Can someone explain the generated sprocs of VS2005 if one column can be nullable
DependentOfSeqID = @Original_DependentOfSeqID OR ((@IsNull_DependentOfSeqID = 1) AND (DependentOfSeqID IS NULL))
In VS2003 the generated sprocs would be
DependentOfSeqID = @Original_DependentOfSeqID OR ((@Original_DependentOfSeqID IS NULL) AND (DependentOfSeqID IS NULL))
Which is the best?
Hi,
Is it possible to rollback changes made to the DB when debugging a t-sql sproc in VS2005? i.e. step through the sproc, then hit rollback and be able to step through it again in the same state
Thanks, moff.
I am wondering what the advantages of using CRL Sprocs over T-SQL sprocs and what not.
Looking for such comparison and articles on websites resulted in only "how to create CRL sprocs" but none of them were talking about what they are used for in what situations.
I would really appreciate it if you guys can post comments, links and external articles.
Thank you in advance.
Hello
I tried the Beta 1 of the service pack 1 to .net 3.5. If I try to add an entity (and try to save this), I get the Exception "No support for server-generated keys and server-generated values".
How can I add entities to my Sqlce- database?
I tried to give the id- column (primary key) in the database an identity, another time without identity, only primary key --> none of them worked. I always get the same error.
What do I have to change to make successfully a SaveChanges()?
Thanks for your help,
Gerald
I find the replication put many sprocs with sp_ prefix in our database. Do you think that should be changed? I have been told not to use sp_. See http://www.sqlmag.com/Article/ArticleID/23011/sql_server_23011.html.
View 3 Replies View Relatedi have a question. how do i protect my website from sql injection.right now most of my queries are in the form of: Public Sub updateCredits(ByVal deduct As Int16, ByVal userid As Guid) Dim cmd As New SqlCommand Dim con As New SqlConnection(ConfigurationManager.ConnectionStrings("LocalSqlServer2").ConnectionString) cmd.Connection = con cmd.CommandType = Data.CommandType.Text cmd.CommandText = "Update [userprofile] SET credits = credits - @c WHERE userID= @id" cmd.Parameters.Add("@id", SqlDbType.UniqueIdentifier).Value = userid cmd.Parameters.Add("@c", SqlDbType.Int).Value = deduct Using con con.Open() cmd.ExecuteNonQuery() con.Close() End Using cmd.Dispose() End Sub is that a safe way to do it? using parameters and stuff? or should i completely switch over to stored procedures as i hear they are safer.
View 12 Replies View RelatedI know you can use sql profiler to see what sqlcode actually executed when you run a sproc, but is there any way toget this information in asp.net? After executing a sproc, I'd like to send the sqlcode that was sent, to my Audit class. Is there any wayto retrieve this in asp.net itself?cheers!
View 1 Replies View RelatedWhile trying to assign a variable a table name then later use the variable name in a select statement (ie select sys_id from @table_name) it fails and says incorrect syntax.
How can I use a variable for a table name to later use within the sproc?
is it possible to have a sproc with a input parm of a column name and have this column name be inserted into an exec statement that runs and provides the output as a OUTPUT parm instead of a result set?
i can get the sproc to take the column name as a parm, run the exec, but cannot figure out how to assign the "dynamic sql" output to a OUTPUT variable instead of returning the result set.
I know that stored procedures(sql server) caches stored procedures in memory where it keeps the compiled execution plan in memory, how does it work with the views does sql server store /cache the views. Just wondering Thanks
View 2 Replies View RelatedHello,
I have 3 stored procedures.
A, B, C
sproc B has input variable of int
In sproc A, I want to execute B, then C and UNION them together
Can some one possible help me out with syntax?
Thanks a lot.
Due to a business rule change, I had to take what was 1 column in a table and split it off into a new table. Now I need to find every time that column is used in a SPROC and change those sprocs. Is there a way to sift through the sprocs to search for a "phrase" (the column name) -- other than reading through every one manually?
Thanks
Mark
there's a concept named cyclomatic complexity in software dev which measures the complexity of code by its number of decision points. This would be measured by # of if statements, nested if statements, etc in a method.
Do SQL queries have any type of equivalent? For example, # of joins, # of conditions, etc. Factors into a complexity metric which indicate how complex, risky or error-prone a sproc might be based on certain factors?
I've been using EM for writing stored procedures. I am ready to upgrade to something that works like an IDE. What do you use?
View 7 Replies View RelatedAnyone have the code that would allow me to see if any of my sprocs contain references to a function? I imagine it would someting like select name from sysobjecst where charindex(whatevertextis, 'ufnName') > 0
Thanks
We have a growing number of servers and databases on each server that all share the same (sub)set of sprocs and UDFs. DTS packages, which we use for data import, frequently need to be copied between the servers. What is the best way to maintain this? Ideally, I would like to be able to click a button and have a script creating or altering one or more sprocs automatically run aginst all DBs on all servers. Likewise, I'd like to be able to copy DTS packages to all servers.
