Generate Result Using Nested Loop And Variables
Dec 3, 2013How can I generate the following result using nested loop and variables :
col1col2
15
16
17
25
26
27
35
36
37
45
46
47
ADVERTISEMENT
End Result Is Main Query Results Ordered By Nested Result
May 1, 2008As the topic suggests I need the end results to show a list of shows and their dates ordered by date DESC.
Tables I have are structured as follows:
SHOWS
showID
showTitle
SHOWACCESS
showID
remoteID
VIDEOS
videoDate
showID
SQL is as follows:
SELECT shows.showID AS showID, shows.showTitle AS showTitle,
(SELECT MAX(videos.videoFilmDate) AS vidDate FROM videos WHERE videos.showID = shows.showID)
FROM shows, showAccess
WHERE shows.showID = showAccess.showID
AND showAccess.remoteID=21
ORDER BY vidDate DESC;
I had it ordering by showTitle and it worked fine, but I need it to order by vidDate.
Can anyone shed some light on where I am going wrong?
thanks
Nested While Loop
Dec 10, 2004Hi there. I want to avoid a cursur using a quite basing nested while loop. The problem is, that the outer index-variable (i) won't increment at all while the inner loop works perfectly.
This one should be quite easy to solve I guess, I'd be very happy if someone could give me a hint what I should try, though because I don't know what to try. The manual didn't help me much either, using CONTINUE and BREAKs didn't solve this problem for me.
My code:
DECLARE @i INTEGER
DECLARE @j INTEGER
SET @i = 1
SET @j = 0
WHILE(@i<= 10) BEGIN
WHILE(@j <= 100) BEGIN
SELECT @i, @j, COUNT(*) as anz FROM mytable WHERE dim1 = @i AND dim2 = @j
SET @j = @j + 1
END
SET @i = @i + 1
END
Thanks a lot for your help :)
Bernhard
corrected typo...
Nested Loop Function
Jul 30, 2007I want to know how to create a recursive loop/function in SQL, I can’t seem to figure out how to do it.
The database table I am working with is simply the following:
SeedID, ThisParentSeedID
1, 0
2, 1
3, 1
4, 2
5, 4
6, 5
7, 6
8, 7
9, 7
10, 7
11, 10
12, 0
13, 0
14, 0
The example table above shows that SeedID 1 = the parent level of the data. SeedID 2 and 3 are children of SeedID 1, 4 is child of 2, 5 is child of 4... 12 13 and 14 are also parent levels (they are not children of anything).
I want to know how to create a SQL script that is “object oriented� in that I will not have to create as many levels of nested scripts as there are nested “children� in the data.
What I am wanting to figure out is, with a single script, “which sub-children are assigned to [@SeedID]�? So if this script was called, and @SeedID = 1, it would return (2,3,4,5,6,7,8,9,10,11). If @SeedID = 12, it would return null. If @SeedID = 7, it would return (8,9,10,11)
I have tried to keep my question and data as simple as possible for the sake of getting some feedback or help. If you want me to clarify or explain better, please ask me to!
Nested Loop In SQL Query
Nov 1, 2005Hi,I'm probably missing something obvious (either that or doing this totally wrong).I'm trying to use a nested loop to generate the following results:Unit Day1 Day2 Day3 Day4 Day5Name1 25 45 89 54 76Name2 48 54 81 74 98What I have so far is this:WHILE @FCount < @TotalFoodUnitsBEGINSELECT (SELECT Unit FROM tbl_acc_FoodVenues WHERE UnitID = (@FCount + 1)) AS Unit WHILE @FDCount < @Days BEGIN SELECT (SELECT FdRevenue_a FROM tbl_acc_aud_SportsAudits WHERE AudDate = DATEADD(day, @FDCount, @pdStartDate)) AS Rev SET @FDCount = @FDCount + 1 END SET @FCount = @FCount + 1ENDAny suggestions please
View 3 Replies View RelatedNested Loop Join
Jan 26, 2006Hi,
I have came across a situation -
When there are no indices on the tables and if we force SQL server to use the "Nested Loop" joins, the query becomes very slow. Since there are no indices then Nested loop join should not be used.
