 17:00, and pick up again at 8am and add on to total business hours. If the order was created after business hours, and the endstamp was before business hours, this would be 0. If created after 5pm friday, and the endstamp was before 8am monday, this would be 0. In the second set of timestamps I have here the order was recieved at 14:39 but took until the following day at 14:49 to be ordered. I imagine I have to use datepart and datediff for this, but other than that I am not sure on how to do it. Any help would really be appreciated!
StartStampEndstamp
6/27/2005 14:356/27/2005 17:41:11
6/27/2005 14:396/28/2005 14:49
6/27/2005 18:486/27/2005 18:54
6/27/2005 11:416/27/2005 11:45
hello this is my store procedure and i want to set the hour of the first date to be 00:00:00 and the hour of the second date to be 23:59:59 but i don't know how to do this,so please HELP me
CREATE PROCEDURE dbo.Proba
@date1 smalldatetime ,
@date2 smalldatetime,
@s float output
AS
Select @s=sum(Pay) from RKO where Dates between @date1 AND @date2
GO
Hi,
I'd like a function that returns the number of hours in a specific month (or the number of days which I could then multiply by 24). The function would have to consider leap years for February.
Any ideas?
Thanks,
Skip.
I previously posted about a problem where I added a non-NULL DEFAULT 0 bit column to a table with 80 million records. It was taking a LONG time and we needed that database up fast. It ended up taking a total of 17 hours.
Now my coworker added the same non-NULL DEFAULT 0 bit column to another table on another important server. But this table has more like 400 million rows. It's been running for 100+ hours and is still going. We were hoping it would scale linearly (5*80 million records would hopefully take 5*17 hours) but that isn't happening. I have no idea how much longer it will take. I really need this to be done. I'm tempted to cancel but that will incur a potentially massive rollback, right? Any guestimate on how large that would be?
Any ideas?
This code displays records by the the month they where recorded and displays the months as names (January...)
How can I do the Same for Days (Mon, Tues) and Hours (9.00,10.00)
Select DATENAME(mm,dDate) as Month, count(iStatID) as Total_Po
from ListingStats
Group by DATENAME(mm,dDate)
Order by DATENAME(mm,dDate)
Hi everybody,
Can anyone help me out in deleting files more than n- hours from a physical folder using xp_cmdshell ....
I am attempting to compute Service Levels for an interaction based upon business hours. For example, an email arrives at 4pm and is handled the following day at 10am. Call Center Hours are 8-5.
Essentially I have a number of different alternatives, and have found some potential solutions, including:
www.dbforums.com/arch/7/2003/9/914261
However, my situation has a couple of additional twists to the standard 8hrs of business M-F. The call center is open different hours depending upon the day of the week. For example, 8-5 M, 10-7 T, 8-5 W Th F, 10-2 Sat, 10-12 Sun
Additionally, I would like to remove Holiday's from the calculation for service level as well.
I have explored a number of different table DTD's, but none seem to be a perfect fit for determining the number of "open" hours between when an interaction arrived, and when it was handled.
The DTD I have for the Holiday table is as follows:
CREATE Table Holidays (HolidayDate DateTime)
GO
Insert Into Holidays (HolidayDate) Values ('12-25-2004')
Please let me know what you feel would be the DTD for storing the business hours and also the query for extracting the number of Open hours between two dates
Thank you in advance
I have two field and I need to find the sum I guess of them. One is called the clm_dout (process date) and the other one is clm_rcvd (received Date). These are both date and time fields and it looks like this 2006-03-17 00:00:00.000. I need to create a formula that wiil i guess give me the difference and create it into hour and minutes because I an trying to create a turn around report. this is what I had...
TimeValue({clm_doubt}-{clm_rcvd})
This is not working for me. Can someone give me a suggestion please.
Thanks!