We use SS2000 SP4 and plan to migrate to SS2005. We also use ASP.net 2.0 and VS 2005 SP1.
Hello.
I'm using what looks to be a popular script to grant execute privileges to stored procedures, and it works great as long as the user account that you want to grant to is not a domain account.
For example, I need to grant execute to myDomaindbUsers, but get a syntax error when the script tries to execute this statement:
SET @SQL = 'GRANT EXECUTE ON [' + @Owner
+ '].[' + @StoredProcedure
+ '] TO myDomaindbUsers'
Incorrect syntax near ''.
The script works fine if a non-concatenated user account is given.
We use Active Directory to manage our access, thus the domaingroup.
Has anyone found a way around this?
Thanks in advance.
Tess
Here's the entire script for anyone who's interested:
USE whateverDatabase
GO
DECLARE @SQL nvarchar(4000),
@Owner sysname,
@StoredProcedure sysname,
@RETURN int
-- Cursor of all the stored procedures in the current database
DECLARE cursStoredProcedures CURSOR FAST_FORWARD
FOR
SELECT USER_NAME(uid) Owner, [name] StoredProcedure
FROM sysobjects
WHERE xtype = 'P'
AND OBJECTPROPERTY(OBJECT_ID(QUOTENAME(USER_NAME(uid)) + '.' + QUOTENAME(name)), 'IsMSShipped') = 0
AND name LIKE 'p%'
OPEN cursStoredProcedures
-- "Prime the pump" and get the first row
FETCH NEXT FROM cursStoredProcedures
INTO @Owner, @StoredProcedure
-- Set the return code to 0
SET @RETURN = 0
-- Encapsulate the permissions assignment within a transaction
BEGIN TRAN
-- Cycle through the rows of the cursor
-- And grant permissions
WHILE ((@@FETCH_STATUS = 0) AND (@RETURN = 0))
BEGIN
-- Create the SQL Statement. Since we€™re giving
-- access to all stored procedures, we have to
-- use a two-part naming convention to get the owner.
SET @SQL = 'GRANT EXECUTE ON [' + @Owner
+ '].[' + @StoredProcedure
+ '] TO myDomaindbUsers'
-- Execute the SQL statement
EXEC @RETURN = sp_executesql @SQL
-- Get the next row
FETCH NEXT FROM cursStoredProcedures
INTO @Owner, @StoredProcedure
END
-- Clean-up after the cursor
CLOSE cursStoredProcedures
DEALLOCATE cursStoredProcedures
-- Check to see if the WHILE loop exited with an error.
IF (@RETURN = 0)
BEGIN
-- Exited fine, commit the permissions
COMMIT TRAN
END
ELSE
BEGIN
-- Exited with an error, rollback any changes
ROLLBACK TRAN
-- Report the error
SET @SQL = 'Error granting permission to ['
+ @Owner + '].[' + @StoredProcedure + ']'
RAISERROR(@SQL, 16, 1)
END
GO
Hi,
I really confused , I wanna get an rowid on sql 2000 table so I have created a sproc and it's syntax is OK
How can I check it on sql query analyzer? this sql server 2000
Also How can I use that in select statement?
thanks..
here is my select statement which I have to use sproc inside
select custid,ordernum,sku,amount,
dbo.get_rownums (custid,ordernum,sku ) ???
from tp_cod cod
here is my sproc:
CREATE PROCEDURE [dbo].[get_rownums] @custid as varchar(10),@ordernum as varchar(5),@sku as varchar(10) , @i as int output
AS
BEGIN
DECLARE @SkuID as varchar(10)
--DECLARE @i as int
DECLARE got_sku CURSOR FOR
Select sku from tp_cod where custid=@custid and ordernum=@ordernum
set nocount on
set @i=0
OPEN got_sku
FETCH NEXT FROM got_sku INTO @SkuID
WHILE @@FETCH_STATUS = 0
BEGIN
Set @i =@i + 1
if @SkuID=@sku
begin
return @i
end
else
begin FETCH NEXT FROM got_sku INTO @SkuID end
END
CLOSE got_sku
DEALLOCATE got_sku
END
GO
Hi,
Just a general question here.. I'm designing a web application that might have 50 million - 100 million rows plus. Basically its a simple logging table each row probably only 24 bytes wide, however I can see it taking quite awhile to execute.
The query is basically a group by, showing the amount of "hits" per day.
Are there any special types of strategies I should implement ? Or is a properly designed structure with indexes likely sufficient (on the right hardware of course)
Thanks for any advice!,
Mike
Are there any issues calling SQL 2005 CLR bases stored procedures and functions from a web application which uses the dotnet 1.1 framework?
I assume not, but would like advice from those who've been there...