The background for this problem is -
Analysis services is sending some query to SQL server while doing the cube processing. SQL server is using Nested loop joins even though there are no indices on any of the tables. Is there any way by which we can force the SQL server/Analysis services not to use Nested loop joins since there are no indices in any of the tables.
regards,
datta.
Nested Loop Joins
Jan 26, 2006Hi,
I have came across a situation -
When there are no indices on the tables and if we force SQL server to use the "Nested Loop" joins, the query becomes very slow. Since there are no indices then Nested loop join should not be used.
The background for this problem is -
Analysis services is sending some query to SQL server while doing the cube processing. SQL server is using Nested loop joins even though there are no indices on any of the tables. Is there any way by which we can force the SQL server/Analysis services not to use Nested loop joins since there are no indices in any of the tables.
regards,
datta.
Nested Loop Join - Need Help :)
Mar 31, 2006i'm running the following code on Ms SQL Server 2000, Query Analyzer to analyze the result of Nested Loop Join.
SET STATISTICS PROFILE ON
GO
SELECT pdN.ProductID, pdN.ProductName,
spN.CompanyName, spN.ContactName
FROM dbo.ProductsNew pdN
INNER JOIN dbo.SuppliersNew spN
ON pdN.SupplierId = spN.SupplierId
GO
but the execution plan give me the following result :-
http://i31.photobucket.com/albums/c366/i3lu3fun/executionplan.jpg
instead of using nested, why does it using hash join? is there anything wrong with my code?
Imitating Nested For Each Loop In SQL Query
May 25, 2007Dear All,
I need to create a query to list all the subfolders within a folder.
I have a database table that lists the usual properties of each of the folder.
I have another database table that has two columns
1. Parent folder
2. Child folder
But this table maintains the parent child relationship only to one level.
For example if i have a folder X that has a subfolder Y and Z.
And Y has subfolders A and B.
and B has subfolder C and D
and C has subfolder E and F
The database table will look like
parentfolder child folder
X Y
X Z
Y A
Y B
B C
B D
C E
C F
I want to write a query which will take a folder name as the input and will provide me a list of all the folders and subfolders under it. The query should be based on the table (parent - child) and there should not be any restriction on the subfolder levels to search and report for.
I have been banging my head to do this but i have failed so far. Any help on this will be highly appreciated.
Whats Wrong With This Nested While Loop?
Jul 20, 2005Im getting way too many rows retured..what its trying to do is inserta 0 for revenue for months 7 - 12 (aka July through December) for eachof these cost centers for each payor type..Im getting a lot of repeatsand the concatenation field date always comes back as January 2003instead of the month and date its supposed to--Fiscal Yeardeclare @year smallintset @year = 2004--Month number the Fiscal year starts and endsdeclare @month smallintset @month = 7--Place holder for number of costcentersdeclare @cccounter smallint--loop counter for cost centersdeclare @ccount smallintset @ccount = 1--Place holder for number of payor typesdeclare @ptcounter smallint--loop counter for payor typesdeclare @pcount smallintset @pcount = 1--Temp table to store the blank values for all cost centers/payortypes for the fiscal yeardeclare @Recorded_Revenue_tmp table(Revenue money default 0,[Date] varchar(15),monthn smallint,yearn smallint,[CostCenter] varchar(50),[PayorType] varchar(50))--Temp table to store the values of the cost centersdeclare @costcenter_tmp table(ccid int IDENTITY (1,1),ccname varchar(50))--Inserts cost centers and code into the @costcenter_tmp temp tableinsert into @costcenter_tmp (ccname) select costcenter.fullname + ' '+ costcenter.code from costcenter, agency_cost_centerwhere costcenter.oid = agency_cost_center.cost_center_moniker--Sets the @cccounter variable to the number of cost centersselect @cccounter = count(*) from @costcenter_tmp--Temp table to store the values of the payor typesdeclare @payor_type_tmp table(ptid int identity (1,1),ptname varchar(50))--Inserts payor types into the @payor_type_tmp temp tableInsert into @payor_type_tmp(ptname)select fullname from payor_type,payorwhere payor_type.oid = payor.payor_type_moniker--Sets the @ptcounter variable to the number of payor typesselect @ptcounter = count(*) from @payor_type_tmp--Loop that gets the first part of the fiscal yearWhile (@month <13)begin--Loop that gets the value of the cost center to insertWhile (@ccount <= @cccounter)begin--Loop that inserts values for the first part of the fiscal year intothe @Recorded_Revenue_tmp temp tablewhile (@pcount <= @ptcounter)beginInsert into @Recorded_Revenue_tmp(Revenue, [Date], monthn,yearn,[CostCenter],[PayorType])select 0, datename(month, @month)+ ' ' + cast(@year -1 as varchar(4)),@month, @year -1, ccname, ptnamefrom @costcenter_tmp ct,@payor_type_tmp pt where ct.ccid = @ccount andpt.ptid = @pcountset @pcount = @pcount + 1endset @pcount = 1set @ccount = @ccount + 1endset @ccount = 1set @month = @month + 1endselect * from @Recorded_Revenue_tmpsample return data:(returns 16008 rows!!!)..0000January 200372003Genesis Assertive Community Treatment Team250SAGA..0000January 200372003Genesis Assertive Community Treatment Team250Self Pay..0000January 200372003Genesis Assertive Community Treatment Team250ABH..0000January 200372003Genesis Assertive Community Treatment Team250Managed Medicaid..0000January 200372003Genesis Assertive Community Treatment Team250Managed Medicaid..0000January 200372003Genesis Assertive Community Treatment Team250Managed Medicaid..0000January 200372003Genesis Assertive Community Treatment Team250Managed Medicaid..0000January 200372003Genesis Assertive Community Treatment Team250Commercial..0000January 200372003Genesis Assertive Community Treatment Team250Commercial..0000January 200372003Genesis Assertive Community Treatment Team250Commercial..0000January 200372003Genesis Assertive Community Treatment Team250Commercialthanks -Jim
View 2 Replies View RelatedLooping In SQL 2000 (Can It Be A Nested Loop)
Jul 20, 2005I have to automate a process that assigns sales leads to sales people.For example:Every day we buy a list of sales leads, it ranges in size from 50 -100 records.We have a team of sales people that also can range from 5 - 8 people.I need to take the new records and divide them evenly among the salespeople.If i get 50 records, and have 5 sales people, then each sales persongets 10 leads.--So, im guessing that I may need to have a nested loop inside this. Ihave tried it several different ways, but cant seem to get it quiteright.DECLARE @TotalRecordCount int, @TotalSalesPeopleCount int,@AmountForEach int, @LooperSalesPeoplerecords int,@LooperNewSalesLeadsRecords int, @SalesPersonID intSELECT @TotalSalesPeopleCount = COUNT(UserId)FROM SalesPeopleWHERE Active = 1--SELECT @TotalRecordCount = COUNT(*)FROM NewSalesLeads--SELECT @AmountForEach = (@TotalRecordCount/@TotalSalesPeopleCount)--SELECT @LooperSalesPeoplerecords = 1SELECT @LooperNewSalesLeadsRecords = 1--WHILE @LooperSalesPeoplerecords <= @TotalSalesPeopleCountBEGINWHILE @LooperNewSalesLeadsRecords <= @TotalRecordCountBEGINSELECT @SalesPersonID = (SELECT UserIDFROM SalesPeopleWHERE UniqueId = @LooperSalesPeoplerecords)SELECT @LooperSalesPeoplerecords =(@LooperSalesPeoplerecords + 1)UPDATE SalesLeadsSET SalesPerson_ID = @SalesPersonIDWHERE UNIQUEID = @LooperSalesPeoplerecordsSELECT @LooperSalesPeoplerecords =(@LooperSalesPeoplerecords + 1)ENDEND----Table structuresCREATE TABLE [dbo].[SalesPeople] ([SalesPerson_ID] [int] NOT NULL ,[FirstName] [varchar](20)NOT NULL) ON [PRIMARY]--INSERT INTO SalesPeople (SalesPerson_ID,FirstName) VALUES (26, 'Bill')INSERT INTO SalesPeople (SalesPerson_ID,FirstName) VALUES (28, 'Bob')INSERT INTO SalesPeople (SalesPerson_ID,FirstName) VALUES (37,'Chris')------------------------------------------------CREATE TABLE [dbo].[SalesLeads] ([SalesLeadID] [int]NOT NULL ,[SalesPerson_ID] [int]NOT NULL) ON [PRIMARY]--INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1001,0)INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1002,0)INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1003,0)INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1004,0)INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1005,0)INSERT INTO SalesLeads (SalesLeadID,SalesPerson_ID) VALUES (1006,0)------------------------------------------------So in this case, all 3 salespeople should receive 2 salesleads each.I dummied this down quite a bit. It actually ends up being more like15 sales people, and about 400,000 sales leads. But it should work onany level.Thanks for any help you might shed on this.