Thanks,
Marie
I have been attempting to create a managed stored procedure which calls a web service using WSE 3.0 for security.
It appears that the WSE-generated config file (or possibly the app.config file) is not accessible to the .Net code.
Is there a method for using config files with CLR managed sprocs?
Thanks,
Max
In Enterprise Manager one can select several SPROCS/VIEWS using the CONTROL key and then Right-Click to script out those objects. Alternativly, pressing CONTROL-C copies, to the clipboard, the T-SQL to create the selected objects.
SQL Management Studio seems to only allow you to script one object at a time.
Is there a way in SQL Management Studio to select multiple objects and generate create or modify scripts?
There are plenty of scripts to do this on a per-DB level, but any that will allow me to generate a script for all DB's at once? Mine are split across dozens and it would be much easier to do a loop (using MS_ForeachDB ? )
View 1 Replies View RelatedWe have migrated a database (myDb2014)Â to a SQL Server 2014 instance. We have another on a 2008R2 instance (myDb2008). Both on the same server.
I have setup a linked server to the 2014 instance from the 2008R2 one.
I have a number of sprocs on myDb2008 that call TVFs and sprocs on myDb2014. This worked fine when they were both on the same instance.
Now however, I have an issue where I would have to update all the references in each calling query.
I looked into creating Synonyms but this only works for Tables/Views.
Is there a workaround to querying myDb2014 TVFs/sprocs without having to update each calling query in myDb2008?
I need just the names of tables, views and sprocs within a SQL Serverdatabase. What's the easiest way to do this?
View 3 Replies View Related
Hi,
I was going to use Sql compact 2005 with vs2005 and use merge replication with MSDE2000. Unfortunately I found out this isnt possible (only possible if I use SQL Server 2000)
Has I can replicate with MSDE2000 with Sql CE 2.0 the question is:
Can I use sql ce 2.0 with vs2005 and windows CE 5???
Do I use the same System.Data.SqlServerCe assembly?
I hope someone can reply to this.
Thanks,
Luis
I am running VS2005 Pro edition. I have downloaded, but not installed, SQL Express with Advanced Services SP1. Can I install it over the VS2005 version of SQL Express or do I have to do some install work?
Also, regarding the Books Online July version, must I do a clean install or can I just install it over whatever came with VS2005?
Thanks
Hi, i'm looking for SQL CE 3.5 for Visual Studio 2005. I am currently using SQL CE 3.1 and wish to use the System.Transactions support which has been included in v3.5.
I know Orcas includes v3.5 but i need to continue using VS2005. Is there an installer or similair so i can develop applications with SQL CE 3.5 with my current development environment? I see there is a new SQL CE sync installer which includes the 3.5 runtime files, however ideally i would like the sdk so i can use the dataset designer. Is it possible?
Thanks
Hello I opened vs2005,new->project->analysis services project ,clicked OK, then dragged a data flow task from the toolbox to the area ,after I double clicked data flow task it gave me error message as shown in the link , what is wrong?
[URL=http://imageshack.us][/URL]
F16 LĂ?GHTĂ?NĂ?NNNG
<edit> To remove the shouting </edit>
Hi, not sure I have should ask this in here or in the VS forums - but here goes anyway!
My vb app is written using VS2005 with an SQL database. I'm now distributing this to users to use with SQL Express.
It's hard enough explaining to them how to attach the database without going into the backup routines etc!
So what I'd like to do is to have a "backup" button in my app, that backsup the database, trancates the log files & then shrinks the files.
Is this possible?
I'm a newbie to both Windows Forms development and SQL Server CE, so please bear with me...
I am developing a vocabulary builder application, and my data keeps reverting to the data set I originally imported. I keep losing the records I've added using the application I'm developing, or from within VS2005. I know about the 'Copy To Output Directory' option in the Solution properties and I set this to 'Do not copy'.
What gives? Not sure what other information you might need, but I suspect it's something really basic...
Thanks!
When I try to add a new database to App_Data in a VS2005sp1 project I get "Failed to generate a user instance of SQL Server due to a failure in starting the process for the user interface".
I have SQL2005sp2 and SQL Express on the system, both services are running, and an instance of the latter called SQLExpress which I can use through SQL Server Management Studio. sp_configure user instances enabled is set to 1. The SQL Server Instance Name in Options | Database Tools | Data Connections is set to SQLExpress ...
I have no idea how to proceed .. any ideas anyone?
Thanks
John
Hi all,
I hope I am on a suitable thread. Sorry if I'm not. I just need to know if I need a license in order to write a commercial application using Visual Studio 2005. And, if so, is this license necessary to me as a developer or to my customer that will purchase the application at the end?
And something more. ASP.NET runs on IIS, which is shipped with Windows Server, correct? So, once my customer purchases Windows, he doesn't anything more in order to run a ASP.NET application (which will finally access the SQL Server DBMS). Is this correct?
Thanks in advance
Lambros