View 6 Replies View RelatedVariable Inside A Nested Loop
Jul 20, 2005I am trying to write a utility/query to get a report from a table. Belowis the some values in the table:table name: dba_daily_resource_usage_v1conn|loginame|dbname|cum_cpu|cum_io|cum_mem|last_b atch------------------------------------------------------------80 |farmds_w|Farm_R|4311 |88 |5305 |11/15/2004 11:3080 |abcdes_w|efgh_R|5000 |88 |4000 |11/15/2004 12:3045 |dcp_webu|DCP |5967 |75 |669 |11/16/2004 11:3095 |dcp_webu|XYZ |5967 |75 |669 |11/17/2004 11:30I need to write a query which for a given date (say 11/15/2004),generate a resource usage report for a given duration (say 3 days).Here is my query:************************************set quoted_identifier offdeclare @var1 intset @var1=0--BEGIN OUTER LOOPwhile @var1<=3 --INPUT runs the report for 3 daysbegindeclare @vstartdate char (10) --INPUT starting dateset @vstartdate='11/15/2004'--builds a range of datedeclare @var2 datetimeset @var2=(select distinct (dateadd(day,@var1,convert(varchar(10),last_batch,101)))--set @var2=(select distinct (dateadd(day,@var1,last_batch))from dba_daily_resource_usage_v1where convert(varchar (10),last_batch,101)=@vstartdate)set @var1=@var1+1 --increments a daydeclare @var5 varchar (12)--set dateformat mdy--converts the date into 11/15/2004 format from @var2set @var5="'"+(convert(varchar(10),@var2,101))+"'"--print @var5 produces '11/15/2004' as resultdeclare @vloginame varchar (50)declare @vdbname varchar (50)--BEGIN INNER LOOPdeclare cur1 cursor read_only forselect distinct loginame,dbname fromdba_daily_resource_usage_v1where convert(varchar (10),last_batch,101)=@var5--??????PROBLEM AREA ABOVE STATEMENT??????--print @var5 produces '11/15/2004' as result--however cursor is not being built and hence it exits the--inner loop (cursor)open cur1fetch next from cur1 into @vloginame, @vdbnamewhile @@fetch_status=0begin--print @var5 produces '11/15/2004' as resultdeclare @vl varchar (50)set @vl="'"+rtrim(@vloginame)+"'"declare @vd varchar (50)set @vd="'"+@vdbname+"'"--processes the cursorsdeclare @scr varchar (200)set @scr=("select max(cum_cpu) from dba_daily_resource_usage_v1 whereloginame="+@vl+" and dbname="+@vd+" and "+"convert(varchar(10),last_batch,101)="+@var5)--set @var3 =(select max(cum_cpu) from dba_daily_resource_usage_v1where--loginame=@vloginame and dbname=@vdbname--and convert(varchar (10),last_batch,101)=@var5)print @scr--exec @scrfetch next from cur1 into @vloginame, @vdbnameend--END INNER LOOPselect @var2 as "For date"deallocate cur1end--END OUTER LOOP************************************PROBLEM:Even though variable @var5 is being passed as '11/15/2004' inside thecursor fetch (see print @var5 inside the fetch), the value is not beingused to build the cursor. Hence, the cursor has no row set.Basically, the variable @var5 is not being processed/passed correctlyfrom outside the cursor to inside the cursor.Any help please.Thanks*** Sent via Developersdex http://www.developersdex.com ***Don't just participate in USENET...get rewarded for it!
View 3 Replies View RelatedNested Loop Vs. Hash Match?
Dec 20, 2007I have two queries that seem to be the same, but perform very differently. The first query runs very fast (7000+ records returned in <1 sec.). The execution plan shows that it uses a nested loop with index seeks on both tables.
select *
from t_loadbasic
where ld_nbr in (select ld_nbr from t_tripcombined where comp_date between '11/1/07' and '11/05/07')
The second query is almost the same, save the fact that it uses date variables instead of hard dates. The execution plan shows that it uses a hash match instead of a nested loop with an index scan on the main table (t_loadbasic). This query takes about 12 seconds to run.
declare @startdate datetime
,@enddate datetime
set @startdate = '11/1/07'
set @enddate = '11/5/07'
select *
from t_loadbasic
where ld_nbr in (select ld_nbr from t_tripcombined where comp_date between @startdate and @enddate)
I'm trying to figure out why the database executes these two statements so differently. BTW, I've tried switching the order of the tables. I've tried using joins instead of a subquery. The execution plan seems completely dependant on the use of variables. I can attach the execution plans if necessary.
I apologize if this is too simple a question, but I couldn't find an answer on any forums, web searches or BOL. Thanks in adavance.
Problem Of Inserting In A Nested WHILE Loop In SProc
Jan 17, 2008Hi friends, I've been stumped on this for almost a week now. Everything works in the stored procedure code below except for the 'INSERT INTO @Uppdates' block of code. I have a SQL Analyzer test driver and when the code gets to the SELECT statement below the INSERT INTO @Updates line the value of the select line is displayed on the screen and nothing gets written to @Updates. I hope I'm being clear about this. Any ideas? IF @Edit=1 AND LEN(@Changes) > 0
BEGIN
--Split and parse changes
DECLARE @curRec int, @nxtRec int, @Record varchar(8000), @TNum int, @TNam varchar(50), @PDesc varchar(512), @PChk varchar(8), @SNum varchar(12), @NScr varchar(10), @OScr varchar(10),
@curField int, @nxtField int, @curSRec int, @nxtSRec int, @subRec varchar(8000), @curSField int, @nxtSField int
DECLARE @NewProj table (
ProjectID int,
SchoolNumber varchar(20),
ArtTeacherNumber int,
TeacherNumber int,
TeacherName varchar(40),
ProjectDescription varchar(512) NULL,
[Checksum] varchar(20) NULL)
DECLARE @Updates table (
ProjectID int,
StudentNumber varchar(12),
NewScore varchar(10) NULL,
OldScore varchar(10) NULL)
SET @curRec = 1
WHILE @curRec IS NOT NULL
BEGIN
SET @nxtRec = NULLIF(CHARINDEX(CHAR(1), @Changes, @curRec), 0)
SET @Record = SUBSTRING(@Changes, @curRec, ISNULL(@nxtRec,8000)-@curRec) --Extract a class record
SET @curField = 1
SET @nxtField = NULLIF(CHARINDEX(CHAR(2), @Record, @curField), 0)
SET @TNum = SUBSTRING(@Record, @curField, ISNULL(@nxtField,1000)-@curField) -- Extract Teacher Number
SET @curField = @nxtField + 1
SET @nxtField = NULLIF(CHARINDEX(CHAR(2), @Record, @curField), 0)
SET @TNam = SUBSTRING(@Record, @curField, ISNULL(@nxtField,1000)-@curField) -- Extract Teacher Name
SET @curField = @nxtField + 1
SET @nxtField = NULLIF(CHARINDEX(CHAR(2), @Record, @curField), 0)
SET @PDesc = SUBSTRING(@Record, @curField, ISNULL(@nxtField,1000)-@curField) -- Extract Project Description
SET @curField = @nxtField + 1
SET @nxtField = NULLIF(CHARINDEX(CHAR(3), @Record, @curField), 0)-- Step over existing checksum
SET @PChk = RIGHT('0000000' + dbo.int2base(Checksum(@PDesc),16),8)-- Calculate new checksum based on project description that may have been changed.
SET @curField = @nxtField + 1
INSERT INTO @NewProj (ProjectID, SchoolNumber, ArtTeacherNumber, TeacherNumber, TeacherName, ProjectDescription, [Checksum])
SELECT DISTINCT Students.ProjectID, @SchoolNumber, @ArtTeacherNumber, @TNum, @TNam, @PDesc, @PChk
FROM @Students Students
WHERE Students.SchoolNumber=@SchoolNumber AND Students.TeacherNumber=@TNum
SET @curSRec = 1
WHILE @curSRec IS NOT NULL
BEGIN
SET @nxtSRec = NULLIF(CHARINDEX(CHAR(3), @Record, @curField), 0)
SET @subRec = SUBSTRING(@Record, @curField, ISNULL(@nxtSRec,8000)-@curField) -- Extract a score sub record. Consists of Student Number, new Score, old Score.
SET @curSField = 1
SET @nxtSField = NULLIF(CHARINDEX(CHAR(4), @subRec, @curSField), 0)
SET @SNum = SUBSTRING(@subRec, @curSField, ISNULL(@nxtSField, 1000)-@curSField) -- Extract Student Number
SET @curSField = @nxtSField + 1
SET @nxtSField = NULLIF(CHARINDEX(CHAR(4), @subRec, @curSField), 0)
SET @NScr = SUBSTRING(@subRec, @curSField, ISNULL(@nxtSField, 1000)-@curSField) -- Extract new Score
SET @curSField = @nxtSField + 1
IF @curSField > LEN(@subRec)
SET @Oscr = NULL-- If no Old Score specified
ELSE
BEGIN
SET @nxtSField = LEN(@subRec) + 1
SET @OScr = SUBSTRING(@subRec, @CurSField, ISNULL(@nxtSField, 1000)-@curSField) -- Extract old Score
END
-- Check for errors
IF ISNUMERIC(@SNum) = 0 OR @NScr IS NULL OR LEN(ISNULL(@PChk,0)) <> 8
BEGIN
SET @UpdateErr = 1
BREAK
END
-- Update the updates table and find ProjectID from existing data table
INSERT INTO @Updates (ProjectID, StudentNumber, NewScore, OldScore)
SELECT DISTINCT Students.ProjectID, @SNum, @NScr, @OScr
FROM @Students Students
WHERE Students.StudentNumber=@SNum
SET @curField = @nxtSRec + 1
SET @curSRec = @nxtSRec + 1
select * from @Updates
END
IF @UpdateErr = 1
BEGIN
BREAK
END
SET @curRec = @nxtRec + 1
END
Thanks in advance for looking at this,
How Can I Generate Variables Automatically?
Dec 20, 2007Hi there
I need to generate some variables , like var1, var2, var3 ....
It's determined by how many records in my database.
I want to write a for() to do this. But how?
For example
for(int i=0; i<datatable.rows.count; i++){ String vari = new String;}
This is not a right way in C#, does anyone know how to?
Thanks!!!
SQL Server 2012 :: Using Variables To Generate The Command?
Sep 17, 2015I am trying to use variables to generate the command:
USE DATABASE
GO
Code below:
DECLARE @DBName_Schema varchar(500)
SET @DBName = 'Test'
EXEC ('USE ' + @DBName )
GO
It does not seem to be working.
How To Write Query To Generate Result Like This?
Mar 21, 2008hi,
For example, i have a query result like this:
UserID Key
1 AN
1 AC
1 MN
2 KK
2 VC
I would like to generate result like this:
UserID Keys
1 AN*AC*MN
2 KK*VC
Is there any way to do it in sp?
Thanks.
How Do I Loop Thru A Result Set?
Jul 20, 2005How do I loop thru a result set Without using a curosr?
View 5 Replies View RelatedFor Loop * Sql Task Question About Variables
Oct 18, 2007I want to iterate through a for loop and run some SQL update statements:
I have a variable wk_day that has a scope of the container
I want it to run this code:
update daily_sls_curr set mtd_ty_sls = (
select sum(ty_sls) from daily_sls_curr ci
where ci.fmonth = (select max(fmonth) from daily_sls_curr)
and wk_day <=@wk_day
and ci.store = daily_sls_curr.store
group by store)
where fmonth = (select max(fmonth) from daily_sls_curr)
and wk_day = @wk_day
repeatedly from the loop for 35 days of the fiscal month
When I parse the query, it gripes at the variable
How do I set up the query to work with the variable?
Thanks
JPS
Variables In Data Flow In For Each Loop
Sep 8, 2007how to pass the variables as the data source in data flow in for each loop( ADO enumerator)?
View 1 Replies View RelatedLoop Through Result Set Using Value In Query
Mar 27, 2012I have to pull values from a mysql table, then loop through the result set using the value in an mssql query as shown below. I also have an array ($all_lobs[]) of about 100 values that must be looped through for each value pulled from the mysql table:
$tod=date("n/j/Y",time());
//this is pulling the data from the mysql table
$query2="select CustId from prospect_CustId ";
$result2=mysql_query($query2,$link_id_mysql);
while($custs=mysql_fetch_row($result2))
[Code] .....
If I pull only 100 records from the mysql table, this takes about 1 second to run. However, if I pull 200 records, it takes about 60 secs to run. And, if I pull 300 records, it takes about 200 secs to run. After about 500 records, it takes almost a second per record to run!
Since I have 20,000+ records to pull, this takes hours...
Unfortunately, we are not allowed to modify the mssql tables at all, only query them.
Transact SQL :: Write Query To Generate Customized Result?
May 24, 2015I have a dataset which is like:
Month, Day, Location, TotalSales
Jan    1     A 100Â
Jan    1     B 200Â
Jan     14    A 120Â
Feb     2     A 130Â
Mar     5     B 150Â
I want to transform the dataset using sql query into the following format:
Month, Day, LocationATotalSales, LocationBTotalSales, TotalSales
Jan    1       100            200              300
Jan    14      120             0               120
Feb    2       130             0               130
Mar    5         0           150              150
Logging The Foreach Loop Container's Variables
Apr 23, 2008Hello
I would like to loop through a folder and then log the folder's content, as in the names of the files, into a database like all the events get logged. Here is what i have done. I put some files into the folder c: emp made a loop through it, set up a variable 'temp' scope is the foreach loop, set the variable raisechangedevent to true. I have also confgigured the loop to put the result of the looping, in the temp variable in the variable mappings tab.
Strangely nothing is recorded into the "execution results" when i test run the package ? Do i need to make a event handler for the onvariablevaluechanged event for the foreach loop container to be able to get the value of the variable logged or is there something other that i'm missing ?
Programmatically Loop Over Variables In The Variable Dispenser?
Jun 16, 2006In my custom task, I would like to loop over the variables in the variable dispenser, and only modify those that are of a certain type. Is this possible?
Thanks!
SQL 2012 :: Generate Scripts Result In Order Of Tables And Then Stored Procedures In Server
Sep 10, 2014I have created one table and one stored procedure for to insert/delete/update the data in that table.
So,I was trying to move the scripts from one database to another by Generating Scripts options in SQL Server.
Generating Scripts:
Object Explorer --> Databases --> Database --> Tasks --> Generate Scripts
The generated script output is in a order of stored procedure first and then table.
REQUIREMENT: My stored procedure is dependent on table. So, I need the table script first and then stored procedure.
Note: I can generate two separate scripts for table and stored procedure, But in a just curiosity to know, Is there any way, can we re order the Generate Scripts output in SQL Server.
Integration Services :: SSIS Foreach Loop Container Passing Variables To Store Procedure
Sep 8, 2015I am having a challenge to pass the filename variable from SSIS Foreach Loop Container to SQL store procedure. I have an "Execute SQL Task" inside "Foreach Loop Container" which will receive the input filename parameter passed by the Foreach Loop Container. The store procedure command line is defined as "EXEC sp_mySQLStoreProcedure ?" within the "Execute SQL Task". The Foreach loop container will gather the filenames from File System then put it in the filename variable one by one. I would like to pass the filename variable as the input parameter to the sp_mySQLStoreProcedure in the "Execute SQL Task". How can I connect the variable and the store procedure so that it will process all the input files gathered by the Foreach Loop Container?
View 4 Replies View RelatedSQL Server 2012 :: Write A Loop On Result Of First Query Inside A Stored Procedure
Jan 23, 2015I have to write a Stired Procedure with the following functionality.
Write a simple select query say (Select * from tableA) result is
ProdName ProdID
----------------------
ProdA 1
ProdB 2
ProdC 3
ProdD 4
Now with the above result, On every record I have to fire a query Select SUM(sale), SUM(scrap), SUM(Production) from tableB where ProdID= ["ProdID from above query"].How to write this query in a Stored Procedure so that I can get the required SUM columns for all the ProdID's from first query?
SQL Server 2008 :: Difference Between FOR LOOP And FOREACH LOOP?
May 28, 2010difference between FOR LOOP and FOREACH LOOP with example(if possible) in SSIS.
View 4 Replies View RelatedExecute DTS 2000 Package Task Editor (Inner Variables Vs Outer Variables)
Sep 4, 2006 Hi,
I am not comfortable with DTS 2000 but I need to execute a encapsulated DTS 2000 package from a SSIS package. The real problem is when I need to pass SSIS variables to DTS 2000 package. The DTS 2000 package have 3 global variables that I can identify on " Execute DTS 2000 Package Task Editor - Inner Variables ". I believe the SSIS variables must be mapped on " Execute DTS 2000 Package Task Editor - OuterVariables ". How can I associate the SSIS variables(OuterVariables ) to "Inner Variables"? How can I do it? Much Thanks.
João
Loop Though Table Using RowID, Not Cursor (was Loop)
Feb 22, 2006I have a table with RowID(identity). I need to loop though the table using RowID(not using a cursor). Please help me.
Thanks
How To Design A Package With Variables So That I Can Run It By Dos Command Assigning Values To Variables?
Jan 24, 2006Hi,
I would like to design a SSIS package, which have couple of variables. It loads a xls file specified in a variable [varExcelFileFullPath] .
I will run it by commands: exec xp_cmdshell 'dtexec /SQL ....' (pls see an example below).
It seems it does not get the values passed in for those variables. I deployed the package to a sql server.
are there any grammar errors here? I copied it from dtexecui. It worked inside Dtexecui not in dos command.
exec xp_cmdshell 'dtexec /SQL "LoadExcelDB" /SERVER test /USER *** /PASSWORD ****
/MAXCONCURRENT " -1 " /CHECKPOINTING OFF /REPORTING EW
/LOGGER "{6AA833A1-E4B2-4431-831B-DE695049DC61}";"Test.SuperBowl"
/Set Package.Variables[User::varExcelFileName].Properties[Value];"TestAdHocLayer"
/Set Package.Variables[User::varExcelWorkbookName].Value;"Sheet1$"
/Set Package.Variables[User::varExcelFileFullPath].Value;"D: estshareTestAdHocLayer.xls"
/Set Package.Variables[User::varDestinationTableName].Value;"FeaturesTmp"
/Set Package.Variables[User::varPreSQLAction].Value;"delete from FeaturesTmp"
'
thanks,
Guangming
Set Variable Based On Result Of Procedure OR Update Columns Fromsproc Result
Jul 20, 2005I need to send the result of a procedure to an update statement.Basically updating the column of one table with the result of aquery in a stored procedure. It only returns one value, if it didnt Icould see why it would not work, but it only returns a count.Lets say I have a sproc like so:create proc sp_countclients@datecreated datetimeasset nocount onselect count(clientid) as countfrom clientstablewhere datecreated > @datecreatedThen, I want to update another table with that value:Declare @dc datetimeset @dc = '2003-09-30'update anothertableset ClientCount = (exec sp_countclients @dc) -- this line errorswhere id_ = @@identityOR, I could try this, but still gives me error:declare @c intset @c = exec sp_countclients @dcWhat should I do?Thanks in advance!Greg
View 4 Replies View RelatedProblem Assigning SQL Task Result To A Variable - Select Count(*) Result From Oracle Connection
Dec 26, 2007
I have an Execute SQL Task that executes "select count(*) as Row_Count from xyztable" from an Oracle Server. I'm trying to assign the result to a variable. However when I try to execute I get an error:
[Execute SQL Task] Error: An error occurred while assigning a value to variable "RowCount": "Unsupported data type on result set binding Row_Count.".
Which data type should I use for the variable, RowCount? I've tried Int16, Int32, Int64.
Thanks!